Nokia Lumia 1520 out-of-the-box problem

I just got the Nokia Lumia 1520 from Germany and I took it out of the box all good and pretty, but when then I go and charge it since it didn't turn on at first (I have this british charger and a european adapter) and put it in the phone. I left it for a while to charge since the windows start button started flashing and now when I turn it on, it shows the Nokia start screen, then it shows that it's charging and then there comes a blue screen that flashes and it vibrates after that. Again the Nokia start screen shows and the blue screen flashes again, vibrates and Nokia screen again and so it goes endlessly!
I have never gotten it to start it just flashes the blue screen and turns off again
See the video:
https://www.youtube.com/watch?v=b4eOmqirqRk&feature=youtu.be
WHAT DO I DO HELP!

Sounds to me like the charger you are using is not powerful enough. Are you using the charger that came with the phone? You mentioned adaptors etc so thought you may be charging with another charger. You could also try charging with high output usb chargers, typically ones for tablets.

Similar Messages

Out-of-the-box problem with L55-A5284 Laptop

I just purchased a Satellite Laptop L55-A5284, P/N PSKLAU-00H004.
I started setting it up with user name, wireless network to use, etc and I finally got to the Space Needle screen with date and time displayed. When I clicked on that screen, it went to the Microsoft login screen. However, once I put in my password, it then went to a blank screen and froze. I tried cycling power off/on and it came back to the same screen with the same results. I do not know where to go from here so any suggestions would be appreciated. This is also my first experience with Windows 8. Thanks
Solved!
Go to Solution.

Thanks for the replies. I finally got through to the Toshiba help line and they were able to help me reset the system by removing all power and depressing the power button for about 15 seconds before powering up again.

Nokia Lumia 1520 upgraded to Windows Phone 8.1 G.D...

Hello reader(S),
Today I accepted the Fast Ring (which was the only offered ring) programme on my Nokia Lumia 1520 to install the latest preview builds of Windows 10 and provide feedback for Microsoft... but here's the odd part, it installed Windows Phone 8.1 Update 2/G.D.R. 2 and doesn't show anything even remotely related to Windows 10, whenever I go back to the Windows Insider Hub it tells me that it'll reboot my device, then it shows me everything that's new in Windows Phone 8.1 (Blue) - with Nokia Lumia Cyan, and then doesn't change anything. It had an oddity in the ''migrating your data'' portion of the update where it went, and then I'd literally watch the bar roll back, where it went, and then I'd literally watch the bar roll back, where it went, and then I'd literally watch the bar roll back, where it went, and then I'd literally watch the bar roll back, where it went, and then I'd literally watch the bar roll back, OVER and OVER again, after a while the update was done rolling out and since my Nokia Lumia 1520 is already a rubbish phone that constantly crashes and is so inusable for anyone without the patience of a Shaolin Monk that I can't give it away as a gift (I intend to give it to my sister eventually...), now I bought a Microsoft Lumia 532 mobile telephone last week, but after reading that some ''cheaper'' mobile telephones have trouble with Windows 10's technical preview I ought to install it on my Nokia Lumia 1520 which severely lacks in every respect, is a bug-fest and I wouldn't mind it getting "bricked".
¿So how can I install the Windows 10 preview? Note that I don't have a developer's account and did not download it via the Windows Phone Developer Preview Hub, I installed it over Windows (Phone) Update and did it exactly as other Windows Insiders previously have.
Sincerely,
Tula, the Quang

I also forgot to mention that I indeed have tried to roll into the Fast Ring programme again with no avail.

Can i reset N8 to out of the box condition?

Hi everyone,
I was thinking of restoring nokia N8 to "out of the box"(just purchased) condition. As we know that a soft reset(*#7370#) along with a factory reset(*#7780#) does exactly the same thing in a s^1 phone and one doesn't loose anything that comes as a part of firmware(or as i understand, please confirm/clear if its otherwise).
But in case of s^3 devices(came to know from a sticky thread above), its not the case and one looses some stuff that came preloaded on the phone(should be part of the firmware as far as i understand).
So what i want to know is the consequences of (i.e. what i loose from my phone):-
1. Performing a *#7370#
2. Performing a *#7780# 3. Pressing the power key for 8 secs
On a nokia N8.
I want to restore the original folder structure and keep my device neatly managed(a bit obsessed to keep things in order, though i'm not suffering from obsessive compulsive disorder, lol). So please help me to achieve this.
[N.B: i don't want to go to nokia care point to get this done, or to get stuff reloaded if i loose something that came preset].
Thanks for patience.

