Nokia H.264/AVC Profile support

I'm looking for more information on Nokia Profile support - specifically which devices have which profile - Baseline, Main, Extended, etc..
Also, if different from the others, which profiles do the N82 and N810 support.
Thank you.

Isn't that the holy grail for us video lovers!
Anyways, I've collected some information here:
http://portablevideo.blogspot.com/2008/03/how-to-become-better-video-editor_11.html
And here:
http://portablevideo.blogspot.com/2008/03/will-this-video-play-on-my-nxx.html
Truth is this information is not forthcoming from Nokia.
So far I've only confirmed bits and pieces. H264 is only Baseline Profile that is supported. Main and Extended are not supported in any device. Sorenson or Spark is also not supported.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

Nokia 5230 and H.264/AVC playback issues

Hi guys
Can someone please tell me which H.264/AVC profiles do Nokia 5230/5530/5800/N97/X6 play?
Thank you!

ok;
I've found this:
"The problem is that the Real Player itself is not able to handle MPEG4 part 10 profile (also called H264 or AVC).
I wish the Real Player could do this, because you can get a high quality videos with small file size using low bitrates.
It plays only MPEG4 part 2 profile (also called ASP, similar to H263).
My conclusions are:
1. The device itself will be able to play H264/AVC given the proper software (The Core Player upcoming version?).
2. The website is too enthusiastic and made a mistake in stating that 5800 can play H264/AVC out of the box. :-["
Here http://forum.dailymobile.se/index.php?action=printpage;topic=7687.0
So i suppose same is the case with 5230.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

H.264/AVC Encode

Hiya,
we all know our video guru el_loco whom I have known a long time and who helped me two consecutive years to get MY PHONE. This process is based on him.
Our N95 8GBs are HW accelerated for 640X480 REZ'd MPEG4/MP4s and 320X240 REZ'd H.264/AVCs.
I personally prefer H.264/AVC over MP4 just because it is bit clearer and well saturation level.
So, I have been trying to find out which converter does its best to convert **bleep** to good H.264s.
So, I use Videora iPod Converter.
It uses internet occasionally.
When you open it;to avoid so many confusions directly create a new profile.
Name it anything you like.
And the settings are:
It goes in this way:
Settings>New Profile
General: Profile Name
iPod 1-pass-ffPPEGVNB
Video>General>H.264, Baseline Profile, Level 1.3
(Lets keep General2, and general3 untouched)
Bitrate:
ABR
512(it is enough for me, but there is another option-576, if you want more experiment try it, but leave 768 or higher)
Max resolution:320x240
Audio: as you wish, but 64 AAC-LC is enough for me.
Thanks.
Any correction, el_loco welcome.

Hi,
Just some clarification so I don't continue wasting hours encoding video!
I've been trying for ages to get H.264 working on my phone at 640x480 resolution. So if I'm understanding this post correctly, the N95 can't go above 320x240 for H.264??
Don't get me wrong: MPEG-4 looks awesome on the N95 handset, but H.264 would be much, much better for tv-out...
And can it still support H.264 using widescreen resolutions below 320x240?
Thanks,
Jessica

Select AVC profile on WLC based via ACS

Hi there
I just saw the AVC feature in WLC version 7.4.100.0 and wonder, if there is a possibility to select a AVC profile per user, based on it's RADIUS authentication via ACS.
For example:
- A user in group teacher can access youtube on SSID A
- A user in group student can not access youtube on SSID A
Thanks a lot in advance and best regards
Dominic

Well I don't know if this will come in the future for ACS or ISE, but in order for this to work also in other radius servers, it would have to be a new radius standard attribute others have to implement and also the WLC would have to be able to see that attribute. So if its anytime soon, well.... Maybe not:)
Sent from Cisco Technical Support iPhone App

QuickTime and H.264 High Profile?

Hi,
Just a quick question...
Does QuickTime support H.264 High Profile?
If not, does anyone know if Apple are working on it?
Thanks,
Lee.

