Nokia E75 to Nokia bluetooth CK-1W car kit

Hi Folks,
have seen several posts aboutbluetooth connectivity between E75 and non-nokia bluetooth devices. I bought a car with a Nokia CK-1W car kit in it.
Connected beautifully with my wifes Motorola V3 first time no problems.
Bought myself a new Nokia E75 - connects once to the car kit, then wait for a while and at some point - not long after the power save mode the connection is lost. NOte it is not when the power save kicks in but some time afterwards. I have tried to set "Remote SIM on" but cannot seem to find an answer. I have even checked for the latest firmware this evening and I have the latest version.
Can any body help or is it to much to ask for one piece of Nokia Kit to connect to another piece of Nokia kit.

I have same kind of problems between my E75 and MB R-class carkit. First they are connected and few seconds later disconnected. I have lost my nervs...

Similar Messages

  • Bluetooth FM transmitter car kit with N73me

    Hi,
    I have a Bluetooth FM transmitter car kit for my N73me, everything works great...except the below issue, pls let me know if any settings needs to be changed in my N73
    issue: I am able to transfer music thru Bluetooth (to my car stereo using FM), problem is when I get a incoming calls while the music is playing the car kit is not picking up the call...instead I get the call in my cell phone. (if i don't play music everything works gr8)
    I contacted the car kit support guys and they say..n73 doesn't support A2DP profile...is it true? I have 4.0727.2.2.1 software in my n73ME

    I've tested, VW, AUDI, SEAT, SKODA, PARROT,KUFATEC and have not been able to transfert my phone book at all..
    I'm still hoping the Rsap profile will be added one day, my phone is useless on any car kit, no Rsap and no phonebook in HFP mode!!

  • BB Z10 can`t connect to my bluetooth hans free car kit

    I was reading a lot of forums, web pages, etc... and i cant find the anwers to my problem...
    I bought a new Z10 and i cant connect to my car via bluetooth.. I have a Audi Kufatec Fiscon Car kit, integrate with the radio and with the multifuncional sterling wheel ...
    I have the last version of OS 10 (10.1.0.273) 
    Any advice will be apreciate...
    Thank You

    This might help
    http://nickscarblog.com/diy/fiscon-bluetooth-retrofit-audi-a4s4-with-rns-e/
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Synchronization of 8330 bluetooth with Audi car kit

    I have been able to synchronize my new 8330 via bluetooth to my Audi car kit with one problem. When an incoming call arrives, the car display shows "phone" but the phone does not ring on the car speaker. A short while later a loud 5 second "buzz" occurs. My previous Motorola phone rang on the car speaker. Do I need to set something in the 8330? The car kit has no settings. Help would be appreciated.
    Thanks,
    Bubba1805

    Hi.,
    Can I check with you if you have this problem..
    I assume you have paired the iPhone 3GS to the Audi carkit.
    First, play something on the iPod.
    Then go to the Bluetooth settings page where you can see all the paired devices.
    after that, make a connection to the carkit.
    Is there any stuttering or audio breaking you hear from the carkit?
    I have this problem with my iTech BluebandR headset and iSkin Cerulean RX. I only found this problem with iPhone 3GS but it worked fine with 3G.

  • C7 - Bluetooth connection with car kit - problem

    Hi all,
    Can anyone help me about my problem. I bought new phone Nokia C7 with Anna software and I have a problem with pairing with my car (Bluetooth device Parrot CK3000 Evo). I think that the problem is with phone, because when I paired devices all things work well, but when I turn off the car (Parrot is switched off) and go away, other phones that I previously used disabled connection and can be used normally. But with this phone I see that for the phone connection still present (?!?) The car symbol on display still shown, and when I try to use the phone, I can make call, other people say that they receive calling , but I can't hear them, and they can't hear me. When I manually disconnect Bluetooth device, phone work normally, but when I am in the car again, two devices doesn't initiate pairing, and again I have to do this manually. It' a huge problem for me.
    Is there anyone who have the same problem, or anyone who know how to solve this. I  couldn't find option to solve this from menus.
    Any ideas?
    Unfortunately my warranty doesn't allow me to change software version from 022.014 to another... but if this will help...

    Thank you for your reply,
    Do you think, that the solution is new update for Parrot device?
    As I understand, you still have the problem and your hope is this update eventually.
    Do you read somewhere something about this?
    I have registration in Parrot forum, but I haven't read inside anything about  the problem . It looks, that they never heard about it...

