Nokia N8 Belle update process stuck, help!
I am on product code 0599399, updated my Ovi suite to Nokia Suite 3.3.86 and started the process to download and update my N8 running on anna to belle. It finished downloading the large update file and went through the process of backing up my contents and after that i got an error message "Something went wrong" Next screen it tells me that "Your phone is restarting" (with a couple of warning messages) but i have been on this screen for at least 45mins now without any progress. My phone is still behaving as per norm but i'm not sure about what to do next. It doesn't seem like it had started the process of updating my phone yet but i'm being given instructions not to touch the phone or even disconnect the cable, Help, what do i do? Has anyone else experienced this?
@j_peso
Comes a point that you will have to disconnect, but depends upon whether you are left with a black screen and device left in "flashing mode" in which case Nokia Care Point would have to recover device fror you.
Happy to have helped forum with a Support Ratio = 42.5
Similar Messages
-
Nokia 500 Belle Updating problem
Hello,
I've installed the latest version of Nokia Suite. It showed me Nokia Belle Demo and I installed but I cannot find Nokia Belle update. I'm currently using Anna version.
Please help.Sorry for double posting but I forgot to say my current version
Symbian Anna, 011.033. -
Nokia 500 belle updates please?
if i was not mistaken, symbian anna or should we say symbian ^3 phones should be able to get belle updates on q4 of 2011 but it was postponed and was moved on q1 2012 which is january to be specific, with great courage ang faith to nokia, we users waited for so long, and now nokia vietnam announced an update on feb 8 2012 and all of us were excited then now, there are so many complaints about the update, now nokia 500 will wait for a week? A month? Nokia, will you please be considerate on your customers?
Hi trarumaya,
You cannot install fonts yourself, the only way to get additional languages on your phone is to visit your local Nokia Care Point and ask them to do it. Please note that they can usually install only local languages, so it's best to phone them or visit the shop for more information.
If you only want to browse websites, we would advise you to give Opera Mini a try as it is capable of displaying different language fonts.
Hope this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
Problem with checkboxes in IR report mainly for update process please help
Hello,
Can anyone please help me out with this issue.
I have an interactive report with 3 checkbox item for a single column named status. Based on the value of the column status the check box should be checked. For example:
DECODE(status,'DEV',1,0) as DEV,
DECODE(status,'RVW',1,0) as RVW,
DECODE(status,'PRD',1,0) as PROD,
So for this I have used the apex_item.checkbox item. Below is my report query
SELECT APEX_ITEM.HIDDEN(30,0,'','f30_' || ROWNUM)
|| APEX_ITEM.HIDDEN(31,0,'','f31_' || ROWNUM)
|| APEX_ITEM.HIDDEN(01,ROWNUM,'','f01_' || ROWNUM)
|| APEX_ITEM.HIDDEN(04,CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN,'','f04_' || ROWNUM)
|| APEX_ITEM.HIDDEN(05,CHF_STATUS,'','f05_' || ROWNUM)
|| APEX_ITEM.HIDDEN(06,CHF_STATUS,'','f06_' || ROWNUM)
|| APEX_ITEM.HIDDEN(08,CHF_STATUS,'','f08_' || ROWNUM)
|| APEX_ITEM.HIDDEN(09,CHF_STATUS,'','f09_' || ROWNUM)
|| APEX_ITEM.HIDDEN(11,CHF_STATUS,'','f11_' || ROWNUM)
|| APEX_ITEM.HIDDEN(12,CHF_STATUS,'','f12_' || ROWNUM)
|| APEX_ITEM.CHECKBOX (32,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f30'');"'
,DECODE (0,1, ROWNUM),':','f32_' || ROWNUM) DELETE
,CHF_COLUMN
,CHF_STATUS
,APEX_ITEM.CHECKBOX (07,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f05'');"',DECODE (CHF_STATUS,'DEV',ROWNUM),':','f07_' || ROWNUM)
DEV_EDIT
,APEX_ITEM.CHECKBOX (10,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f08'');"',DECODE (CHF_STATUS,'RVW',ROWNUM),':','f10_' || ROWNUM)
RVW_EDIT
,APEX_ITEM.CHECKBOX (13,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f11'');"',DECODE (CHF_STATUS,'PRD',ROWNUM),':','f13_' || ROWNUM)
PRD_EDIT
FROM CHF_COLUMN WHERE
CHF_DATASTORE = 'DOMAIN_DEV' AND
CHF_SCHEMA = 'SCHEMA_DEV' AND
CHF_TABLE = 'EMPLOYEEE'
ORDER BY 1; And I have a button for the update process so that the users can check the checkboxes option for the status column either 'DEV', 'RVW', 'PRD'. The status of the column can be in either of these states or can be null.
