Nokia N8.. I am going to wait some time
Hey guys,
Not really complaining about anything here. I own a Nokia 5800 XM which I was today considering to sell and get me a brand new N8 but after a little home-work I came to realize that there's lots of people around here reporting problems of dead phones, being replaced by Nokia Care for another phone dying in a few days.
I think I'm not willing to take the chances of getting a defective phone so I'm going to wait some more (new firmware updates) and maybe then get the N8 or something else depending on the market.
My 5800 XM hasn't been without faults (charging socket started to fall off in just a few months and had to be totally replaced.. sometimes it restarts...) but it has never become a dead brick. To me, this is simply not acceptable and the number of complaints about this issue around are far too high I think.
I've had other pieces of hardware equipment which have been labelled as rushed into the market but I've never seen such a big number of unfixable issue reports on an online forum.
As some people sair, most users who write here are writing to complain so it's obvious that the overal feeling is negative whilst the happy users never write on support forums but again, even on other equipment forums (not just phones, but anything electronic) I have never seen such a recurrent issue being raised.
Just my thoughts... peace to you all
In every ways of life there are Pros and Cons.. If you buy the Nokia N8 now you can show off to your friends.. but wait and you may get a phone with lesser no. of bugs at may be a much cheaper price... Though BAD LUCK can play its part any time...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...
Similar Messages
-
T500 turns off after cpu goes 100% for some time
I welcome all useful feedback on the issue - please do test your laptops if you can
my T500 turns off after cpu goes 100% for some time, that is just another issue?
happens both in windows and linux
edit : it cannot be from dust - I remember this happened occasionally even it was brand newThis makes the fourth post to say: CLEAN OUT YOUR FAN.
So...
CLEAN OUT YOUR FAN.
Some compressed air does the trick. You can find the disassembly instructions here:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70068.html
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Sun One Web Server connection pool goes stale after some time
Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance. -
Hi everyone!
I have a program in java that starts a VPN client and then I make some work using that client. The problem is that connecting to the client takes some time and I don't know how to wait until the client has been started. What happens is that the work I must do using the client executes before I am totally connected, therefore I don't get the work done properly.
I start the client using a Runtime.getRuntime.exec(command). I tried to use waitfor(), but it does not work because the connection to the client never finishes. When it finally got connected, it waits until the connection is finished, therefore I can't wait until the command has been executed.
Can you help me?
Thank youForget about having to wait, that was my first idea about why it was not working and when I wrote this post. Then I said to myself, let's open the console when it tries to start the client and maybe I see why it is not connecting (that's when I started to use the cmd /c start). What happened is that it successfully connected and everything worked perfectly when I was opening the console (using cmd /c start). Therefore, I figured out that the error was not that I had to wait. Now what I am asking is: why if I use cmd /c start, it connects to the VPN without problems but if I don't use it, it never connects but gets stuck (as if it was in an infinite loop, never gets connected).
I hope now you understand the problem and sorry for the miswritten. Maybe I should write a new thread asking for this new problem since the question has changed. -
If a HTTPRequest is going to take some time to get response
It is like an export process (exporting database-tables data into a text file). Depending upon the selection criteria, this might take a while sometimes.
1. Users want to see some progress bar.
Is this possible in a web application?
2. If we are not giving continual/dynamic progress bar, user does not want stay waiting on this page, without knowing what is happening at the server, where they can just proceed with other processes/links while this process is running. For this option, I was thinking of opening a new HTTP window just to show a static message like "Export Process in Progress" and once the process is done, the response will change the message to "Complete".
Is there any other solution to this?
I would like to have some of your suggestions.
Thanks in advance for your time.Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
Already i reset network settings for two times. -
Oracle 10G Db Starts-up After Server Reboot, BUT Goes DOWN After Some Time
Hi All,
I am really puzzled over this one. I have couple of servers running DB on them and I have used scripts to auto-enable them when server(s) reboot.
But there is one server where I see this funny behavior.
The DB comes-up after server reboot.
I can verify that in the startup logs and some more logs that I created.