.mov works...
try this file... Dolby Digital 5.1 in a .mov container. VisualHub will supposedly be adding this ability to there outputs...
http://uploaded.to/?id=yqshmu

Does Nokia Pc Suite 6.8 support N07 mini

Does Nokia Pc Suite 6.8 support N07 mini

The new version has updated the Music Manager but has changed some important features like being able to see how big the selected music files are. This is definately needed.
Better support for automatically converting MP3's to AAC which is a space saver for memory.
One problem I am having is that once you initially connect the phone it installs both pc suite support and sms support to the handset, however, this only happens on the initial connection. Any idea of they will make these support sis files separate if one wants to use more than one handset with PC Suite?
Phones: N95 8GB NAM, N82, N81 8gb, N95-3, Pink N95-1, Pink N73, N75, N90
Nokia N810 and N800 Internet Tablets

Bluetooth 2.0 with A2DP profile support

I have a set of parrot Hi-Fi speakers with built in bluetooth connectivity. They require Bluetooth 2.0 with A2DP profile support to pair. Does anyone if the new Macbooks with Leopard OS supports this ??

Hi Sumpey,
IF that device works fine with your Tiger, big chance that device will work fine too with Leopard, especially if there is no drivers involved.
But I cannot be that sure since Leopard is not released yet.
But do check frequently to the device web site and apple sites.
Good Luck.

H.264/AVC software encoding for cameras

Hi All,
             Please let me know, how can we activate H.264/AVC video encoding (new feature in Flash player 11 [H.264/AVC software encoding for cameras]) using actionscript 3 in AIR application, I think, it could not be by default as there are no updates available for flash builder 4.5. So, how can we pick the encoding option. Any new API or methodology for this?
Any one any idea??

H.264/AVC software encoding is not turn on by default. You need to assign the NetStream.videoStreamSettings property an H264VideoStreamSettings object. Here's a very simple example;
package
          import flash.display.Sprite;
          import flash.events.NetStatusEvent;
          import flash.media.Camera;
          import flash.media.H264VideoStreamSettings;
          import flash.net.NetConnection;
          import flash.net.NetStream;
          public class TestAVC extends Sprite
                    private var _nc:NetConnection;
                    private var _ns:NetStream;
                    private var _camera:Camera;
                    private var _h264Settings:H264VideoStreamSettings;
                    public function TestAVC()
                              _h264Settings = new H264VideoStreamSettings();
                              _nc = new NetConnection();
                              _nc.client = this;
                              _nc.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
                              _nc.connect("some fms server");
                              _camera = Camera.getCamera();
                    private function onNetStatus(e:NetStatusEvent):void
                              switch (e.info.code) {
case "NetConnection.Connect.Success":
                                                  _ns = new NetStream(_nc);
                                                  _ns.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
                                                  _ns.client = this;
                                                  _ns.attachCamera(_camera);
                                                  _ns.videoStreamSettings = _h264Settings;
                                                  _ns.publish("testAVC");
                                                  break;
                    public function onBWDone():void {}
                    public function onMetaData(o:Object):void {}

Multiple AVC Profile for each SSID

Hello,
I know there is limitation on the number of ACLs in each AVC profile, but is there a way to build multiple profiles and link it to the same SSID?
thanks,

Hi Sandeep,
thanks for your reply, I think Cisco should consider allowing provisioning multiple profile for each SSID as the number of applications that needs block are exceeding each profile..
I do have Guest SSID and I want to block everything using AVC, due to it's limitation, this cannot be achieved.
Thanks,

Encore CS5, BluRay H.264 and Profiles

I find in the manual that Encore is only allowing Main profile H.264 files to be used untranscoded. Yet, everywhere I have read and learned about H.264, the ideal way to get the best compression is to use the high profile and a level of 4.1. In fact, this is the most common preset in most encoders for BluRay preset H.264 encoding.
So, what gives?   Is Adobe really going to force me to transcode my H.264 high profile footage?   This is odd since one of the transcode templates in AME as instanced from Encode (1920x1080i hihg quality) is preset to high profile, level = 4.1
I guess it is OK for AME to transcode it when triggered from Encore... but not anywhere else. For example, use this same AME preset from PPro, import the resulting H.264 file into Encore, it wants to transcode it...   very frustrating.
I have an encoder that I feel is superior to the one in AME and it has the same template settings as the BluRay presets in AME. Encore won't take them...
Am I missing something here?