I have a update process, its having some problem - I don't understand whats causing the problem. Below is the error message which I encountered when trying to update.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
My Update process.
DECLARE
l_cnt BINARY_INTEGER := 0;
l_stepid number := 10;
l_date DATE := SYSDATE;
BEGIN
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
IF APEX_APPLICATION.G_f05 (i) = 1 THEN
UPDATE CHF_COLUMN
SET CHF_STATUS = 'DEV'
WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
l_cnt := l_cnt + SQL%ROWCOUNT;
apex_application.g_print_success_message := apex_application.g_print_success_message ||
'Successfully updated'||l_cnt ||'<br><br>';
END IF;
IF APEX_APPLICATION.G_f08 (i) = 1 THEN
UPDATE CHF_COLUMN
SET CHF_STATUS = 'RVW'
WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
l_cnt := l_cnt + SQL%ROWCOUNT;
apex_application.g_print_success_message := apex_application.g_print_success_message ||
'Successfully updated'||l_cnt ||'<br><br>';
END IF;
IF APEX_APPLICATION.G_f11 (i) = 1 THEN
UPDATE CHF_COLUMN
SET CHF_STATUS = 'PRD'
WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
l_cnt := l_cnt + SQL%ROWCOUNT;
apex_application.g_print_success_message := apex_application.g_print_success_message ||
'Successfully updated'||l_cnt ||'<br><br>';
END IF;
END LOOP;
COMMIT;
END;If you can please have a look at the app, you can get a better understanding of my problem.
Workspace : orton_workspace
username : [email protected]
password : sanadear
Application No: 15089 SAMPLE_CHECKBOX_APP
Thanks,
Orton
Edited by: orton607 on Aug 4, 2010 9:28 AMI could be wrong but maybe change the hidden items to be like:
APEX_ITEM.HIDDEN(05,DECODE(CHF_STATUS,'DEV',1,0),'','f05_' || ROWNUM)
APEX_ITEM.HIDDEN(08,DECODE(CHF_STATUS,'RVW',1,0),,'','f08_' || ROWNUM)
APEX_ITEM.HIDDEN(11,DECODE(CHF_STATUS,'PRD',1,0),,'','f11_' || ROWNUM)so that the values are 0/1?
Also, you have
DECODE (CHF_STATUS,'DEV',ROWNUM)instead of
DECODE (CHF_STATUS,'DEV',0,1)in the checkboxes, as I would expect.
I'm also not sure why you need to duplicate the checkboxes (f07,f10,f13) as hidden items (f05, f08, f11) if they are both 0/1 values. -
Hi guys
Anyone else having issues after the new Belle Update on C07. My apps dont work as they should - notable TotalRecall is now broken again.
The Contacts lookup when dialing feature died.
I understand that OS updates are required when if they break your software - whats the point?
JohanHey,
Do you have up-to-date version of the Total Recall app? Have you contacted/reported the problem to the application developer yet? (http://www.killermobile.com/applications/symbian-s60/total-recall-symbian-call-recorder-|-beep-free-...)
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates -
Update process stuck "Updating library"
So, I have a large database (~400GB--been meaning to split it out into smaller dbs for a while but haven't taken the time to figure out how to yet). Tried to update it last night, and after the initial 10 step update process which went by after a few minutes, saw an error that there were inconsistencies and that Aperture needed to restart. I clicked ok, but it never restarted and instead began to update my library picture by picture. It's been stopped at 27649 of 130340 for a long time now, and I'm wondering if there's anything I can do. Activity monitor doesn't show any life (1.1 percent of CPU constantly and no change in RAM usage). I know people have said not to force quit, but I'm not seeing another option here. But even if I do force quit, I'm not sure what my next steps should be.
