Nokia N8 unable to add mailbox, anyone facing this...

Nokia N8 unable to add mailbox, anyone facing this issue?
It prompt add mailbox but without option to let us choose either ovi mail, hotmail, yahoo mail, or other (like what we usually have), I just able to key in mail address & password, after click tick then exit. No mail added.
Please help!!
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

It usually means that you don't have any SIM card inserted and mobile data or wlan connection available. The email app goes online to download a list of available email services for your country. If it can't go online then it just presents the options you mention.

Similar Messages

  • After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?

    After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?

    for ipad,
    if you go to settings-General
    You can select between using the side switch to lock rotation or mute.  If you select one mute, then the lock rotation icon will show up in the control center.  If you select lock rotation, then the mute will show up.  THe side switch is then used for the other option.

  • Sales order number range skipping..anyone faced this ????

    Hi all ,
    We have perculiar problem where Sales order document numbers are
    skipping/ jumping inbetween around 200- 250. And it is recurring.
    Anyone faced this problem ? Does any one has any clue on this ?
    we are in ECC 5.0
    Thanks in advance.
    Kb

    This is happening due to buffering in number range. If you write the same to SAP OSS, they will let tou know the note no to be refered to, which will resolve the problem.
    Regards,
    Rajesh Banka

  • I cant connect to the itunes store and the support team didnt really help anyone facing this issue with ipad mini!!! I need help

    I cant connect to the itunes store and the support team didnt really help anyone facing this issue with ipad mini!!! I need help

    Here's the troubleshooter.
    Can't connect to the iTunes Store

  • I have paid for the Mountain Lion. But for some reason, I cannot seem to download it, despite software being upgraded. Anyone facing this problem where the download does not begin? How can I solve this?

    I have paid for the Mountain Lion. But for some reason, I cannot seem to download it, despite software being upgraded. Anyone facing this problem where the download does not begin? How can I solve this?

    Make sure your Mac qualifies to run Mountain Lion >  Apple - Upgrade your Mac to OS X Mountain Lion.
    Try disabling anti virus software and turn off the Firewall in System Preferencs > Security & Privacy
    Apps such as Little Snitch and Net Nanny can prevent apps from downloading from the App store including Mountain Lion.
    Third party download managers are not compatible with the App Store.
    Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

  • While making or disconnecting the calls, signals disappear and phone become unreachable, has anyone faced this issue or any resolution to it ?

    While making or disconnecting the calls, signals disappear and phone become unreachable, has anyone faced this issue or any resolution to it ?

    Boot on safe mode and check again 
    http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • I just bought IPad mini 16Gb 4G, bundled 1A adaptor can only charge to 90% of battery, only be able to fully charge using 2.1A adaptor. Anyone facing this?

    I just bought IPAD mini with 16GB with LTE, I can only charge up to 90% with the bundled 1A adaptor, it will go full charge only with 2.1A adaptor. Anyone facing similar problem?

    The same problem. The same solution.

  • Nokia N96 - Do anyone facing this issue with Softw...

    Hi guys,
    Hope someone can help on this issue.
    After my N96 update to software version 12.043.009.1 RM-247 and my phone have a new issue that it happen very frequent that is my LCD back light is turn off and not wouldn't turn on anymore.:robotsad:
    First I set my phone into "Power Saving" mode
    Try to run some software like
    Web (Nokia)
    Mini Opera (Opera)
    Music Player (Nokia)
    Google Map (Google)
    The LCD back light will turn off after awhile if the keypad not active more 10 seconds and I press on the keypad and the LCD back light will turn on again and repeat this and somehow the LCD back will turn off and not turn on anymore. I try to turn off the my phone but it will not totally turn off and the Music Player keys is ON for forever and the phone can not turn on anymore.
    I have to remove the battery and put in again and everything just back to normal.
    May be someone just have the same issue as me or someone have the answer ? 
    Thank you
    Regards
    Han 

    hiya guys,, i am having a problem with my screen backlight on my nokia n96 have had 2 brand new ones within 4 days of eachother,, when i slide the phone open the backlight only works sometimes !!!! been told by vodafone that every n96 has this problem with no software update avaliable which is nice to be told after you have already taken out a £40 per month contract if anyone has any ideas how to sort this please reply,,, thanks Aiden

  • Lion Mail search: 'All' search missing some mailboxes - anyone seen this?

