Nokia N70 and Pc Suite 6.6 not connecting properly

I am having problems connecting to my phone from windows xp and pc suite.
Whenever i try to "backup" or use "file manager" i get connection errors. Nokia connection manager is showing connected ok. When i click 'file manager' i can see the N70, but as soon as i try to 'explore' it by double clicking i get an error similar to 'Operation could not be completed'. (sorry not at home at the mo, experiencing parity error in my organic memory! ;-p)
History:
I Previously had Pc suite 5 installed and connected via bluetooth to my Nokia 6600. I believe the problem is the old PC Suite software as I can connect on a works laptop but not from my home pc. I have removed all previous Bluetooth, Nokia software via add-remove programs but still no luck.
I have tried renaming my memory card and even re-formatting and renaming, no luck.
System Details:
Windows XP SP1
PC Suite 6.6 Rev 18
Nokia N70
CA-43 usb cable
v2.0539.1.2 19-10-05 RM-84
Can anyone help? I really don't want to uninstall and re-install windows if i can help it!

sorry, i thought i was replying to a different thread i had allreayd posted my problem in, whihc is...
I had the firmware updated on my N70 today to get rid of the dreaded orange home screen at a nokia dealer, but when I try to connect to my PC it won’t work.
When I first got home and plugged it in via USB windows first told me the USB device was not reqocnised, so I pulled out the cable and put it in as advised. it seemed to be ok then, but just after i went to transfer some music over but it wouldn’t let me (as if my phone was not connected) and PC suit said I didnt have a phone connected, although I could see my phone under 'my computer' but couldn’t transfer any thing over.
So I downloaded PC suite again to make sure I had up to date software and drivers, I already had them it seemed but I unistalled and install them again just in case. But when I come to set up the connection the set up screen simply hangs, although the cable is working as windows makes that noise and it pops up to say N70 found, but then a second later says the install didn’t work, all the time the setup screen still hangs in the background.
I have tried every thing in this thread and others including doing the clean setup from nokia.
My firmware version: 3.0546.2.3.18-11-05RM-84
Windows XP SP2
Please help.
Thanks

Similar Messages

  • I have a problem i have a nokia n70 and i want to ...

    i have a problem i have a nokia n70 and i want to put romanian languge on him how can i do it?
    my softuare version is 5.0638.3.0.1 18-09-2006
    please help me
    EDIT: Removed email addressMessage Edited by ajak on 14-Nov-2006
    02:15 PM

    The 2011 MBPs do not have a DisplayPort. They have a combination Thunderbolt and Mini Displayport. The adapter for standard Displayport and Thuderbolt/Mini Displayport are different. So you need a new adapter.
    http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA5OQ

  • My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • Win 8.1 and HP Officejet Pro 8600 not connecting

    Priior to installing Windows 8.1, my printer worked fine.  I installed Windows 8.1 and came across the message - Printer Error - Before you can perform printer-relate tasks...  I removed and reinstalled the printer and it worked.  I printed several documents yesterday.  This morning, went to print and the same error message appeared, printing error.  I checked under devices and printers and the HP printer was grayed out.   When I clicked on the printer under device and printers, it says printer not connected.
    I am using the printer on a wireless network.
    Please help in this matter.
    This question was solved.
    View Solution.

    Hi Dennis1825,
    I understand you've been having some issues with your Officejet 8600 printing since upgrading to Windows 8.1. I'm sorry to hear this has been happening but I will certainly try to help.
    To get a little extra help with this issue, I'd like you to download and run the HP Print and Scan Doctor (running for both Fix Printing and Fix Scanning to make sure it doesn't detect any issues) and hopefully it should be able to fix this for us.
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

    after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
    It is not practicale to do this always any one faces the same problem

    There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
    If no change with a new SIM card, the standard troubleshooting steps in order are:
    Power your iPhone off and on.
    An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPhone with iTunes from your iPhone's backup.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, your iPhone has a hardware problem.

  • I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I also had problem accessing my WD MyBookLive after upgrading to Maverick.
    To resolve the problem, I used  Connect To Server (Cmd K) to specify the IP address.
    Then I enter a user id and password I created in the MyBookLive.
    You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
    Just enter the MyBookLive IP address as the URL.

