Nokia N8 does not support DTMF ! Can this be fixed...

My Nokia N8 does not seem to be able to do DTMF. This means no listening to voicemail, no using of call centers which asks to enter numeric options, no joining telephone conferecences with a pin and no remote activation of DTMF based server settings.
It is a real pain and I hope it can be fixed. If anyone has advice, it will be appreciated.
P.S. Please don't tell me that it can be done and all I need to do during a call is to select "Options -> Send DTMF -> Enter Manually -> * -> Y", because that is stupid. Entering 5 commands to select a single digit is rediculous. It is like saying that I can sail from Johannesburg to Cape Town because all I need is to dig a canal and then build a ship from matches. This much effort is as good as not having it and is entirely impractical during a call with various options i.e. voicemail or call center options.
Solved!
Go to Solution.

Was worried in case you may have forgotten how to use it between post 2 and post 11 . For myself I sometimes forget things that quickly.
Besides, I would love having the opportunity to teach someone how to dial a number on a telephone but am frustrated because I have never found anyone who needs teaching .

Similar Messages

Nokia E75 does not support sis files

I've been trying to upgrade the Ovi maps on my E75, because navigation has kept me saying that I need to renew the license. I went to Nokia web site and found out that I need to upgrade Ovi maps in order to get the free navigation. I have a 202.12.01 firmware and I installed it once again when I had unsuccessfully tried to upgrade Ovi maps. I have Ovi maps v3.01 09wk44b01 (MW OpenGL LM MN) and Map version 0.1.24.114 (OpenBitLM 6.22.5). I've deleted all old maps and started to download new ones successfully over Nokia Ovi Suite. I've downloaded Nokia Ovi Suite and followed the instructions for downloading and installing the newest version of Ovi maps application (I suppose it must be newer than the one I have on now, because navigation still wants me to buy license, I guess it must be 3.03 or higher). I've tried it several times from the scratch, just to make sure I did it right. Of course I've also chosen the right E75 phone from the drop down menu and I downloaded the file nokia_maps_3.01_09wk44_b01_s60_3.2_lm_rom.sis. I double-clicked it and everything seems to be right, but when action on the phone should be required the installation guide says "Nokia E75 does not support sis files". From the sis file name I can only now see that I have this version already installed.
Does this mean I can not use navigation for free on E75?
Can anybody help me ASAP, because I need the navigation evey day very badly?

I'v followed the directions of chanchan05 "Just uninstall the maps app, delete the folder and file I mentioned, then reboot your phone. Open the maps app, and it should recreate the qf file and cities folder in a version compatible to 3.03." on /t5/Maps-Navigation-and-GPS/Wasn-t-it-supposed-to-be-quot-Navigation-on-your-Nokia-Free/m-p/668305#M...
Afterwards I installed the sis file you pointed me to and it worked. The maps on the phone were deleted, so I downloaded new ones over Nokia Ovi Suite and tried the navigation. Unfortunately it stills demands buying the licence for the navigation.
I guess this is because the recommended sis file is v3.01 and not v3.03? Is that right?
Any other solution?

Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context

Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context
What Transparent Gateway (TG) 11g configuration steps prevent the following errors?:
a) ORA-12704: character set mismatch
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
Hints:
The current 9i TG works with the existing views and packages. These same db objects will not compile using the new 11g TG.
The db objects are on an Oracle 10g database linked to an SQL Server 2008 R2 database.
Since the 9i TG works I assume a configuration to the 11g TG will get it working same as before. But what...
Is is something controlled by these parameters? (Sorry, I don't know how this stuff works. I'm the application developer. My DBAs setup the Transparent Gateways.):
Parameters in the Gateway Startup Shell script:
    ORA_NLS33
    NLS_LANG
Parameters in the initsid.ora file:
    HS_LANGUAGE
    HS_NLS_DATE_FORMAT
    HS_NLS_DATE_LANGUAGE
I'm avoiding the known workaround to refactor the VIEWS and PACKAGES to contain CAST() statements to explicitly match the data types. A server side fix to the 11g TG is preferred.
Sample code:
a) ORA-12704: character set mismatch
   ... is caused by SQL that works with my 9i TG but not with my 11g TG. It's a snippit from my view that won't compile:
                  select status_code                  -- Oracle VARCHAR2(30)
                  from   ora_app_interfaces
                 UNION
                  select "StatusCode" as status_code -- SQL Server NVARCHAR(30)
                  from   SqlAppInterfaces
   Example workaround that I'm avoiding:
                  select status_code
                  from   ora_app_interfaces
                 UNION
                  select CAST("StatusCode" as VARCHAR(30)) as status_code
                  from   SqlAppInterfaces
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
   A line of code in the procedure that compiles correctly but fails to execute:
           -- Insert into SQL Server from Oracle
           insert into PatientMedRecNum (
              "PatID",         -- SQL Server INT
              "MedRecNum",     -- SQL Server NVARCHAR(11)
              "Hospital")      -- SQL Server NVARCHAR(30)
           values (
              pi_pat_id,       -- Oracle NUMBER
              pi_med_rec_num, -- Oracle VARCHAR2
              pi_hospital);    -- Oracle VARCHAR2
I'd guess the errors are caused by the TG's implicit conversion between the Oracle VARCHAR2 and the SQL Server NVARCHAR... but this works fine on the 9i TG... how do I set it up to work on the 11g TG?
Thanks!

