Nokia N73 shut off during a software update

hallo, can any one help me with my phone(NOKIA N73)
l cut yesterday during a software update, the phone and the computer shut off by power lost in oure home building.
no the phone will not turn on anymore..and the computer don,t recoqnize the phone because of no power. the
battery was working fine..l searcing ALL day for some advice...but nothing! can any one help me with this problem
regards
nelleke

I think your only remaining option is to send it to the nearest Nokia Care Point.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Similar Messages

  • N80 Shut off during 5.0 update. Won't turn On at a...

    please can anyone help me on this?
    i did have the memory backed up on my computer before i did it, so if i need to take it in for a wipe/reinstall thats fine,
    but does anyone have any info that can help me?
    I was in Nokia PC Suite updating my phones software to 5.0 next thing i know the computer says "USB device disconnected" my phone shuts off, and it wont turn back on.
    ive tried taking the battery out and replacing it.
    Any help is much appreciated.

    Remove SIM and miniSD card first. Try to boot.
    The try hooking it up to the PC again. And see if you might be able to redo the update process.
    You can also try a hard reset. As described in a different tread. (Or read below).
    Othervise, I afraid you will have to take it to a Service Center.
    -- Quote from djassa1 (Re: N80 won't start up!)--
    Just reset to factory default.
    You will need your 2 hands to do that: While the phone is off press and hold the [Green call Button] + [3 digit button] + [* button] and power on and hold the powwer button. Do that until the phone asks you for the local city reference.
    -- End Quote --
    Best of luck!

  • TS5254 My computer was shut off during an update, and  now it wont turn on ;( please help

    My computer was shut off during an update and now my Iphone wont turn on .. please help

    You will have to restore the phone using your computer. You may need to use Recovery Mode if it doesn't appear in iTunes: http://support.apple.com/kb/HT1212

  • I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

    I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up

    Did you try to connect in recovery mode, as explained in this article?
    If you can't update or restore your iOS device
    If this does not work, get it checked by an Authorized Apple Service Provider or by Apple:
    iPhone - Contact Support - Apple Support

  • HT5362 How do I turn off notifications for Software Updates? 'App Store' doesn't show in the list of notification apps. I want the background checks for updates, just not the notifications.

    How do I turn off notifications for Software Updates?
    In the 'Notifications' section of the 'System Preferences' app, there is no tab for managing the notifications of System Updates nor App Store.
    Hey--- I like auto-checking for updates, and hey--- I like auto-downloading them in the background.
    BUT I do not like being notified of updates in the middle of working! Especially when it's iTunes updates. Grrrr.
    Any chance this is easy and I just missed it?
    THANKS COMMUNITY!

    Settings > Notification Center > Mail > Select the mail account (if more than one) > Alert Sound > None

  • Applying all update\patches during 'install software update' step

    Hi,
    I have created software update group (around 10 updates\patches) and deploy it to 'unknown computers' collection. Ts 'Install software update' step scans through and only installs 2 updates out of 10. I have kept deploy property as 'required' while publishing
    on 'unknown computers' and 'install software update' has 'All Software update' selected (other option is mandatory update'). I want to have all the 10 required update to be installed . any idea what should be the settings on 'deploy' prperty for software group
    that install all the updates in the group during 'install software update' step? Any pointers will be appreciated
    Regards,

    Hi,
    Yes , they need a reboot and reboot is happening automatically. I believe, once reboot is done, other patches should take over with installation. I don't see any information for another updates that are part of same software group. For these 2 succefully
    installed updates log has below that indicates they reboot and finish.
    WUHandler has log:
    1. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB2862330) (35dcb297-873a-45af-bb19-e8b18aedd5bb, 202) WUAHandler 2/5/2014 8:09:02 AM 2760 (0x0AC8)
    2. Update (Missing): Update for Windows 7 for x64-based Systems (KB2834140) (88152097-0294-4098-b27c-d2fd479e9831, 202) WUAHandler 2/5/2014 8:09:03 AM 2760 (0x0AC8)
    Update 1 (35dcb297-873a-45af-bb19-e8b18aedd5bb) finished installing (0x00000000), Reboot Required? Yes WUAHandler 2/5/2014 8:09:06 AM 2348 (0x092C)
    Update 2 (88152097-0294-4098-b27c-d2fd479e9831) finished installing (0x00000000), Reboot Required? Yes WUAHandler 2/5/2014 8:09:09 AM 356 (0x0164)
    Update (35dcb297-873a-45af-bb19-e8b18aedd5bb) has finished the post reboot operation. HResult: 0x00000000. WUAHandler 2/5/2014 8:10:46 AM 2152 (0x0868)
    Update (88152097-0294-4098-b27c-d2fd479e9831) has finished the post reboot operation. HResult: 0x00000000. WUAHandler 2/5/2014 8:10:46 AM 2152 (0x0868)
    Any pointers to figure out the status of other patches\updats that are part of same group?
    Regards,

