Nokia mobile camera use as web cam..?

My mobile is nokia asha 210 and i want to use its camera as web cam..
How can i do it..?
Can anyone help..?

There you go …

Similar Messages

  • Can I use my 5310 cam as a web cam

    Dear all
    I want to use my Nokia 5310 camera as a web cam
    The camera is detected on the PC on imaging softwares but camera is not detected on windows movie makers neither on messengers.
    Can any 1 help me on these

    This program may be able to do it:
    http://www.warelex.com/products/webcamlite/
    Try the demo and see if it works. You will need to have bluetooth on your computer as it doesn't work using a cable.
    If it doesn't you may be able to find alternative programs by searching google.

  • How do i use my web cam, where do i go to, to get started

    Can't figure out where to go to be able to use my web cam. Its not in my devices and printers area.

    Firstly, uninstall the current version of Cyberlink Youcam and re-install it.
    To Uninstall: Click Start >> type Programs and Features in search and select it from the list >> In there, select Cyberlink Youcam and uninstall it.
    Once done, try using webcam with Skype or any other messenger you may have, or else re-install Youcam.
    If the above does not work, do a System Restore to a previous working date when the webcam worked.
    System Restore: Click Start >> type System Restore in search and select it any perform on-screen instructions to restore the notebook to a previous working date.
    If none of the above work, open Device Manager, check if you have 'HP Webcam' listed under Imaging Devices category.
    You would find the Product Number on the sticker in the battery compartment, will be similar to XT594PA#ABA.

  • How do I use my web camera to chat and take photos?

    I would like to use my web cam to live chat and post pictures and do not know how to use it properly.

    Sorry, Its not related to Mozilla Support

  • How do I use the web cam on my pc? Hp w2007 I have windows vista

    How do I use the web cam on my pc?  Hp w2007 I have windows vista

    Hp w2007 is a HP monitor without webcam ...
    Where is the webcam?
    V.
    *** Say 'Thanks' with Kudos ***

  • Capture an image using the web camera from a web application

    Hi All,
    Could anyone please share the steps what have to be followed for capture an image using the web camera from a web application.
    I have a similar requirement like this,
    1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)
    2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.
    3) Upload the Image to the server from the temporary location.
    Please share the details like, what can be used and how it can be used etc...
    Thanks,
    Suman

    1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)There's not really any good way to do this with JMF. You'd have to somehow create a JMF web-start application that will install the native JMF binaries, and then kick off the capture device scanning code from the application, and then scan through the list of devices found to get the MediaLocator of the web cam.
    2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.You'd probably be displaying a "preview" window and then you'd just want to capture the image. There are a handful of ways you could capture the image, but it really depends on your situation.
    3) Upload the Image to the server from the temporary location.You can find out how to do this on google.
    All things told, this application is probably more suited to be a FMJ (Freedom for Media in Java) application than a JMF application. JMF relies on native code to capture from the web cams, whereas FMJ does not.
    Alternately, you might want to look into Adobe Flex for this particular application.

  • HT1941 why i cannot use my web cam using yahoo messenger and face time?

    whi i cannot use my web cam using yahoo messenger and face time?

    PwmBoat,
    This made me smile, because things like this do make me smile...  I never make videos on YouCam, but I did this time, so I could test this one out.
    You did not say what webcam software you are using...
    ======================================================================
     Video and audio recording works on YouCam V3.5.1.4606
    Make sure you have turned on a working microphone in Settings:
    YouCam > Right-Side   Settings >
    Right-Side, Lower-Right, Select a working Microphone from the Drop down list
    AND
    CHECK "Capture with audio"
    OK
    You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too.  (They have 3.x as well, but why buy what HP already gives you?)
    ==========================================================================
    I hope this helps!                                 
    We work hard to help!
    Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
    2012 Year of the Dragon!
    Kind Regards,
    Dragon-Fur

  • Can i use my web cam as a barcode reader ?

    Thats it in a nut shelll , can i use my web cam as a barcode reader .?

    Delicious Library is one the Mac Apps that will read barcodes from the isight camera.
    http://www.delicious-monster.com/
    Regards,
    Captfred

  • Connecting my ipad mini to my camera using the USB camera kit error message 'device is to powerful' keeps popping up.

    I am trying to connect my iPad mini to my Samsung camera using the USB camera kit, I keep getting the error message ' device to powerful'. Is there anyway to fix this or do I need to take it back?? The shop assistant in Currys assured me it should work and it wasn't cheap at £25 for a tiny wire! I have read other posts concerning this but they are dated quite a while ago so just wondered what the newest advice was concerning this. Thanks

    The camera is drawing too much power for your iPad. This can happen on cameras which charge their batteries using the USB connection. Make sure that you have the camera set to the correct settings for picture transfer - check the documentation that came with the camera.
    Note that you can return the USB kit and get the SD card adaptor or get a powered USB hub if you can't get the camera to work any other way.

  • How do i use my FaceTime camera as a web cam?

    I am trying to figure out how to use the facetime camera on my macbook pro as a web cam with non apple users. Please help.

