Nokia N79 will be geting new firmware Version v30....

Hi,
Nokia N79 will get new updated firmware Version v30.101 soon.
*lot of bugs fixed
*perfomance update...etc.
Solved!
Go to Solution.

Hi,
I connected my N79 yesterday on my PC with Nokia OVI.
It tells me that there was a firmware update and launched it.
But during this update, It tells me there was a USB connection problem and launched again the update......during 20 minutes to tell me finaly that there was again a problem.
So, now, I can't start my phone. When I push the power button, the screen lights on few seconds and stop.
I tried to to a hard reset (format) with the three buttons :
1/ 3 + * + green button
2/ Start button with the three button pushed
....but nothing hapens.
When I try to charge the phone, nothing hapens.
Thanks for yopur help.
Message Edited by kobayashi on 28-Oct-2009 03:38 PM
Nokia N8 RM-596 (SFR)
Code produit : 0599819
PR1.2
Version du logiciel : 014.002
Nokia MicroSD 16Go.

Similar Messages

  • Nokia N80 new firmware version 4.0707.0.7

    It's so bad firmware version!
    I have lots of problems with new firmware version 4.0707.0.7 that I haven't with past version 4.0623.0.42 !
    I can't understand what's going on with NOKIA Software Updater!
    >I can't enter to my "Gallery\Images & Video" from "Camera Mode"
    >My OS speed decrease
    >Captured photos don't show in "Images & Video" until I restart my N80
    >For each new files you add, you need to restart your N80 until your N80 find them in memory!!!
    Why past version haven't these PROBLEMS and new version have them!!!
    Does anybody know how can I return to my past firmware version (mean 4.0623.0.42) ? Is it possible?Message Edited by zoologist1 on 03-May-200712:28 PM

    04-May-200710:53 PM
    djassa1 wrote:
    Basically it means that BB5 phones like N-Series including N80 and E-series cannot be downgraded to a previous version once they have been upgraded. Trying that with third party tools, because it's not possible through NSU, will brick (dead) your phone, period.
    That's why I said you'd have to take the phone to a service center.

  • Nokia N96 New Firmware Version 30.033 and Camera F...

    I updated my Nokia N96 to the new firmware version 30.033 after which my phone camera is not working. When I press on the camera button it gives the message (Camera Feature not Supported). I played many tricks with it but of no use. I reset my phone to the original factory setting through (*#7370#) and Multi-finger process but of no help. I even reinstalled the updated version but the problem still persists. My camera worked fine before the update but now it gives the said message and the phone hanges up on pressing the camera button. I request nokia developers to help fix this problem and check their updates for buge before uploading them to the server to save users from problems & worries. If you found any solution for the problem then please let me know it on my E-Mail ID:  I will be grateful for your response. 
    Message Edited by Kay_Cee on 12-Jan-2010 03:40 AM

    hlepcha wrote:
    Kay_Cee
    You told everything about the firmware upgrades and the non-functional camera features.
    I did everything [firmware re-installation, hard-reset etc. etc.] to get my camera features back. This includes visiting the authorized Nokia service centre and paying them bucks.
    No luck buddy. I may have an ardent brand loyalty to Nokia but Nokia is letting me down every way.
    Any luck buddy? 
    you should not have had to pay a nokia care point for what ammounts to a warenty repair,
    The camera issue with the N96 upgrade is an uncommon but known bug,
    If a hard reset, or a firmware reinstall doesn't fix it then take the phone to a nokia care point and have them fix it for free under the warenty

  • Will appear a new firmware for nokia 5800?

    one question ... will appear a new firmware for nokia 5800 will soon ? Thnx !

    It's not about old or not, it's about that productcode which is under your battery. Take a look here, and follow the instructions. If there is not an update available, you just have to wait.
    http://europe.nokia.com/support/download-software/device-software-update/can-i-update#

  • New Firmware version

    The new firmware version it's ok for my apple tv 2 too?
    At the moment i have the 6.2.1 version.
    Thanks

    It seems that only the Apple TV 3 will update to Apple TV software version 7 (iOS 8).

  • EOS-M: there will be a new firmware?