@Roshanrims
Last observations are that not surprised N8 so cheap on pre-owned market as who can be bothered faffing around (after three finger power on reset to remove data) when selling to try to get it back as it should be.
Be aware that irrespective of "Hard reset" or re-flashing firmware whenever OVI Store is opened again on N8 it asks are you "username" and asks for password!
Have always found that after "hard reset" always seems to fail initial prompt to sign in to Nokia account with "try later" but that maybe because in marginal mobile reception area.
Long as you copy any .dcf material off mass memory it can always be restored later.
Happy to have helped forum with a Support Ratio = 42.5

Nokia Lumia 1520 having problems with Voyager Lege...

I recently purchased Nokia Lumia 1520 and I am having some problems with Plantronics Voyager Legend. Before 1520 I was using HTC Radar 4G with Plantronics Voyager Legend and I don't have any problems. The problems that I am having are, when I am on a call using the Plantronics Voyager Legend the voice of the person will automatically switched between Plantronics Voyager Legend and 1520 through out the entire conversation back and forth. It does read all my text messages without any problems. Another problem is on my HTC Radar 4G once I turn on the Bluetooth under setting Bluetooth stays on even after I reboots the phone. On 1520 after rebooting the phone Bluetooth is off automatically by the Windows 8. Why does it do that? Are there any workaround or fixes for my issues

My Voyager Legend firmware is up to date. This Voyager Legend works with all my others electronics without any problems. Problem with Nokia Lumia 1520 only. I think the problem is 1520 Windows 8 OS. I am waiting on Plantronics to contact me but looks like I am at the bottom of the list. Does anyone know why after rebooting the 1520, Nokia Windows 8 OS automatically turn the Bluetooth off in setting, under Bluetooth everytime?

Nokia Lumia 1520 - Screen Brightness Problem

I have two Nokia Lumia 1520.
Both of them have the same problem. I will explain the problem to you in detail and before that let me assure you I am a Windows Phone long time user , have been part of the development , developed several apps for the platform and I have used Lumia 800 , 720 , 920 , 925 and now 1520. So I am well aware of all the settings , sunlight readability , automatic brightness etc. This problem is not due to any of these , I can assure you
Now the problem ,
I set the automatic brightness option OFF
I move the brightness to HIGH
Then I lock the phone
When I unlock the phone , the brightness drops by 10% suddenly without any intervention
This problem happens sometime. Some days I see this problem , some days I don't and there are few days where I see this problem very heavily.
I purchased another 1520 and it has the same problem. I am very sure , from my experience that this is a firm ware issue. This is NOT a hardware problem , but a serious problem from your software end. It is prudent that Nokia recognizes this problem and finds a solution to this. Interestingly , I am not the only one who is facing this problem , the whole globe is facing the same problem and for such a pricey phone , this is a frustrating experience - very frustrating. I am sending some links , which will show the problems users are facing:
http://forums.wpcentral.com/nokia-lumia-1520/255608-lumia-1520-screen-brightness-dimming-unwantedly-...
http://forums.wpcentral.com/nokia-lumia-1520/251303-screen-dimming.html
http://forums.wpcentral.com/nokia-lumia-1520/252501-screen-brightness-fluctuates-purpose-bug.html
http://forums.wpcentral.com/nokia-lumia-1520/255508-lumia-1520-screen-brightness-problem.html
The phone is rock solid and amazing except this irritating problem.
I have only few days within which I can request a exchange from the merchant. So if any Nokia official can confirm that a software fix is on the way , it would be super helpful
Nokia , please help !
Moderator's note: We have removed the IMEI numbers. Posting of personal information is not allowed in this forum for security purposes.