    Yet another Mail search issue in Lion - at least I have not seen this one documented before.
    Noticed in searching Mail after move from Snow Leopard to Lion: a search on 'All' mailboxes misses items that are present in one particular (very large) mailbox, although a search on that mailbox alone finds them.  Because we have two Macs, one already migrated to Lion, the other still with Snow Leopard, we can see that a search in SN finds everything whereas the Lion search does not.
    But there's more: a possible explanation occurred to us: the 'missing' mailbox was titled "INBOX"  (some levels down - comes from an Entourage archive).  Renamed that OLD INBOX, and results started coming up (with 'All' mailboxes selected) including its contents.
    However: changing the search string to different senders produced inconsistent results.  Use one name, that person's incoming mail in that folder showed up with search set to 'All'.  Change to another sender, still no results from that mailbox, even tho' (as ever) the messages showed up when the search was restricted to that mailbox.
    All very confusing!
    What's going on?
    Thanks.

    Seems to work here ok:

  • Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • Music - "Unable to Add" Error - NOKIA C7 (ANNA)

    Thru the New Nokia Suite - 3.2.100 I'm unable to add music from my PC to the suite. The older version had no issues like this one. Music could be added to the suite and then saved to the phone. This one is not allowing to do so.

    if you just want to add music file, you don't have to use Nokia suite at all. after conecting the USB cable (or bluetooth connection), to select the "mass storage" mode in the phone side, then, PC will regard your phone as one removable disk, just copy your favorite file to your C7, it's very easy!
    Good luck!
    if this answer is helpful for solving your issue, pls press the white star, thanks!

  • Unable to add/remove users in Mountain Lion Server (Options are greyed out)

    For some reason, im unable to add/remove users in Mountain Lion server. The + and - are greyed out. It seems like something is wrong with the permissons because it looks like it cant write the the Ldav3 file (although that may be speculation). Does anyone have any advice for me? I URGENTLY need to add users.
    Maybe theres a way to restore default permssions for the boot drive (if that in fact is the issue). Hopefully there is a way that I can fix this while leaving all users, groups, their permissions and shares intact.

    Anything interesting and relevent in the server logs?
    Anything interesting in the server alerts?
    Since it's far and away the most common cause of problems with OS X Server and with distributed authentication (Open Directory is entirely based on network encryption and digital certificates and on responses from your local DNS server(s)), verify your local DNS configuration is working and requires no changes with the following Terminal.app (Applications > Utilities) harmless, diagnostic command:
    sudo changeip -checkhostname
    sudo requires an administrative password.  You might get a one-time warning about the sudo, and that can safely be ignored.  The command will display some details, and indicate whether the local configuration appears valid and no changes are required, or further diagnostics for (most) common errors that can arise.

  • Cisco ASA 5505 VPN connection issue ("Unable to add route")

