Nokia N8 Camera defect blurred spots unsharp

It seems that the N8 have the old N86 problem with blurred spots in the picture. My old N86 was two times changed by Nokia, because blurred spots in the camera pictures.
Now my N8 have the same problem on the left middle corner:
Moderator's Note:
We have removed the link in your post as it didn't seem to be adding anything relevant to the thread . Please be aware that Nokia Support Discussions accepts no commercial publicity of any kind.
Cheers!
EnioReh01

I HAVE A SIMMILAR PROBLEM WITH WHAT YOU ARE DESCRIBING...ITS A BLUR SPOT, AT THE LEFT SIDE WHEN IN LADSCAPE POSITION...GEZZE WHAT THE HECK IS THIS....I JUST NOTICED THIS TODAY...AND MY REPLACEMENT PERIOD IS ALREADY OVER....WHAT SHOULD I DO....

Similar Messages

Nokia N8, Camera Issue: Black spot

Saw others have had the same issue.. and tried the "solutions"
Black spot in same location on every picture / live preview of the image on the camera mode.
tired cleaning the lens, does not work. Guess its a hardware problem/ faulty lens?
need a bit of info before i go back to Virgin to get a new hand set

I just had the same issue appear on my Nokia N8. I looked back in my pictures and it started about two hours ago based on pictures I'd taken (I take a lot!).
Anyway I searched for the solutions you had referred to and found ones saying a shake of the phone resolves the problem. I tried but to no avail, I still had a dark spot. I read further about explanation of dust or micro-organism (and how this should not be possible as they units are sealed airtight in the factory) and decided that I would knock the phone against my hand (more forgiving than a wall or table) to see if this helped. Lo and behold the dark spot disappeared!
It is worrying that there may be something falling around in front of the lens of my camera and just hope it does not reappear soon....

Nokia n8 camera defect

suddenly i discover that my 2 week old N8's camera gives a scrambled view when started. The kind of scramble you see when the tv is júst off channel, horizontal bars.And after a few moments it freezes like that and i have to turn off the machine and restart.
I reset the factory setting, with no change. And now wondering what is different between what's on it now and what was on it yesterday, cuz then it still worked.
Anyone got a clue what i can do to fix this cursed phone ?

hey man....the same issue i had with my cell a few days back....you knw the stipes comin n d freezing...
try this(it worked for me...) do a hard reboot ...by keeping the power off switch for atleast 8 secs till the phone vibrates about 3 times....then switch it on it shuld be up n runnin...
if tht dosen't work try dis....
hold the menu+volume down+camera+power off button to reboot...
hope dis works...try n tell ur results...
ur lucky dude...my n8 is in the worse state possible...check my post!

The new Nokia Pro Cam is not user friendly AT ALL ...

After the Amber update on my Lumia 920, I downloaded the new Nokia Pro Cam app, due to most people claiming that it produces very good quality photos. I agree that the photos clicked using Pro Cam are of better quality than those clicked with the built in camera app. But this Pro CAM is not at all user friendly.
First thing is the most frustrating. The built in camera app allows taking photos by just touching anywhere on the screen, but the Pro Cam required you to touch one specific spot on the screen for this purpose. This is highly inconvenient, especially when taking self photos using the main camera. I know that the photo can be clicked even using the camera launch button, but this serves no purpose because pressing that button actually shakes the phone a bit and makes the photo blurry.
The next thing is, the settings of Pro Cam are denoted by symbols and not text. Camera professionals may feel comfortable with these images, but for the common man, its really difficult to understand what these symbols actually mean. I don't understand how Nokia came up with the idea of complicating matters by replacing the text with symbols for settings.
Finally, there are no settings at all for the front camera, which is also a disappointment becasue we're forced to use the deafult settings.
Hence, in spite of better image quality with this Pro Cam, I'd rather stick with the built-in camera app because the Pro Cam is too cumbersome and tedious to use. So what do you people feel about this Nokia Pro Cam?

Hi,
Maybe the following explanations can help.
1. There is a plus point to this also. Suppose you need to only focus on a subject and not shoot straight away. You can do that by touch the screen where you want to focus, without actually taking the shot. Shot can then be taken by pressing the dedicated on-screen shutter button.
I actually prefer it this way. You just can do that in the WP8 camera app.
2. Here again, all the symbols used are standard photography symbols you will find on any dedicated camera. Even they don't have full names, only symbols. This should not be a major problem, you will learn very quickly what all these symbols mean.
3. People usually use front camera for video chat (or to check if your hair is ok or not!). The requirement for video chat is that you don't need a very high end image/video quality. Moreover, the front facing camera quality is not that good too, so there is no point is providing all that functionality used for rear camera.
You can try using Nokia Glam Me lens, to add some post processing to selfies.
Best Regards,
Ayushmaan
If this post has helped you in any way, you can show some appreciation by clicking the star below

