Nokia Maps 2.0 don't show maps on N95

Installed the latest firmware on the N95 (V21.0.016 14-02-08 RM-159 A5.01), formatted the memory card, installed Nokia Maps 2.0 (v2.0wk21b02), started it (in order for MapLoader to work properly), installed MapLoader 1.3.8, installed the swiss and german maps via MapLoader (the files are definitively in the 'cities' directory on the memory card), rebooted the phone then started the maps application again. The GPS works find but no map is displayed (even though I'm in Switzerland, everything is just green background, no matter what kind of view (satellite, hybrid, 3d, normal) I choose.
What's wrong? Bad quality assurance?

I got it working!!! I sure hope this helps you all too!!!!
Firstly, make sure you go to the app. manager on your phone (usually found in the applications folder) and delete the nokia maps 2 from there.
Also reformat your memory card.
Then do what needtogetfit posted but I've made it step by step for ppl like me LOL):
Connect your phone to your computer using the "data transfer" NOT PC Suite. A folder should show up, if not, go to 'my computer' and it will be there as "memory card" or whatever you have named your card.
Open it and you will see a few files in there. Make sure you delete the folder "cities" or "diskcashe" if it is still there and also delete a file called qf-file. (for some reason they seem to stay there even after a reformat etc and that's what seems to stop the maps from being seen properly)
I also made sure I had 'show hidden files' checked in the tools/folder options/view so I could see if they were hidden or not.
I then installed the nokia maps from my computer onto my phone via PC suite.
Open up your maps (it may take awhile cause it's starting a new directory structure on your memory card to replace the ones you deleted)... and allow it to connect to the internet briefly so you can get satellite coverage. (dont panic, you will still only see a green page, but if you zoom out you should at least now see your country etc)
Once you've done that, close and connect your phone to your computer using the "data transfer" and open up the map loader program and download your countries maps + voices you may want.
Once done, go back to your maps and you will find that all the streets will be showing once again!!
I hope this helps, it worked for me and I tried it on two different reformatted cards that weren't working before this.

Similar Messages

Drives mapped via GPO, NET USE shows mapping but doesn't show up in Explorer - Win 8.1

Fresh install of Windows Enterprise 8.1
Connected PC to domain, logged in, drive mapping worked as it should.
Rebooted a few times after installing software that I normally install on my computers (from the same sources/locally from my file server, etc). Rebooted a few more times all is well.
A few reboots later, the only drive that is mapped is X: which is my user drive done via the user profile in AD. The rest of the mappings that normally show up done by the GPO no longer show up.
After some digging, and noticing no errors in any logs I ran NET USE in a CMD prompt window, low and behold the drives are actually mapped and I can access them via the CLI without issue. I can navigate via their mapped drive letters, etc.
They just don't show up in Windows Explorer at all and I cannot navigate to the drive letters via the address bar. Strangely enough, it still kinda works since the Downloads start menu item is mapped to a network drive and that still works (Q:\) and
Chrome can access it as well if I try to download something.
I'm really not sure what else to check/try here.
Have other Windows 7 and Windows 8.1 machines (my laptop) and all works just fine, so it's only this specific install on my desktop that is showing this issue.

Hi,
There are several reasons causing the issue:
First, The problematic client doesn't reconnect to the target share at logon.
Please follow the steps to re-configure the mapped driver on the client and then check if the issue will re-occur.
Steps:
a. Open "My Computer"
b. Click on "Tools" and then select "Map Network Driver"
c. input the \\ipaddressofserver\sharename to give the path of the share
d. Check "Reconnect at logon"
e. Drive gets mapped
f. Double click on the drive to check.
Second, Antivirus software or Windows Firewall may block the mapped share.
If there is any Antivirus software and the Windows Firewall is enabled on the problematic client. If so, please disable them to check if the issue can be resolved.
Third, Fast Logon Optimization is enabled on the clients.
The fast logon feature may affect the display and drive letter assignment of a mapped network drive. As a result, the drive may have been mapped; however, the user on client cannot see it in Windows Explorer. He may recognize it as a failed network drive
mapping. This is the reason why we usually suggest you to disable fast logon on the clients via a GPO, and please check if the mapped network drive will be occur under this circumstance.
Please also configure the following group policy setting to disable Fast Logon Optimization to see if the issue still exists on the problematic clients.
Computer Configuration\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon
If we cannot get this issue fixed, please post back the event log related to this issue.
Kate Li
TechNet Community Support

