Nokia - Get Connected Not Working, Installed 6.84....

Hi Guys,
Downloaded and ran install for version 6.84.10.3, now PC Suite won't connect to my phone. It sees my 5500 when I click on 'Get Connected', however, when I select the 5500 and click 'Finish', nothing happens.
I've tried re-booting, removing the usb cable, re-plugging in, but no luck.
Any ideas on this anyone?
Thanks,
Darren.

Hi ar_gee,
What is your BT stack and is your Vista 32/64 bit?
About Music Manager -> maybe reset for music manager settings helps so could you try this (I check those folders from XP so there maybe some difference in Vista):
1. close music manager (if it is open)
2. Open folder C:\Documents and Settings\"username"\Application Data\ and rename file NMM-MetaData.db to NMM-MetaData.db_old
3. Open folder: C:\USERS\My Music\ and rename folder "Nokia Music Manager" to "Nokia Music Manager_old"
4. Open Regedit (Start menu > Run > give command: Regedit) and open key HKEY_CURRENT_USER\Software\Nokia\ and rename key "Music Manager" to "Music Manager_old"
5. Start Music Manager -> does it work now?

Similar Messages

  • Nokia store does not working on c7

    hi, after i formated my nokia c7, nokia store does not working. Is anyone else having same problem??

    Install THIS and give it a go ... To download, you need to log-in using the SAME credentials that you use on this Forum ...

  • X-Fi Titanium PCI Express front pannel connection not working

    <font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
    <font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?

    Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
    Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
    Best of luck and .......
    Message Edited by jmacguire on 07-06-2009 :09 PM

  • Keep getting "itunes not working"  when trying to sync my music to my iphone4

    keep getting "itunes not working"  when trying to sync my music to my iphone4

    Just a basic gateway computer from futureshop(bestbuy) I get that message about half way through the sync then it closes iTunes?

  • Why can't I get into photoshop or elements 10? I just get a not working message

    why can't I get into photoshop or elements 10. I just get a not working message

    I have the same problem, I sent my submission when 4.9 came out. No way to get in the direcotry, I am also listed anywhere else.
    I have a jazz podcast which is member of Association of Music Podcasting. It's podsafe and I have a growing number of listeners. Please Apple do something.
    my feed:
    http://feeds.feedburner.com/NightPassagePodcast
    Renato
    The Night Passage Podcast
    http://nightpassage.blogspot.com
    http://nightpassage.org

  • Camera connection not working with my camera

    Camera connect not working with my Sony boggie camera

    The Bloggie will not work because it draws too much power from the USB port on the iPad.  The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory.  Works fine with my 3D Bloggie.

  • My nokia store is not working

    my nokia store is not working

     Assuming you have a Symbian device you can download the Store QML Client from HERE. Just log in with your Nokia account credentials, download the installer and transfer it to your phone. Then just tap on the file to initiate the installation wizard.
     This will replace the Store Client that is on your phone and also installs the correct QT dependancies.
    Ray.

  • Nokia n95 youtube not works

    i upgrade new software v30.0.015 rm159 so far works fine but youtube not works its open login but not streaming vedio if vedio works but no sound.
    and i go through google search and than youtube vedio its works fine
    but nokia 95 youtube not work plz reply thanks

    Here in New Zealand if you wanna watch youtube you have to be in a 3g area.

