Nokia maps updated and after a soft reset..

After I installed the nokia maps suite update, I decided to do a soft reset on my n8. I'm always using nokia pc suite to install apps, maps, voice files and software updates. But now, I can't update my maps via nokia suite. I'm using the latest stable nokia suite (not beta) I also tried to restore but it's a no go.

What's the error it's giving when you try to update the maps? I assume it's just the regional map data you're trying to get, and the app is on your phone OK.
Have you run the maps application on your phone? On first start it has to create some directories, only after it's done this can you install maps and languages.
Also might be worth trying the latest beta from here if you're still having issues: http://betalabs.nokia.com/apps/nokia-maps-suite it does say one of the fixes is a maploader download issue.... this may be exactly what you need!
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

Similar Messages

  • Nokia Maps Update and Maploader v1.2 released

    Hi all
    At long last and as expected released today available from:
    http://europe.nokia.com/A4509291
    Happy to have helped forum in a small way with a Support Ratio = 37.0

    Worked it out. Uninstall the existing application, restart the phone, install the new (N73) version then restart the phone. All the maps are gone and it starts a map update (data connection). You need to wait for it to dowload the maps before you try anything or it crashes.
    I guess you could start the application, say no to update, close the application, use Map Loader (if you can get through a proxy) to download your maps and the start the application again.
    BTW, it does retain any landmarks you had saved.
    N95 8GB (v20)

  • N82 Nokia Maps update fail

    Hi, 
    I have a problem with my phone. The phone was turned off by mistake during Nokia Maps update. Nokia Maps do not work at all now. When i push button "Maps", I don't get any reaction. Nothing happens. Could you please give me a piece of advice, how i can to reinstall Nokia Maps or something else? I was trying Nokia Maps Loader, but it did not help me...
    Solved!
    Go to Solution.

    Try reinstalling it using the same procedure you used whe updating. If this works fine but if it doesn't then you have to reinstall the previous version and then try updating again.
    Because Nokia Maps is embeded in the firmware, to reinstall the original Nokia Maps version, you have to reinstall the firmware. To do this, you have to use the *#7370# reformat phone code. Before reformatting you need to backup all data in your phone because your phone will be wiped. 
    After reinstalling the firmware, you will find that you are back to the previous version of Nokia Maps. Now try updating again. After you successfully update, delete the "Cities" folder on the memory card, use Nokia Maps at least once. Now finally you can use Map Loader to download latest maps.

  • Nokia maps update in c7

    STILL I DIDNT recieve nokia map update for my C7.i AM USING v3.06
    ENDRUM NATPUDAN

    Just Try poet reset. Dial *#7870# and press call.Enter 12345 if security code required. Phone will restart, your settings will restore to original. Mail boxes if any will be deleted. You will need to set your ringtones and other settings. Your apps and files WILL NOT be deleted. Now check software update menu. Most probably you should receive the update. Else you will be forced to hard reset and if you proceed to hard reset, make sure you back up your data.
    In Love With My C6-01:Now running on Nokia Belle!

  • Error during Map Update via Nokia Maps Updater on ...

    hi,
    im trying to update maps on my n96. but i get an error message. here are my details:
    "Cannot get enough information about the phone [3]
    unspecified error(1)."
    PC: Windows 7 Professional 32 bit
    PC Suite 7.1.40.6
    N96: SW 30.033, 30.033.098.1, 18-06-09, RM-247
    N96: Maps version installed: v3.01 09wk26b02, Map version 0.1.22.103 OpenBitLM 6.2.1.4
    Setup Nokia Maps Updater 1.0.12.exe
    Is there any workaround for n96? I tried to download an install nokia_maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis file from a link in another thread about similar issue with n95, but it will not install on n96.
    any tips will be greatly appreciated.
    - chr

    In a similar thread I found this post by Ovikovi:
    "For those having trouble installing the Nokia Ovi Maps application itself. 
    I currently have links for 4 versions of the Nokia Ovi Maps application. These files need to be stored on your memory card on your phone (usually you would connect your phone to the computer in Mass Storage mode and pop the files on the card, then disconnect and install the application on your phone).
    After installation, run the application once, then exit. Now you can install your maps.
    Previously I only had links to three separate versions of the OVI maps application here. Maybe the extra one will help some of you.
    Symbian is an operating system used on nearly all Nokia smartphones. Which version of the Ovi Maps application you need for your phone depends on which version of Symbian you are running on your phone.
    Here they are:
    Ovi Maps 3.01
    (for non-touchscreen devices such as the E63 and similar running the same version of the operating system (Symbian S60 version 3 Feature Pack 1) without free turn-by-turn voice guidance [program requests license when making a route])
    http://static.s2g.gate5.de/nokiamaps-client/nokia_ maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis
    Ovi Maps 3.03
    (for non-touchscreen phones fully supported with free turn-by-turn voice navigation)
    http://nds1.nokia.com/PRODUCT_METADATA_0/Explore_S ervices/Ovi_Maps/nokia_maps_3.03_10wk11_b04_s60_3...
    Ovi Maps 3.03
    As above (fully supported with free turn-by-turn voice navigation) on selected phones but for slightly newer version of the Symbian operating system (S60 version 3, Feature Pack 2)
    http://nds1.nokia.com/PRODUCT_METADATA_0/Explore_S ervices/Ovi_Maps/maps_installer_3.03_10wk1_b05_s6...
    I tried all 3 versions of the sis install file, but none of them will install on my n96.
    Now what?