HELP ! NOKIA N8 CAMERA FLASH WONT WORK

Hi All,
My three month old Nokia N8 camera flash wont owrk under any light conditions, you can switch it on manually, leave it on auto..... doesnt matter it wont flash.
Anyone else found the same problem? any solutuions?
kind regards
Gippa

you need to take device to a nokia care point.
For details on how to find your nearest point, please see the 'support' pages of the Nokia web site for your country.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia 808 camera lens not working - help

Hi, my Nokia 808 camera shutter is not opening or closing. It is stuck in a half opened state. M is there anything I can do, before sending in for repairs, to try and reset the shutter? I can't take any photos as they end up over exposed! Thanks

If it's mechanical shutter has failed you have no choice other than to return your 808 to Nokia Care facility for repair!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia pro cam for lumia 920

Hi I have a nokia Lumia 920, I updated it to amber using nokia software updated for retail. At that time I was able to install nokia pro cam, but I had to reinstall amber because of minor problems and when I tried re installing pro cam it said "this app does not support your device". Please advice me what to do, I really love the pro cam app

http://discussions.nokia.com/t5/Nokia-Lumia/Nokia-Pro-Cam-on-Unlocked-Roger-Lumia-920/m-p/2103131#M6...
The silence will fall

Nokia pro cam

I have Nokia lumia 920,updated and all with the l'asta versions(it id updated)
when i want to put the Application "Nokia pro CAM". It tells me that My phone canot. Have it
i download ed Others and no problema. But pro CAM does not let me download?????

Temporarily unavailable for some reason: http://answers.microsoft.com/en-us/winphone/forum/wp8-wpapps/lumia-920-gdr2-amber-nokia-cam-pro-in-m...
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia Pro Cam photos post-processing makes yellowi...

Hello there! I'm here to report a common problem which happens while taking pics with Nokia Pro Cam on my lumia 920. When you take a pic it has right colours and is very sharp but after apps' post-processing the pic turns yellowish and a bit softer. It doesn't look too good after that treatment. I'm asking for patch that would prevent this problem. While I was at Windows Phone central-forums I saw that I'm not alone with this issue.
There is photos when one can see this issue.
First is just after taking pic and second is after processing it. I guess one can see very clear difference.
Attachments:
wp_ss_20130829_0004.png ‏1693 KB
wp_ss_20130829_0005.png ‏1377 KB

shadow118 wrote:
I see the same thing on my 620 (yes, I know Pro Cam is not officially supported by the 620 and would not work as good as on 920 or 1020, but I found a way to get it the interface is just so much better)
When I take a picture with manual focus, in the screen the pic looks sharp, but when i open the gallery, it changes (wll, postprocesses) to blurry
just a reminder, using unsupported apps may cause serious hardware problems in short/long term. i'm sure u won't be happy when u see melting plastic parts and some smoke on your device
The silence will fall

I have an iphone 4 and i'm having lot of problems: my back camera is blurred although my front camera is fine and working normal. my biggest problem is that the screen is showing colored horizontal lines

I have an iphone 4 and i'm having lot of problems:
_ my back camera is blurred although my front camera is fine and working normally
_ my biggest problem is that the screen is showing colored horizontal lines(as perhaps electrical problems). The phone did fell and I already changed its back and front but everything was normal until these problems appeared suddenly
Please can somebody help me to solve it and tell me what are the reasons?
Thx

you can try turning it off and on again, but i doubt that's gonna work, that sounds like more of a hardware issue. Your best bet may be to contact apple and seek service or replacement

Nokia Pro Cam: Color Temperature / Balance

As a creative I purchased this phone as to take better photos. As it does that sometimes others the auto color balance doesn't get it correct. Using the limited manual settings isn't very good either as usually they are worse. If anyone at nokia reads this would you please consider adding in 3-4 steps between each color balance setting so if say "sunny" is too warm you can go a step in one direction or the other to fine tune how it looks. Adding this feature would really make it a better application and help get perfect photos everytime. As of now the iphone auto color balance tends to look betteer, eventhough the quality of the Nokia images are better if the color isn't as pleasing then its all for nothing. Please add finer color balance / color temperature controls to the Nokia Pro Cam application!!

Photoshop CC has made Camera RAW available as a filter. That means it is easy to use it on video.
Can you do anything in Camera RAW to a video that you can't do the hard way with color correction and levels, etc, in Premiere Pro? No. Is it easier because you are used to the sliders? You bet!
This first frame is from a video I shot to test the codecs my camera can use. The trees are rather dark, because, well, I didn't care when I shot the video. I was concerned with the movement of the juggling toys.
But if I take it into Photoshop and use Camera RAW I can do very quickly what would take a lot longer, for me, in Premiere Pro. You will have to take my word for it that the color of the shirt in the corrected frame is more realistic. The Camera RAW settings were pretty much what I do to almost all of my photographs. Very slight adjustment to exposure, a little clarity, bring out the shadows, bring down the highlights that are too white and bring up the contrast.