Trace of 11g TG... generating errors due to lack of automatic mapping from SQL NVARCHAR to Oracle NVARCHAR, where the previous 9g TG mapped from SQL NVARCHAR to Oracle VARCHAR2.
Oracle Corporation --- MONDAY    SEP 22 2014 13:35:08.186
Heterogeneous Agent Release
11.2.0.4.0
Oracle Corporation --- MONDAY    SEP 22 2014 13:35:08.186
Version 11.2.0.4.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
setting HS_FDS_ARRAY_EXEC to default of "TRUE"
Exiting hgosdip, rc=0
ORACLE_SID is "xxxDEV"
Product-Info:
Port Rls/Upd:4/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.2.0.4.0_0019, Instance:xxxDEV
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HS_LANGUAGE not specified
rc=1239980 attempting to get LANG environment variable.
HOCXU_SEM_VER=102000
Entered hgolofn at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "PATH"
Setting PATH to "C:\oracle\product\11.2.0\tg_2\dg4msql\driver\lib"
Exiting hgolofn, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2014/09/22-13:35:08
Entered hgolgon at 2014/09/22-13:35:08
reco:0, name:abaccess, tflag:0
Entered hgosuec at 2014/09/22-13:35:08
uencoding=UTF16
Entered shgosuec at 2014/09/22-13:35:08
Exiting shgosuec, rc=0 at 2014/09/22-13:35:08
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
HOSGIP for "HS_FDS_DEFAULT_OWNER" returned "dbo"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2014/09/22-13:35:08
HS_FDS_CONNECT_INFO = "sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2014/09/22-13:35:08
dsn: sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV, name:xxx_admin
optn:
Entered hgocip at 2014/09/22-13:35:08
dsn:sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV
Exiting hgocip, rc=0 at 2014/09/22-13:35:08
Entered shgogohn at 2014/09/22-13:35:08
ohn is 'OraGtw11g_home2'
Exiting shgogohn, rc=0 at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "HS_FDS_ENCRYPT_SESSION"
using 0 as default value for "HS_FDS_ENCRYPT_SESSION"
RC=-1 from HOSGIP for "HS_FDS_VALIDATE_SERVER_CERT"
using 1 as default value for "HS_FDS_VALIDATE_SERVER_CERT"
Entered hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Exiting hgogenconstr, rc=0 at 2014/09/22-13:35:08
Entered hgopoer at 2014/09/22-13:35:08
hgopoer, line 231: got native error 5701 and sqlstate 01000; message follows...
[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed database context to 'Xxx_XXX_DEV'. {01000,NativeErr = 5701}[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed language setting to us_english. {01000,NativeErr = 5703}
Exiting hgopoer, rc=0 at 2014/09/22-13:35:08
hgocont, line 2764: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2014/09/22-13:35:08
Exiting hgolosf, rc=0 at 2014/09/22-13:35:08
DriverName:HGmsss23.dll, DriverVer:07.01.0093 (B0098, U0065)
DBMS Name:Microsoft SQL Server, DBMS Version:10.00.2531
Exiting hgocont, rc=0 at 2014/09/22-13:35:08 with error ptr FILE:hgocont.c LINE:2764 ID:SQLDriverConnect
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 128 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2014/09/22-13:35:08
Entered hgoulcp at 2014/09/22-13:35:08
Entered hgowlst at 2014/09/22-13:35:08
Exiting hgowlst, rc=1 at 2014/09/22-13:35:08
SQLGetInfo returns Y for SQL_PROCEDURES
SQLGetInfo returns 0x1f for SQL_OWNER_USAGE
TXN Capable:2, Isolation Option:0xf
SQLGetInfo returns 128 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 134 for SQL_MAX_PROCEDURE_NAME_LEN
HOSGIP returned value of "TRUE" for HS_FDS_QUOTE_IDENTIFIER
SQLGetInfo returns " (0x22) for SQL_IDENTIFIER_QUOTE_CHAR
13 instance capabilities will be uploaded
capno:1992, context:0x0001ffff, add-info:        0
capno:3042, context:0x00000000, add-info:        0, translation:"42"
capno:3047, context:0x00000000, add-info:        0, translation:"57"
capno:3049, context:0x00000000, add-info:        0, translation:"59"
capno:3050, context:0x00000000, add-info:        0, translation:"60"
capno:3066, context:0x00000000, add-info:        0
capno:3067, context:0x00000000, add-info:        0
capno:3068, context:0x00000000, add-info:        0
capno:3069, context:0x00000000, add-info:        0
capno:3500, context:0x00000001, add-info:       91, translation:"42"
capno:3501, context:0x00000001, add-info:       93, translation:"57"
capno:3502, context:0x00000001, add-info:      107, translation:"59"
capno:3503, context:0x00000001, add-info:      110, translation:"60"
Exiting hgoulcp, rc=0 at 2014/09/22-13:35:08
Entered hgouldt at 2014/09/22-13:35:08
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2014/09/22-13:35:08
Entered hgobegn at 2014/09/22-13:35:08
tflag:0 , initial:1
hoi:0x12ee18, ttid (len 32) is ...
xxx
xxx
tbid (len 10) is ...
0: 09000F00 0FAC1E00 010A [..........]
Exiting hgobegn, rc=0 at 2014/09/22-13:35:08
Entered hgodtab at 2014/09/22-13:35:08
count:1
table: XXX_INTERFACE
Allocate hoada[0] @ 0000000005F58270
Entered hgopcda at 2014/09/22-13:35:08
Column:1(InterfaceID): dtype:2 (NUMERIC), prc/scl:20/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:2(TableName): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:3(TableID): dtype:4 (INTEGER), prc/scl:10/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:4(StatusCode): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:5(StatusTimestamp): dtype:93 (TIMESTAMP), prc/scl:23/3, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:6(InterfaceLog): dtype:-9 (WVARCHAR), prc/scl:400/0, nullbl:1, octet:800, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
The hoada for table XXX_INTERFACE follows...
hgodtab, line 1073: Printing hoada @ 0000000005F58270
MAX:6, ACTUAL:6, BRC:1, WHT=6 (TABLE_DESCRIBE)
hoadaMOD bit-values found (0x40:TREAT_AS_NCHAR,0x400:UNICODE_COLUMN)
DTY NULL-OK LEN MAXBUFLEN   PR/SC CST IND MOD NAME
3 DECIMAL N         22         22 20/ 0    0   0   0 InterfaceID
12 VARCHAR N         60         60 128/ 30 1000   0 440 TableName
4 INTEGER N          4 4   0/ 0    0   0   0 TableID
12 VARCHAR N         60         60 128/ 30 1000   0 440 StatusCode
91 DATE N         16         16 0/ 0    0   0   0 StatusTimestamp
12 VARCHAR Y        800        800 129/144 1000   0 440 InterfaceLog
Exiting hgodtab, rc=0 at 2014/09/22-13:35:08
Entered hgodafr, cursor id 0 at 2014/09/22-13:35:08
Free hoada @ 0000000005F58270
Exiting hgodafr, rc=0 at 2014/09/22-13:35:08
Entered hgotcis at 2014/09/22-13:35:08
Calling SQLStatistics for XXX_INTERFACE
IndexType=SQL_TABLE_STAT: cardinality=0
IndexType=1: PK_XXX_Interface
IndexType=3: IX_TableID
IndexType=3: IX_TableName
Calling SQLColumns for dbo.SQL_app_INTERFACE
#1 Column "InterfaceID": dtype=2, colsize=20, decdig=0, char_octet_length=0, cumulative avg row len=15
#2 Column "TableName": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=60
#3 Column "TableID": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=64
#4 Column "StatusCode": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=109
#5 Column "StatusTimestamp": dtype=93, colsize=23, decdig=3, char_octet_length=0, cumulative avg row len=125
#6 Column "InterfaceLog": dtype=-9, colsize=400, decdig=0, char_octet_length=800, cumulative avg row len=725
3 Index(es) found:
Index: PK_XXX_Interface, type=1, ASCENDING, UNIQUE, cardinality=0
#1 Column 1: InterfaceID
Index: IX_TableID, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 3: TableID
Index: IX_TableName, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 2: TableName
Exiting hgotcis, rc=0 at 2014/09/22-13:35:08