  • Nokia Maps Update Information

    Hi All,
    On the Nokia Maps FAQ it states the following regarding updates:
    1.11 How often is the map data in Nokia Maps updated?
    The map data will be updated twice a year. You can check for map updates in the Nokia Maps application through Options > Settings > Network > Options > Check for map Updates.
    On my E65 I don't appear to have this option to check for updates.
    Can someone let me know how to check which map version I have and how to find out when new maps are available.
    Cheers,
    co

    Hi chrowe
    Whilst Nokia Maps is running goto Options > About to check what version you have.
    Provided that a "network connection" is available I believe that the "Check for Map Updates only appears if application detects disparity between stored maps and those currently available, but I might be wrong on this.
    Message Edited by scoobyman on 01-Feb-2008 02:05 PM
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia Maps Updater Download Button inactive

    Nokia E71x. 8gb micro card installed. Nokia Maps updater V1.0.8. Windows XP pro SP3.
    Program launches. Recognizes Phone. When "checking for updates" the "cancel" button is active. When 5.33 MB update page splashes neither the cancel or download button are active.
    I have roamed the forum and tried the following suggestions
    a. Use Tab key to navigate - doesn't work
    b. change font size on page - doesn't work
    c, launch program at 640x800 resolution-doesn't work
    d. launch program in Win 2000 compatibility mode - doesn't work
    Are there any other suggestions? Can I manually update the maps. Can I get the phone to update the maps on a wifi connection?
    Any help appreciated.
    Howard

    Hi,
    I wanted to let you know that we do have an update for the application to correct this issue and it will be available in the near future. In the meantime you can get around this issue by doing as posted in this thread or by navigating with the "Tab" key to either the Cancel or Download button, confirming your selection with the "Space" key.
    I would like to apologise for the inconvenience caused, and thank you for your feedback - as i have said before, Keep it coming!
    Thanks
    Chris
    Although i work for Nokia, my opinions are my own!
    Got a Maps query? Check our Maps FAQ's

  • I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

    I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??

    Hello,
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Classic/OS9 Apps no longer supported.
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
    There are workarounds if the 867MHz CPU is the only hangup...
    http://sourceforge.net/projects/leopardassist/
    http://lowendmac.com/osx/leopard/unsupported.html
    So we know more about it...
    At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: eMac
    Model Identifier: PowerMac6,4
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.2f1

  • HT201210 what is unknown error(1) !!! it appears every time i tried to update and install iphone soft ware!!! Further, that error appears once the firmware installation is in process !!!

    what is unknown error(1) !!! it appears every time i tried to update and install iphone soft ware!!! Further, that error appears once the firmware installation is in process !!!

    Usually occurs on devices that have either been jailbroken or attempts have been made to downgrade the iOS.  You can try putting it in DFU mode to restore but you may not be able to fix it.  If you phone has been jailbroken we can't support you in these forums as it is against the terms of use.

  • I have I phone 4s. I made update and after that the WI-FI is not starting. Can somebody tell me what to do? Thank you

    I have I phone 4s. I made update and after that the WI-FI is not starting. Can somebody tell me what to do? Thank you

    I have the exact problem on my 4s immediately after updating to 6.1.2. Not able to enable the phone wifi at all! Can anyone please help?

  • Before update and after Update trigger

    Hi,
    I am following the below approach to overcome ORA-04091: table XXXX is mutating error.
    1. In the after update row level trigger i am capturing rowids of changed rows into a table type (of type rowid) defined in a package.
    2. In the after update statement level trigger i am using the data from the table type ( that got populated in the first step) to do my work.
    3. In the before update statement level trigger i am resetting the table type defined in the package.
    Now, can the below situation occur causing the system to fail
    1. A Update to the table occurred causing the before update statement level trigger to fire and reset the table type.
    2. After that row level after update trigger gets executed and captures the required data.
    3. Now before the after update statement level trigger gets executed a new update to the table happened ( to some other row as multiple users are using the application) causing the
    before update statement level to fire and erase the data from the table type?
    I want to know if above situation can occur or is the execution or before and after update triggers atomic?
    Thanks for helping.
    TIA
    Harsha

    A collection in a package is local to the session. And a given session can be processing one SQL statement at a time. So any concurrent updates would be happening in a different session with a different logical collection.
    You may encounter problems if your session is trying to update the same rows that other sessions are trying to update (whether via the original update statement or via the updates issued by the trigger). You could encounter performance problems because of row level locks or you could encounter deadlocks. But your session's collection won't be initialized by some other session's actions (other than DDL that replaced the package itself).
    Justin

  • My iphone 4 stopped recognizing when it is plugged in to charge. I have to let it completely die and do a soft reset for it to charge and start back up. Any suggestions on how to fix this?