I can see that LISTENER is able to communicate also.
But after a while, the DB shuts-down....!!
I have checked all the places I could. I have also tried to see the difference between this server and others (I did not install this one), but can not see any difference.
Is there anyway to find out (log) what is shutting down the DB??
Any help will be much appreciated as I am at my wits end.
Following is snap-shot from my logs:
Fri Mar 16 20:42:29 EDT 2007
Running dbstart.
Done with starting all, let's check status...
Fri Mar 16 20:42:42 EDT 2007
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 20:42:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date 16-MAR-2007 00:46:56
Uptime 0 days 19 hr. 55 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/product/10.2.0/Db_1/network/admin/listener.ora
Listener Log File /oracle/product/10.2.0/Db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.103.253.50)(PORT=1521)))
Services Summary...
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
Current Status:
# date
Fri Mar 16 21:30:40 EDT 2007
# su - oracle -c "lsnrctl status"
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:30:53
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.103.253.50)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refusedI was just looking at that.. Thanks for the tip.
Following is what I see. But not sure what does it tell me?? Please help......
From alert_orcl.log:
<snip>
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Mar 16 20:42:41 2007
Errors in file /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Fri Mar 16 20:42:42 2007
Completed: ALTER DATABASE OPEN
From /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
# cat /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
/oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
ORACLE_HOME = /oracle/product/10.2.0/Db_1
System name: SunOS
Node name: gcars0j6
Release: 5.10
Version: Generic_118833-24
Machine: sun4u
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 7700, image: oracle@gcars0j6 (TNS V1-V3)
*** SERVICE NAME:() 2007-03-16 20:42:37.548
*** SESSION ID:(159.3) 2007-03-16 20:42:37.548
Thread 1 checkpoint: logseq 255, block 2, scn 8602014
cache-low rba: logseq 255, block 3
on-disk rba: logseq 255, block 767, scn 8602399
start recovery at logseq 255, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 382Kb in 0.16s => 2.33 Mb/sec
Total physical reads: 4096Kb
Longest record: 3Kb, moves: 0/1066 (0%)
Change moves: 1/8 (12%), moved: 0Mb
Longest LWN: 308Kb, moves: 0/29 (0%), moved: 0Mb
Last redo scn: 0x0000.0083431e (8602398)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 149/149 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 1925/2083 = 0.9
*** 2007-03-16 20:42:37.702
KCRA: start recovery claims for 149 data blocks
*** 2007-03-16 20:42:37.705
KCRA: blocks processed = 149/149, claimed = 149, eliminated = 0
*** 2007-03-16 20:42:37.706
Recovery of Online Redo Log: Thread 1 Group 2 Seq 255 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 149/149 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 2054/2074 = 1.0
Error in executing triggers on database startup
*** 2007-03-16 20:42:41.963
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15 -
Ipad does not start. logo appears but goes off after some time.
I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.
I have ipad 3 which is upgraded upto date. I have charged it overnight, still it is not starting. Logo appears but goes off after 2 minutes. please help.
-
Last night I had to do a hard close on my IPAD. All that is happening, even this morning, is a revolving circle in the middle of my IPAD. What can I do?
I'm not quite sure what you mean about a hard close but if you haven't done this - try it. Hold down on the sleep and the home button at the same time for about 10-15 seconds until the Apple logo appears on the screen - ignore the red slider - let go of the buttons. See if it restarts now.
-
This has been going on for some time.
this is getting very frusturating. i've tried everything, even "restoring iPod to factory settings"
I put a CD in that I would like on my iPod, i import it to my iTunes, but then it takes another CD out of my iTunes & off my iPod!
My iPod always has around 50 songs due to this. I don't know why it does that, I have more than 80% of its free space left!
My sister got the new video iPod over the summer, but it didn't work on our computer, thats when this all started.
I've also tried downloading the new version of iTunes, but it won't let me!
I'm getting very irritated, please help.If you are really running Windows 98 you can't be running iTunes.