Nokia N900 does not support USSD

nokia n900 does not send USSD numbers such as the * or # before the number it shows incorrect number and most of prepaid customers can't chek there balance such as in United Arab Emirates i cant check my balance and balance enquiry number is *121# and nokia n900 show that it is incorrect number. Nokia carpoationmust do something for it

WOW Update of MEMO resolve the USSD code problem now all Prepaid users can check there balance or execute any query to us USSD like *123# its working perfectly
Thanks Memo Team to resolve this problem
WOW new Update of MEMO resolve the USSD code problem now all Prepaid users can check there balance or execute any query to us USSD like *123# its working perfectly Thanks Memo Team to resolve this problem
Feel Free to update its not effecting on any Data or any setting on your N900 (Recommended that create a backup before executing)

Latest version of itunes does not support Quicktime can not play movie from library

Latest version of Itunes does not support Quicktime. I can not play movies out of my itunes. Please fix

I don't usually download video from the iTunes store. I had a couple of long plane rides coming up and thought I might have time to watch the Stanford IOS7 programming class. On the plane I discovered this issue which has gone unaddressed since 2011 and has been worsened in Mavericks. in 2011 the advice was to open iTunes' get info pane and click run in 32 bit. That worked at least for some people. In Mavericks, iTunes will not launch in 32 bit.
For the files you can locate in the finder ( mine are at
/Users/raine001/Music/iTunes/iTunes\ Media/iTunes\ U/Developing\ iOS\ 7\ Apps\ for\ iPhone\ and\ iPad/1.\ Class\ Logistics\,\ Overview\ of\ iOS\,\ MVC\,\ Objective-C.mp4
) you can click on the file in the finder and it will launch in QuickTime. For some reason on the plane I could see the first lecture in the iTunes view but, although I could see all the other lectures in the finder, I could not see the first one.
Ah well, maybe some other year I'll think about getting up to speed on ios7. Heck, maybe by then they will design a decent user experience.

HT1752 My Mac desktop does not support Adobe, can I upgrade?

My Mac desktop does not support Adobe or wireless printer, Can I upgrade?

