Nokia N8 says "conn. failed conn. unavailable" eve...

My Nokia N8 says "conn. failed conn. unavailable" twice in popup like baloon every one or two minutes and this happens after and before usb connection also.
It takes a big resource and I cannot watch video, capture video/voice and even type an SMS because everytime it appears phone stops responding to my touches and this is absolutely annoying.
I tried these ways to solve it :
1) connected the phone to Nokia configuration tool to manage/delete every single access points
2) tried to install newer Ovi support software but the Ovi suite says it is up to date
3) tried to uninstall the Ovi and Ovi store apps on my phone but I get "removing cancelled", it seems they're built in !!!
4) I read every posts about rebooting in offline and rebooting without sim card
5) I changed the connection settings to "always ask"
but unfortunately no success
I know how to reset my phone via 3buttons and *#7370# code but I'm not gonna do it for every error I get in new Symbian^3 because I have plenty of softwares and I don't have much time to install and configure them
Somebody please help me to handle this error which is really really bothering me.
Thanks in advance
Solved!
Go to Solution.

I have just bought a N8 and I had the same problem... I solved it by going to settings/ connectivity/ settings/ network destinations and deleting all the access points from each connection folder (do this by pressing on the connection folder, for example 'internet' then delete the destinations by holding your finger down on them til the menu appears then select delete) I deleted the whole lot, then sent a text to my mobile network (o2) to resend me the net settings, I saved them from the text and when I went back to the destinations list (as above) I found the phone had put the settings from o2 into another destination folder called 'uncategorised'. I think the problem with symbian is that it was causing the destinations in the 'internet' folder to conflict with the destinations in 'uncategorised', so because I had erased the settings from 'internet'', all I had to do was move the destinations from 'uncategorised' to 'internet', which means the uncategorised folder had to be deleted, but now because my phone is doing everything from just the 'internet' folder, theres no confusion, and I havent had that 'connection error' message since

Similar Messages

  • N8 "conn. failed conn. unavailable"

    Hi I have a problem with my N8 O2 UK Gray, latest SW (14.002)
    I had faulty flash and had it repired via nokia tech support.
    Letter says they've fixed flash and reinstalled software.
    When I received the phone first thing was updating few apps, including Ovi Store. At that point it all seemed ok, even though Ovi wouldnt update due to some error, but it did go online and downloaded data. Next thing was restoring all backup data, and from this point my N8 wouldnt go online no matter which connection I used, either cellular network and wifi. Just after starting connection popup b'loon says "conn. failed conn. unavailable" and does this to all access points I have stored.
    I have tried both soft & hard reset (may even be 10 times so far), reinstalling software using NSU and Ovi Suite and still getting nowhere. To my knowledge only thing left is "Three Fingerz" method, but dont think its gonna help and I dont want to wipe half of programs preinstalled...
    Anyone had similar problem? I have repair booked already, but Im afraid its gonna be sending the phone away again and again (when I restore backup again).
    Plz help

    Hi I have a similar prob with my E7. Seems to be common. There should be access points in the INTERNET section. Some software is trying to connect to internet
    Go to - MENU-SETTINGS-CONNECTIVITY-SETTINGS-DESTINATIONS.  and inside DESTINATIONS you will see INTERNET. Create access point in this INTERNET folder. For me its working fine.

  • N8 Connection failed / Connection unavailable for ...

    My N8 C: was always running out of memory so I thought of doing a Hard Reset.
    I backed up data, Hard Reset(wipes off all memory), Restored.
    Now I am able to find my WiFi hotspot but not able to connect, it says Connection failed / Connection unavailable.
    WiFi hotspot is created using Nokia E72 JoikuSpot which worked smoothly prior to Hard Reset but not now. My other devices are still able to connect to the hotspot so everything is fine at Joiku in E72.
    I have tried Soft Reset, Hard Reset of my N8 and even deleting the HotSpot from saved connection & then re-saving it.
    Pls advise.
    Using Nokia Lumia 1320.
    Also have Nokia E72 & Nokia N8.

    Replying for an update because i had this problem, fixed, but have it again:
    Well I did about a month ago i had the same problem with the mobile data saying connection failed. I did the soft restand then hard reset, but then still had the issue. I deleted all the access points and then took out the sim card. Put the sim card back in and then had to manually setup my access point.
    That worked, not sure if it was one specific thing or the whole combination.
    but now the same problem is back, the mobile data not working and saying connection failed/connection unavailable. Cannot get it fixed no matter what i try so far (tried resets, manually inputting apn settings again, etc)
    my wifi works by the way.
    Did you find a fix or does anyone have any suggestions?

  • Nokia 701 WLAN connection failed

    Hi,
    I bought a Nokia 701 and its not connecting to any WLANs at all. It shows the available SSIDs but when I click on something, it says, Connection failed Connection unavailable
    Please help.
    Dinesh
    Solved!
    Go to Solution.

    after i install the new software version 111.030.0609.C00.01, i cannot even connect to the internet or even connect to any WIFI signal, I was told by Nokia Care, its software its very unstable and i have to wait till the next update is available to solve this matter, is that correct, how long more do i have to wait.
    Can Nokia give us two years warranty, due to frustration cause by Nokia software problems.
    My WLAN also always gets Connection failed after i install the new update.
    can anyone help me,
    Reuben - 
    Moderators notes: Personal email removed. 