  • HT1414 where can i change the location of the backup during a software update?

    hey
    during th software update i got a message that the backup could not be made due to enough free space on my C disk.
    is there a option to change this to an other location like my D partition

    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
    Mac - How to Move the iPhone & iPad iTunes Backup folder to an External Hard Drive
    http://osxdaily.com/2011/03/05/how-to-move-the-iphoneipad-itunes-backup-folder-t o-an-external-hard-drive/
    Windows - Change iPad default backup location
    http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
    Windows - Changing IPhone and iPad backup location
    http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
     Cheers, Tom

  • HT1688 during a software update, i lost all my apps. restore did not bring them back, how do i get my apps back?

    during a software update, i lost all my apps. restore did not bring them back, how do i get my apps back?

    Your apps will only be where you put them.  if you failed to put them on your computer beore updating, then they would certainly be gone.
    You can redownload them:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Battery shows over half charge then shuts off during use.

    iPhone 5 w ios7 shows over half charge in battery but shuts off during use listening to pod cast for example.  When placed on the charger it takes a couple of minutes then shows over half charged again. What's wrong?

    Hi
    If you have tried restoring and all the possible fixes you are still well within your warranty period book a genius appointment and they will offer you a repair or replacement.
    Hope this helps

  • I have moved to the country where my internet speed is slow.  I am running some auto updates that keep timing out half way through.  Can the time out be shut off to complete the update?

    I have moved to the country where my internet speed is slow.  I am running some auto updates that keep timing out half way through.  Can the time out be shut off to complete the update?

    bondod wrote:
    Can the time out be shut off to complete the update?
    I'm not sure about that. But what you could try is to set the Update Preference to "Manual" and try updating at a time when the Network may not be as busy, like late at night or early in the morning. 
    Just an idea.

  • My 4s shuts off during use of map directions

    My 4s shuts off during use of map directions

    Shut down the app...
    From any Home Screen, double tap the home button to bring up the Recents List
    Tap and hold any icon until they wiggle
    Press the red to delete the Maps app from this list.
    Press the home button twice when done.
    Restart Maps
    Also, try a reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • Laptop shut off during hard drive reset

    My laptop shut off during a hard drive reset and now it says to do a system reset but I don't know what to do

    Sure sounds like a hardware problem to me. To verify that you would need to attempt to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media.
    If you failed to create it, you can obtain it from Toshiba. Scroll down to Get Recovery Media here.
    For instructions, see the section Restoring from recovery media, which begins on p. 57 of the User's Guide.
       Satellite/Satellite Pro C800/L800/S800 Series User’s Guide
    -Jerry

  • HT202157 what do i do if apple tv is frozen during the software update?

    what do i do if apple tv is frozen during the software update?  It is mid-way through the Step 1 of 2 Preparing Update but indicates not to unplug the Apple TV while updating?

      connect to a computer by usb and require the firmware of the appletv

  • Nano with Nike + shuts off during run

    In addition to the "activity stopped" issue which is driving me crazy, now my nano (2nd gen) just shuts off during the middle of a run. Not a battery issue. When I press a button, it comes back on.
    All of a sudden this is happening and is driving me nuts. Is my receiver defective? It's not a sweat issue, as I wear a belt clip.
    As for loosening, I always wondered by the Nike receiver doesn't have two little clips that secure the receiver to the nano, like the syncing cables.

    Hello
    I am having the same problem too! About halfway through my 4 mile run, a voice over comes on and tells me that my activity has stopped. This continues for the rest of the run about every 5 - 7 minutes. Because of this, my 4 mile run only logs as a VERY SLOW 2 mile run.
    What can I do to fix this problem? The plugin is not loose and my IPOD is not giving me a reading that the battery in my shoe sensor is dying. I can't call for technical support because it is past the 90 day purchase, but I haven't even had the Nike+Ipod for an entire year yet! PLEASE HELP!
    Unlike the original posting, my IPOD does not shut off - so I know it is not an IPOD issue but instead a Nike+IPOD issue....

  • Phone shuts off during software install...

    just trying to install a theme on to my 8330 curve. i go to utilities in pocket mac, choose install new software and find the file. it confirms i want to install and begins. but after a few seconds, my phone shuts off, the little light turns red and a dialogue box on the comp pops up to say "device removal" blah blah blah. tried about 3 times and same thing happens every time. i installed the driver updates and everythinggg hhmpphhh. any help out there? be muchly appreciated...

    "Previously, when the service is lost, the phone beeps and says call failed."
    Clever phone!!! What accent/voice/gender does it have when it reports the failed call? What you're reporting here sounds more like the network reporting to your phone that the caller has lost connection to the network, not that you have!
    When the iPhone loses network connection (as opposed to the sender/network simply dropping the call) then you may be lucky enough to hear a click but otherwise you'll just get silence!

Maybe you are looking for