I have Nokia Lumia 1520 Black.
I have also been facing the same problem with screen brightness.
The problem occurs only when the Brightness is in Automatic mode.
--> When the Brightness is set to Automatic mode & take out from dark location to bright location the display turns out to weird grey color.
--> And then if the brightness is set to low, medium or high display comes to normal.
Is this issue related to the hardware or software.
If it is related to the Software will you be able to fix it ? or else How about the replacing with the new one ?
Awaiting for the response.
nonnin8 wrote:
Same here i have white 1520
I have another problem with the screen, when it wakes up or i get a call the colours are off grey colour are very light grey and after few moments it turns to normal.
I am using WP 8.1

String problem using B1ITM2B1ITM out of the box B1iSN 8.8 scenario

Hi all,
    I am testing the out of the box scenario for Item syncronization (B1 to B1)
It works fine except for one thing:
    If the ItemName contains xml special characters like < > & in the xml message they are correctly converted into xml rappresentation < > amp; but when the message is sent to the destination company doesn't happen a reconversion to the readable rappresentation.
What do I have to do to have the exact rappresentation even in the destination company? Should i have to put translation tags into the xsl transformation? If so which they are?
Thank you all in advance, Regards Luca.

Solved...
    I found a bug in the conversion to xml format:
>   is uncorrectly replaced with &gt;
so I have replaced:
<ItemName>
     <xsl:value-of select="BO/Items/row/ItemName"></xsl:value-of>
</ItemName>
with:
<xsl:variable name="itname">
        <xsl:call-template name="b1ilib.strgReplace">
             <xsl:with-param name="subs"><</xsl:with-param>
          <xsl:with-param name="var">&lt;</xsl:with-param>
           <xsl:with-param name="wstrg" select="BO/Items/row/ItemName"></xsl:with-param>
     </xsl:call-template>
</xsl:variable>
<ItemName>
     <xsl:call-template name="b1ilib.strgReplace">
            <xsl:with-param name="subs">></xsl:with-param>
            <xsl:with-param name="var">&gt;</xsl:with-param>
            <xsl:with-param name="wstrg" select="$itname"></xsl:with-param>
     </xsl:call-template>
</ItemName>
A similar problem has been detected here:
B1iSN: Tips, tricks and important topics

X4100 LOM problems out of the box

Straight out of the box I am having trouble connecting to lom. Using a serial cable I can connect and see the lom service start after power is connected, when the login line appears i loose control of the session. Any ideas? I don't know what the IP address is set to so I can't setup via browser.

Well, I took my 16GB iPhone 3g (white) back to the Apple Store today and the Genius looked it over -- said that's the first keyboard problem he's seen come in and mentioned that it was strange the "dead zone" on the touch screen was vertical since, according to him, most "dead zones" tend to be horizontal areas. He said the touch screen matrix is laid out in three horizontal bands on the screens.
Bottom line: he gave me a new working iPhone 3g.
He did mention that all returned iPhone 3g's are being sent directly back to the iPhone 3g engineering team for full "autopsies", not just sent back to factory for refurb. He said they want to fully diagnose and understand what defects are out there so as to solve the root cause moving forward.

Brand new IPad 3 out of the box - set up problem with Apple ID

Brand new iPad 3 out of the box - set up problem. It says my Apple ID (email address) is already being used. I reset the password successfully but still says I need another Apple ID. Why won't the ID recornize me?

Open current iTunes on your computer. Connect iPhone to the computer with the Lightning USB Cable. Hold both the Home and Power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, make Genius reservation or set up Sevice and take or send to Apple for resolution under Warranty.

MacBook Pro 15" i7, out of the box w/problems

My MacBook Pro is brand new out of the box, less than 48 hours, and I'm already having issues with it.
Before the first 24 hours out of the box, I got a message for a forced shut down (see image here: http://www.mactropolis.com/wp/wp-content/uploads/2009/01/macosxkernelpanic.png)
The following day, after coming out of sleep mode, I found it with a scrambled screen.
I haven't installed or transferred anything onto it whatsoever, but just been using Safari. I've heard that people are having problems with using Safari with webpages using Flash, but that might not explain the forced shut down.
I ran disk utility after the forced shut down and a few permissions were fixed but there were no other problems. After the scrambled screen, I ran an extended hardware test twice, and no problems were detected
I'm not sure there are any grounds for taking this to the Genius Bar, but I'm rather irritated for this to be happening when I haven't really started using this computer for more than browsing the internet.
Any suggestions? Might it be as simple as using something other than Safari?

