Nokia Messagging and scribble updates only avialab...

I've have and 5230 rm-588 hispania black-black with the latest firmware (50.0.001), and when I look for updates via phone itself their show me that are updates avialable for messaging and scribble, but if I look for updates in OVI Suite they says that isn't any update avialable.

yes...i also got a update
Main menu, new web browser, ovi store, ovi music - all has got kinetic scrolling.
Now you won't get low memory errors because web browser has greately improved. These is no tabbed browsing until you click on a pop-up link but the kinetic scrolling is now good and the full screen mode is good, now you get a information bar when load any new page which is very helpful. It goes away when the loading is done. It goes to full screen every 3-4 seconds you leave it alone.
Flash player has improved(for .flv files) now you can fw or rev videos.
Still there are some problems like when you go to settings>themes>homescreen and select your theme as contacts bar and then you deselect contacts bar (the one present in the home screen option) , the contacts bar is still present at the home screen. But if you again select it, it'll get disappeared from the home screen.
Still the phone hangs but now it gets normal after you leave it for 20-25 seconds. Now you dont need to remove the battery to restart.
The viruses I observed before the update were not working which is really good.

Similar Messages

HT1338 When trying to update my software, I get "an error occurred" message, and the update gets cancelled. How do I fix it?

When trying to update my software, I get "an error occurred" message, and the update gets cancelled. How can I fix this?

I have found other threads with this problem. The problem is that you are using your iTunes account on another user at the same time you want to update software. Just close iTunes from that user. See > https://discussions.apple.com/thread/4577180?start=0&tstart=0

I have my email set at 1000 messages and it is only holding messages from the last four days, any ideas

I have my email set at 1000 messages and it is only holding messages from the last four days, any ideas

With an exchange account, it's "Mail Days to Sync":
http://support.apple.com/kb/HT2723

Snow leopard server for net boot and software updates only what needs to be running to use it?

Snow leopard server for net boot and software updates only what needs to be running to have it work right?

Netboot and Software Update, at its simplest. Mac OS X Server also expects to have functional IP networking and DNS services (somewhere) on the LAN (and if you're behind a NAT gateway, then the DNS server(s) are on your LAN and not out at your ISP), or things get weird. SUS (usually) works out of the box, outside of cases where there's an outbound firewall. Netboot can be more effort to setup, in terms of what you're loading into the clients.

Corellated update AND merge(update only)

Hi ,
I have few corellated updates in my code , which i though ,i can replace with 10g new Merge update only stmt.
But to my surprise , the sql using merge is showing more cost and using full table scan.
Please find below the sql stmts. below(example). Am using Oracle 10.2.0.1
create table t1 as select * from all_objects where rownum<10000;
create table t2 as select * from t1 where rownum<10000-200;
create unique index t1_objId_ind on t1(object_id);
create unique index t2_objId_ind on t2(object_id);
--Corellated updated query
update t1 set t1.object_name= (select upper(t2.object_name) from t2 where t1.object_id=t2.object_id)
where T1.OBJECT_ID IN (SELECT t2.object_id from t2);Explan for above update stmt.
| Id | Operation                    | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT             |              | 9139 |   383K|    37   (9)| 00:00:01 |
|   1 | UPDATE                      | T1           |       |       |            |          |
|   2 |   NESTED LOOPS               |              | 9139 |   383K|    37   (9)| 00:00:01 |
|   3 |    TABLE ACCESS FULL         | T1           | 9138 |   267K|    35   (3)| 00:00:01 |
|* 4 |    INDEX UNIQUE SCAN         | T2_OBJID_IND |     1 |    13 |     0   (0)| 00:00:01 |
|   5 |   TABLE ACCESS BY INDEX ROWID| T2           |     1 |    30 |     2   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 6 |    INDEX UNIQUE SCAN         | T2_OBJID_IND |     1 |       |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   4 - access("T1"."OBJECT_ID"="T2"."OBJECT_ID")
   6 - access("T2"."OBJECT_ID"=:B1)I wanted to eliminate the corellated update , So i wrote using MERGE as below
MERGE INTO T2
USING T1
ON (t1.object_id=t2.object_id)
WHEN MATCHED THEN update
SET T2.OBJECT_NAME=UPPER(T1.OBJECT_NAME);Explan for above MERGE stmt.
| Id | Operation            | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | MERGE STATEMENT      |      | 9139 |   303K|       |   201    (2)| 00:00:03 |
|   1 | MERGE               | T2   |       |       |       |            |          |
|   2 |   VIEW               |      |       |       |       |            |          |
|* 3 |    HASH JOIN         |      | 9139 | 2391K| 1256K|   201   (2)| 00:00:03 |
|   4 |     TABLE ACCESS FULL| T1   | 9138 | 1142K|       |    35   (3)| 00:00:01 |
|   5 |     TABLE ACCESS FULL| T2   | 9671 | 1322K|       |    34   (3)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   3 - access("T1"."OBJECT_ID"="T2"."OBJECT_ID")Cost is 201 , but for the corellated update the cost is 37.
Any idea , how should i re-write the MERGE stmt.?
Edited by: kumar on Jun 16, 2011 4:41 PM