NOKIA 530 Calendar entries don't show

Hi, Not sure what's going on. New Nokis 530 set up and synched yo Google calendar and entries transferred. I can set up a new entry any day until 16 August. After the, f shows for 2 seconds then dissappears. It doesn't matter if it's on my google or outlook account. Logging in on my Androis tablet calendar app or Google calendar on IE on my PC the entries show up immediately, but sren't on the phone. If I enter dates on my PC or Tablet after 16 August they won;t show up.
I've tried rebooting the phone, but can't see any settings as to why it won't show on the phone as it doesn't appear to be a synch problem. Any ideas?

Hi @thundertel ,
There is a 'window' for calendar entries, depending on calendar source and other factors. Windows Phone displays non-recurring events 2 weeks back and 6 months into the future from Google calendar, counting from the current date - old events disappear and new events appear when they are inside the time frame.
This is not configurable, unfortunately.
http://www.windowsphone.com/en-us/how-to/wp8/email-and-calendar/sync-my-calendars
Hans

Why google maps don't show street of russian cities?

I bought iPhone 4 in New York's Apple Store. Now, I live in Russia, and I can't use my Google maps, because it doesn't show street of my city! Please help me with this problem.

I am jimfromtoronto and I have solved my own problem with my girlfriends computer. Simply within the menu bar she had checked the option to NOT show images. Once unchecked the problems just went away. Sorry for any inconvenience. Jim

Ovi suite says I don't have maps installed on my 5...

This is a bit odd. I used Ovi Suite to upgrade my ovi maps to 3.03 a few weeks ago when I got the phone. I installed maps for a few US states as well. Yesterday I wanted to add maps for another state. Ovi tells me I don't have maps installed on my phone. Then it says it needs to upgrade Ovi suite so I do that. Then it says it wants to install ovi maps on my phone. Ok, fine. Turns out it's trying to install version 3.01 on my phone which of course I don't want to, assuming 3.03 is better than 3.01
So what gives here? It seems I can only install ovi maps using the Ovi Suite, right? I send an email to Nokia but perhaps someone here knows the answer.
Thanks,
Sander
Solved!
Go to Solution.

I've seen this happen a couple of times now.
As far as I can see, upgrading the phone firmware (in this case from v31 to v40), affects Ovi maps 3.03.
In chanchan05 's post Re: OVI map 3 not working, he quotes 5 installed files that make up the Ovi 3.03 application: Nokia Maps, Ovi Maps, and three Share Location files.
Upgrading the firmware to v40 appears to remove some of these, namely OVI Maps and the Share Location files, leaving only Nokia Maps.
The maps application still runs as v3.03 but with some of the functionality missing. Amongst others, the Maps menu screen shows only 9 icons, instead of the normal 10. "Share Location" is the missing one.
I guess the problem occurs because of some conflict between the v40 firmware (which I believe includes Maps v3.01, and any existing installation of the more recent v3.03.
That has the effect of prompting Nokia Ovi Suite (NOS) to attempt to 'upgrade' the Maps application. Unfortunately, instead of offering to reinstall the corrupted V3.03, it tries to downgrade the whole package to v3.01!!
I was fortunate and picked up that something was not right, so did not proceed with the installation. Instead I used the latest version from the Nokia site, which reinstalls v3.03 including the missing files:
http://www.nokia.co.uk/apps-and-services/ovi-maps/main
Nokia maps works properly and NOS no longer offers the wrong upgrade!
I thought I'd share this as others could end up wasting an enormous amount of time going round this loop (updating the map data each time takes hours!).
And I'd advise everyone who has updated their firmware to check they have 10 Maps icons and all 5 installation files!!

