Nokia Maps not loading any new maps data on the fl...

Hi,
Just posted a thread on City lens not working properly with Maps, but now I notice that Maps seems to have problems of its own: without Wifi, I can't use satellite maps or indoors maps. As a matter of fact, even the plain vanilla street maps mode seems to work only because I've downloaded offline maps for my country. If try to zoom in on a neighbouring country without wifi, no detailed maps load.
Nokia Drive doesn't seem to have this limitation, it will happily load detailed maps data over the air too. Using Lumia 920, original firmware, and Maps version 3.1.177.8.
This can't be by design, or can it?

Some more interesting symptoms from this issue:
After restarting the phone, if I immediately launch Maps or City Lens, I can enjoy a short moment (maybe a minute or two) of having the features work over cellular data connection.
The non-functionality of these features seems to correlate with how the Dialer tile on the start screen identifies my network (only medium-size or large tile will show the name). If the tile reads "Saunalahti" (the name of my operator), everything will work as it should. Some minutes after booting the id changes to "Oma verkko" (="Own network"), at which point cellular connection seems to stop working, but only for these very specific use cases. I can happily use IE10 or other apps which require data connection even with WiFi off.
If I go to Settings / Network and choose my network manually from the list (i.e. I choose "Saunalahti"), the Dialer tile will for a short while again revert to showing "Saunalahti", and I get another 2 minutes of functionality.
So yes, I guess it does look like a network issue, or perhaps an issue with how the device deals with roaming networks. My network provider told me it's probably something with the phone or its settings and suggested I contact Nokia. Nokia will probably tell me it's obviously something with the operator and direct me to them .

Similar Messages

  • I have an estimated ship date of 10/14/2014, for 2 iphone 6 16GB in Silver.  Like others I have not received any new details since receiving the order confirmation.  Can anyone tell me if my order will ship tomorrow?

    I have an estimated ship date of 10/14/2014, for 2 iphone 6(not the plus) 16GB in Silver.  Like others I have not received any new details since receiving the order confirmation.  Can anyone tell me if my order will ship tomorrow?

    I dont mean to rude. but I have seen the same response to others over the past month.  I have been keeping up w/ check status from the link provided in my order confirmation.  At this point your depts management should be demanding more detailed info on order status.  They have you customer service folks answering these question blindly, wasting your time and mine and ultimately costing verizon money which they will pass along to me and the other millions of customers out there.  If you cannot give me a more detailed answer please escalate this to someone who can.  Thank you. 

  • Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Thank you for your response.
    I had rebooted the router (several times, actually), to no avail.
    I do not know the answer to whether MAC filtering is enabled on the router.  Have tried to find info about that, but unsuccessfully.  Router is an Arris TG852G, supplied by Comcast.  I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist.  To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages.  He was unable to connect my iPhone, however, after trying for some time.
    I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g".  The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
    By the way, my iPhone does connect wirelessly to my network at home.  This difficulty is at a second home.
    Any other thoughts would be appreciated.

  • MAIL on my MAC does not load any new mail or delete any mail in any of my other folders

    I've been having this problem for a couple of days now. Its as if MAIL just doesn't respond to anything. I can't get any New MAIL to load. And if i try to delete anything from SPAM, JUNK... and so on. They won't delete, they just show up again after deleting.
    I restarted the computer, and checked all my settings as well. I also uodated the computer.
    MAIL works from my iphone ans ipad. Just not MACBOOK PRO.
    Any help is appreciated.
    Jimmy

    Drafts, ToDos (Notes), and Outbox are found normally in the Mailboxes folder but do not usually appear in the On My Mac section. As for Deleted Messages that may be a remnant from before you used an IMAP account or if you at one time configured Mailbox Behaviors in Mail preferences to keep deleted messages locally instead of on the IMAP server.

  • Firefox will open but not load any new tabs or windows after a set amount of time.

    After about a day of my computer running, Firefox will stop being able to browse the web at all. Any attempt to open a new window, tab, or refresh an old tab will result in the program not doing anything, or opening a new window/tab with (Untitled) in it. The window cannot be navigated away from this, and will not refresh. Closing Firefox does not solve the problem, nor does ending the process. The only way to restore Firefox's functionality is to restart my machine.

    hello spitcher, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
    in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Firefox will not load any new add-ons

    When I try to add add-ons, firefox says "connecting" and runs and runs and runs and never adds the add-ons

    If you aren't able to connect in Firefox, but can connect with other programs, the most common cause is a firewall. See [[Firewalls]] for instructions on configuring firewalls. (Make sure you configure all firewalls that are installed)
    Another possibility is that you are in offline mode. Make sure "Work offline" in the File menu is ''unchecked''.
    For other causes, see [[Error loading web sites]]

  • Where are all my bookmarks? I have done all the checks in the FAQs. still no bookmars and I can not add any new ones to replace the lost ones either

    After number two daughter "played with" this 'puter. I have lost all my long and well established bookmarksl The bookmark tab no longer displays a dropdown list of the web addresses trhat it always has done in the past. just a useless blank page with meaningles divisions.
    I have tried to reinstall the bookmark by importing them from a previous HTML file and I have tried restoring them from a JSON file, both of which are up to date as of this morning.
    Nor can I rebuild the data because I can no longer add any bookmarks
    I have even uninstalled and reinstalled the latest version of Firefox. Still nothing. If this is a result of an automatic upgrade, the words "chocolate teapot" spring to mind.
    If this is the work of number two daughter, then it is no Father Christmas this year unless you can restore my missing bookmarks to their previous glory, and quickly.
    (The bookmarks are still in the HTML file and I could use them at a pinch. But why should I have to swop between two programmes when up until now they have worked perfectly?)

