Nokia Lumia 1320 does not recognize media files properly

Hello
I have the following problem with my Nokia Lumia 1320:
media files (either music or video) are not recognized properly and therefore seen in "other" section of Storage.
There has been a discussion here a while ago here:
https://social.msdn.microsoft.com/Forums/en-US/042cc9fb-ea9e-444c-98f0-8c1d0930e326/sd-card-problem-with-my-nokia-lumia-1320-unable-to-use-it-properly?forum=winphoneosissues
But my problem is in fact that media files are not recognized even on the phone itself which is very surprising.
I have tried several ways to copy the files over:
- Win Explorer on Win XP
- Win Explorer on Win 8
- special app on Win 8
with the same result.
Moreover, sometimes the files are not read by the official Music app with the following odd errors:
- 80070002
- 80070003
Even more problems occur with the SD Card:
some files fail to be transferred there and disappear after the phone restart. I have tried the ways above to copy these files with no luck.
I have also tried both hard and soft phone reset, formatted SD Card via phone and PCs.
The problems described still persist.
Does anyone have ideas/ways to fix those problems?
The phone is really nice but it's pretty annoying to meet these problems.
Interestingly, my previous WPs (HTC 7 Trophy and HTC 8X) didn't have a half of the problems described above. Bad luck...
Details of my phone are:
- Nokia Lumia 1320
- OS: 8.10.12393.890
- Region Set: United Kingdom

We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here: http://answers.microsoft.com/en-us/winphone/forum/wpdp
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

Similar Messages

I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files.

I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files. I am stumped.

If you have the original movie files, you'd be much better converting those, otherwise try MPEGstreamclip.

Thunar does not recognize image file formats

Hi Archers,
My problem is that I use XFCE4 with Thunar file manager and Thunar does not recognize image file formats. I mean for example JPG format is an executable application fromat according to my Thunar, but I'd like Thunar to recognize JPG format as image or bitmap format appearing with small preview of the image.
Any help is appritiated!
gellb

Yes, I did.
Activating Show Thumbnails button in Preferences of Thunar does not work.

I transferred CS5 to a new computer using PC transfer program. CS5 started up on the new computer OK, but now does not recognize raw files. Should I uninstall and reinstall again?

I transferred CS5 to a new computer using PC mover ultimate. CS5 appeared to start up normally, I had to insert the serial number from my original CD. However, now the program does not recognize CR files and Adobe bridge is not working properly. I get messages that CS5 needs to be updated, but the updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer using the original CD, and then reinstall CS5 using the CD on the new computer?

Transferring programs does not work well with Adobe applications. You should install them.
As far as having the program on different machines goes, you are allowed to have two activated installations so if it is working on the original machine there is no reason to remove it unless you need the space.

Organizer (PSE 8) does not recognize DNG files

I recently upgraded to Elements 8 for Windows. Although I can load DNG files in to Editor, work with them and save them, the Organizer says it does not recognize this file type and will not load DNG files. In Windows Explorer, I had to associate my DNG files (I use XP) as being an Adobe Elements file so the install program clearly dropped the ball. Did not have this problem with Elements 7. Organizer recognizes my Camera RAW files just fine.

I am able to get DNG files in PSE Organizer 8.0 and didnot see any issue.
Could you restart your system and see if it works!
~V

I have PS CS5. It does not recognize .CR2 files from my new Canon PowerShot SX50HS camera. Can I update my CR plugin? To what version? Where can I get it?

I have PS CS5. It does not recognize .CR2 files from my new Canon PowerShot SX50HS camera. Can I update my CR plugin? To what version? Where can I get it?

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file. What

I have Photoshop CS3 which I have used successfully for a number of years. I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file". What do I need to do to open my NEF files?? Thanks.