    My iPhone 4 stopped recognizing when it is plugged in to charge. It has to completely die and a soft reset has to be done to it before it will charge and start back up running. A tech at a store said it was just a short in the phone and nothing could be done to fix it, but I'm sure there has to be other options. Any suggestions?

    To rule out a software issue or damaged data inside the backup, set it up as new device without using the latest backup afterwards.
    If the phone is back to normal after that, restore from the backup again.
    How to back up your data and set up as a new device

  • Just tried to do a software update and after restarting, it won't go last the grey screen. Also HTML is showing up that says "unable to find duvet for this platform". No idea what to do help.

    So I hadn't updated my software in many many months... I decided to so I could download games... And after my computer restated and had updated, it went to a grey screen with HTML coding. At the top it says "unable to find driver for this platform". No idea what to do please help!

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Nokia 2700 update and lifetools problem

    I had recently updated my nokia 2700 classic to firmware v9.8 Then there were 2 lifetools icons displayed on the phone . Also power and screensaver option were removed . What is the solution ? How can i format my phone ? how can i restore as it was earlier ? No pranks please reply to this only if u'r dam 100% sure. :-):-):-):-):-C

    Even i had the same problem when i've treated phone software to 9.80 using mobile gprs,there were two icons and my music player has become very slow,so i went to nokia care for reformating,the problem of two icons is solved.But music player is still slow even after update of 9.95. So goto care to solve the two icon problem.Please tell me if your having slow music player problem now and after going to care. :-)
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • Nokia Maps Upgrade and Traffic Alerts

    My Nokia maps has started unexpectedly trying to pursuade me to upgrade , when in fact it seems it really might mean I think pay and re-authenticate. I think the software runs really well on my E71 but will not pay another £70 to keep using it. I might if it was an well needed upgrade,but what I have is great.
    But what really irritates me is that a month or two back the system talked me into taking a years entitlement to traffic alerts which are somewhat dumb
    ( it doesn't take cogniscence of where you are being guided to other than in the list order, the alerts are out of date like all alerts in the UK radio/internet/road signs etc. and it doesn't even have the intelligence to realise that you are going north etc. when if gives you a pointless southbound alerts )
    but what really irkes is they took a years worth of money for alerts on a software package with a month or two's lifetime. I would be happy to continue using the current version and not pay for the upgrade. Any solutions out there to continue using the present version and not take the upgrade ? ora route to take to get a refund on the alerts ?

    Nokia do things the opposite way around to most sat-nav providers, instead of charging upfront for the software and updates, the software (which can be used for things other than sat-nav as radical says) is free and you buy a licence for sat-nav use to fund continuing development of the software.
    Your phone came with a free trial - all GPD-equipped Nokias now have 3, 6 or 12 month free trials in most markets (the period depends on the model - 12 months for high-end phones like the N96,6 for Navigator-branded models like the 6210 and 3 for most others). I changed to Nokia Maps from the Windows-Mobile software "Destinator" because updates were getting hard to find. Nokia does at least keep its software up to date, and it is fast becoming a great package.
    As for the traffic updates, these are dependent on the source information, and these services are still pretty much in their infancy because few people use them at present. The Nokia Maps application relays to you the information that it receives from third parties. As for your contention that it took a year's money for a short-life package, this is down to you. Why did you accept a year's subscription to traffic updates if you were not certain you would renew the navigation licence? It was your decision.

Maybe you are looking for

  • Error when making a call to SAP using SaveData

    Hi, Iam getting the following error while making a function call to SAP T:5392 *>RfcInstallStrucure2: field 1 (SIZE_DIM, t:0, l:1) offset 16 too small Can somebody please explain me what's going wrong. Thanks & Regards, Sudha

  • Running SAP on Microsoft Virtual Servers

    Is anyone running SAP on Microsoft Virtual Servers?  If so, what has been your experience with this?  We are installing NetWeaver 2004s on three virtual servers (running on the same Physical Windows server). We are using the Microsoft Virtual Server

  • T430s w port replicator and monitor question

    Runs fine and please with it. Is it possible to close the T430s and still use it? What do I need to do to run the desk monitor and close the T430s? Seems I should be able to do so.  Thanks for your help and time. klm

  • Rollback VO extention .. rollback JPX file and Personalization

    I have applied the Patch for VO extension.. and Personalization link is disbale. Due to some error on server .. I want to manually remove the files from file system. can anybody do let me know the step please. thank you

  • JCI Payroll Integration

    Has anybody created ingoing and outbound interfaces between HRMS and JCI? If so, how can I get hold of the code? Hans