  • Bluetooth connection not working on US Nokia phones from J2ME Midlet (MIDP

    Hi All,
    We are developing a J2ME midlet (MIDP 2.0 ,CLDC 1.1)which makes bluetooth connection to other devices.The bluetooth
    connection is working perfectly on indian nokia phones with Airtel as carrier.But when we deploy the same midlet on Nokia E71
    US phone with carrier as AT&T ,the bluetooth connection is not working.The sample code is as follows:
    public void run(){
    try{
    StreamConnection connection = (StreamConnection)Connector.open(btConnectionURL);
    // open an input stream to get some data
    InputStream in = connection.openInputStream();
    byte[] serialData;
    readData = true;
    while(readData == true){
    int lengthavai=0;
    lengthavai = in.available();
    if(lengthavai > 0){
    serialData = new byte[lengthavai];
    int length = in.read(serialData);
    System.out.println("data read: " + new String(serialData));
    dataViewForm.append(new String(serialData));
    in.close();
    connection.close();
    }catch(IOException ioe){
    ioe.printStackTrace();
    when we try to connect on US Phones],the execution hangs at the following line of code:
    StreamConnection connection = (StreamConnection)Connector.open(btConnectionURL);
    No exception is caught.
    Our midlet is not signed.
    In the Forums it is said that the problem is with the unsigned midlet.AS some of the US carriers block the secure API usage
    on Unsigned midlet.
    But our question is, if we buy a code signing certificate from Verisign or Thawte and sign the midlet, will this problem be solved.
    Any other alternative solutions for this ???
    Immediate help will be appreciated.
    Thanks,
    Yash

    You might want to read this before buying a certificate:
    http://javablog.co.uk/2007/08/09/how-midlet-signing-is-killing-j2me/
    It's not my blog, but I pretty much agree with what it says. Unfortunately the network operators can control the access 3rd party trusted certificates have, so even if you sign with Verisign for example, the signed midlet may not have any more privileges than an unsigned midlet, depending on network. They do this so that only midlets signed with one of their own certificates have unrestricted privileges forcing anyone who wants a useful application to buy it from the network instead of downloading an equivalent freeware version from Getjar for example. Some networks are worse than others, so signing your midlet will allow it to work on more phones than an unsigned midlet. I think Verisign have some info on AT&T on their website.
    The whole MIDP specification for security is a joke, IMHO. I don't mind unsigned midlets flashing up a warning once during an application. Writing 20 files, for example, will give 40 security warnings for reading writing data which is ridiculous, as the user obviously either trusts the app or he doesn't. No one runs an app that they only sometimes trust.
    As far as I know the only mobile manufacturer so far to see sense is Sony Ericsson. All of their new phones from Java platform 7 onwards allow unsigned applications access to the file system, bluetooth etc with just one warning when the applications starts.
    Andy

  • Installing SSD Drive - SATA 3 connection not working

    Trying to install a new Samsung EVO 850 SSD Drive. The motherboard is MSI MS-7778 (Jasmine). I can get it to work on the white, dark blue, and light blue SATA connections. The yellow SATA connection (I think labeled SATA 3) does not work. It does not work when I connect it to anything in the computer. I need all four connections. Two hard drives and the DVD reader are already using the white, dark blue, and light blue SATA connections.Does anyone know how to get the yellow SATA connection (SATA 3) to work?Thanks! It's been a long night.... 

    Thanks for the suggestion. I too had noticed the motherboard diagram. I tried and tried all three SATA connections over and over again with no progress. I tried everything I could think of. Changed wires, checked the BIOS, etc.I was just ready to give up when my wife received a call from the Microsoft store notifying her that the install of Windows 10 on her laptop was done. She put the computer tech on the phone, I described the problem and he suggested that I try what I had been contemplating - reinstalling Windows 10 all over again. So I plugged in the SSD drive, both regular hard drives and said to myself, "After this many hours, I've got nothing to lose!" Reinstalled Windows 10 from my USB flash drive and everything worked like a charm. I couldn't believe it!It appears Windows 10 reads your entire hardware configuration on the initial install through the Internet. Which takes forever!Windows 10 doesn't like changes. So those of us who like to upgrade our computers with new SSD drives, memory, etc. are going to have to re-learn how to do it. It used to be so easy! Learning Windows 10 and how it reacts to new hardware configurations certainly sucked up many hours of my time!Thanks for the on-point advice.