    I'm trying to get IPSec VPN working onto a new Cisco ASA5505. Pretty standard configuration.
    Setup:
    * Cisco VPN client on Windows 7 (v5.0.07.0290 x64 on Laptop1 and v5.0.07.0440 x64 on Laptop2)
    * PPPoE/NAT and internal DHCP on the ASA were configured with the Startup Wizard in ASDM
    NATting is working fine - internal PCs get an IP address in the 192.168.2.0/24 range and can all access the Internet.
    I wanted to be able to connect from anywhere to the ASA in order to reach one of the internal servers. Should be pretty basic.
    First I tried with the built-in ASDM IPSec Wizard, instructions found here.
    VPN clients can connect to the ASA, are connected (until they're manually disconnected), but cannot reach the internal network nor the Internet. Note VPN client can connect fine to a different VPN site (not administered by myself).
    Client logs show following error messages:
    1 15:53:09.363 02/11/12 Sev=Warning/3     IKE/0xA300005F
    Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
    2 15:53:13.593 02/11/12 Sev=Warning/2     CVPND/0xE3400013
    AddRoute failed to add a route with metric of 0: code 160
    Destination     192.168.1.255
    Netmask     255.255.255.255
    Gateway     172.16.1.1
    Interface     172.16.1.101
    3 15:53:13.593 02/11/12 Sev=Warning/2     CM/0xA3100024
    Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100165, Gateway: ac100101.
    4 15:54:30.425 02/11/12 Sev=Warning/2     CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
    5 15:54:31.433 02/11/12 Sev=Warning/2     CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
    6 15:54:32.445 02/11/12 Sev=Warning/2     CVPND/0xA3400015
    Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
    7 20:50:45.355 02/11/12 Sev=Warning/3     IKE/0xA300005F
    Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
    8 20:50:50.262 02/11/12 Sev=Warning/2     CVPND/0xE3400013
    AddRoute failed to add a route with metric of 0: code 160
    Destination     192.168.1.255
    Netmask     255.255.255.255
    Gateway     172.16.1.1
    Interface     172.16.1.100
    9 20:50:50.262 02/11/12 Sev=Warning/2     CM/0xA3100024
    Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100164, Gateway: ac100101.
    I've already tried the suggestions from this link, although the problem is different there (as the user can still access the internet, even without split tunneling, which I cannot).
    A show run shows the following output (note in the below I have tried a different VPN network: 192.168.3.0/24 instead of 172.16.1.0/24 seen in the Client log)
    Result of the command: "sh run"
    : Saved
    ASA Version 8.2(5)
    hostname AsaDWD
    enable password kLu0SYBETXUJHVHX encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.2.254 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    pppoe client vpdn group DW-VPDN
    ip address pppoe setroute
    ftp mode passive
    access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.240
    pager lines 24
    logging enable
    logging asdm informational
    mtu outside 1500
    mtu inside 1500
    ip local pool DWD-VPN-Pool 192.168.3.5-192.168.3.15 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 0 access-list inside_nat0_outbound
    nat (inside) 1 0.0.0.0 0.0.0.0
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 192.168.2.0 255.255.255.0 inside
    http 0.0.0.0 0.0.0.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    vpdn group DW-VPDN request dialout pppoe
    vpdn group DW-VPDN localname fa******@SKYNET
    vpdn group DW-VPDN ppp authentication pap
    vpdn username fa******@SKYNET password *****
    dhcpd auto_config outside
    dhcpd address 192.168.2.5-192.168.2.36 inside
    dhcpd domain DOMAIN interface inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    group-policy DWD internal
    group-policy DWD attributes
    vpn-tunnel-protocol IPSec
    username test password ******* encrypted privilege 0
    username test attributes
    vpn-group-policy DWD
    tunnel-group DWD type remote-access
    tunnel-group DWD general-attributes
    address-pool DWD-VPN-Pool
    default-group-policy DWD
    tunnel-group DWD ipsec-attributes
    pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
    message-length maximum client auto
    message-length maximum 512
    policy-map global_policy
    class inspection_default
    inspect dns preset_dns_map
    inspect ftp
    inspect h323 h225
    inspect h323 ras
    inspect rsh
    inspect rtsp
    inspect esmtp
    inspect sqlnet
    inspect skinny
    inspect sunrpc
    inspect xdmcp
    inspect sip
    inspect netbios
    inspect tftp
    inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:3e6c9478a1ee04ab2e1e1cabbeddc7f4
    : end
    I've installed everything using the CLI as well (after a factory reset). This however yielded exactl the same issue.
    Following commands have been entered:
    ip local pool vpnpool 172.16.1.100-172.16.1.199 mask 255.255.255.0
    username *** password ****
    isakmp policy 1 authentication pre-share
    isakmp policy 1 encryption 3des
    isakmp policy 1 hash sha
    isakmp policy 1 group 2
    isakmp policy 1 lifetime 43200
    isakmp enable outside
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto dynamic-map outside_dyn_map 10 set transform-set ESP-3DES-SHA
    crypto dynamic-map outside_dyn_map 10 set reverse-route
    crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 288000
    crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
    crypto map outside_map interface outside
    crypto isakmp nat-traversal
    sysopt connection permit-ipsec
    sysopt connection permit-vpn
    group-policy dwdvpn internal
    group-policy dwdvpn attributes
    vpn-tunnel-protocol IPSec
    default-domain value DWD
    tunnel-group dwdvpn type ipsec-ra
    tunnel-group dwdvpn ipsec-attributes
    pre-shared-key ****
    tunnel-group dwdvpn general-attributes
    authentication-server-group LOCAL
    default-group-policy dwdvpn
    Unfortunately I'm getting the same "AddRoute failed to add a route with metric of 0: code 160" error message.
    I'm very confused as this should be a pretty standard setup. I tried to follow the instructions on the Cisco site to the letter...
    The only "differences" in my setup are an internal network of 192.168.2.0 (with ASA IP address 192.168.2.254) and PPPoE with DHCP instead of no PPPoE at all.
    Does anyone know what's going on?