Google maps don't display right, part is good but about half of it says "we are sorry, but we don't have maps at this zoom level for this region." Zooming out doesn't help.

When displaying a Google map I get about four vertical strips that alternately display good and in gray bands. The gray area displays the message "we are sorry, but we don't have maps at this zoom level for this region." Zooming out doesn't get rid of the gray areas.
I've had this problem for over a year and get around it by using either MS Internet Explorer or Google Chrome which work Ok. Otherwise Firefox works fine and I use it for everything else except Google Maps.
I've tried an uninstall of FireFox and then reinstall but it didn't help. I don't remember what I was doing when this problem first showed up.

You're welcome

IPhoto Places map home button does not show all photo locations in one extent

I recently started populating location information for my photos in iPhoto 2011. Some are pre-loaded from my iPhone, but I also manually added locations for other photos/events. Now I have locations assigned both in the U.S. and in Europe, but when I try to view them all in one extent (via the "home" location button on the Places map), the map centers on Europe and I can't even see the U.S. Did I accidentally change a setting for the "home" location on the map? I cannot find a menu that shows options for the "home" location. Is it possible that locations are too far away from each other to see them all at once? If so, is there a way to reset the center of the map so I don't have to pan over from Europe every time I want to look at the U.S. locations (which is 99% of the time)?
Thanks in advance for the help.

I think I figured it out.
It appears that the iPhoto Places map centers on the extent with the greatest number of individually geo-tagged photos. Rather than centering the map to the area in the middle of all your locations (i.e. one location, one "point"), it actually prioritizes locations by how many individually tagged photos are at that location (i.e. one location, many potential "points").
Secondarily it may be a screen size issue. When I falsely tag a bunch of photos in Hawaii, then I can only see HI and mainland U.S. (no Asia or Europe).
I guess Apple assumes you'll want to see most where you have the most tagged photos. This is unfortunate, however, as I tend to tag overseas locations by the entire Event (many photos placed at one location) vs my domestic photos which may or may not have locations. I guess it'll even out over time, but still, it would be nice to be able to set a specific "home" location or viewing extent.

Blackberry maps does not show map just a location

Blackberry maps does not show map just a location on att with 10.0.10.822 os and software 10.0.10.116
http://forums.crackberry.com/blackberry-z10-f254/blackberry-maps-not-working-818297/
Solved!
Go to Solution.

Nope, I don't know the seekrit release dates
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Nokia Suite 3.6 clears pre installed map data from...

I had a problem with Nokia Suite clearing pre-installed maps from my new Pureview 808 and E5-00. The first time I let Nokia Suite 3.6 check for outdated maps, it reported that over 700MB worth of maps needed updating.
I didn't think much of the time taken but after maybe 5 minutes connection was lost and so were the preinstalled maps. Nokia Care didn't help as they said it was a PC or internet problem.
I also noticed in Nokia Suite 3.6 that the country Thaliand is missing from my installation of the suite for Pureview 808. However the country is there inside my phone's map loader. Thailand is present inside Nokia Suite when I connect my E5 to Nokia Suite 3.6.
Can anyone tell me what the pre installed maps in the phones are?

@wkl12mr
It depends upon the product code of the device as to which maps are pre-installed upon Mass memory of 808 as this determines localisation.
Presumably your 808 is running Nokia Maps v3.09_12wk09_b05 and if you use "Maploader" from within Nokia Maps application is not Thailand listed as per screenshot?
Happy to have helped forum with a Support Ratio = 42.5

Changes done in message mapping is not reflecting in output

Hi all,
i have created one scenario XML to XML and i before i had done 1 to 1 mapping, i got the output also.
but when i changed few calculation in the message mapping
there is one node "name" and "Description" in source and target in both places.
i am having name in SOURCE XML as "something" but i want to change this name to "Xsomething" and in description i have something in source but i want to pass constant value "ZSUBHODIP".i did mapping in message mapping, and when i did the testing in message mapping then in target in message mapping
i got "XCOPC_C03" and "ZSUBHODIP" but when it takes the XML file which is in my system then in output XML name value "XCOPC_C03" and description "ZSUBHODIP" is not coming.
i activated it too.
even i tried with the same FILE to FILE scenario also but in this scenario also problem is same like one one mapping only then when i changed it in message mapping then previous output is coming.
is there server problem, if yes then how to fix it??
please tell me what to do
thanks

Hi,
can you test it like this:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards,
Michal Krawczyk

6310i Nokia Inbox messages don't show sender numbe...