    I'm trying to love this little camera ...but some things make it very difficult to me.
    Missing things to love the camera:
    1- I would like to disable the function Exp.SIM (Exposure Simulation) to see through the LCD in the dark ...Otherwise the EOS-M is unusable in a dark studio with studio strobes.
    2- Focus peaking is awesome and I would love to see it on this camera.
    I wonder if Canon will deliver a new firmware or this camera is already in the past.
    Regards.

    Welcome to Apple Support Communities
    Boot Camp Support Software 5.0.5033 supports Windows 8.1 and can be used with that version. The Mid 2011 iMac is compatible with Windows 8, so you should not have any problem by installing Windows 8.
    Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • New firmware version is out for Megastick 128

    There is a new firmware version (2.05)  for the Megastick 1 (128). Get it from Megastick 1 firmware page

    I upgraded it and didn’t see any major differences. However now there are many volume steps. Apart from that I noticed that when the radio is not tuned to a proper channel there is no noise, not a useful thing but those are the only differences I saw. Still cant record in 44k (records in 22k format). Anyone tried it and saw anything different ?
    One other thing, I don’t know whether this existed in earlier firmware versions, when you have a normal file which is not an MP3 file with the .mp3 extension you cant turn it on. I came across this when I tried putting several non MP3 files (ogg ) having the mp3 extension after .ogg didn’t work to see whether they have added support for new standards (Slim chance but who knows…   )

  • N93 no new firmware version available

    Hi,
    I'm a brand new discussion board user.
    I' bought my N93 thre months ago. My phone ID is 0531236 and my firmware version is 11.0.034.
    I've bought also a bluetooth headset BH-900 but it does not work. I've found in this board that there is a new firmware version (20.0...)
    that seems to fix the problem. If I try to update my phone via PC application I receive "no new firmware available" as answer.
    Any problems with my phone and firmware version?
    Thanx in advance for any replies
    -- gigi

    Well, my GE 31591GE1 keeps working just fine although still shows that message about available update. Anybody running firmware version 22.3 that would like to comment on this?

  • GE 31591GE1: new firmware version available (v22.3...

    Hi! There is a new firmware version available for my GE 31591GE1 (version 22.37). I'm currently running ver. 14.37 but before upgrading it I wanted to ask if anybody had upgraded to the new version and if there were any noticeable benefits or drawbacks.

    Well, my GE 31591GE1 keeps working just fine although still shows that message about available update. Anybody running firmware version 22.3 that would like to comment on this?

  • Will we see new firmware now that 802.11n was made official?

    Will we see new firmware for N routers now that 802.11n was made official a while back?

    Let me first say that I am not employed by Cisco or Linksys, and that this is just my opinion:
    My opinion is that the first routers to show up with "final wireless N" firmware will likely be new routers.  This is because there is competitive pressure in the market place for manufacturers to start selling new routers with "final wireless n" firmware.  I am sure everyone wants to be the first to apply a sticker to the box proclaiming "This router meets the final wireless N standard", or something like that.  After new routers are on the market with this firmware, then the manufacturers will have time to start updating older routers.
    Also note that "draft-n certified" devices are all reportedly compatible with the final wireless n standard, so, in that case, there might not need to be a firmware upgrade.
    Message Edited by toomanydonuts on 11-05-2009 12:36 AM

  • When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?

    Hello Adobe,
    When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?
    Best regards
    Frank

    There won't be an update for Lightroom 4. The only way you can work with your D750 raw files is to use the free standalone DNG converter to create DNG copies. If you want to be able to work on the NEF files then you will have to upgrade to Lightroom 5. Lightroom does not use the Camera Raw plug-in. Everything is part of the Lightroom program. If you want to stay current with Lightroom then you need to follow the update/upgrade path. That means purchasing each new major version of Lightroom or subscribing to the creative cloud plan.

  • Problems in new firmware version of nokia 5800 xm

    1. display goes dull...... 2. in music player there is no find option, so i have to find a song from 8000 songs.....it takes long time to search a perticular song. 3. maps are not displaying as before..(in version 31 ) so i request to nokia to release the new version of firmware of nokia 5800xm as soon as possible.else release version 31 as it was again..... desperately waiting for new firmware...........

    What version are you using? v50?
    1. Display goes dull because of power saving. You can set the time to how many seconds later does the display go dull
    2. There is no find option, but there is a search app in the internet menu (it searches phone contents as well)
    3. Maps not displaying means the maps data on your card is not compatible with maps version.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Is the new Firmware version of 5800 supports VoIP?