With 130,000 images in your library, and the fact that Aperture is using CPU (albeit a small amount), my suggestion is to wait another 12 hours or so, if you can afford to. If you force quit, you'll be doing more work down the road and it will take just as long.
-
Help nokia N8 belle update !
Since updating my N8 to the belle so I'm having loads of probs. After my initial update the phone was fine but, now there is a few updates posted in nokia suite i.e. social widget, BBC Iplayer plugin etc.
When I attempt to install these updates the handset switches off to restart and nothing happens ? The handset can only be restarted using the hard reset option which losses all my data on handset
I have had to perform this option at least 3 times now which has become very frustrating, even now if I were to switch the handset off I would need to perform the hard reset to start up again !
I am unable to update the maps app and I cannot restore a backup from my nokia suite because this also requires a restart which the handset simply will not do ! What can I do to fix this ?I presume you are hard resetting and restoring your backup before installing updates. If this is the case then I think some bad setting in your backup could be causing this.
Try hard reset and then do all the updates before restoring backup and if possible only restore personal data and preferably not settings. -
hi all, someone should please advice. Is it safe to update to nokia belle. Cause all i heard about the belle aint good. Some fellow e6 owners pls advice. Thanks
Solved!
Go to Solution.Perhaps have a look at this resource also before making any decision over updating as it is not easily reversible:http://www.nokia.com/hk-en/support/product/e6-00/
Personally as no need for Microsoft Apps and as E6-00 is fairly sluggish anyway I choose to remain with Symbian Anna. When you say "is it safe" there is always a small risk when updating software via Nokia Suite and could depend upon whether Nokia Care facility fairly easily accessible wherever you are.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Nokia C7 - Belle update problem - connection to th...
Dears,
I have Nokia C7 with following details:
- release: symbian anna
- sw ver: 024.001
- product code: 059B7W7
RM-675
browser: 7.3
flash: 4
java: 2.2
while connecting it to nokia suite 3.6.36 to update to symbian belle i get msg connection to phone was lost the another msg connection is active and whatever click next to continue it display connection lost msg again as in attachment.
May i have help about my problem
Regards
Ahmed
Attachments:
C7 update.jpg 63 KBHi, actually my phone keeps on while displaying connection lost msg, once it stops appearing the nokia suite goes on deep silence and finally while trying to close it displays busy operation, i dont know which release of RM-675 matchs my phone according to details in previous post. may u guide me ?
Thanks
Moderator's note: We do not allow mentions of unauthorised software on the discussions boards -
Nokia e7 - belle update battery status
Hi
i upgraded my nokia e7 to nokia belle recently and I was very excited but after the update I found out that there no longer was a battery status showing the percentage left. I really liked the old battery status so you would know how much battery life is left. It is just a bit weird that a very good thing from the previous version is discontinued on the belle version. I'm sure many others would agree with me on this..
Solved!
Go to Solution.the battery level in the new structure has the same 7 levels... you can check it out just like that... not necessarily you would need a visible info on the battery level
anyways
All 7 parts filled up - 100%
6- 80%
5-65%
4-50%
3-35%
2-20%
1-10% -
Updated to Server 3.0.2 - Updating process stuck
I'm updating from Server 3.0.1 to Server 3.0.2 and the process seems to be stuck. It's been sitting for about an hour.
I can bring up individual services using the serveradmin command line tool (and I've got the Wiki and Xcode services running) but the Server.app tool won't ever launch, it just keeps getting stuck again. If I try Server.app on a different machine to connect remotely, it cannot see the server.
Any ideas? It seems to be a failure in the administration services if I can get collaboration/wiki/Xcode up, but I'm not sure how to debug that.Hi Colin,
I had the same issue with the 3.0.2 update. I found a solution for my system and maybe this will work for you too. Most server settings were retained, read this entire post before you proceed.
Make sure you have a good backup before you start. Use Carbon Copy Cloner or somethingn similar to have a duplicate that you can boot from if this messes things up.
In Finder, move the Server.app from /Applications to the Trash. This will prompt the system to say that moving the Server.app to the trash will terminate all server services. The move will require an admin password verification.
In Finder, navigate to the /Library directory and locate the Server folder. Rename the Server folder, I named mine "Server_Old".
Restart the Mac for good measure.
