Nokia map, please help,,Flash,
hello
1 .how can i understand my Nokia N95 made by finlandor Germany ??? and not made by other likr china,Hungary ???
from IMEI code can understand ?? How>>>
2. I must buy a flash for my N95 for get capture in night ??yes >>
3. I download Nokia maps guide.pdf, it write for use maps you must have EDGE,UMTS,HSDPA OR Wireless LAN for use map, But in iran i think dont have any of this for operator ???
can you help me???
You can get the MapLoader from http://www.smart2go.com and use it to download maps through your PC and the PC's Internet connection.
Similar Messages
-
ISync WONT Sync with Nokia N95 please help!
HI can anyone help me please!
I'm running OSX 10.4.10 on a Macbook pro.
I have downloaded the N95 plug in. - and run it first.
Paired the two (deleted previous pairing)
Ran iSync (2.4(501.2))to add device which sees the N95 and reports that iSync cannot connect to this device.
What am I doing wrong?
PLEASE help this is frustrating - Ive tried pairing both ways with still no joy!Hi. I managed to sync my N95 to my iMac by doing the following after downloading the iSync plug in from Nokia.
On the N95 > Menu > Tools > USB > USB mode = PC Suite (I know it's PC Suite- but it syncs for me).
To get photos from the N95 into iPhoto, I changed the USB mode to data transfer.
Good luck with it! -
PLEASE HELP flashing light and playbook doesn't switch on!!
Hello,
I have my tablet won't switch on and when I try to turn on, the red light and green light flashing 5 times. And then nothing. Unable to turn on.
I tried a reboot by pressing power + volume - and nothing!
I tried to update with BlackBerry Desktop Manager (latest version) and when the update reaches the end error message comes to me and it there was a problem: "A connection to the tablet Could not be ESTABLISHED. Please connect your tablet and try again. "
I also tried to charge it with a 2000mA charger for several hours and still nothing.
I no longer guarantee
Please help me, I do not know what to do.
thank you
sorry for my englishSame thing happened to me yesterday. After the error message, I plugged in the charger. It took quite a while but the tablet started charging. It reinstalled the update when it reached the 20% level. Another update error came up to change my setting. I checked my setting but didn't change anything and just reinstall update again which this time was a success. Hope this would help.
-
Please help (flash intro cs4)!!!
sorry if I posted in the wrong section but I need help.
I have a flash intro and when ever I preview it,the intro background turns to black instead of staying the way it should be.Can somebody please help me out here,I need this flash intro for a website.Please explain this to me in simple terms because im pretty NEW to adobe.
Thanks
Kevin
Note I've tried everything to make the flash background stay the way it was but nothing I do works.the color is black
watch this intro
http://images.templatemonster.com/screenshots/21000/21016.html
i have this intro. I open it in flash and play it. As soon as the Offbeat idea text goes away the background fades to black instead of staying consistent. -
Hi,
I have a requirement with the source structure looking as
Sourece :
ACCOUNTGL 0....1
item 0...unbounded
ITEMNO_ACC 0....1
CURRENCYAMOUNT 0....1
item 0...unbounded
ITEMNO_ACC 0....1
CURRENCY_TYPE 0....1
CURRENCY 0.....1
XXXXXX 0......1
TARGET STRUCTURE
E1BPACGL09 0...Unbounded
ITEM_TEXT 0......1
All the fields of target E1BPACGL09 is mapped from ACCOUNTGL node of souce and the field ITEMTEXT under node E1BPACGL09 should have the condition .if the CURRENCY_TYPE is 00 and if ITEMNO_ACC in the segments ACCOUNTGL and CURRENCY AMOUNT are equal then we need to create a E1BPACGL09 with ITEM_TEXT concatinating CURRENCY and other field XXXXXX and pass it to ITEM_TEXT at target.Please help me in this .
Is it possible through graphical mapping If so how please help .
Thanks
RajeshHello,
Were you able to check my response to your earlier thread GL ACCOUNT Mapping help ?
Regards,
Mark
Edited by: Mark Dihiansan on Jan 17, 2011 3:48 AM -
Please Help, Flash Player for Mac
I am running Mac OS X 10.7.5. Last night Facebook told me I MUST update to the newest version of Flash Player in order to upload multiple pics. I kept getting plug-in failure messages and then the message saying I need to update my version of Flash.
Problem is I have updated my version of Flash and the plug in still doesn't work. Please help, my business relies on my being able to upload multiple photos daily to social media. What is going on? I have read the forums, the work arounds posted on 4/16. Uninstalled, re-installed, etc. I am still getting flash plug in failures even on Adobe's site. What do I do?No.