The solution is extremely simple, return it for another. If you bought it from an Apple Store it should be no problem. If you bought it from an Apple Reseller you need to deal with them directly.
Don't wait, do it today.
Roger

Problems with the out-of-the-box Worldnews portlet

Hi all,
I'm having problems when I try to add the out-of-the-box portlet called "World
News" to a portal of my own. Have anyone had problems like that?
More specific I'm getting an XML parsing exception when I add the world news to
my portal. It is strange because the portlet look ok at first but when I try to
select some news source I don't see any of the news afterwards.
Hopefully someone can help my
Stig

Thanks! That was a great help :-)
"Peter Laird" <[email protected]> wrote:
>
Stig,
This is a known bug without a resolution currently. It is being tracked
internally
as CR064184 and is targeted to be fixed for 4.0 SP2.
Sorry!
PJL
"Stig Boye Andersen Aatland" <[email protected]> wrote:
This is the stacktrace hopefulle this will help. If not thanks anyway!
weblogic.xml.jaxp.RegistrySAXTransformerFactory
java.lang.ClassCastException: weblogic.xml.jaxp.RegistrySAXTransformerFactory
at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1509)
at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:800)
at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:376)
at examples.worldnews.pipeline.ejb.internal.MoreoverNewsPCBean.process(MoreoverNewsPCBean.java:133)
at examples.worldnews.pipeline.ejb.internal.MoreoverNewsPCBean_79tma7_EOImpl.process(MoreoverNewsPCBean_79tma7_EOImpl.java:37)
at com.bea.p13n.appflow.pipeline.internal.PipelineExecutorImpl.executePipeline(PipelineExecutorImpl.java:299)
at com.bea.p13n.appflow.pipeline.internal.PipelineExecutorImpl_x8bn7v_EOImpl.executePipeline(PipelineExecutorImpl_x8bn7v_EOImpl.java:37)
at com.bea.p13n.appflow.webflow.internal.PipelineProcessor.process(PipelineProcessor.java:157)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processTarget(WebflowExecutorImpl.java:1155)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:673)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:474)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:139)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:120)
at com.bea.portal.appflow.PortalAppflowHelper.invokePortletWebflow(PortalAppflowHelper.java:185)
at com.bea.portal.appflow.processor.PortletEventProcessor.process(PortletEventProcessor.java:97)
at com.bea.portal.appflow.processor.AbstractPortalProcessor.process(AbstractPortalProcessor.java:86)
at com.bea.p13n.appflow.webflow.internal.IPProcessor.process(IPProcessor.java:106)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processTarget(WebflowExecutorImpl.java:1155)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:673)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:474)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:139)
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:124)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doPost(WebflowServlet.java:213)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2459)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"Daniel Selman" <[email protected]> wrote:
Please post the exception stack trace.
Thanks,
Daniel Selman
"Stig Boye Andersen" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I'm having problems when I try to add the out-of-the-box portlet
called
"World
News" to a portal of my own. Have anyone had problems like that?
More specific I'm getting an XML parsing exception when I add the
world
news to
my portal. It is strange because the portlet look ok at first but
when
I
try to
select some news source I don't see any of the news afterwards.
Hopefully someone can help my
Stig

Out of the box macbook pro 15" c2d problems

evening all,
right out of the box, i have had kernel panics every time i boot my new macbook pro c2d. i have also had the awake from sleep problem some people seem to be having. i am also unable to install either boot camp, parallels, or vmware. i have tried winxp, 2000 and vista in every combination. every time i try it corrupts the volume beyond repair and i have to wipe the hard drive and reinstall os x. i am getting worn out by banging my head against the wall. i thought this stuff was supposed to be easy. when i went to check on the firmware version for my macbook pro 15" c2d i noticed that i have the boot rom version and the smc version installed for original 17" macbook pro not the c2d version. it won't let me change the firmware back to a 15" c2d. it is showing MBP12.0061.B03 1.5f10 and i should have MBP22.00A5.B00 1.12f5 according to apple specs.
i will try to reset my smc, but the pram can not be reset via the usual keyboard combination because it just doesn't work like it did on my powerbook.
i am also going to try disabling the hibernate mode as suggested via terminal.
i am going to try trashing the plist preferences for the .AutoWake, PowerManagement and the systemuiserver.
i also have the problem when reinstalling os x several times that the optical drive gets stuck reading the original system disks and i have to start all over again. whew!!!
btw, i am a hardware tech but this is too much of a waste of time.
any other suggestions are very welcome.
macbook pro 15" c2d Mac OS X (10.4.9) tricked out powerbook 15"