    I want just want to ask for those whoe already updated their 5800 to version 40 firmware if their phone already supports VoIP. I've read on some forums that Nokia 5800 doesn't support VoIP. Is the new update already have like the VoIP support of N97?

    mj_monserrat wrote:
    I want just want to ask for those whoe already updated their 5800 to version 40 firmware if their phone already supports VoIP. I've read on some forums that Nokia 5800 doesn't support VoIP. Is the new update already have like the VoIP support of N97?
    No, it's voip capabilities are exactly the same as previous firmware versions so it still does not support true native voip like the N97 does.
    The 5800 is highly unlikely to ever receive this feature.  As before you will need to use a program such as fring or nimbuzz for voip on the 5800.

  • 5310 new firmware version 08.23!

    I bought a Nokia 5310 the other day. it had the 5.81 or so firmware on it. Knowing from the boards that 7.01 was available, I immediately upgraded, and to my surprise found that 08.23 was available.
    This new firmware hasn't received any discussion or announcement, so I wanted to point out its existance... The date stamp when using *#0000# is 23/7/2008.
    Those who can, may also reply to say what differences they found. ;-)
    cheers
    My Nokia history: 5310 (Sep 2008), 5300 (Jan 2007), 6610 (June 2003), 3310 (2001)

    I am a little disappointed by this new update. I previously had the 5.xx firmware version. Some things have been changed, and not necessarily in a good way. The default screensaver has been changed, and it's pretty lame and boring. The default screensaver that I had before the update was really cool, and lots of my friends liked it a lot.
    The font size in the music player has been chaged also, it's a little bigger.
    Another thing that I have noticed since the update and bothers me (and it's just a personal opinion, maybe it's not a general issue), it's this: in whicever menu I am (excepting the standby screen), the colors are a little dim, the brightness is a little pale, it's like the background color is a little foggy. Before the update, the colors were real good and strong, in whichever menu in the phone I was. But now are a little pale and foggy, which is really disturbing for me.
    That is what I noticed in the first hour since the update.
    So for now, thumb down for Nokia!
    P.S. I also agree that when a new version is released, there also should be some release notes, so we know what to expect.

  • NOKIA 5610 CAN'T UPDATE NEW FIRMWARE 6.60&7.12!!!!...

    juz now i 've found tat there r 2 new firmwares available for download .BUT it is only for other country!!my software updater oso shown tat my firmware now(4.18)is the newest..y we can't update our phone's firmware while ppl from other country can????

    These questions come up time and time again. Two main factors affect this:
    (1) Updates are phased in around the world because there are numerous regional variants, it is not just a single softwarfe for any particular model worldwide. Some regional variations may lag behind others.
    (2) If the phone has operator-version software instead of standard Nokia software, Nokia must await the approval of the network before it may release updates.

Maybe you are looking for

  • BUG: File History fails with no warning- Event ID 201

    I apologize for the long post but I want to summarize everything I've learned about this so far, as it looks like a critical bug. I am unable to get File History to backup my files with Windows 8.1.  I set up a 1 TB USB HDD as the target drive and it

  • Hierarchy loading Error in Production system

    Hi All, I am loading Hierarchy file, the file is there in application server(AL11), in external tab i gave same path. but when i try to load it is showing below Error message. Invalid entry, hierarchy 0XMK4PVWO05BM4GP5KVEFQ9L4 does not exist. Diagnos

  • Required Text Field for automatically generated line items

    Hi Experts, I have noticed that when additional line items is automatically generated by SAP, the line item text field becomes required for those items.  This happens regardless of the configuration made in the field status group.... For example, whe

  • Too many Parameters in the Selection Screen

    Hi all,       I have a requirement to include too many parameters in the selection screen. Let me explain the scenario.   1.  There is an option for Output File name previously. But now i need to provide fields for 5 to 8 file names in the same  Sele

  • Transport all Ques Tab strip in Development to production transport system

    By mistake, some one click TRANSPORT ALL QUES Tab strip in Development to production transport system. All objects in development went to production and it is changing the cubes. Is there is any chance to revertback  transportation. Its very Urgent.