First "cost" is just a number and you should not compare or tune to get the best "cost" in an execution plan.
What counts ist elapsed time => IO, CPU...
In 11g the "cost" for the merge is better (and also the CPU time is far off to be close to the truth!)
9799 rows updated
78ms elapsed
Plan hash value: 580992724
| Id | Operation                    | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT             |              | 9641 |   404K| 28964 (34)| 00:05:48 |
|   1 | UPDATE                      | T1           |       |       |            |          |
|   2 |   NESTED LOOPS               |              | 9641 |   404K|    41   (3)| 00:00:01 |
|   3 |    TABLE ACCESS FULL         | T1           | 10866 |   318K|    40   (0)| 00:00:01 |
|* 4 |    INDEX UNIQUE SCAN         | T2_OBJID_IND |     1 |    13 |     0   (0)| 00:00:01 |
|   5 |   TABLE ACCESS BY INDEX ROWID| T2           |     1 |    30 |     2   (0)| 00:00:01 |
|* 6 |    INDEX UNIQUE SCAN         | T2_OBJID_IND |     1 |       |     1   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   4 - access("T1"."OBJECT_ID"="T2"."OBJECT_ID")
   6 - access("T2"."OBJECT_ID"=:B1)
Note
   - dynamic sampling used for this statement (level=2)
commited
16ms elapsed
9799 rows merged
125ms elapsed
Plan hash value: 2009158753
| Id | Operation            | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | MERGE STATEMENT      |      | 9641 |   320K|       |   251   (1)| 00:00:04 |
|   1 | MERGE               | T2   |       |       |       |            |          |
|   2 |   VIEW               |      |       |       |       |            |          |
|* 3 |    HASH JOIN         |      | 9641 | 3088K| 1720K|   251   (1)| 00:00:04 |
|   4 |     TABLE ACCESS FULL| T2   | 9640 | 1600K|       |    39   (0)| 00:00:01 |
|   5 |     TABLE ACCESS FULL| T1   | 10866 | 1676K|       |    40   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   3 - access("T1"."OBJECT_ID"="T2"."OBJECT_ID")
Note
   - dynamic sampling used for this statement (level=2)In your example, the elapsed time (thanks for the it!) is 78ms for the update and 125ms for the MERGE. (ORACLE 11g on and old PC) .
So "should you rewrite" the MERGE? No idea how. I assume you want to change from UPDATE to MERGE and see if it's worth?
Here it's not. But, your example just uses 2MB of data. And the difference from my point view is not MERGE or UPDATE it's NL against HASH join with that tiny amount of data.
So generally I use MERGE because of speed and because I have more control over the query. For updating 2MB of data, it's not worth it. For updating GBytes the stuff I worked on it was faster (and better to control).

Annoying update messages and forced updates

Dear Skype,
I have been using your application for more than a decade now, and today I decided to untick the box "Start Skype at computer startup". I don't delete skype for now, but I am close to permanently remove it.
I have had it with your annoying forced updates.
So long

Hi, Kormendi_adam.
I'm sorry to see your intent to leave Skype.
Skype dynamically updates to better the Skype network and some updates include a major change that require you to update. This could be anything from a major compatibility change or even a critical bug patch. 9 out of 10, the intent of the Skype development team isn't to push out a new flashy design to be forced into your acceptance, but rather to make improvements that the majority of the userbase would benefit from.
That's not to say that you will and must enjoy it. That's why we have the Skype community. I'm glad you put your opinion out there. I'm really sorry that you cannot use an older version of the Skype client. I do hope that you will take the time to learn, use and enjoy the latest version of Skype. It has made great strides over time and has become quite the choice in Internet communications and it would be greatly missing a piece if you left.
And please, if you have any question about Skype or have any bright ideas, please don't hesitate to post them on the Skype community. We're here to help!
P.S.: Did you disable Automatic Updates as an Administrator? You mentioned before that you disabled startup upon login only.
I.T. Professional
Virtualisation Solutions (VCA-DCV - VMware)
Donating time to help you here with your Skype needs.
If I've answered your question, feel free to "Kudo" me!