4tKingAV wrote:
I agree with your comments. Any experience with BDR media and 25m rates on players?
As much of my material is mid-band, or darker...   I am worried about banding that I see in X.264. Also a lot of footage I shoot is interlaced due to the high motion of the event. So, I am in a bad place. I have a lot of mid-band footage that has a lot of motion in it. I could go to 30p, but I don't alway like how it looks when some of the events are fast moving.
I am open to investing in a solid H.264 encoder if it gives me what I want...
Every burn I've done to TDK BD-R50B or Sony BD-RE50 has played fine in my PS3, with rates as high as 40mbit/s (burst for a minute or so, not the entire project). So I can't comment on lower-quality media, because it's all worked for me thus far.
Like I said, I've done interlaced with x264 just fine, but the x264 developers claimed (as of three months ago, anyway) that interlaced encoding was "broken" so you author with such output at your own risk. 1080i @ 29.97 works for me on powerdvd9 and a real PS3, all 60 fields present, using the following batch file:
x264 --crf %3 --preset veryslow --weightp 1 --bframes 3 --nal-hrd vbr --vbv-maxrate 40000 --vbv-bufsize 30000 --level 4.1 --keyint 30 --b-pyramid strict --slices 4 --tff --aud --colorprim "bt709" --transfer "bt709" --colormatrix "bt709" --sar 1:1 %1 -o %2
Called like this: batchfile.bat infile.avi outfile.m4v NUM
...where NUM is the crf number I want to use (I use 16 unless the files get too large). If you're trying to keep maximum bitrate down then this is not what you want to use, use the one with bitrate contols on the website URL in my last post. My input footage was upper-field-first, hence the "--tff" in the above example.
One note on large files and dual-layer media: Don't create a file larger than about 24G. Otherwise Encore and other programs will blow a gasket (in my experience) when it comes time to try to place the layer break, which it can't do because the file goes over the layer size.
There are good commercial programs that can produce H.264 content, but they range from $700 to $8000. I've used some of them, and they do have significant advantages if you want to re-encode certain sections with different bitrate targets, but generally most of my work can be serviced just fine using AME or x264.

Lens profile support

Where can I find Lens profiles for Lightroom?
Thanks

Alan,
The lens Profiles are included as part of standard lightroom & photoshop installation.
If you have a raw file in Lightroom & turn on lens correction it will try to find the lens data from EXIF data and would do the lens correction.
The lenses which are included can be checked by the link below :
http://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html
Mandhir

New H.264/AVC encoding for cameras

Hi All,
Please let me know, how can we activate H.264/AVC video encoding (new feature in Flash player 11 [H.264/AVC software encoding for cameras]) using actionscript 3 in AIR application, I think, it could not be by default as there are no updates available for flash builder 4.5. So, how can we pick the encoding option. Any new API or methodology for this?
In short, how to publish live stream to FMS using H.264 encoding with actionscript 3. [not with FMLE]
Any one any idea??

Hi All,
Please let me know, how can we activate H.264/AVC video encoding (new feature in Flash player 11 [H.264/AVC software encoding for cameras]) using actionscript 3 in AIR application, I think, it could not be by default as there are no updates available for flash builder 4.5. So, how can we pick the encoding option. Any new API or methodology for this?
In short, how to publish live stream to FMS using H.264 encoding with actionscript 3. [not with FMLE]
Any one any idea??

Reader X Folder redirection / Roaming Profiles supported ? by

Are Folder redirection / Roaming Profiles supported in Reader X ?
(that's in systems that use Active Directory in Windows)
Its only been a bug for about 10 years ;-)
cheers pb...