Plz help me my Nokia N72 camera plz plz :(

Hi friends
i am new plz i need ur help
my nokia N72 camera when i open the cover its coming like "unexpected error please switch off the device and restart"
what i do now please help me friends .......: (

Do you have the "Mute" switch turned on? This is on the right side of your iPad above the volume up/down buttons.
Regards,
Steve

Crummy Camera Lens Blur CS6

The Camera Lens Blur effect that came with AE CS 5.5 and CS 6 doesn't look nearly as good as the old Lens Blur effect that came with CS 5; it's pretty much unusable for my purposes. Foreground elements that should be sharp render sharp, but with a blurry halo around them. The old Camera Lens blur does not exhibit this behavior, nor the Frischluft Depth of Field plugin.
Here's an image showing the depth map and how the three plugins render it:
CameraLensBlur.png
The images are composited from 16-bit PNGs rendered out of Cinema 4D. There's a nasty halo visible around the foreground particle in the upper left in the CS6 Camera Lens Blur version. I saved the old Lens Blur effect as a preset out of a CS5 project and am, fortunately, still able to use that approach in CS6 since the "improved" version of the plugin looks pretty crummy (I skipped AE CS5.5). As a test I installed the demo of Frishluft's Lenscare plugins, and after inverting the depth buffer in the plugin I got a good result.
The "new" Camera Lens Blur is acting like the Compound Blur effect. Foreground elements appear sharp but with a blurry halo since the entire "background" is being blurred, creating a blurred ghost of the foreground element. The old Lens Blur effect was very slow, but it did work.
Anyone know how to make this new "improved" Camera Lens Blur look like the other plugins? I've posted a zipped file with the image and depth map in a small AE CS6 project here if anyone here would care to check my settings. Maybe I'm missing somthing.
CameraBlurs folder.zip
Thank you.
Shawn Marshall
Marshall Arts Motion Graphics

It's been now more than 2 years now that Shawn referred to you this "bug". Thing that I doubt to be a bug. However, after 2 years now, and being on CC 2014.2, this is still ugly when using a depth map. The bokeh is nice, I give you that. But you clearly can't use it with a Dmap. I know it's pretty useless to tell you things that you already know, either make a bug report. It's clear now that it won't get any update.
And as someone here said, if you can't/don't wonna fix it, why can't you simply pack the old Lens Blur from CS5 as an obsolete effect ? Or let's go crazy, just buy the Frischluft (Dat name...) blur which works and pack it.
I would love, of course, to hear from you that you're on it and that a new release is coming soon... Anyway.
Just to remind you, here some pictures of what we are experiencing with your Lens Blur using a depth map.
Halo around the lens on the middle until the screw top right... and cannot be fixed by any way with the focal distance. But yes, the bokeh is really nice.
And here with the Frischluft
It simply works.
You could say then, why am I not buying it ? I'm considering it a lot now.

Cs6 camera lens blur not using curve ajustment on blur map

So I am doing some camera lens blur to create the 'tiny town' effect. I have completed following this tutorial: http://www.youtube.com/watch?v=oleQ9O3kaPk
But the camera lens blur doesn't seem to be taking into account any curve ajustments I make.
It is creating the blur effect as if the curve is not activated (even though it is and I can visibly see my ajustments to the gradient on the shape layer).
Anyone know what the problem is?

It works as it should. Effects referencing otehr layers use the layer source, not the effects result. You need to pre-compose the adjusted depth map.
Mylenium

Camera Lens Blur CS5.5

Hello. I just installed the new Creative Suite CS5.5 specially for the new features like warp stabilizer and Camera lens blur
I have even upgraded my PC to Intel core i7 - 2nd Generation processor with a normal basic graphic card. As I could not afford a really good one.
My question is..... about the feature Camera Lens Blur.
Inspite of having a very fast processor, the effect Camera Lens Blur takes forever to render..... even at Third or Quarter resolution...... And I am not even rendering a video. I am rendering a Jpeg photo.
why does it happen so? even at such small preview resolution and such fast PC ???
Any solution to make it faster?
I do know....effects like reduce noise and blurs take time....but this takes tooo much even on a JPEG..... So i am afraid....it might take toooo much on a HD video....
Help me regarding this
Thankyou,
Priyank.

Thanks a lot Mylenium and Andrew.
The jpeg was having a huge size of around 4000 by 5000 pixels ........ And I hadnt even Put the fast previews to OpenGL interactive. I reduced the resoution of the Jpeg. And now after doing both...... I am getting awesome reder speed even arnd 150 blur
Thanks a lot again..

Nokia N8 Camera defect blurred spots unsharp

Similar Messages

Maybe you are looking for