Nokia Lumia 720 Touch not working even after repla...

Hi ,
I had bought lumia 720 on 31/05/2013 , but on 28/12/2013 the touch was not working or the touch was working on its own. Since my phone was in warranty then, they replaced the touch free of cost. But again from 20/08/2014 my phone is having the same problem, touch not working. When i showed it to Nokia care, they told that again they need to replace the touch , it will cost around Rs. 7950 (since my phone was out of warranty this time)... My question is, within 1 year 2 months , twice the touch pad has problem. What kind of phone it is .... Please think before buying Nokia touch phones, I think still they are far behind in touch screen technology ( no offense :-) )....
Not only me, one of my friend also facing same problem with Lumia 720 ....

Not beeing familiar with other countries consumer laws and consumer rights, I can only speak for my self and Norway. But as far as I'm concerned I would have expected extended rights for the new parts and the labour. - If however the fault can relate to the parts involved with the mentioned replacement.
But if this is not possible in your country, there isn't much to do other than repair it for pay or leave it.

Similar Messages

Nokia n97 web feeds not working even after v12

It just says to me that the feed is invalid. Is there a workaround? The feeds worked a month ago or so, but some update has broken them.I'd rather not do a hard reset at this point again.

Have been experiencing problems with the web feeds (used to work without any probs) and hoped that the new firmware update (V2.1) would fix things. I'm getting "Unable to open feed" messages.
Tried deleting and re-entering the old feeds from the PC, then N97, but still same problem.
Checked Web Feeds in Settings and it's set properly to my T-mo Internet access point.
Anything you think I should check? I really don't want to do another hard reset, but at a last resort, I will.
Thanks, all!
Ken

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

Webcam is not working even after I reinstall the system software

My webcam is not working even after I reinstall the system software.
My questions are follows:
Should I bring it to repair or get a external webcam?
At approximately how much would be cost for repair?
Which webcam I should get?
Thank you very much!
Tian

Update, I fixed it although it feels more like a workaround. I had to enable the extension in extension manager. That still left a blank panel, but once I closed and reopened the panel I was prompted to login. Seems that closing and reopening the panel is the fix once it is enabled.

All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

Window 10 upgrade. Graphics driver not working even after re-install

Notebook pavilion DV6 3280. Just upgraded to Windows 10 and AMD graphics driver not working even after re-install. What do I do? Is there another driver not on the HP Website that I should try?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Lumia 720 drained so fast even after charging 100%...

Hi all,
I have Nokia Lumia 720 bought a couple of weeks before. I had an update done yesterday for nokia music. And today I have nearly 15% left. Is it something happened after the update? Please help. I am scared to charge again as the same kinda thing happened with my samsung galaxy y dous. Its motherboard is damaged. I dont want the same thing to happen to my new lumia.

meerajpai wrote:
Hi all,
I have Nokia Lumia 720 bought a couple of weeks before. I had an update done yesterday for nokia music. And today I have nearly 15% left. Is it something happened after the update? Please help. I am scared to charge again as the same kinda thing happened with my samsung galaxy y dous. Its motherboard is damaged. I dont want the same thing to happen to my new lumia.
after the update, some of the settings may have been altered. here are a few big holes i found causing my battery to drain...
- wifi (should be off when not in use) settings> wifi
- bluetooth (should be off when not in use) settings > bluetooth
i also noticed when i travel (riding around the city or crossing country), the battery drains faster.. perhaps because the temperature is higher. but i think its more about the fone automatically trying to intercept netowrk signals from different cell sites as i move along.
if you haven't yet, this is a good battery app...

Touchpad does not work even after format - x220t

Hi there,
I've had my X220 tablet for about 10 months and it has been great. For the last month however, the touchpad and touchpoint have become flaky. When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing. I have also updated/reset the BIOS.
I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating.
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that. When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled. I am not sure of this, but it is my belief now.
Are there solutions out there for me? I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
thank you,
steve

xyster wrote:
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
If you are ready to reinstall Windows, try this method:
http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

MacBook Keys not working even after KeyBoard Firmware update

My friend's sister bought me a MacBook from the US last October. Fortunately, Apple announced the release of Leopard also on the same month and I got a free upgrade to leopard. I installed leopard about 3 months back. My keyboard was working fine when I had Tiger installed. After I installed Leopard, I remember installing a Keyboard firmware update once through the Software Update.
About two three weeks back, my MacBook started acting wierd. Some keys were not working (mostly 't', 'q', left shift, left command, zero which is not working even now. I couldn't close the last bracket because the key is not working. I am a php programmer and I can't think of living without the closing bracket and zero keys . But most of the keys works on and off.
After seeing on several sites that it is a problem with firmware, I once again downloaded the firware update, but couldn't install it since the installation wizard says that my system doesn't need it.
Can someone plz tell me what to do now? Will reinstalling help?
Thanks in advance.