If any Adobe Employee is still reading this, here is the very specific information you need to fix this.
Server 2008 R2 Domain, User profile config:
User's share:
Map to N:
\\LHMAIL\ACCT-TEST3\Teacher1
Profile path:
\\LHMAIL\ACCT-TEST3\Teacher1\0-Profile Folders\Profile
Group Policy Object for user's Organizational Unit
Folder redirection for Application Data:
\\LHMAIL\ACCT-TEST3\Teacher1\0-Profile Folders\AppData
For share: \\LHMAIL\ACCT-TEST3
Share permissions:
Authenticated Users - full control
NTFS permissions:
Domain Admins, Enterprise Admins, Administrators (local), SYSTEM - Full control
CREATOR OWNER - Full control - subfolders and files only
Authenticated Users - List folder / Read Data - this folder only
==================
Basically, Adobe Reader X tests every folder in the AppData path, from right to left down to the root, and it chokes trying to create a file on the root part of a UNC path, which is the server name:
CreateFile \\lhmail\ OBJECT PATH INVALID
This is an invalid action that no program can do, regardless of whatever permissions the program has.
Open Adobe Reader X, using SysInternals / Process Monitor to watch for activity:
Tests: \\lhmail\acct-test3\teacher1\0-Profile Folders\AppData
7:34:05.0729667 AM AcroRd32.exe 3916 CreateFile \\lhmail\acct-test3\teacher1\0-Profile Folders\AppData SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
7:34:05.0775536 AM AcroRd32.exe 3916 QueryBasicInformationFile \\lhmail\acct-test3\teacher1\0-Profile Folders\AppData SUCCESS CreationTime: 3/20/2011 4:16:01 AM, LastAccessTime: 3/20/2011 7:07:11 AM, LastWriteTime: 3/20/2011 7:07:11 AM, ChangeTime: 3/20/2011 7:07:11 AM, FileAttributes: DNCI
7:34:05.0778734 AM AcroRd32.exe 3916 CloseFile \\lhmail\acct-test3\teacher1\0-Profile Folders\AppData SUCCESS
Tests: \\lhmail\acct-test3\teacher1\0-Profile Folders\AppData
7:34:05.1002372 AM AcroRd32.exe 3916 CreateFile \\lhmail\acct-test3\teacher1\0-Profile Folders\AppData SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
7:34:05.1045836 AM AcroRd32.exe 3916 QueryBasicInformationFile \\lhmail\acct-test3\teacher1\0-Profile Folders\AppData SUCCESS CreationTime: 3/20/2011 4:16:01 AM, LastAccessTime: 3/20/2011 7:07:11 AM, LastWriteTime: 3/20/2011 7:07:11 AM, ChangeTime: 3/20/2011 7:07:11 AM, FileAttributes: DNCI
7:34:05.1048840 AM AcroRd32.exe 3916 CloseFile \\lhmail\acct-test3\teacher1\0-Profile Folders\AppData SUCCESS
Tests: \\lhmail\acct-test3\teacher1\0-Profile Folders
7:34:05.1186705 AM AcroRd32.exe 3916 CreateFile \\lhmail\acct-test3\teacher1\0-Profile Folders SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
7:34:05.1201481 AM AcroRd32.exe 3916 QueryBasicInformationFile \\lhmail\acct-test3\teacher1\0-Profile Folders SUCCESS CreationTime: 3/20/2011 4:16:01 AM, LastAccessTime: 3/20/2011 4:17:40 AM, LastWriteTime: 3/20/2011 4:17:40 AM, ChangeTime: 3/20/2011 4:17:40 AM, FileAttributes: D
7:34:05.1204470 AM AcroRd32.exe 3916 CloseFile \\lhmail\acct-test3\teacher1\0-Profile Folders SUCCESS
Tests: \\lhmail\acct-test3\teacher1
7:34:05.1273541 AM AcroRd32.exe 3916 CreateFile \\lhmail\acct-test3\teacher1 SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
7:34:05.1285301 AM AcroRd32.exe 3916 QueryBasicInformationFile \\lhmail\acct-test3\teacher1 SUCCESS CreationTime: 3/20/2011 4:15:47 AM, LastAccessTime: 3/20/2011 4:16:01 AM, LastWriteTime: 3/20/2011 4:16:01 AM, ChangeTime: 3/20/2011 4:16:01 AM, FileAttributes: D
7:34:05.1289268 AM AcroRd32.exe 3916 CloseFile \\lhmail\acct-test3\teacher1 SUCCESS
Tests: \\lhmail\acct-test3\
7:34:05.1348512 AM AcroRd32.exe 3916 CreateFile \\lhmail\acct-test3\ SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
7:34:05.1368520 AM AcroRd32.exe 3916 QueryBasicInformationFile \\lhmail\acct-test3\ SUCCESS CreationTime: 3/20/2011 2:52:19 AM, LastAccessTime: 3/20/2011 5:42:42 AM, LastWriteTime: 3/20/2011 5:42:42 AM, ChangeTime: 3/20/2011 5:42:42 AM, FileAttributes: D
7:34:05.1371515 AM AcroRd32.exe 3916 CloseFile \\lhmail\acct-test3\ SUCCESS
Tests: \\lhmail\
7:34:05.1381626 AM AcroRd32.exe 3916 CreateFile \\lhmail\ OBJECT PATH INVALID Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
As a result, Adobe Reader X opens with a warning box, cannot open in Protected Mode due to "a problem with your system configuration".
This particular error will not occur if:
AppData points to the local system drive (No AppData redirection), whether roaming or not
C:\Users\Teacher1\AppData
AppData is redirected to point at a mapped drive for the network path:
X:\Teacher1\0-Profile Folders\AppData
This second option is the usual workaround to Adobe's problem, but not recommended by Microsoft. Apparently it has negative effects for other Windows services and programs to use drive mappings rather than UNC paths.