Thanks for the quick reply, CP
FYI, the file is a photographic panorama based on several .CR2 photos taken in July, 2012 and processed in CS5's camera RAW/Photoshop. Beyond the metadata, here are no fonts or text in the file.
1. I changed Maximize ...File Capability from "Never" to "Always" and the flattened file saved and loaded OK, though I can't figure why given Adobe's description of this option. "If you work with PSD and PSB files in older versions of Photoshop or applications that don’t support layers, you can add a flattened version of the image to the saved file...". The file saved in this manner is ~8% larger and is not my preference as a routine since I've TB's of photo files. By the way, out of thousands of .psd/.psb files, the one being discussed is the first to give me the error.
2. I've tried saving/reloading the file on another computer with Win XP Sp3/CS5...again with Maximize Capability OFF. Same problem. Turn ON Maximize Capability and it works. As with the Win 8 machine, Bridge could neither create a thumbnail or read Metadata.
3. I've purged the Bridge Cache, made sure there were no old PS page files, reset PS preferences, and disabled my 2 plugins with no change in the problem. Windows and Adobe progs are all updated. Saving to a different HDD has no effect.
The problem occurs on 2 computers (Win XP/Win 8), two versioins of Photoshop (CS5/CS6), and "Maximize" On/Off togles the problem. My guess it is a bug in PSD processing routines.
If I can't find a fix, will keep with Maximize ON and deal with the larger files that result...the cost of insurance, I suppose.
Thanks again

Lumia 920 does not recognize transferred media fil...

I am able to transfer media files (mp3) to the phone with my Ubuntu 12.04 with no problem at all. However, the phone does not recognize files when I go to Nokia Music application. Software says that all the Music "folders" (Albums, Genres etc.) are empty. Am I missing something here? Seems like no one else has this problem.
I have tried putting the mp3 files in all possible folders ( music, documents etc) on phone, but no luck. I have also tried several different mp3 files. Can anyone help me with this?

This was never a problem for me with my fisrt 920. I have just taken delivery of a replacement phone after I managed to smash the glass on thge first one last week. I have tried transferring albums and songs (in mpeg-4 format from my pc's file explorer, using the USB connector. File Explorer indicates that the files have copied correctly into the Lumia's Music folder but when I try to run Nokia Music it tells me that nothing has been transferred. So I check back on the pc with USB connector and, sure enough, File Explorer tells me that the folders and files ARE there.
What's happening on the Lumia 920? (By the way the X-Box Music App also tells me that nothing exists on my Lumia music folder).
Absolutely no problem transferring photos by this route.

Offline File | Zero KB CRW's | "Photoshop does not recognize this file"

The first symptom was when I got the dialogue "The file named "CRW_0004.CRW" is offline or missing. I located the file using spotlight only to get a "Could not complete your request because Photoshop does not recognize this type of file." when trying to open it in photoshop. Upon closer inspection I found that the CRW file was 0KB. I searched for 0 KB CRW & CR2 files to find thousands of files. Heart sinks.
I recently started using lightroom to import and organize all my files. Now it seems something has gone gravely wrong. Any ideas?
Intel iMac 2core
OSX 10.5.7
LR 2.4
Camera Raw 5.4

…and just before I ran the utility I did an export and got a warning that 18 files were offline or missing and 1.file doesn't exist. But once I tried to Right Click>> show in finder and went through the relocate dialogue LR immediatly found the file. Reattempt to export files from "Photos that failed to export" folder went flalessly.

Nokia software updater does not recognize Windows ...

I tried to install nokia software updater to my pc,WIN7 ultimate,and installation cannot begin,because its does not recognize OS.

Taugis,
If the method as described by Rider5512 does not prove to be the solution you require, Microsoft does have an official Windows 7 Support Forum located here http://tinyurl.com/9fhdl5 . It is supported by product specialists as well as engineers and support teams. You may want to also check the threads available there for additional assistance and feedback.
Also to get your questions answered on the most common challenges around application compatibility when coming from a legacy operating system, why changes were made along the way, compatibility technologies inside the OS and methods for getting incompatible applications to run on Windows 7, please go here: http://tinyurl.com/yfa2yyz
Jessica
Microsoft Windows Client Team

HT3258 what about final cut does not recognize mts file

what about final cut does not recognize mts file

If you have an AVCHD camcorder, you need to select one of the AVCHD Apple Intermediate Codec Easy Setups in FCE that matches how you shot the video in your camcorder. (eg, AVCHD Apple Intermediate Codec 1920x1080i60 would be appropriate for camcorders produced for North America unless you selected some other video type in the camera's setup.) After selecting the appropriate Easy Setup, create a new sequence then import the video from your camcorder.
If you only have the .mts files themselves (perhaps because you copied them to your hard drive without their entire surrounding AVCHD folder structure), that's another matter. In that case you need Clipwrap or similar app to transcode the .mts files to QuickTime/Apple Intermediate Codec before importing them into FCE. You still need to have the correct easy setup in FCE.
It would help to know exactly what make/model camcorder you have, and what model Mac and versions of OS X and QuickTime.