The problem persists everytime I restart my system or wake it up from sleep. But each time different keys have problem. I am now downloading update 10.5.4. Can someone plz help me?

Accidentally deleted x protect meta.plist and plug in not working even after downloading latest

Hi all
Need some help here. It started off like this - after upgrading to mavericks, i had a problem viewing some java stuff. Googled and read somewhere to delete the x protect meta.plist and thus, did so. After doing that, my youtube videos etc all couldnt work. So googled again and did whatever the rest suggested - download latest version of Java, uninstall java and reinstall again, install other versions of java etc etc. all didnt worked.
Someone just pointed out that I had deleted a very critical security file (x protect meta.plist) and might have more problems that I thought on my hand.
Im not very technical or IT saavy, so please kindly advise. Most of the problems surfaced after deleting that file. And right now, plug in for videos are still not working even though I have attempted various 'solutions' suggested in this forum (the not too technical ones) and java is still cranky. Pls advise. thanks!

Anyone able to help?
1) How did u solve the missing/out of date plugin?
- Have tried installing numberous times the latest version - doesnt work
- Tried uninstalling and then reinstalled earlier versions of java - doesnt work too
read somewhere to delete the xprotect meta plist - realised much later that piece of advice was for snow leopard OS and thus, did not work too. A forummer told me today this file is a critical security file and i should not have deleted it. WHat can I do now?
current situation:
still cant play youtube videos and other videos.
java on some sites still cant work

Touch screen in not working even after Hard Reset

My Palm Treo 750 stopped working and responding suddenly........i tried a soft rest which didn't worked i then tried hard reset but in both cases the device boots and screen pops up "Tap the Screen to Start The Device". However this is the point where my device hangs up even after resetting it several times. I have also downloaded reset software from the palm website but unfortunately it only runs/works from palm device. i have installed microsoft active sync from the palm CD and my device is detected and syncronized using USB cable which prbably shows it doesnot have a hardware issue.
Post relates to: Treo 750 (AT&T)

Remove any screen protecters or cases, then hard reset again. If the problem continues then it will need to be repaired or replaced.
Post relates to: None

Lumia 800 touch not working and battery question m...

I have been quite happy with my two months old Lumia 800 until recently when I accidentally dropped it on cobblestone and damaged the glass. Although the phone still worked I ordered a new combined glass, digitizer and screen from an internet supplier. The spare part was OEM and it was relatively painless to replace the old screen with the new screen. However, after replacing the screen, touch did not work and a question mark appeared over the battery icon. I searched the forum and other places on the internet and found out that this type of issue had been seen before and that it in some cases could be fixed by an upgrade of the firmware and a hard reset.
Now a few frustrated days later I am starting to think that possibly the replacement part is faulty as I have tried various firmwares, various ways to charge the battery with various types of USB chargers, but still no success. The phone simply won't respond to touch. Currently I am on firmware 1750.805.8773.12220.
Would any of you in the forum have any ideas what could possibly be wrong? Could it be a broken cable to the screen? I had similar issues with an iPhone 3GS which turned out to have a dodgy ribbon cable connecting the phone and the digitizer, but I cannot seem to find anything on the net mentioning this as a potential problem and I am wondering just how likely it is that the part is faulty, when the screen works fine and only the touch functionality is not working.
Any ideas would be much appreciated. It is very difficult to get in touch with Nokia in Denmark as their support phone is not working and the websites chat functionality seems to be off line all the time.
Best regards,
Anders

You shouldn't have used the phone at all after it dropped in Water.
Only Nokia Care can assess the extent of damage and tell you the repair cost. First, they should accept the device for repairs..and Second, this is certainly not covered under Warranty ..
Even if the phone is repaired with replacing a few components, not sure about the effect of the seepage on other parts which may start acting in a short span ...

Nokia Lumia 720 Touch not working even after repla...

Similar Messages

Maybe you are looking for