  • Error in Webservice Call HTTP error (return code 404, message conn failed)

    Hi
    We wish to call  a standard EP7 webservice through ABAP.
    When we try to create consumer proxy , we get the following error.
    HTTP error (return code 404, message "conn failed")
    Message no. SPRX090
    ==> Display Error Document
    If you want to generate a proxy for an external WSDL document by specifying a URL, check that the proxy settings of the system are correct (transaction SICF - Client - Proxy Settings). If you want to generate a proxy for an XI Repository object, check the connection to the Enterprise Services Builder as follows:
    Check List for Setting Up a Connection to the Service Repository
    1. The address of the Enterprise Services Repository must be known in the SAP system
    Check with report SPROX_CHECK_IFR_ADDRESS
    The address is taken from the following parameters in the exchange profile ('Connections' section):
    com.sap.aii.connect.repository.name: Server (for example,pwdf0436)
    com.sap.aii.connect.repository.httpport: Port (for example, 1080)
    com.sap.aii.connect.repository.contextroot: Root (for example,rep)
    The logon data is also read from the exchange profile ('ApplicationSystem' section):
    com.sap.aii.applicationsystem.serviceuser.name: User
    com.sap.aii.applicationsystem.serviceuser.pwd: Password
    As an alternative to using the exchange profile, you can maintain the RFC destination SAP_PROXY_ESR. If this RFC destination is maintained it will be used by the proxy generation in place of data from the exchange profile to access the Service Repository. In this case, the Exchange Profile will even not be read.
    The RFC destination has to be set up using transaction SM59 and should look like this:
    RFC Destination: SAP_PROXY_ESR
    Connection Type: G (HTTP Connection to External Serv)
    Description1: ESR for Proxy Generation
    Target Host: esr_host
    Service No: 1080
    Path Prefix: rep
    Logon and Security:
    Basic Authentication: active
    User: esr_user
    Password: esr_password
    2. The HTTP Framework of the Web Application Server must function
    Check with report SPROX_CHECK_HTTP_COMMUNICATION
    If necessary, contact your system administrator. Please be aware of the fact, that the HTTP framework is depending on the application server. Thus the result of the report may differ for different application servers.
    3. Proxy generation must interpret the data of the Enterprise Services Repository correctly
    Check with report SPROX_CHECK_IFR_RESPONSE
    you can also login in dev and go to Xn se91
    enter msg id SPRX and msg no 090
    select the message and click on long text..
    you get the same message in a formatted manner..
    How to get rid of this ?
    Regards
    Rajendra

    Hi
    we have given the correct path as we have tested the webserive from
    other technology (.net) by providing the same path.
    regards
    Rajendra

  • Nokia suit update sevice is currently unavailable

    when i try upgrading my C7, the nokia suit says it's update service is currently unavailable even after 3 days and after updating it to nokia suit v.3.3.86

    Hi all, few comments:
    - first, make sure that you have latest Nokia Suite installed and in use (you can see version number in top right corner of Nokia Suite)
    - check, that Nokia Belle update is available for your product code (you can find list from here: http://europe.nokia.com/find-products/nokia-belle-update/nokia-belle-update-availability) 
    - In Nokia Suite, it's recommended to have Tools -> Options "Automatically download software updates" turned on (this way Nokia Suite downloads update packages in background to your PC, so update experience is smoother)
    - Additionally, make sure, that if you have any firewall software in your PC, that Nokia Suite is allowed to connect to internet
    - Additionally, you can in Nokia Suite Tools -> Software updates click "Refresh", then Nokia Suite checks for latest information from Nokia's server
    Cheers,
    Marina
    Nokia Suite team
    Click on the Star Icon below if my advice has helped you!

  • 808 - Connection failed Connection unavailable mes...

    I just received my 808 replaced by Nokia for the 3G bug issue. Now I have been noticing that annoying Connection Failed connection unavailable message every few seconds. Turned the positioning methods OFF and the frequency of the error message goes away but it still pops up every few minutes. I did a hard reset, removed the memory card where most of my apps are installed and it still gives me that same error. Ordered a new SIM to see if that makes any difference - none - Still same error message. That message is so annoying. Anyone have any other ideas that I could try ? Privacy mode is OFF also.

    geeknc wrote:
    I just received my 808 replaced by Nokia for the 3G bug issue. Now I have been noticing that annoying Connection Failed connection unavailable message every few seconds. Turned the positioning methods OFF and the frequency of the error message goes away but it still pops up every few minutes. I did a hard reset, removed the memory card where most of my apps are installed and it still gives me that same error. Ordered a new SIM to see if that makes any difference - none - Still same error message. That message is so annoying. Anyone have any other ideas that I could try ? Privacy mode is OFF also.
    Have you assigned a data connection preference for browser and other apps requiring data ?