LR5.7.1 does not recognize all files on SD or CF cards?

I have been using LR 5.7.1 through creative cloud. Using LR since verison 1 ) Using a card reader to import, LR now does not recognize all of the files on either SD or CF cards. To get LR to see all of the files, I must close LR and sturn off comptuer and back on again. --then LR might see all of the files on the cards. The lats time, LR saw the files, I clocked "import" and LR make the smart previews BUT when started to make the regular previews I watched the previews turn black right before my eyes. Now I Have no files--they are all black. I quit LR and looked at the files in Finder--all of the files are black there too. What has hapened and what can I do to get my files back. I put the card back into the camera--and the files are not tiny and it says "unidentified files" on teh camera LCD screen.
. What can I do? I'

Card reader—never thought of that. I tried a new card reader and test shots on other cards with both cameras. All seems to be working fine now. I even put in the old corrupted card and the same corrupted images are still black but the good ones are still good. Thanks again for your help. I have a big job coming up and I was quite worried.

Mac Air does not recognize ISO file, Mac Pro does

Hi All,
My MacBook Air, i5, with OSX 10.9.4 and Bootcamp 5.1.2(484) does not recognize the Windows 7 ISO image, while my dad's Mac Book Pro, 10.1, i7 with OSX 10.9.4 and Bootcamp 5.1.2(484)...does recognize the Windows 7 ISO image...
We tried two different Windows 7 ISO images
When we start from a fresh boot , the 1st error is "Not a Windows 7 image", and when we retry we get "Not a 64 bit Windows 7 version.
What are we doing wrong?

You can return a new Mac within 14 days of purchase.
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

Switching to a MAC which does not read media files on Storm

I recently obtained a MacBook Pro and want to use my Blackberry Storm for music and pictures as I have done with my PC.
Unfortunately the Mac does not read my media card. It does recognize the Storm but will not show any music files or photos.
What to do?

Did you select tracks that iTunes does not play?
also says it is for iTunes 4.1 rather than v10
Actually it states, " iTunes 4.1 or better".
iTunes 10 is better (more recent) than iTunes 4.1 and it works fine.

Updated Adobe Reader to 11.x, now it does not recognize pdf files

Ok. I don't know how to explain this so I'll do my best. Please let me know if you need more information.
I updated my Adobe Reader to X and noticed that all of the sudden any files that were sent to me via e-mail would not open up. I use Outlook Express to access my gmail account because we have multiple accounts that we use and I haven't figured out how to do that with Outlook! Anyway, this is always the response I would get. It would ask me if I want to open this file. It would give the name.pdf and the type is AcroExch.Document. If I click open, I get the following warning: This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel.
Now if I go to save the file and I just saved it to my desktop, I can open it that way. I don't really want to always have to save files to my desktop or whatever just to open then and see what they are about. I do know that earlier I was having the same issue on my desktop- that it wouldn't recognize the pdf file, but I figured out how to make that association. So I'm wondering how to do this on e-mail.
I have the latest version of Adobe Reader, which I guess now is 11. What else should I do?
Thanks in advance!
Jennifer

Ok sorry I've taken so long to respond. The reply button wouldn't pop up for me to reply!
There was never a dialog box asking for me to select the program from installed programs when I open the pdf from outlook express. But when I opened a pdf from my desktop it asked that question and I had it "always use this program to open this type of file." So I assumed that it was would work when opening from outlook express. But it doesn't.
I've tried unclicking the protected mode button under the preferences general section. And finally I'm not sure how to post screenshots of the attachment thumbnail and dialog. I'm looking all over my keyboard for a button to push I don't have a clue as to what to do! I do have a print Scr button but when I click on it nothing happens. I've tried holding down the shift key and the button and the alt key and print scr button but nothing happens.
Could it be that somehow it's not recognizing ARCO.EXCH.DOCUMENT as that's what it thinks the type of document is?
I've already created an association for pdf files and it'll open them on my desktop, just not in outlook express.

Nokia Lumia 1320 does not recognize media files properly

Similar Messages

Maybe you are looking for