If you are importing songs from your CD into your iTunes library, syncing them to your iPod, and then deleting them from your iTunes library it will always remove the songs the next time you connect your iPod. If you don't want to do this set up your iPod to manually manage your music and then manually drag songs to your iPod.
To set it to manually manage your music connect it to your computer. In iTunes select your iPod under the Devices section on the frame to the far left of your screen. Move to the right and select the Summary Tab. Scroll down and you will see an Options section. Tick the box for manually manage your music then click Apply.
You will need to manually eject your iPod when you are through dragging songs to it. -
MacBook Pro (retina display)screen going black after some time.
Hi, I bought my macbook pro 13" (retina display) a week ago. I haven't configured the screen saver yet but today when I was using the apple tv to watch a movie already on my macbook hard disk the screen went black but when I touched the trackpad it came back but the Airplay would get disconnted.
Set the display to not sleep when watching movies.
Open System Preferences > Energy Saver -
How to automaticallly operate a command by wait some times
Hi
i have post this question, but i think i did not describr clearly, in this control interface.VI , i have design the dispense pressure and dispense time. once i press the dispense button i want to achieve that after the operation dispense, it can automatically dispense several times without press the dispense button, anyone can help me?
Attachments:
control interface for musashi unit.vi 12 KBPlease stick to your original post. You do not have to create a new thread just to provide a better explanation of what you are trying to do. People are already helping you in that thread, so please be patient, as most folks here are volunteers who have full-time jobs and cannot answer questions on an immediate basis.
-
Not able to connect to portal / MDM after some time
Hi, I am displaying some data in Portal from MDM. The connection goes successful for some time after that , connection hangs. The flow come till
ExecuteMatchingStrategyCommand executeMatchingStrgyCom = new ExecuteMatchingStrategyCommand(objcon.connections);
and fails.
Could you kindly help me in resolving the issue?HI Prabhumsundar
This hanging while running the matching stratergy code happens when MDM has a very huge number of record and the matching stratergy is trying to return all the values in MDM.(Which means all the records satisfy the matching stratergy).
This causes the MDM Server to crash. To resolve this make the matching stratergy robust. -
Hi all,
I am using project server 2007 in virtual environment. Before some time, my project server queue service was not starting & it gave Error: 1053. Then server team made some small changes in registry & resolved the problem. After that queue service
was in running condition. But when any job goes into queue, it processed the job first, then after some processing, it goes into "waiting to be processed", and after some time it again starts processing. So, the project server queue is working very
very slow. I restarted queue, event, sql, timer services, but no benefit.
In log it is showing "Queue unable to interact with SQL.".
Please Help....
Thanks.
Thanks & Regards Pradeep GangwarHi Hrishi,
ULS log is as below:
===========================================================
02/12/2013 10:19:20.99 OWSTIMER.EXE (0x0460)
0x089C
Windows SharePoint Services Timer
5uuf Monitorable
The previous instance of the timer job 'Shared Services Provider Synchronizing Job', id '{AD482C7A-A6D5-4313-A4B6-3F5A78730F61}' for service '{54B6D7E9-6F24-459E-92AC-E11FB157B119}' is still running, so the current instance will be skipped. Consider
increasing the interval between jobs.
02/12/2013 10:20:10.58 w3wp.exe (0x04C0)
0x13FC
Windows SharePoint Services General
8m90 Medium
105 heaps created, above warning threshold of 32. Check for excessive SPWeb or SPSite usage.
02/12/2013 10:20:29.99 OWSTIMER.EXE (0x0460)
0x089C
Windows SharePoint Services Timer
5uuf Monitorable
The previous instance of the timer job 'Config Refresh', id '{5BA90EA2-D960-4F00-BF99-2C9C96056FB1}' for service '{46CB2006-65AC-40C6-9B5D-E2924F18B8CD}' is still running, so the current instance will be skipped. Consider increasing the interval
between jobs.