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Mac cant get to a certain website. says does not support netscape.how do i fix this .

when trying to get to a certain web site, it says can not support netscape. how do i fix this

what website?

Having trouble with my screen becoming larger than the phone supports. Can this be fixed easily?

Having trouble with my screen becoming larger than my phone supports. Can this be corrected without taking the phone to an Apple store?

The sign on screen (where the current time and the slide to unlock) and if I can get it to open, the next screen that show all the apps. Have been unable to get any further that that second screen. The screen contents appear to be about twice the size they should be. I have been able to "reset" the phone by turning it off, but the problem happening several times a day and now occasioanally the reset does not work. This just started happening about 3 days ago and is increasing in frequency. I have had this phone about 14 months.

IMac does not support Power PC. A fix?

My iMac does not support Power PC. Is there a Reader fix?

If your Mac is PowerPC the latest version that you can run is Reader 9.4. Adobe stopped ALL development of PowerPC versions of software in November of 2010, and Apple doesn't even support PowerPC Macs or software anymore. It may not be what you want ot here, but your Mac is obsolete.

Could not complete the Video Frames to Layers command because Ps does not support video on this mac

im trying to make a gif but it does not allow me to import the video frames this pops up when i do click it.

Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978

My nokia phone does not support default code 12345...

Plz help me

Hi Baliyan4044,
Welcome to Nokia Discussions.
If the default code doesn't work it will have been changed at some point. If you can't remember it, please visit a Nokia Care Point where the phone can get reset. If there's no Care Point in your country, please contact your Care line. You can find your nearest Care Point and country's Nokia Care number here.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Will not power on, can this be fixed?

i bought an ipod and it will not power on. the water sensor is color white, so i dont think that is the problem. is there anything I can do or should I take it in? probably cost just as much to fix as to buy a new one and I cant do that. any suggestions?
i'm not sure what the iOS is

Try:
iOS: Not responding or does not turn on
If not successful, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
If defective, Apple will exchange you iPod for refurbished one for this price:
Apple - Support - iPod - Repair pricing

LR 2.3 does not support Canon 500D/T1i .CR2 - Fix? Hint?

I have a Canon 500D, upgrading from a 450D. It seems that .CR2 file from this camera are not supported.
Do you have tips, tricks or anything else to help?
Thanks

From a fundamental point of view, raw converter software should support a camera as soon it is released - or at least very close to. Unfortunately, photographic industry is not quite able and probably willing to reach this goal. Still, it is one of the most important requirements of the users and the imaging industry needs to get its act together to reach this ideal, much closer than it is now. That requires certainly a better culture of communication between software vendors and the equipment industry or a higher degree of standardisation.
However, Adobe is with upcoming ACR 2.4 and Lightroom 2.4 one of the quickest vendors to support the 2009 camera models already released, possibly, they are even the quickest. So they do a pretty good job on providing camera support timely. Other vendors need several quarters for adding support or even refuse to support popular models at all (such as CaptureOne with the Lumix G1, at least this is what I heard lately).
Kind regards
Thomas

Nokia Suite does not support MMS and calender??

When do we get support for MMS and calendar / tasks?
It has worked in versions prior to Ovi Suite, bad not to get it to work 2012 ;-)
Nokia have posted in other forums that it is planned for several years now.

I run Nokia Suie version 3.5.34. In this version I see symbols for MMS messages. Unfortunately The content is ZERO after I sync with my phone despite the fact that I have several hundred MMS messages in my Nokia N95 8GB.
I have also tried to establish the Smart Groups. These could in theory find my old MMS messages and sort the based on various criteria. Unfortunately this is useless since the content is still ZERO after I sync with the phone.
I have also had this problem with different Nokia software (Ovi, PC Suite). Now my phone has around 4000 SMS and MMS in it and is slow and useless. I really need a backup and organizing function that works on a PC! When I delete the messages one by one on my mobile it takes me about 45 seconds per message!!! I do not have the time and patience for this **bleep**.
To Nokia: Can you help??