I am in the same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine. -
Please help--flash 9 wont download
I am slowly realizing that there are a lot of things that
require Flash Player 9. I have tried at least 15 times to install
this, but everytime it pops up the security box, i click install,
and the 'F' comes up with the spiral underneath. It goes away, the
security box reappears, i click install, and the little boz where
the 'F' was is empty, then it goes away, turning to quotation
marks. Why wont it work? i am on my acocunt with administrative
rights....please help! Thank youfirst, if your not using firefox, got to mozilla.com and get
firefox. it the best browser there is and the add-ons that you can
get to enhance it are the bomb. Next time you come across something
that requires flash it will automaticlly download it. -
PLEASE HELP-Flash Version 9.0
Everything was working fine this morning. I went to the
Playhouse disney.com website for my sons. It said I needed to
update my flash player. I downloaded 9.0 for MAC powerPC (I have
version 10.5). The download did not finish, stating I needed a
different plugin. It redirected me back to the same page for
downloading 9.0. I did the uninstall flash player. It said it
worked. I tried to install 9.0 again. Now, it said that I don't
have permission to access the installer. What do I do? If anyone
could please help me, I would really appreciate it!!!
This is the error message I get- 1008:5-5000 Denied Access
ErrorHi oneksrose,
Send me a Private message with your fullname, email and phone
number and I'll open a case for you and get this resolved.
"Send Private Message" is on the left panel under my user
name. I look forward to hearing from you.
Important Note: These online forums are for user-to-user
discussions of Adobe products, and are not an official customer
support channel for Adobe. If you require direct assistance, or
prefer to contact Adobe support staff directly, please contact
Adobe support. -
Please Help, Flash CS.6 Won't startup
I Downloaded and Installed Flash and i Tried to run it but it keeps giving me this message
" the procedure entry point ?_Xruntime_error@std@@YAXPBD@Z could not be located in the dynamic link linrary C;programFiles/Adobe/Adobe Flash CS6/boost_filesystem.dll"
I tried to fix it but i couldn't get anywhere. Please help me. I need it for work in 3 days. please helpPlease see the notice at http://forums.adobe.com/community/robohelp/robohelp_flash
Right question, wrong place.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Please Help - flash Intro how to link to nex page
HI there
The end of the flash intro, i have one link on the bottom (
skip intro)
I want th end of flash intro, it will automatic link to next
page ( mai.htm) without click any link or.....
Please help
Thank you
GraceHi
Add this code to the last frame of your intro:
getURL ("yourlink.html"); -
Broken screen nokia C5 Please Help
Hi I've broken my screen on my Nokia C5 and as my contacts where saved to my phone not my sim i am unable to retrieve them. Could anyone please help or step me through navigating my way round this??...
Yes it was.
I managed to fix it. Looked up a few screenshots on the net, and I was able to blindly navigate and change the settings -
Nokia 6233 -- Please Help!
My phone keeps going to a blank screen
About an hour ago, a little sign decided to pop up at the top of the screen, like, the symbol that appears when you send a picture message, it keeps trying to connect to the internet, but every time that the little box appears round the G the screen either goes blank, or turns itself off!
Does anyone know what i can do to stop this happening?
Please help Message Edited by omgtsa on 18-Nov-200709:41 PMI guess you have a problem with your firmware..
I strongly suggest that you update your phone's firmware.
the latest firmware for nokia 6233 is 5.60.
check here for more info: http://migs.wordpress.com/2007/11/16/its-official-6233-firmware-560/
MiGs
migs.wordpress.com
nokia 6233 addict! and NSERIES reviewer -
Can't flash kernel in nokia n900, please help.
My nokia N900 has suddenly has gone into weired loop of showing error message>>rebooting>>again error meesage...
message says "can't flash kernels, required files not found
Guru Meditation #00000025.62017712"
I tried flashing and downloaded "Flasher", "WinFlasher_3.12.1.exe", since I've windows 7 in 32 bit operating system.
It opens properly, but after i give first command "flasher-3.5.exe -F pr1.2.bin -f". It shows prompt command and says nothing about detecting, as lot of post refers to.
Please someone help me on this.
Solved!
Go to Solution.First, Thanks a lot for replying.
Second, I'm not very familiar with linux. I followed the instructions posted by ceroberts75 as sticky at the first page.
1. Download the Flasher
2. Download the latest firmware image for your N900 (you will need your IMEI of the device)
3. when you save the global variant of the firmware to the "flasher-3.5" folder, save it as "pr1.2.bin"
4. When you save the vanilla file of the firmware to the "flasher-3.5" folder, save it as "vanilla.bin"
5. Turn your phone off
6. launch the flasher-3.5 program
7. type this command: flasher-3.5.exe -F pr1.2.bin -f
it will then scroll a bunch of gibberish and then say it is looking for a unit.
