Nokia N8 - After restart getting "Unable to compl...

Every time I restart my N8 i get an error message saying
"Unable to complete installation, to install app go to application manager"
Yet, when i go to app manager, and then install Installation files, there is nothing there, and its empty.
How can I get rid of this error message?
thanks

> I lowered the minimum RAM per core to 1GB, because the Adobe site recommends that as a base setting for andHD project
When you say "the Adobe site recommends", what exactly are you referring to? If you're quoting recommendations written for After Effects on the Adobe website, you're very likely quoting me. And this is what I wrote in the Help document:
"Memory & Multiprocessing preferences":
"The amount of RAM required for each background process varies depending on your system configuration; at least 1 GB per process is recommended. Optimum performance is achieved with computer systems with at least 2 GB of installed RAM per processor core."
This blog post gives essentially the same advice, but with more explicit suggestions.
But, as I say at the bottom of that blog post, if you find that some other settings are working better for you, that's great. Every project and computer system are different. Do what works for you.
> Also, if it is an
dual quad core system, there should be 8 cores, but in the
multi-processer preferences panel it lists CPU's as 16.
The number of "virtual" processors can be double in a system that uses hyperthreading. After Effects doesn't actually treat these as separate processors in this context, though.

Similar Messages

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?

I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!

How to fix ? please advise: In Adobe LiveCycle ES2, JBOSS(4.2.1.GA) node unable to join cluster after restart.

Hi Team,
We are using Adobe LiveCycle ES2, JBOSS(4.2.1.GA) on windows OS.
We are facing issue after every time we restart JBOSS. JBOSS node after restart is coming up but unable to join the cluster.
We are getting below error in the jboss server.log:
2014-07-18 00:25:37,206 WARN [org.jgroups.protocols.pbcast.GMS] join(10.183.100.39:61469) sent to 10.183.100.39:64118 timed out, retrying
2014-07-18 00:25:44,206 WARN [org.jgroups.protocols.pbcast.GMS] join(10.183.100.39:61469) sent to 10.183.100.39:64118 timed out, retrying
2014-07-18 00:25:51,206 WARN [org.jgroups.protocols.pbcast.GMS] join(10.183.100.39:61469) sent to 10.183.100.39:64118 timed out, retrying
2014-07-18 00:25:58,207 WARN [org.jgroups.protocols.pbcast.GMS] join(10.183.100.39:61469) sent to 10.183.100.39:64118 timed out, retrying
2014-07-18 00:26:05,207 WARN [org.jgroups.protocols.pbcast.GMS] join(10.183.100.39:61469) sent to 10.183.100.39:64118 timed out, retrying
Could you please help to advise on this.
Thanks.

My apologies about the wall of text. After I made my original post, I thought maybe it would better to go back and put it in a pastebin instead. I was not able to edit that post once I sent it.
In regards to your question, the permissions on the
/Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist file is "read and write" for system, wheel and everyone.

"Airport Utility was unable to find your Airport after restarting"

Airport Express B has been working great for two years, and suddenly it can't be found in Airport Utility.
When I hard reset it, and re-set it up again, I go through the whole procedure, using the Utility to write the new settings : "The settings for this Airport Express have been successfully updated...waiting for Airport Express to restart" and at that point nothing happens - the light stays continuously green, no restart, and shortly afterwards I get the failure message "Airport Utility was unable to find your Airport wireless device after restarting".
I come out of Airport Utility, reopen it, and it can't find the Airport Express. Nothing. A £65 brick that has ceased to be, and this forum is full of people with similar problems. I've tried all of the fixes, including hard-wiring it using Ethernet, and again it goes through the whole procedure abut when trying to restart the AE, fails to find it.
Are Apple making any response to these issues ?

Thanks Martin - I can download it from the Apple website, according to this discussion :
http://discussions.apple.com/thread.jspa?threadID=1085243&tstart=30
My concern is that a) it may not work with an Intel MBP, and that it may break my Airport - totally. Could you let me know what you're running it on ?

Airport Utility was unable to find your Airport device after restarting.