  • Nokia C7-00 & Kufatec FISCON Bluetooth Car Kit

    Hello everybody!
    I just updated my C7-00 with latest Symbian Anna 022.014.
    Very nice user interface, updated browser, all applications 100%-compatible.
    I do have a serious problem with my Bluetooth car kit (Kufatec FISCON using CK5050+ chipset, SW 3.23.5). The phone pairs with the kit, synchronizes content (contacts and call registers). When I disconnect (turn off ignition and leave the car), the phone hangs and displays the bluetooth connection as already established.
    Things were working very well with latest Symbian version (014.XXX).
    I think this is a bug in Anna Bluetooth stack. Does anyone have any clue?
    The problem occurs once the phone contacts are synchronized with the car kit.
    When I disconnect just after pairing (before complete synchronization) the phone behaves normally (ie. connection is dropped).
    Is it possible that the phone does not complete disconnect request from car kit?

    Hello,
    Did you solve the problem?
    Too late I saw your post, but my problem is completely the same:
    /t5/Cseries/C7-Bluetooth-connection-with-car-kit-problem/td-p/1192491

  • Nokia E70 + car kit 7W

    Hi, I have car kit 7W installed in my car already. Do you know if Nokia E70 is working with that? By the web site of Nokia it is not compatible but I can´t believe that.´
    thanks

    Grateful you can confirm that the E70 does work with the Bluetooth CK-1W car kit ??
    Many Thanks
    SteveJ
    12-Jul-2006
    03:09 PM
    thebeardedone wrote:
    well according to the nokia site it's not listed as a compatible car kit. but you have 3 other to choose from.
    The CK-20W,616 Car Kit, and the CK-1W.
    Peace
    TheBeardedOneMessage Edited by thebeardedone on 12-Jul-2006
    03:13 PM

  • About TV-out in nokia E75

    I reseve this message in my nokia e75 from nokia
    Tip:Enjoy your photos and videos on a big screen. Connect your device to a TV and watch your favourite photos and videos in a slide show >>>
    what that mean ?????????

    I receive this message from Nokia
    this is message details :
    From :
    Nokia
    Date:
    16/09/2010
    type:
    Text message
    thank you for reply
    Attachments:
    Scr000003.jpg ‏42 KB

  • Re: Bluetooth Related Issues with Car kits regarding the Palm Pre Post 1.2.1

    Make/Model:  Nissan Maxima
    Year:  2007
    Carkit Model info (Manufacturer, firmware version, etc):  OEM with Nav
    Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc) 
    Since updating to webOS 1.3.5, the connect and disconnect problems have mostly gone away!  Thank you Palm! 
    One minor complaint still with Bluetooth (if you are listening Palm):  The Nissan OEM kit supports up to 4 phones.  I paired my wife and kid's phones to the car, including my Pre.  When any other family member is in the car with me with their phone (non-Pre), my Pre will not connect to the car.  Their phones connect just fine even though my phone has been paired to the car to be the "primary" phone.  Only when I am by myself in the car will the Pre Bluetooth connect/disconnect work flawlessly.   Thanks again for getting us this far!
    webOS version:  1.3.5

    We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
    If you are having issues around using Bluetooth with your Car Kit please post the information in this thread. 
    Please also use this template so it is easiest for us to extract this data
    Make/Model:
    Year:
    Carkit Model info (Manufacturer, firmware version, etc):
    Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
    webOS version:
    Included in compatibility list:
    To find out if your carkit is listed on Palm's compatibility chart see here
    http://kb.palm.com/wps/portal/kb/common/article/50373_en.html
    Further information:
    Please remove all previous pairing from both devices and carkits before deeming it an "issue." We attempt to diagnose and identify all issues, however some issues are simply resolved by removing pairing from both the device and the carkit and then resetting the connection back up.
    It may be important to check back regularly. If it becomes an issue that we would like to diagnose further we may ask for help from the community by contributing log files from the device.
    You may receive a PM from me or another Palm employee asking for this information (we can be identified by orange logo's next to the name).
    Message Edited by HardBeatZ on 01-19-2010 02:36 PM

  • My Iphone 6 will not sync with the bluetooth in my car.  2010 Mercedes-Benz

    My iphone 6 will not sync with the bluetooth in my car. My car is a Mercedes 2010 GLK350. Anyone having this problem and if so is Apple working on it?

    Hey blud57,
    Thanks for the question. The following resource outlines information and troubleshooting steps if you are having issues with your car stereo connection:
    iOS: Troubleshooting car stereo connections - Apple Support
    http://support.apple.com/en-us/ts3581
    Additional information:
    If you can’t use a Bluetooth accessory or car kit - Apple Support
    http://support.apple.com/en-us/HT6473
    Thanks,
    Matt M.