here is an update for everyone, or at least you will get a good laugh out of it. I sent the macbook to applecare to be fixed and I just got it back. they replaced the harddrive and restored the os.
guess what? I turned it on and it had a kernel panic! then I tried to set up a user account and it had a ......... kernel panic! I had to laugh, what else can you do at this point?
they didn't fix what i told the tech support guy was the biggest issue on this machine. the boot room version is still MBP21.00a5.B01 which is for the 17" C2D. it is paired with the smc version 1.12f5 which is the version apple has listed for the 15" version. tried to change the boot room but it tells me it does not need the correction. everyone knows best yet i still get ....... kernel panics.....! lmao
here is the last kernel panic log if anyone is interested:
Wed Apr 18 13:35:56 2007
panic(cpu 0 caller 0x001A3135): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x0a124a48, CR3: 0x00c85000, CR4: 0x000006e0
EAX: 0x0a124960, EBX: 0x02cd7008, ECX: 0x0000e070, EDX: 0x00000000
CR2: 0x0a124a48, EBP: 0x13dfb879, ESI: 0x0253ac00, EDI: 0x00000000
EFL: 0x00010203, EIP: 0x2a5dcb57, CS: 0x00000008, DS: 0x56b50010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13dfb678 : 0x128d08 (0x3c9afc 0x13dfb69c 0x131de5 0x0)
0x13dfb6b8 : 0x1a3135 (0x3cf7b0 0x0 0xe 0x3cefe0)
0x13dfb7c8 : 0x19a904 (0x13dfb7e0 0x0 0x989607 0x0) Unaligned frame
Backtrace terminated-invalid frame pointer 0x13dfb879
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Wed Apr 18 14:06:31 2007
panic(cpu 1 caller 0x001A3135): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0xd8505ed5, CR3: 0x00c85000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0xd8505ec1, ECX: 0x02bc806c, EDX: 0x02c4e6e8
CR2: 0xd8505ed5, EBP: 0x13ea3df8, ESI: 0x000e0000, EDI: 0x00000000
EFL: 0x00010282, EIP: 0x0017e42a, CS: 0x00000008, DS: 0x02c30010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13ea3bd8 : 0x128d08 (0x3c9afc 0x13ea3bfc 0x131de5 0x0)
0x13ea3c18 : 0x1a3135 (0x3cf7b0 0x1 0xe 0x3cefe0)
0x13ea3d28 : 0x19a904 (0x13ea3d40 0x2d18b88 0x2c8fba0 0xe)
0x13ea3df8 : 0x1607c1 (0x2c4e6e8 0xe0000 0x0 0x1)
0x13ea3f48 : 0x1a33a8 (0x11b9c80 0xa35a3000 0x0 0x1)
0x13ea3fc8 : 0x19a834 (0x2bd3c40 0x0 0x10 0x0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff5f8
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
macbook pro 15" c2d Mac OS X (10.4.9) tricked out powerbook 15"

I have a new iPad2 - just out of the box. Everything works, except I cannot download or update applications. It will not accept my password. My iPod will accept the password. What might the problem be?

I have a new iPad2 - just out of the box. Everything works, except I cannot download or update applications. It will not accept my password. My iPod will accept the password. What might the problem be? Any ideas?

Brock8821-
Use iTunes on your computer. With the iPad connected, sign into your Apple account and check for updates.
Doing this should straighten out the problem.
Fred

MSI Media Live problems out of the box! :(

Hi everybody!
I have recently bought an MSI Media Live from ebuyer with the hope if replacing and improving on my old MegaPC.
Out of the box all looked well and started to fill the barebones box with all my bits and pieces. Bought an AMD AM2 chip for it and put in some memory from another PC DDR2.
The machine on switch on started the obligatory BIOS checks and off we went. Or so I thought.
First of all I placed my Media Centre 2005 cd in the drive and the machine point blank refused to boot from the CD drive. After a while I thought I would stick XP Home in and do an upgrade from within. The XP Home disk came up with the line about checking system configuration and then hung. This happened repeatedly.
Next plan was install Media Centre on the HDD using another PC. So swapped the RAM back out and the HDD and went for the install. This went without a hitch on the other PC so after the install swapped the RAM and HDD back into the media live.
The Windows startup screen then came up but would get stuck in a reboot loop before windows started. If I asked to boot into safe mode the machine would start. This leads me to believe it is a software issue. While in safe mode with networking, managed to get all the updates I could find for both windows and MSI. However still can't get the machine to start in anything but safe mode which is driving me nuts because I can see what the machine is capable of but just can't get into it!
If anyone has any ideas they will be much appreciated. Have run RAM checks and swapped all parts out to make sure they work in other machines which they do and obviously there is nothing wrong with the install CD.
Just seemed to have reached a dead end!#
Thanks in advance.
Alex Smith (In need of a stiff drink!!)