8. with the phone still off, hold slide the kb open and hold the "U" button while you connect the usb cable to the phone. continue holding the "U" until you see the faint "NOKIA" logo and/or the USB connection symbol in the top right. The flasher will find the device and automatically flash the unit to the original rom
9. after about 1.5 minutes, it will be complete. DO NOT DISCONNECT YOUR UNIT!
10. type this command: flasher-3.5.exe -F vanilla.bin -f -R
11. now it should reflash the device and wipe the emmc clean of EVERYTHING. after it reboots, you can disconnect it.
My problem starts after step 7. It doesn't scrolls any thing nor it says its looking for the unit. It keeps going back to prompt command.
I hope somebody can tell me what mistake I'm doing.
Thanks. -
URGENT Please help flash 8 components
I have written a .exe application that has a email submission
form at the end, the form is built up of flash 8 components. The
component ids are as follows:
fname.text;
femail.text;
fmessage.text;
fcountry.text;
fsubject.text;
On my submit code i have passed the fields using this method
fname = fname.text;
femail = femail.text;
fmessage = fmessage.text;
fcountry = fcountry.text;
fsubject = fsubject.text;
This is perfect and works first time no problems. My problem
is becasue the flash .exe never closes the component id's are stuck
at the last setting which is i.e. fname = fname.text; when the form
comes round again it doesnt work becasue its stuck at fname =
fname.text;
I need to tell the flash program to forget this after i have
submitted it and return it to fname.text = fname.text;
Please can you help, i'm pulling hair now and ive got a
deadline to sort this out :/
If the swf was on a webpage this wouldnt be a problem becasue
the swf gets loaded each time the page is refershed, but becasue
it's a .exe and never gets closed its stuck this way after being
run first.Nope ive tried all sorts
fname.text = fname.text doesnt work, its becasue fname.text
no longer exists its now fname, i need to set it back after submit.
I really need to get this working or i'm dead meat!
This is my submit code:
butt_send.onRelease = function() {
fname = femail.text
femail = femail.text;
fmessage = fmessage.text;
fcountry = fcountry.text;
fsubject = fsubject.text;
loadVariablesNum(form1, 0, "POST");
gotoAndPlay("home"); -
PLEASE HELP - FLASH OCX properties, need documentation
Dear all,
I am desperately looking for documentaion on the Flash
ActiveX control properties
(Quality, Quality2, AllowScriptAccess, ScaleMode,
ProfileAddress and so on).
I am developing a c++ Windows application which uses Flash in
its UI.
I managed to do the basic stuff (embedding multiple
CShockwaveFlash ActiveX controls
in a Windows dialog, communicating values between the C++
code and ActionScript).
What baffles me is that I did not find any documentation on
the control properties
- neither using Google, nor navigating Adobe LiveDocs etc.!
Please can someone provide a link?
Another topic I am very interested in is performance and
syncing between C++ and the Flash control(s).
In my current prototype, the Flash controls are not even able
to correctly display (read: without stuttering)
a simple second counter which gets its value set by the C++
code!
Amazing. As I am using a half-decent PC (2Ghz, 1GB RAM), CPU
Load and Memory Usage never come close
to anything above 30%, so I am asking myself what is going
on.
I suspect it has something to do with the Flash VM's garbage
collection, caching or stuff like that.
Any hints on this subject are greatly appreciated.
Cheers,
Patrick
P.S. I am a senior C++ developer, so don't spare any juicy
details you can provide, I'll understand without lengthy
explanations. :)I'm not sure if this will help or not, BUT, on the labs there
is a preview of project Alchemy, which allows you to compile C and
C++ classes into the Actionscript Virtual Machine:
http://labs.adobe.com/technologies/alchemy/
Maybe you are looking for
-
How do i get access to iTunes Brazil on my US-bought iPad and Mac now that i live in Brazil?
i am an american who now lives in brazil and i want to get access to the brazilian iTunes site, but my iPad and Mac that I bought in the US before i moved don't seem to want to download the regional iTunes. How can I get access and share my downloads
-
ORA-06502: PL/SQL APEX 3.2 Upgrade problem
We have 2 APEX environments on our 2 servers. Both servers are running Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production. One server was running APEX 3.0.0.00.24 (or thereabouts) and was upgraded to 3.2.0.00.27. The other s
-
Hi, <u>Question 1:</u> Can anyone verify that posting to non-leading ledger do not update SPL? <u>Question 2:</u> If this is the case, does anyone know if this is going to change in the near future? Thanking you in advance, Pavlos
-
Dear Gurus, I were learning about the intercompany using BPC 7M. The SAP BPC provides ICElimination script, SPICDATA & SPICBOOKING, US Elimination. I got SAP BPC documentation about SPICDATA & SPICBOOKING and not for others, I also read some threads
-
Hi I am working on data push in flex! I am using consumer component in flex to subscribe to server to receive the data push by it! Data push is happening for sometime and when I switch to other browsers and come back consumer is not listening to the