  • Get_ldapmessage_controls failed: 12 (Unavailable critical extension) (op=Ab

    I'm running iPlanet Directory Server 5.1 SP3. I have a W2K consumer and a HPUNIX 11.0 supplier/hub. I keep getting this message in the W2K instance's error's log. Replication is not in sync.
    In the Supplier hub's errors log I"m getting the following error:
    [13/Jun/2005:02:21:15 -0400] - synchronize(repl_bind error)
    [13/Jun/2005:10:57:27 -0400] - Error: repl_bind: slapd_SSL_client_bind_s failed: Can't contact LDAP server (81) err 0
    Could someone please point me in the right direction on this? BTW, I work for an enormous corporation that moves real slow, so please don't come back to me with, "well, have you thought about upgrading to SP4 or SunOne 5.2?" I swear if I hear that again I'm going to go insane.
    I have no say on what we run around here. I'm only an administrator in training.
    Thanks.

    Sorry, this is the full error I'm getting on the W2K box.
    get_ldapmessage_controls failed: 12 (Unavailable critical extension) (op=Abandon)

  • When I try to download iOS 6 to my iPhone 4 it says " Verification Failed. Request has timed out". What do I do?

    How to download iOS 6 on iPhone 4??. Keeps saying "verification fAiled. Request has timed out"

    Try try again. Thre server are heavily loaded. The connection dropped becasue the computer thinks it waited to long. Disabling your security software on the computer can help resolve this too.

  • I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

    I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

    try general>settings>reset>reset all settings and start up as an new phone.

  • TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

    i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

    Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
    Make sure the Firewall is turned off.

  • HT1199 I updated Itunes on my PC and now when i try to open Itunes i get a error message saying "application failed to start because MSVCR80 was not found" then whenI close that pop up I get a error message saying "windows was not installed correctly Erro

    I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found"  When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126.  My PC is a Acer and I'm running Windows Visa.  I tried to uninstall Itunes and reinstall it and get same message.  Can anyone help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99659)

  • After the update to Android 5.0.1 my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002)

    After the update to Android 5.0.1 on my Galaxy Note 4, my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002). I am glad it was a free app I was trying to install (I tried a couple of different ones to see if it was just a bad app and they all failed on the install. The Note 4 and the Gear S seem to be communicating okay via bluetooth (health stuff syncs, Gear S controls the music player on the note 4 Etc. )

    Everything that I had installed previously on the gear S still works.
    Everthing while in the gear manager seems to be working okay also. I can make changes in the Gear manager on the note 4 and they show up on the gear S. I have an app called watch styler , it let me create a new watch on the Note 4 and that showed up on the Gear S.
    The only thing that seems to be not working is installing new apps.
    When trying to get a new app it looks like it is working as normal , the dowload shows it is working but it errors out when it goes to install it.
    REPLY SEPARATOR ***********

  • Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.

    Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.

    Make sure you are running as the Administrator of the Account.
    Also...  See this User Tip by turingtest2
    Troubleshooting issues with iTunes for Windows updates

  • After updating my 3gs to ios 5.0.1, I can not restore my phone from my pc. It says session failed. It appears to be a backup available.

    After updating my 3gs to ios5.0.1, I can not restore my phone. It says session failed after about 20 seconds. It appears to be a restore point available. What should I do?

    Hi all,
    I work for an Enterprise with around 30 devices so far, 5 of them have been upgraded to iOS 5.01 and we are having this issue, the steps below are appearing, these are both on iphone and ipad 2's with exchange 2003:-
    - Exchange Calendars not sync'ing, but Yahoo account working fine.
    - Create an appointment on the ipad / iphone and this sync's with Exchange.
    - Close the Calendar and re-open the appointment disappears, but stay's within Exchange.
    - Meetings created within the Exchange Calendar do not synch with the iphone / ipad.
    This is starting to cause a lot of issues.
    Thanks
    Keith

Maybe you are looking for

  • Won't recognize my itunes login

    I have a MAC, Ipod touch and just purchased Apple TV.  My internet is through Frontier.  I've had problems trying to get programs to work through my internet at home.  For instance, I had my gmail & yahoo email addresses set up on my I Pod Touch and

  • How to create a $ per second report.

    I have a scenario where I have several stores all posting sales in real time to a BAM object. The Fileds are: StoreID "string" PurchaseDate "datetime" PurchaseAmount "integer" I like to create a report that will display the sales per second for a giv

  • How to Determine if parameter is in a Parameter List?

    Hi all, I have to write a procedure to be used by both Designer Generated Forms and hand coded forms to handle navigation buttons. The procedure so far looks like: procedure proc_nav_call_form (p_form_name in varchar2, p_param_list in paramlist) is b

  • Screen GUI Status Query ( ALV Grid)

    Hi All, I am having an ALV grid on a screen . I want to check the contents of the grid at the press of enter button, at present i have to press the check button available on the ALV grid to check the contents of the grid. Pls suggest

  • Duplicates appearing in a bogus location

    Lots of duplicate songs. One song plays and the other does not. When I check location, it says the location for the non-playing song is c://filehost/E: which is my cd player.  What is the best technique to get rid of the dupes?