Quote
Next plan was install Media Centre on the HDD using another PC. So swapped the RAM back out and the HDD and went for the install. This went without a hitch on the other PC so after the install swapped the RAM and HDD back into the media live.
The Windows startup screen then came up but would get stuck in a reboot loop before windows started. If I asked to boot into safe mode the machine would start. This leads me to believe it is a software issue.
You can't install Windows on one PC and then transfer the drive into another PC, it won't work unless the other PC is identical, due to differences in hardware abstraction layer and core system drivers.
Have you anyway of trying another optical drive? If you can't, you may want to return the unit to Ebuyer for replacement

Nokia Lumia 1520 OVERHEATED Symptoms and Died Afte...

My new phone Nokia Lumia 1520 is beautiful and it works great. I like its big 6" screen and everything else it was designed to do.
However, for first two months of using this new phone, it started showing overheating problem. I remember overheating occurred at least 4-5 times in last two month period. Last time overheat issue got really worst yesterday. It was not hot enough to burn your skin but It got to the point of intolerable. Overheat happens when my phone was heavily in use: frequent calls, texting, and internet usage, and other apps running in background like Microsoft OneDrive Cloud. I talk many times over 15 and 30 minutes long on the phone, and the phone heats up. When it overheated, I stopped using the phone and let it cooled. It cooled off after it has a little rest. The battery was always good; it runs almost of the entire day and only needs recharge at end of day.
Then until yesterday, I turned on the feature "Internet Hotspot Sharing" in Settings for very first time to get my laptop online. I worked on my laptop for several hours. When I got home last night, Nokia Lumia 1020 was completely knocked out. It went blank and unresponsive. I left it charging the entire night. This morning, it didn’t even turn on or off. It was just a dark screen, dead weight.
Today I am going to take it back to AT&T service store and have it checked out. I went online today and found this overheat discussion going on, and so here I post my facts to share with everyone.
Usage in 2 month period (60 days):
Phone calls: 1,503 times, 25.1 calls per day
Phone call length at least 60 minutes: 1 time
Phone call length at least 30 minutes: 17 times
Phone call length at least 15 minutes: 66 times
Total minutes used: 5,271 minutes
Total Picture/Video /Text/Data Used: 735 times, 24.5 messages per day
Data used: 168 times
Text used: 476 times
Picture & Video Used: 91 times
Total data used: 3,695 MB or 3.6 GB
Solved!
Go to Solution.

To: yasfer21 Mobile Visionary
Looking at the statistic of many people reporting overheat problems with the phone. Does that tell you something? I think Nokia is aware of their inferior product. Nokia needs to improve their product quality or risk of losing customers like me. I'm one of many reports about overheat problem. This is not an issolated issue; it's commonly reported from users like me regarding this phone.
I will be happy to show you proof of my transaction with AT&T. I can post it here for everyone to see. I bet if you go to Nokia assembling facility, you would probably see tons of returned overheat phones. Research it yourself rather than speculating. Your thought is irrelevant to the overheat issue experiencing by users.
The replacement phone I received from AT&T seems to be working fine now. It's working ok. Overheat issue has disappeared from the replacement phone. I will post my comment again if overheat issue repeats. Technology we using today is just a temporary for a better invention and idea tomorrow. Remember we have progressed from a little pager device clipped to your waiste 20 years ago to smartphone screen today?
There's no such thing as perfect on this planet earth, ranging from birth defects to space shuttle disasters Challenger & Columbia. All we can do is to learn, improve, and keep on moving toward Type 1 Civilization. We can never reach a perfect point, our universe is forever expanding.

Nokia Lumia 1520 out-of-the-box problem

Similar Messages

Maybe you are looking for