ORA-02070: database HS_ABS_VW does not support ROWIDs in this context

I have two heterogeneous connections with sql server in Oracle 9i. These are the inv_ tables and abs_ tables (HS_ABS_VW ) . When I add the inline view bas the ORA-2070 error will occur. When I run these separatly they run fine.
Anybody an idea?
SELECT week,toetsopdracht,gewas,rasnaam,batch,zaden,rn_total as "Start",Eind,Box || let || bereik as Labcode,Protocol
FROM
     SELECT a.*,
            lead(let,1) over (partition by box,protocol order by box,protocol) as bereik,
             lead(rn_total,1) over (partition by box,protocol order by box,protocol) as eind
     FROM
          SELECT sdu.u_week_of_processing as Week,
                 ad.method_code as ToetsOpdracht,
                  ap.crop_description as Gewas,
                  ad.variety_name as RasNaam,
                  ad.batch_number as Batch,
                  ad.number_of_seeds as Zaden,
                  sau.u_box_code as Box,
                  p.name as protocol,
                  bas.primertype,
                  bas.uitslag,
                  count(*) over (partition by sau.u_box_code,p.name) tel,
                  row_number() over (partition by sau.u_box_code,p.name order by sau.u_box_code,p.name,sau.u_box_position) rn_box,
                  row_number() over (partition by p.name order by sau.u_box_code,p.name,sau.u_box_position) rn_total,
                  substr(sau.u_box_position,1,1) let
          FROM sdg sd,sdg_user sdu,sample sa,sample_user sau,aliquot a,test t,test_user tu,u_protocol p,abs_determinations ad,abs_primaries ap,
               SELECT distinct ge.gewasnaam,gr.groepnaam,r.abs_product_number, r.abs_reciproke, p.primernaam, pt.primertype,u.uitslag
               FROM inv_uitslagteelten u, inv_primers p, inv_rassen r,inv_teelten t,inv_groepen gr,inv_gewassen ge,
                    SELECT k.teeltid, k.primerid,
                            concat(max(case when k.primertype = 'f' then 'f' else null end),max(case when k.primertype = 'i' then 'i' else null end)) primertype
                    FROM
                            SELECT teeltid,primerid,'f' as PrimerType
                            FROM inv_uitslagteelten
                            WHERE onderscheidgroep = 1
                        UNION
                            SELECT teeltid,inteeltprimerid as primerid,'i' as PrimerType
                            FROM inv_teelten
                            WHERE inteeltprimerid is not null
                    ) k
                    GROUP BY k.teeltid,k.primerid
               ) pt
               WHERE pt.teeltid = u.teeltid
               AND pt.primerid = u.primerid
               AND pt.primerid = p.primerid
               AND pt.teeltid = t.teeltid
               AND t.rasid = r.rasid
               AND t.groepid = gr.groepid
               AND gr.gewasid = ge.gewasid
          ) bas
          WHERE sdu.u_abs_determination = ad.determination_assignment
          AND sdu.u_abs_product_number = ap.product_number
          AND sd.sdg_id = sdu.sdg_id
          AND sd.sdg_id = sa.sdg_id
          AND sa.sample_id = sau.sample_id
          AND sa.sample_id = a.sample_id
          AND a.aliquot_id = t.aliquot_id
          AND t.test_id = tu.test_id
          AND tu.u_protocol_id = p.u_protocol_id
          AND sdu.U_ABS_GROUP_CODE = bas.groepnaam
          AND sdu.U_ABS_PRODUCT_NUMBER = bas.abs_product_number
          AND sdu.U_ABS_RECIPROKE = bas.abs_reciproke
          AND p.name = bas.primernaam
          AND sd.sdg_id = 391
     ) a
     WHERE rn_box = 1 OR tel = rn_box
WHERE rn_box = 1

Very strange! Can someone explain to me why I don't get tjhe error when leaving the distinct out from the inline view pt?

Nokia N8 does not support DTMF ! Can this be fixed...

Similar Messages

Maybe you are looking for