    Progress report - Curiouser and curiouser! I reloaded Firefox having completely cleared out previous(uninstalled and cleared our all registry references)
    After reload I put the bookmarks HTML file in the Mozzilla folder and ran Firefox. After five or six seconds, it sprang into life complete with all the old bookmarks in place and all useable. I have since tried to add one more and now they have all vanished again!!!!!!!
    So far I have followed all the suggestions in the Mozzilla "do this to repair the problem" pages on the web. Uninstalled and reinstalled three times, run various 'repair' programmes including the ones directly dowloaded from the Mozzilla website. Used the 'go back to previous saved data' option and reloadedm the data from a previously saved HTML programme. Done all this more than once, only to be back where I started with no bookmarks, and no SQLITE file nor folder found on any hard drive.
    The 'puter is sitting behind a hard wired firewall (old computer acting as firewall) plus a good anti virus and firewall software programme running as well. I don't think I've been hacked but I am beginning to wonder. Twice is coincidence, more than three time sounds more like enemy action!
    Strange that everything worked following the last reinstall, only to vanish again when I tried to add one more bookmark

  • I started making a movie in the new imovie '10.  I opened up the project and can not record any new audio.  All the recorded audio and music isn't playing.  I can't figure out what's going on, I teach a flipped classroom and need to get these videos done!

    I am not sure what is going on, but I need help ASAP! 

    soon as you start up the computer, keep hitting the F1 key.  That should get you into the BIOS.
    Also, try disabling Active System Protection for your freezing issues.  I'm using XP so  I don't know where to tell you to find it in Vista.

  • Open topics by double-clicking them in the DITA map - not working any more?

    Hi all,
    I just noticed when I double-click a topicref in a DITA map in FM12 then the referenced topic does not open any more. I checked the problem with several maps. Is this a bug/feature or do I need to activate this function somewhere in the options?
    Robert

    Hi Robert...
    When you say that you need "variations" from the normal topic type .. are those structural variations or just formatting? FM associates structure apps with XML files based on the doctype (root element). If your files all have the same root element, then they will all open with the same structure application (unless you specify a different one when opening the file or by importing a new EDD). It sounds like you really should be creating a specialization for each alternate topic type. If you don't, you'll end up getting the wrong "model" assigned to the wrong file.
    Multiple EDDs (structure apps) can share the same DTD, and one EDD (structure app) can support multiple models. This is how the "ditabase" app works. There are lots of ways to set this up, but I think what you've done is probably not quite right.
    The default structure app setup in FM11 and FM12 is very complicated to work with. I recommend creating a single app that supports many models. This isn't always possible, but it sounds like in your case it should be. I've set up one app that supports 13 different specialized topic models and it works fine.
    Note that even though you've added structure apps for each model, if you end up opening the files using the default template, you are no longer using those modified models.
    Sorry, but this is a bit more than can be dealt with appropriately in a forum post. If you'd like more help with this, feel free to contact me off list.
    Cheers,
    …scott
    Scott Prentice
    Leximation, Inc.
    www.leximation.com

  • Blackberry map not loading!

    Hi all!
    BB maps not loading on my Z10. I wish to download official google map not developed by third party. It may be developed by either RIM or google for BB. Suggest me good one please
    By
    R Jagadeesan

    Bemaps 10 Pro
    Twitter: @ukmight
    1. Click on the " Like " button if you find anything helpful posted.
    2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

  • The new version of Firefox, 18.02, will not load any pages. Why not?

    I attempted to open Firefox and was told it would load when the updates were applied, which was nothing new. It loaded fine and there were no incompatible add-ons, but it will not load any web pages. I'm on the same computer using Chrome to send this message. Everything was working fine in release 18.01.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

    Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

    Sign out of the iCloud control panel and then back in.

  • Safari cannot open the page because it could not load any data

    I had a odd thing happen with Safari today I get a "Safari cannot open the page because it could not load any data" msg when going to a saved site with a book mark but I can get the page to load by going to google.  It dosn't happen for the same site every time  Mosty Fanfiction.net.  Happens on Nework and on cellular.   Sites work on my Ipad but not my Iphone 6  

    Thanks a lot for the tip! I wrote to the NYTimes webmaster but did not get a reply. However, the next day my problem was solved and I could access all content as I did previously. Either a coincidence or...? I'll take it either way and thanks again!

  • I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version whichi understand is unsafe...what to do?

    # Question
    I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version which i understand is unsafe...what to do?

    That was probably caused by your Firewall blocking the newly installed version of Firefox.
    No known security issues with Firefox 3.6.17, which was just released this past week.

  • Error safari could not open page because it could not load any data

    safari could not open page because it could not load any data???? Whats the problem. I am trying to get on my works benefits page to change 401k investments.

    Since the latest 'update' on Dec 13th, I can't access Safari at all. A page of gobbledegook comes up.

Maybe you are looking for