- I just updated the firmware on my base station (it a white dome?? i think snow?) to 5.7
- I am running AirPort Utility 5.5.2 (also recently updated)
- I have (3) AirPort Expresses (just updated firmware yesterday) and now are not being seen in the airport utility. They had been running for about two years just fine.
I have done a hard reset and was then able to see the Airport Express and go through set up. Upon finalizing the set up I get this message:
"Airport Utility was unable to find your Airport device after restarting."
This is happening with all 3 AirPort Expresses

Hello !
I had the same kind of problems when I upgraded to the latest version of Airport (5,7).
The Airport express seemed to have been disconnected, and nothing I could do to reconfigure it, after hard resetting it, seemed to be working.
I did two or three hard resets before remembering having been in a situation like that a while ago.
I went back to the Mini, **deactivated the firewall (in the "preferences" panel), then deactivated also the firewall of the Modem/router provided for my internet connection. Then I went in the other room and did another hard reset of the Airport express, came back in the mini's room, opened the Airport utility, the icon of the Airport express was already visible (which wasn't the case before... ), did the re-configuring.
The reconfigured Airport express reappeared very quickly, then I reactivated the firewalls of the Mini and the router. Voilà !
It took less than two minutes !
And since then the Mini have been streaming music without a glitch to the Airport express.
I hope this will help you and others !

"Airport was unable to find your base station after restarting"

Trying to connect AX to my HP printer for wireless printing. Walk through the process of joining my wireless network, everything appears to work (finds my base station, finds my wireless network). When I finish the final step, macbook appears to hang but then comes back with this error message "Airport was unable to find your base station after restarting"..."problem rejoining the wireless network or finding the base station". I then go into Airport Utility again and base station is gone. I have to reset AX to factory setting (removing any profiles) before Utility recognizes AX again. I repeat process...same results, ugh. Any help would be appreciated.

I updated to 7.3.1, and just wasted 3 hours getting my Airport Express working again. What a nightmare.
Flashing amber light after update to 7.3.1 and not found by Airport Utility. Hard reset allows Airport Utility to find it, but after configuration never found again and get flashing amber light, until hard reset again...
Here are the steps that worked for me to get back to 7.3. and functional Airport Express.
1) I had ethernet connected, I was unclear whether ethernet doing anything but desperate. Performing reset from MacBook with airport on.
2) Hard reset on Airport Express so that Airport Utility can find it. (i.e. press reset button for 5-10 seconds until light flashes amber 4 times. The factory reset did not seem to work.)
3) Cross fingers that Airport Express shows up in Airport Utility. (Did most times for me, but not always.)
4) Hold down Option key and select Check for Updates from Airport Utility application menu. This allows selecting old updates.
5) Download 7.3.
6) Click Manual Setup (for the Airport Express)
7) Select Upload Firmware from the Base Station menu
8) Select 7.3, apply, cross fingers
After applying 7.3 may need to do one more hard reset, I am not sure if it showed up again on its own. However, once available in Airport Utility and once again with the 7.3 firmware, was able to configure and get working again as normal.
Apple link with tips for firmware and Airport Utility:
http://support.apple.com/kb/HT1218

I am having a problem opening pdf files. I get an error message saying a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19 Can

I am having a problem opening pdf files. I get an error message saying
a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19

Hi AdobeFiles,
I'm sorry to hear that you're unable to open PDF files. Please see this Help document: Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI for solutions.
Let us know how it goes!
Best,
Sara

Issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login

Is there a way that I can get Automator to start a server for me after restart of Mac

Hello!
I have a serverprogram from an external company that doesnt start after a restart of the mac that I run that server on. It starts the program but it doesnt start up the server of the program. All settings are right and I have consulted others with same config. After a restart the server turns up in the statusbar but as turned off. So I can go to the statusbar, click on the symbol and choose "start server".
As I cant get the server to start up automaticly I was wondering if I can get the automator to start it up for me after a restart of the mac?
Ifso how?
/ Mikke
Macmini i5 Mavericks

I found out how to make a flow and how to make a program of that. BUT it wont execute after restart. Anyone?

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This hass been going on for several months, and Apple has never contacted

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked? Any suggestions?

Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*
at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

My computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?

my computer shut down in the middle of downloading a movie rental and after restarting my computer, the rental was deleted. How do I get it back without paying for it again?

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Nokia N8 - After restart getting "Unable to compl...

Similar Messages

Maybe you are looking for