  • Wireless connection not working after installed newest Lenovo ThinkVantage System Update programs

    Hi, everyone!
    I've installed some newest programs through Lenovo ThinkVantage System Update and just after that my wireless connection has stopped working. Here are the installed programs:
    ThinkPad UltraNav Driver for Windows 32-bit version 15.0.24.0;
    ThinkPad Power Management Driver version 1.60;
    ThinkPad Modem Adapter version 7.80.8.0;
    ThinkPad Hotkey Features Integration Package Setup version 3.11.0001;
    Inter Wireless WiFi Link for Window XP version 13.02.0000;
    ThinkVantage Access Connections for Windows XP version 5.62;
    ThinkPad Power Manager version 1.88;
    Lenovo ThinkVantage Toolbox (32-bit) version 6.0.5514.61.
    I've got a Lenovo T61 with Windows XP SP3.
    Also in Device Manager, there are now the two "Other devices" bellow with a yellow question point and a yellow exclamation point by side:
    Bluetooth Hands-free Audio;
    Bluetooth LAN Access Server Driver.
    Does anyone have any idea what can be done to have these issues solved?
    P.S.: when I click Fn+F5 it shows only the Bluetooth Radio.

    Hello and welcome,
    I've seen something like this on XP machines after updates a couple of times now - my T61, a friend's T400, and his daughter's T61.  I guess that makes 3
    _Maybe_  your situation is the same.
    The fix in all 3 cases was to go to device manager and uninstall the wifi driver.  Then scan for hardware changes and let it reinstall the driver.  Something about how Access Connections or some other networking mangement thingy was hooking the drivers I guess.
    On both of the friend's machines, the wired networking was also b0rked.  Same fix there.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Nokia C7 GPS not working after belle update!

    Hi everyone, i had a C7, working great till i updated it with symbian belle.
    okay here is what i did.
    -my GPS was working on symbian anna with maps version 3.06beta
    -i updated the phone to symbian belle from symbian anna.
    -installed nokia maps 3.06 beta, and replaced the one that came with the update because it had the option of route planning which the installed map did not.
    -this was the first time i checked to see if the GPS was working after the update, and it did not work even after i stood in an open field for half an hour.
    -i learned that the latest update of nokia maps in fact had route planning, so i used the nokia PC suite to reset the phone software, and then later updated everything that was listed in the software update app.
    -my GPS could still not work after i stood in the same damn field for another half an hour.
    -now it will just give approximate positions based on the wireless networks, and not give any accurate position, so i cant use it for navigation anymore.
    -i tried running the gpsinfoqt app, and it keeps saying searching for a signal, but it never finds one!
    Please help me!! if there is any way i could flash the C7 or run a diagnostic or something so atleast i figure what is wrong!

    Hi akkudub, 
    Welcome to Nokia discussions board!
    Have you used Nokia Suite for the update? 
    I advise you to follow the steps below in order to get your GPS fully working again:
    1) Uninstall the current version of Nokia Suite that you have. 
    2) Clean the registry with a registry cleaner. 
    3) On your PC, go to Start > Run and type %temp% and click on "Run". Delete all Nokia folders from the folder that opens. 
    4) Download the newest Beta version of Nokia Suite from this link: 
    http://betalabs.nokia.com/apps/nokia-suite-beta
    You will need to sign in to your Nokia account - the same credentials used to log into this forum. 
    We will appreciate your feedback once you have tried this program!
    Once Nokia Suite is installed, please connect your device to it and perform the available updates if any is available. Alternatively please reinstall the current software. Also, click on the Maps tab and download the relevant maps files (Europe, UK etc...)
    Let us know how you get on and feel free to post any other questions you may have. 
    Regards, 
    astra2025
    Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Iphone 6 plus wifi connection not working

    I don't know what the deal is but, I'm getting notifications of emails, and messages but when I go to the app I have nothing there. The problem has expanded and now apps aren't connecting to any wifi. I thought it might have been 3rd party apps, but now even the app store cannot connect. I've tried my home wifi, and my work wifi. Using my data plan, I have no problems connecting to anything. I'm thinking this is an IOS8 issue that needs a patch. If somebody has any other suggestions, I'm all ears!

    Nore wrote:
    I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
    Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
    I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1.  I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
    Are you a developer?  IF so try asking in the developer forum.