How to play MPEG 4 (h.264 / AVC) videos that were encoded for the PSP

Hello,
I am trying to play a video in MPEG 4 (h.264 / AVC) format (file extension .mp4) that was encoded to play on the Sony PlayStationPortable (480x272) via QuickTime. The video plays perfectly via VideoLAN, mplayer or the PSP, but QuickTime only opens a black screen without any error message.
I am using the most current version of QuickTime on WindowsXP or Windows Vista. I have the same problem on either system.
Can anybody tell me how to resolve that problem? I do not want to reencode the videos, though.

QuickTimeKirk,
My goal is to create a looping animation for playback on an iPod. Should be easy right? Not with the QT!
I did the following:
1) Render a bunch of frames destined for looping.
2) Convert them to an uncompresses ".avi" file.
3) Open the ".avi" file in QT Pro.
4) Click "Loop"
5) Play movie. It loops nicely.
6) Click "Export" and select "Movie to QuickTime Movie"
7) Click "Save"
When I play the saved ".mov" file (You said QT retains the metadate requiring looping) IT DOES NOT LOOP!
To recap: This is a Quicktime movie. I selected looping when I created the bloody thing.
It
does
not
loop.
This *****.
This is REALLY, REALLY, ANNOYING! *** is going on with this QT Pro crap? I simply want to loop the movie. Is that really asking too much? I don't think so.
Can someone, anyone, please, please, tell me how to force the movie to loop on launch. Forcing an iPod user to muck about and select looping (can they even do that?) is not an option. Period.
Please help me,
Doug

Email profile support for Samsung Android (KNOX) devices in integrated environment of SCCM 2012 R2 and Microsoft Intune

Hi,
I could see that lot of TechNet articles are being updated recently with the information on Samsung Knox.
Tried to check the email profile configurations in the SCCM console, could not find Android platform in the supported platforms.
I could see this option available when I login to the admin portal of Intune. Can any one confirm if the extension for enabling email profile support for Samsung Kiosk devices id released or planned to be released.
Regards
Leela

Configuring email profiles on Andriod devices is not yet supported via ConfigMgr integrated with Intune, see also:
https://technet.microsoft.com/en-us/library/dn554226.aspx
It probably will be in the future, but there are no dates available yet.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Nokia H.264/AVC Profile support

Similar Messages

Maybe you are looking for