    If you are trying to use Flash based web sites that you open in your browser, there is no difference in operation regardless of whether your webcam is being viewed by a PC or by another Mac user.  However, if you are having problems with Flash sites, verify that your Flash plug-in is the latest one that is compatible with your system.
      • You can find the latest Flash version that works with your OS X 10.7.3 using this page:
          http://www.adobe.com/software/flash/about/
    If you need to update, use your Mac's Disk Utility to repair permissions.  Then follow Adobe's instructions here: http://kb2.adobe.com/cps/908/cpsid_90893.html
    Be sure to uninstall your current Flash player before installing the new one.
    Repair permissions again immediately following installation of the updated Flash player.
      • Be aware that the current Flash Player Preferences can  be configured in your
         Lion Mac's  > System Preferences... These settings may be blocking Flash on a system-wide basis.
      •  Individual Flash settings are still configured in the same way as older versions:
          http://tinyurl.com/5kjv3
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • How to use the cam as a web cam

    How could i use the cam , which is already installed in the mac book pro as a web cam ?

    To talk to people?
    The iChat application will allow that.
    If you have a .mac account, then you can use that as your ichat user id and password, otherwise you can also use AIM - go here to create a user id and password and then enter them into iChat (remember to specify that it's an AIM account)..
    https://reg.my.screenname.aol.com/cqr/registration/initRegistration.psp?lang=en&locale=us&createSn=1&sitedomain=ww w.aim.com&siteState=http%3A%2F%2Fwww.aim.com%2Fgetaim%2Fcongratsd2.adp&mcAuth=%2FBcAG0dPhpgAAPd%2BA%2F8ZYUdPhtQIH1rLc92KTAoAAA%3D% 3D
    If that link doesn't work, then go to www.aim.com and click the button which says "get a screen name"
    Once done, anyone who has a .mac or AIM id can enter your user id and chat with you.
    Hope that helps.
    Best of luck.
    PS - iChat is the application with the speech bubble icon.

  • How to use same web cams with jmf?

    Hello, I'm doing a project with netbeans 4.1 and I need to use two webcams,the same model web cams.The problem is that jmf only detects one of this. I read that if you open two jmfStudio you can use two cams but I want do this programming in java.
    Somebody have any idea?
    Thanks for all

    Hello,
    Maybe you have already solve your problem...I think you could use something like this:
    Vector deviceListVector;
        deviceListVector = CaptureDeviceManager.getDeviceList(null);
              if (deviceListVector.size() == 0)
                   System.out.println("I can't find devices");
                   System.exit(0);
              if (deviceListVector == null)
                   System.out.println("I can't find devices");
                   System.exit(0);
              for ( int x = 0; x < deviceListVector.size(); x++)
                   CaptureDeviceInfo deviceInfo = (CaptureDeviceInfo) deviceListVector.elementAt(x);
                   String deviceInfoText = deviceInfo.getName();
                   System.out.println(deviceInfoText);
              }In this way you can see which devices are conected. I don�t know if it will be useful. :)
    ane

  • Using a web cam with an E-MAC

    I want to buy a web cam for use on my grand kids e-mac with skype. Is it possible and what type should I buy (they have hi-speed DSL access)
    Thanks, Don

    Keep in mind that the 10.4.9 OS X update enabled USB webcams to be used with iChat. However, not any webcam will work. It has to be what's known as a "UVC" webcam, which basically stands for "USB Video Class" Basically a standard for streaming video.
    http://en.wikipedia.org/wiki/Listof_USB_video_classdevices
    There's a list of webcams that should work on your Mac. Ironically the XBox 360 Camera is one of them.
    Personally, I've used the Quickcam Fusion before and the quality as at or possibly above what the iSight offered.

  • Using a Web cam on the mini

    Hi friends! Im a owner of an Mac Mini and I was wondering if is possible to use my IPad as Web cam on the mac mini?

    Vinicius,
    There is a way you can use your iPad as a webcam. There is an application on the App Store for your iPad called Mobiola Web Camera, and you can download it here:
    http://itunes.apple.com/us/app/webcamera/id348150234?mt=8.
    You can download the companion application for your Mac Mini here:
    http://mobiola.com/downloads/web_camera/Mobiola_WebCamera_for_iPhone_Desktop.zip
    Extract the zip file, and install the .dmg image.
    Hope this helps!
    emmanueltech3

  • Streaming video using a web camera is choppy

    Hello,
    I have an swf program built with flex which displays video from a web camera. The problem is that the the video is being displayed a bit choppy. You can see an example at https://www.completelyonlinetestserver.com/Flex/videobox.html. Try holding a piece of paper with writing in front of the camera and you will see that the writing is very choppy.
    What can I do to make the video clearer?  Any help would be very appreciated.
    Thanks
    Armen  

    Hmmm...I dont have the drivers installed on my computer for my web cam to work, but when I compile that example do get the trace output, "You need a camera.".  So that part works.  Below is the code ported into an MXML file.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                    layout="absolute"
                    applicationComplete="CameraExample();">
         <mx:Script>
              <![CDATA[
              private var video:Video;
            public function CameraExample()
                stage.scaleMode = StageScaleMode.NO_SCALE;
                stage.align      = StageAlign.TOP_LEFT;
                var camera:Camera = Camera.getCamera();
                if (camera != null)
                    camera.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
                    video = new Video(camera.width * 2, camera.height * 2);
                    video.attachCamera(camera);
                    addChild(video);
                else
                    trace("You need a camera.");
            private function activityHandler(event:ActivityEvent):void {
                trace("activityHandler: " + event);
              ]]>
         </mx:Script>
    </mx:Application>

Maybe you are looking for