  • I just downloaded iTunes 11.0.3 on vista and it says iTunes could not connect to this iPod touch... Need help please

    I just downloaded iTunes 11.0.3 on vista and it says iTunes could not connect to this iPod touch... Need help please

    What is the exact wording of the error message?
    Try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • What can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either

    what can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either

    - Try restoring on another computer.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

    I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%.  I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

    Thanks for your reply Peter,
    I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat 
    Reader 9 to view the pdf. I created it by exporting. Attached is a 
    screen capture of the letterhead. Since I posted, I sent a test pdf to 
    my partner's computer eventhough it didn't look right on my system and 
    she said it looked fine to her. I've restarted my computer and tried 
    again and still get the same results.
    Thanks for your help,
    Pat Boullion
    Boullion Graphics
    281 444-5749
    Fax: 281 444-6507
    CONFIDENTIALITY NOTICE
    The information in this email may be confidential and/or privileged. 
    This email is intended to be reviewed by only the individual or 
    organization named above.
    If you are not the intended recipient or an authorized representative 
    of the intended recipient, you are hereby notified that any review, 
    dissemination or copying of this email and its attachments, if any, or 
    the information contained herein is prohibited. If you have received 
    this email in error, please immediately notify the sender by return 
    email and delete this email from your system.

  • When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

    Question
    When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

    Try some basic troubleshooting.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • I am trying to install the new update and it says I am not connected to the Internet . Any suggestions?

    once again I am trying to download the new update 8.1.3 and it says I am not connected to the Internet which I am. Any suggestions ?

    Have you tried restarting or resetting your iPad or your router?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Even though you are connected to the Internet, sometimes resetting your router can help. It's very easy to do. Just unplug it for about 30 seconds, plug it back in and let it start up.

  • Outlook 2013 are not opening and showing pst files are not closed properly

    Hi
    Outlook 2007 has stopped working and showing close the program. Again,we re-started then outlook 2007 and it has opened and taken the backup of pst files in a separate hard drive.
    The pst file was repaired in scanpst.exe and again i have tried to put the pst file back in outlook 2007.It was hanging and suddenly i have uninstalled 2007 and started installing outlook 2013.
    2013 applications like word,excel,power point are opening and outlook 2013 are not able to open and showing pst files were not closed properly.
    Again i have un-installed and re-installed the outlook 2013.still we are not able to open the outlook.
    Need your support at the earliest to fix the issue.
    Thanks

    Hi,
    What's the .pst file used for? Archive? Or you set up a POP3 account and want to import the emails from the .pst file?
    Another question, you mentioned you installed Outlook 2013 and it didn't open either. Was this from the beginning right after you installed Outlook 2013, or after you did something such as create a new Profile, set up a new account and tried to import the
    .pst file?
    Kindly answer my questions so I can understand the situation better.
    I've seen some of this issue caused by the anti-malware software, check your anti-malware software to see if it's trying to interfere with Outlook - things like real time email checking can sometimes cause these kinds of problems. To troubleshoot, we can
    simply disable the anti-malware software temporarily to see the result.
    Regards,
    Melon Chen
    TechNet Community Support

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • My iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!

    my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
    yours sincerly
    jackfromsurrey

    What I am saying is ..........
    The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
    The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship  with the Carrier and then follow the Carrier's process to unlock
    With a PAYG it usually means adding a specified (by the carrier ) amount  usually £15 /£20 depending on the carrier
    This is how O2 function and according to Gemma  this is how Vodafone work

  • I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work

    I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work

    I too am having the same problem. I'm glad to know it's not just me

Maybe you are looking for

  • How to delete a Customer in its SALES AREA?

    Hi All, I've deleted a Customer by t.code OBR2. But it exists again in its SALES AREA. Could anyone tell me how to delete it in the sales area too? Thanks

  • Tracking down a memory leak in LV8.2 when you can't use the profiler

    I am working with this large application. I have satisfied myself that it does have a memory leak by watching the Window's Task Manager while using the app. My first preference is to use the Profiler. However when I press 'Start' on the profiler, it

  • Travel Expense workflow status configuration

    Hi, A customized WF is used for Travel Expenses with two level of approval after WF request created by Employee. The problem faced is when first level approver approves the request the status visible to employee is "Trip on Hold" Where are it should

  • How to maintain EXIF information when exporting

    I've recently posted 2 photos on Flickr, afterhaving edited them in LR5.  Suddenly, might EXIF information is not showing under Addition Info.  I haven't altered anything in my Flickr settings.  Someone has suggested it could my export settings in LR

  • FM to pack transfer order to HU

    Hello Gurus, I am trying to prepare a functionality to pack outbound delivery (using transfer orders) to HU. I wonder if any of you had ever tried to do sth like that and with which FMs? I can use of course HU_PACKING_AND_UNPACKING to pack HU and the