6310i Nokia Inbox messages don't show sender number, even though there are saved on the phone.
In the inbox, outbox, Archive folder. I can read the senders message but there number agaist the msg doesn't appear.
I check to see if the numbers has not been entered twice on my mobile. stranger.
I have backed uo and restored my phone recently using oxygen??
pls help.

I think oxygen may have stripped away the sender details.

Showing map on a jsp

Hi, i need to show a world map on a jsp with some of the cities shown as marked. Can anybody provide me any idea about how should i proceed?
i tried searching on net and found out that Google has their APIs for this purpose but for that user should always be connected to internet while surfing the site as the maps are loaded from google with the help of a key that they provide.
But i want something which can be put on the application server and works even when not connected to internet. Does sun jre provide any such thing like that?

If you have a single static image of the world, which will never change, then adding new markers for new cities wouldn't be that hard.
You could have:
1) the map image
2) a function that maps (latitude, longitude) pairs into (x,y) pixel positions on the image.
3) a data file listing city names and their latitude and longitude.
Then if you want to add a new city, all you'd have to do is add another record to the data file.
This is a significantly smaller problem than the sort of full-blown mapping that, say, Google does.

Can anyone help?? I have no map when I (show Map) just a white screen ?? elements 9

If anyone could help with my Question Please ??
When I ask to show map I just get a white screen ??

The mapping function used the Yahoo! Maps service, which Yahoo! discontinued, so PSE doesn't now support using maps.
Ken

Nokia N96 How do I know what maps are in the devic...

Dear all,
Use map loader to download some maps to my N96 then decided I wanted to download some more-how do I know which maps have been downloaded to my device to avoid duplication? Cant seem to be able to check!
Oh and how do I know where map loader is putting my maps on my device?
James
Message Edited by jpaul on 21-Oct-2008 10:26 AM
Solved!
Go to Solution.

21-Oct-2008 10:40 AM
jpaul wrote:
Thanks Mobile Guru,
So if I download a map of Ireland then a week later download a map pf France using map loader to my n96, both maps will be on the device.
But if I download Ireland then Ireland again a week later, it will overwrite with most up to date map-is that right?
Thanks for your help
James
Correct on your first point but if you download Ireland one week and then again a week later you might just be re-installing the same Map.
Map Loader doesn't say if and when Maps are updated.
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

IDVD 6: Menu buttons don't show up from iDVD 5 project

I have an iDVD 5 project that I opened in iDVD 6. It consists of 3 slideshows. (There was an issue with it not seeing the iPhoto 6 photos, but that's another issue I posted in the iPhoto forum.)
The buttons that show the slideshows do not show up in iDVD 6. But if I go to map view, the slideshows show up and I can go into them and see all the slides are there and I can preview them. (Well, when it doesn't crash.)
I tried creating new menus but those don't show up either (although, oddly enough, at one point I added a new menu and the title of one of the slideshows showed up!). This project had the Travel theme in iDVD 5.
So in summary: the menu buttons to start the slideshows don't show up when I open the project in iDVD 6. They also don't show up in the title (main) menu when I preview it in iDVD 6. I haven't yet tried actually burning a DVD.
Any suggestions?

The -34506 error. Welcome to a world of frustration and wasted evenings. There are plenty of threads here with suggestions on 'rules' for setting up your slideshows in iMovie, clearing caches, creating new users etc. These have fixed this particular error for some people.
Good luck!
Simon
## Oops! - I should have read your post more carefully the first time. Hey, at least you have a new number, even if it does provide as little real information as to what the source of the error is as the one I mention!
Message was edited by: Simon Dean

Nokia Maps 2.0 don't show maps on N95

Similar Messages

Maybe you are looking for