N900, Nokia Messaging and gmail

Hey,
I have an N900, and I ahve set it up to get email with Nokia messaging.
I don't have a gmail account, but I use gmail for my domain.
The thing is, that I recieve emails ok - no problems at all.
And I can send emails, no errors - except that they never arrive....
Any ideas?
Henrik

Got same problem with the syncing Inbox folder @ gmail, other folders sync fine. No errors in sync log.
Reinstall, remove-add gmail account on messaging website doesn't fix the issue. Google Gmail app works and fetches everything.
Phone: E71
App: Nokia Messaging email build: 9.6.0.24
Maybe this is somehow connected with: http://gmailblog.blogspot.com/2010/01/default-https-access-for-gmail.html ?
Please advice!
Message Edited by ant0xaxa on 20-Jan-2010 02:30 PM

NOKIA SUITE AND OVIMAPS UPDATES

Hi,
I just want to know if NOKIA Will still update Nokia Suite and Ovimaps for Symbian(I use Nokia c5 03)
I thank you a lottttt Luckybambou

As your C5-03 can run Nokia Maps v3.06 and uses same map data currently 00.02.49.104 as the last Symbian 808PV device made, hopefully further updates maybe forthcoming. There have to be doubts however over any further development of Nokia Suite as no Asha devices released in 2013 have PC connectivity.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Facebook notifications and messages and account settings only work in private browsing

Unable to open Facebook notifications, messages and account settings unless running in private browsing

This can be a problem with cookies.
"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See http://kb.mozillazine.org/Clearing_the_cache and http://kb.mozillazine.org/Cookies

Ipod keeps telling me this message and lighting connector only charges ONE way

So my iPod touch 5th gen KEEPS telling me this message and it's even when I don't have anything plugged ! And yess I've done everything possible restart etc. , my lighting connector is a Official apple product so I don't get why it's saying that ? Please help . My apple care expired and I REFUSE to pay 150 for a repair and this is my 2nd replacement. It's been messing up so much lately

I suspect either a bad cable, foreign material in the connector or a damaged connector in the iPod.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable. Yes, try another cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT4623 I have an apple 3gs Iphone and in the middle of a restore settings it came up with an error message and i have only the dark screen with the apple sign on it. I am unable to turn off or complete the update what can i do ?

In he middle fo a restore i got a message re the battery and i am unable to get mu i phone back on as i have a dark screen with the apple sign on it I am unable to turn off or charge Help!!!

http://support.apple.com/kb/HT1808

When I try to instal latest version of iTunes onto my computer I get error messages, and then the only way for me to access iTunes is to do a System Restore to and earlier restore point

When I try to install the latest version of iTunes, during the installation I get error messages saying that a program is trying to change registry and the installation is stopped.
After this happens the only way that I can open iTunes is to do a 'system restore' to an earlier time.
Has anyone else experienced this and can you help?

Could you please post the exact text of the error message or provide a screenshot?
There is advice on issues with the update at Troubleshooting issues with iTunes for Windows updates. One of the entries in the further information section refers to a possible registry permissions problem which might be what you are seeing.
tt2

Support message and change requests only for production system

Hi guys,
I would like to connect the solman helpesk with CHARM ( CHARM is still running ).
In CHARM I have to create a CR only for production system. ( don't know why - but works as designed).
In SAP helpdesk I can create support messages for every kind of system type but if I want to connect both (HD and CR) , the source system (ibase component) of the issue will copied to the CR and runs in error because of the rule (only p-system) of CHARM.
Of course I can change the ibase to production system manually in SDCR but it seems a very error-prone method.
Now my question: is it possible to change the ibase component due to the creation of CR by copy rule or something like this?
Kind regards
Rayko

Hi Rayko,
We do not have this option.
Once in ChaRM, we assume that the changes will always correct an issue in the PROD system.
I would recommend to open the tickets directly with the PROD system IBase, once the issue is also happening there.
Best Regards,
Fernando

CcBPM, Async Messages and database update performance

We have several business processes defined and running in XI 3.0. Some are being invoked as web services.
Our performance/scalability is extremely poor. We believe the problem is the database, which apparently is being updated at a phenomenal rate. The database disk I/O is exceptionally high, and has been tracked to writing to the database container/table files and tranaction logs. The database has been carefully tuned, and we are rushing to migrate the db to a higher capacity machine.
It would seem, based on documentation, that the database updates are a result of the asynch message interfaces we are using through the business processes.
The first question is are we correct in the above statement?
The second question is are the db updates being done under a transactional scope, if so what is the isolation level of the update, and can we change the isolation level?
Third question, if the updates are due to the asynch message interfaces, can we use synch message interfaces and reduce the database work? If so, how?
Finally,

I don't think you'll find a documented general number of application variables you can have on a single server. But I think you could get away with 400 variables without any trouble.
Where you might run into trouble, though, is when you have multiple concurrent requests trying to read and change these values. You'll have to ensure that you single-thread write access to these variables using CFLOCK.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/
Fig Leaf Software is a Veteran-Owned Small Business (VOSB) on
GSA Schedule, and provides the highest caliber vendor-authorized
instruction at our training centers, online, or onsite.

Nokia store and software update

Hi my nokia asha 2055 doesn't want to access nokia store collections,my stuff etc....i've tried so many times to access it but it doesn't want to....and when i try to update the phone software it says,no new updates available what should i do?

If it says "No New Software Available" that means there is no update available yet. So its better to Flash your phone to resolve the problem.

Nokia Messagging and scribble updates only avialab...

Similar Messages

Maybe you are looking for