After you log back in, drag the Server.app from the Trash back to the Applications folder and launch the Server.app. It will run through the update to v3.0.2 again, but shouldn't hang up this time.
This was the fix for my system, running better now than when I upgraded to Mavericks. After the Mavericks update, I couldn't run Device Management, Profile Management, Wiki or anything needing psql. This fixed it all.
THINGS TO BE AWARE OF...
Open Directory and Profile Manager all retained their users and settings.
I wasn't running DHCP on this server, but DNS server configuration was completely gone. Had to redo all DNS entries, if there are a lot of DNS entries in your server you may want to try to recover them from the /Library/Server_Old folder and move the DNS files back into the new /Library/Server folder. I feel like DHCP would also be blank.
Caching server had to be turned on, settings had to be redone. Lucky there aren't many options to consider here.
Software Update server had to be turned on, settings had to be redone. Not many options to consider, so no big deal.
File Sharing had to be turned on, but all previous shares were still setup.
Netinstall had to be turned on, but all previous settings were retained.
Time Machine had to be turned on, but all previous settings were retained.
These are the only services I run, so you may have other things to consider. Good luck. -
No weather widget on nokia N8 belle update
Hello. I have flashed my phone to Symbian belle, but i cannot seem to find the weather widget. I have the weather app on my phone, but ni widget. where can i download it? Or enable it?
Solved!
Go to Solution.Nokia Maps alternative from BetaLabs arrived.
http://betalabs.nokia.com/apps/weather-widget
BetaLabs save our lives -
Nokia C7 - Belle Update - SMS Sender preview
One thing is annoying me about Symbian Belle but I may be missing something...
When your phone is locked and you receive a message, you unlock it and it says one message received. At this point is is obviously useful to have the option to see the sender (if its from O2 or whoever then you can ignore!). I am sure this was available before Symbian Belle, anyone know if I am missing something?
ThanksThanks for the reply.
Belle seems a bit backwards compared to Anna in that regard. If there was a notifications widget then that would do the job. Also if you cant see the sender they should either fix that or get rid of the pop up I guess and then its quicker to access the pull down notification thing.
Hopefully they will sort but if anyone knows an app that would allow you to see the sender in a preview without the whole message I would be grateful?
Thanks -
IS SYMBIAN BELLE UPDATE GONNA B CUMIN FOR NOKIA C7
Itz gonna b long tym telling bout d nokia c7 belle update...wen itz gonna officialy **bleep**...i hav been waitin for it a long....
We expect it to come out on February. Just be patient.
If you want to thank someone, just click on the blue star at the bottom of their post -
Nokia N8 (Belle) Operator Messages
Hi.
Before the software update from Anna to Belle I could setup my phone to receive operator messages like adding a 050 subscription which will display on the homescreen from which antenna the phone signal is received.
I can't find this option to setup after the Belle update.
Any help would be very much appreciated,....... thanks again for your reply.
I've got the widget on the home screen and added a 050 supscription but still no messages.
It was working before the Belle update.
If you or someone else has another idea please let me know .......
Maybe you are looking for
-
Did I destroy my Hardrive? what are my options now?
Hello forum. I am in desperate need of your help today. I have a macbook air 11inch. Here is the story guys: Last night I was watching a youtube video as well as downloading a few videos. my Macbook air froze completely. I didnt even get the spinning
-
First of all thank you all for the kind help and to apple for all the support in these times of wonder for me. Anyways I tried the suggested solution and again reaching the review prompt and opting create new Apple ID doesn't take me to the option no
-
INS-20802 Oracle Private Interconnect Configuration Assistant failed
Thought I would post what information I've gathered, after facing this error during install of RAC Grid Infrastructure 11.2.0.1 on Red Hat Enterprise Linux Server release 5.5 64-bit, as Oracle Support is once again unable to help. Maybe this will sav
-
Hi everyone, I have been researching MPLS for a few days now with the intention of setting up a network to test MPLS operations using 2651xm routers and 2950 switches. Presently Iam simply gathering general information before I start the project. If
-
Mistake in Forte WebEnterprise Designer
Hi : I have a "odd error" in my aplications, this error is ERRATIC. The error is the following : qqdb_ResourceException caught while executing EXECUTE tag named SUBMISSIONHandler.ProcessAction Original message: Execute failed for dynamic SQL statemen