  • SQL Developer: View menu selections Reports and Connections not working

    Downloaded latest SQL Developer May 9 updated version and my dropdown selections from the View menu for Connections, and View Reports do not work. However, Snippets does appear when selected. Hate to lose some of the User Defined reports I had created. Any help would be appreciated.

    Don't know if I get what you're saying: the entries Connections and Reports from the View menu don't work?
    On top of the connection tree, if you get one, aren't there the two tabs with these options?
    If you're unable to view the whole tree, you're installation would be corrupted. Install from scratch in a separate folder, first without migration to see if that resolves the issue. Then you could do the same with migration to retrieve all previous settings and connections.
    K.

  • Nokia 5800XM Homescreen not Working!!!

    I have recently updated my Nokia 5800 XM as follows:
    Software version:
    V31.0.101
    Software version date:
    16-09-2009
    Custom version:
    31.0.101.001.01
    Custom version date:
    16-09-2009
    Language set:
    11
    Model:
    5800 XpressMusic
    Type:
    RM-356
    Latest update:
    11/11/2009
    After the update the phone was working fine for almost a week, the problem appeared when the battery went out and the phone subsequently  turned off, when I plugged it to charge,I have got only the Nokia Logo white screen and the phone did not boot to the homescreen! After several trials of removing the battery which did not work, I tried removing the Memory Card which worked out but my problem now is that the Home screen shortcuts are not working as follows:
    Dialler: Not working
    Contacts: Not working
    Calendar: Not working
    Shortcuts: Not working, not appearing
    Green button: Not working (does not get the dialler)
    The tooltip that shows when I keep pressing on each of the above items does not read what it is (it seems it is missing the name and shortcut of the program running it). Only the Time and date, alerts links are working.
    Also another note is that the dialler and contacts are working only whenI go to the Menu by clicking the green button or selecting the contacts.
    Conclusion: it seems to me that the problem is only in the Home screen, also another note is that after the software update I am noticing that the battery is going out faster than before with the normal use of the phone, nothing intensive e.g. WiFi or bluetooth or GPS.
    What I have done trying to resolve this issue unsuccessfully:
    1- Restore Factory settings.
    2- Format the Memory Card
    I hope there is a solution for this! Also I would appreciate to know if there is a software that allows to re-install older versions of firmwares.

    do a hard reset for the phone the memory card
    (((dont forget to backup all your things on the computer)))
    i had the same problem and fixed it by a hard reset for the phone
    and then a soft reset
    and a hard reset for the memory card((using my computer))
    and then a soft reset in the phone
    this solved the problem for me
    3310,7210,3650,6600,6630,N70,N73,3250,N95,5800,5530

Maybe you are looking for

  • Have iPhone 5 set to back up to iCloud but need both iTunes and iCloud done...

    after going from 4s to iphone 5 and dragging and dropping like 15 playlists and about 4300 plus songs there must be a better way. I backup complete itunes folder, exporting all playlists as xml files i am learning as i went from 3 to 3GS to 4 to 4s a

  • AppleScript Needed for reply-to heading replys

    I need help editing this script to reply to multiple emails I get from PayPal that will reply to the email's Reply-To Heading, not the From Heading, which of course is PayPal. This script works for everything but replying to the return path (Reply-To

  • Windows showing ipod touch 4gs name incorect

    SERIOUSLY I need help My Hp paillivon dv5 after getting fixed and after a long time was showing my ipod touch 4g ios 5.0 and 5.0.1 as my cousins ipod why is this happening it is HP Pavilion dv5-1392nr Entertainment Notebook PC i need help!

  • Change location and plant for Internal Goods/services

    Hi all, I want to change the plant and location information of product/material for SC item selected from Internal goods/services. I am changing the plant and location -  ( partner function 75 ) in  doc change badi but its getting reset to originial

  • Custom authorization object

    Hi all, I have created a custom authorization object to define a data security based on the Company code field. These are the steps I did: - I create a new authorization object containing the Company code field (BUKRS). - I create a new role with thi