  • Bluetooth Related Issues with Car kits regarding webOS post 1.4.0.

    We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
    If you are having issues around using Bluetooth with your Car Kit please post the information in this thread. 
    Please also use this template so it is easiest for us to extract this data
    Make/Model:
    Year:
    Carkit Model info (Manufacturer, firmware version, etc):
    Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
    webOS version:
    Included in compatibility list:
    To find out if your carkit is listed on Palm's compatibility chart see here
    http://kb.palm.com/wps/portal/kb/common/article/50373_en.html

    Make/Model: BMW 325I
    Year: 2006
    Carkit  Model info: Latest firmware for the 3-series.
    Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
    webOS: 1.4.0
    Included in compatibilty list: Yes
    It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

  • 3230 not recognising car kit (CK-10)

    I am having real problems with this 3230, I replaced my old Carkit 91, with a CK-10 as advised by Nokia support. Yet the phone does not act as if its in a hands free kit.
    When placed in the cradle, the keypad remains locked, it does not auto answer (as set in Enhancements Handsfree, in fact when going into the enhancements option its currently connected to "headset" despite a headset never being connected.
    Also the screen dims after a few seconds, However, the display shows the phone is charging through the cradle & I can receive & make calls through the remote mike & Speaker.
    Really weird - anyone have any simialr problems?
    BTW the firmware was flashed lastweek.

    kuorka wrote:
    Hi,
    a local Nokia distributor answered to my request that the Nokia stopped production of the CK-300 car kit. Is that true?
    Admittedly firmware updates appear to have ceased at v1.600, whereas existing stock seems to be at v1.400.
    It is still listed in the Nokia (UK) store:http://www.nokia.co.uk/find-products/accessories/all-accessories/car-solutions-accessories/car-kits-...
    Happy to have helped forum with a Support Ratio = 42.5

  • Car Kit CK-300 not available anymore?

    Hi,
    a local Nokia distributor answered to my request that the Nokia stopped production of the CK-300 car kit. Is that true?
    I am looking for a car kit for my Nokia E72 which would support control of OVI Maps navigation and SMS functions...
    BR, Kuorka

    kuorka wrote:
    Hi,
    a local Nokia distributor answered to my request that the Nokia stopped production of the CK-300 car kit. Is that true?
    Admittedly firmware updates appear to have ceased at v1.600, whereas existing stock seems to be at v1.400.
    It is still listed in the Nokia (UK) store:http://www.nokia.co.uk/find-products/accessories/all-accessories/car-solutions-accessories/car-kits-...
    Happy to have helped forum with a Support Ratio = 42.5

  • Wired Car kit for 6300

    Is there a hard wired option for the 6300 to a car kit?

    In a nutshell, no.
    The 6300 only has a Bluetooth option for car kit connection.
    You can get a charging cradle though so the battery is kept charged....

  • Nokia E5 bluetooth connection with car

    When I connect my E5 with Toyota over bluetooth I can't prevent autoanswer - my phone automaticaly answers after 2 seconds. I tried other phones (Sony Ericsson and Nokia E52) and with them there were no problems.
    I tried to disable autoanswer on my Nokia E5 but I couldn't.
    Any ideas?
    Solved!
    Go to Solution.

    Just wondered whether under Menu > Ctrl. panel > Settings > General > Enhancement > Wireless car kit = Default and presumably it is here you have set Automatic answer = Off ?
    Happy to have helped forum with a Support Ratio = 42.5

Maybe you are looking for

  • CMR - Can a primary key also be a foreign key?

    Hi, Has anyone come across the following problem? Although I mention Jdeveloper below I believe it is a general J2EE issue! I have two tables customer customer_id (PK) individual customer_id (PK) customer_id in individual is the primary key for that

  • Display bug: boxing, white screen, duplications. How can I fix?

    Having a problem with the screen stability. The bug seems to start when a few minutes or so into using a browser. I end up with duplciations of the screen and browser window sticking to my cursor, boxing and blinking of sections of my screen. This oc

  • Mavericks, change resolution of headless Mac Mini

    After updating to Mavericks I have have problems at changing the resolution of my headless Mac mini. After changing the display resolution my VNC/Screen Sharing sessions kept blacking out and I couldn't see anything. Any solution? Thanks, Andrea

  • How long does subVI stay in memory

    Hi,       I would like to know how long does a subvi stay in memory? If it is not used anymore will LabVIEW automatically close it? Thanks!       Tom Solved! Go to Solution.

  • CreatePDF desktop as printer?

    Where does my file go to when I use CreatePDF desktop as printer? I was not given the option to save it and cannot find it in my online profile.