==========================================================
And in Event Viewer, it is showing:
==========================================================
Log Name: Application
Source: Office SharePoint Server
Date: 12-02-2013 10:14:02
Event ID: 7761
Task Category: Project Server Queue
Level: Error
Keywords: Classic
User: N/A
Computer: xyz
Description:
Standard Information:PSI Entry Point:
Project User: domain\epmadmin
Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
PWA Site URL: http://xyz/PWA
SSP Name: SharedServices1
PSError: Success (0)
An unxpected exception occurred in the Project Server Queue. Queue type (Project Queue/Timesheet Queue): ProjectQ. Exception details: CompleteGroup failed.
===========================================================================================================================================================
Log Name: Application
Source: Office SharePoint Server
Date: 12-02-2013 10:14:02
Event ID: 7758
Task Category: Project Server Queue
Level: Error
Keywords: Classic
User: N/A
Computer: xyz
Description:
Standard Information:PSI Entry Point:
Project User: domain\epmadmin
Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
PWA Site URL: http://xyz/PWA
SSP Name: SharedServices1
PSError: Success (0)
Queue SQL call failed. Error: System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
Cannot insert duplicate key in object 'dbo.MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
===========================================================================================================================================================
Log Name: Application
Source: Office SharePoint Server
Date: 12-02-2013 10:14:02
Event ID: 7754
Task Category: Project Server Queue
Level: Error
Keywords: Classic
User: N/A
Computer: xyz
Description:
Standard Information:PSI Entry Point:
Project User: domain\epmadmin
Correlation Id: a5e020df-ee43-417f-b47c-a1f1142fe2cf
PWA Site URL: http://xyz/PWA
SSP Name: SharedServices1
PSError: Success (0)
Queue unable to interact with SQL. Queue type (Project Queue, Timesheet Queue etc):
ProjectQ Exception: Microsoft.Office.Project.Server.BusinessLayer.Queue.QueueSqlException: CompleteGroup failed --->
System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
Cannot insert duplicate key in object 'dbo.MSP_QUEUE_PROJECT_GROUP_ARCHIVE'.
==========================================================
Thanks & Regards Pradeep Gangwar -
I have iPhone 4s, and using latest iOS. When I try to open any link from Twitter or Facebook, it goes to open some wrong webpage. My iphone seems to be infected or suffering from some spyware or malware. How can I remove this wrong link opening ? Please help me to resolve...
I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/ -
i spend a long time to try to sync my itunes music on my ipod 160 GB Classic, but after waiting so long get a pop up message that itunes stop syncing because of error 46, some times giving me 58, 1469, and many other numbers, please help am using macbook pro
That is precisely what my mid-2010 MacBoook Pro 13 was doing before the drive finally died after an Apple Genius rebooted it a dozen or so times. I have since read about the exact same thing happening to others, including a writer for The Atlantic magazine who had never had an issue with a Mac before. Do a back-up ASAP to make sure you don't lose anything and see about replacing the HDD. It is only about $140 for a new drive. The real issue is if you lose your data, too. So, make sure you do that back-up!
Maybe you are looking for
-
I want to update my ipad 2 to ios 5.0.1 but only ios 6.1 available in itunes
I just purchased an IPAD 2 64GB 3G and would like to upgrade from iOS 4.3.3 to iOS 5.0.1. In iTunes only upgrade to version 6.1 is available.
-
Send Purchase Order IDOC to create Sales Order in other R3 system
Hi everybody, I need to setup our R3 system so that when one user creates a Purchase Order in the R3, an ORDERS idoc is sent to another R3 system in order to create the related Sales Order (we have 2 R3 systems to support the business of 2 different
-
Existing CC subscriber. Planning to reinstall OS. How do I reinstall CC?
I've bee a CC subscriber for a while and want to do a clean reinstall of my OS. How do I download and reinstall CC since all files will be deleted and there is no physical copy of the program? Do I need to deactivate first? Thanks for any advice, Tim
-
How to convert a STRING to URL?
as i know, URL to string we just need toString() method... but how abt String to URL.. i cant find any toURL() method... pls help..! thanks
-
Some artists won't show on 30 gb ipod video.
The last few artists on my ipod like zz top and those down there show up on my ipod when hooked up but not when un-hooked. Answers are appreciated.