    Yes, I have tried from a different laptop - same results. Using that laptop I can connect to a different IPSec site without issues.
    Please find my renewed config below:
    DWD-ASA(config)# sh run: Saved:ASA Version 8.2(5) !hostname DWD-ASAenable password ******* encryptedpasswd ****** encryptednames!interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 !interface Vlan2 nameif outside security-level 0 pppoe client vpdn group DWD ip address pppoe setroute !ftp mode passiveaccess-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.224 pager lines 24logging asdm informationalmtu inside 1500mtu outside 1500ip local pool vpnpool 192.168.50.10-192.168.50.20 mask 255.255.255.0icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00timeout floating-conn 0:00:00dynamic-access-policy-record DfltAccessPolicyhttp server enablehttp 192.168.2.0 255.255.255.0 insidehttp 0.0.0.0 0.0.0.0 outsideno snmp-server locationno snmp-server contactsnmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAPcrypto map outside_map interface outsidecrypto isakmp enable outsidecrypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400telnet timeout 5ssh 0.0.0.0 0.0.0.0 outsidessh timeout 5console timeout 0vpdn group DWD request dialout pppoevpdn group DWD localname *****@SKYNETvpdn group DWD ppp authentication papvpdn username *****@SKYNET password ***** dhcpd auto_config outside!dhcpd address 192.168.2.10-192.168.2.40 insidedhcpd enable inside!threat-detection basic-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptwebvpn enable outside svc enablegroup-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpngroup-policy dwdipsec internalgroup-policy dwdipsec attributes vpn-tunnel-protocol IPSec default-domain value DWDDOMusername user1 password ***** encrypted privilege 0username user1 attributes vpn-group-policy dwdipsectunnel-group dwdipsec type remote-accesstunnel-group dwdipsec general-attributes address-pool vpnpool default-group-policy dwdipsectunnel-group dwdipsec ipsec-attributes pre-shared-key *****tunnel-group dwdssl type remote-accesstunnel-group dwdssl general-attributes address-pool vpnpool!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns preset_dns_map parameters  message-length maximum client auto  message-length maximum 512policy-map global_policy class inspection_default  inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect esmtp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options !service-policy global_policy globalprompt hostname context no call-home reporting anonymousCryptochecksum:f5c8dd644aa2a27374a923671da1c834: endDWD-ASA(config)#

  • Unable to add account to Outlook 2010 for email address under custom domain

    I am unable to add a new account in Outlook 2010 for an email account set up under a custom domain.
    Can anyone explain why login credentials that work for outlook.com (successful access to email inbox) return an authentication failure (401 error) when used to test connectivity via https://testconnectivity.microsoft.com?
    Details:
    I set up a custom domain at https://domains.live.com and did the following DNS configuration steps at my web hosting company following instructions from domains.live.com:
    Created custom MX record
    Created CNAME record [name:] autodiscover.jrergonomics.com [value:] autodiscover.outlook.com.
    I created email addresses at domains.live.com > jrergonomics.com > Member accounts and tested by successfully logging in to outlook.com.
    When I try to add either account to Outlook 2010, I get a popup box with this information:
    Title: "Windows Security"
    Connecting to [email protected]
    [[email protected]]
    [ ] Remember my credentials
                                       [   OK   ]  [  Cancel 
    The credentials that I use successfully to log in to outlook.com don't work here; I get the popup box 3-4 times and then the Outlook 2010 Add New Account dialog displays an error:
    "An encrypted connection to your mail server is not available. Click Next to attempt using an unencrypted connection."
    Clicking Next results in an error message:
    "Problem Connecting to Server"
    I have tried verifying the connectivity using https://testconnectivity.microsoft.com:
    <?xml version="1.0" encoding="utf-8"?>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected]." resultdescription="Testing Autodiscover failed." additionaldetails="" elapsedMilliseconds="40517">
    <children>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting each method of contacting the Autodiscover service." resultdescription="The Autodiscover service couldn't be contacted successfully by any method." additionaldetails="" elapsedMilliseconds="40517">
    <children>
    <testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="21181">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 64.90.49.188" elapsedMilliseconds="146">
    <children />
    </testresult>
    <testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&amp;v=ExRCA.1&amp;id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.&#xD;&#xA;" elapsedMilliseconds="21035">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover.jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="4982">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="376">
    <children />
    </testresult>
    <testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&amp;v=ExRCA.1&amp;id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.&#xD;&#xA;" elapsedMilliseconds="4605">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to contact the Autodiscover service using the HTTP redirect method." resultdescription="The attempt to contact Autodiscover using the HTTP Redirect method failed." additionaldetails="" elapsedMilliseconds="14148">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="21">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 80 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="59">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is checking the host autodiscover.jrergonomics.com for an HTTP redirect to the Autodiscover service." resultdescription="The redirect (HTTP 301/302) response was received successfully." additionaldetails="Redirect URL: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml&#xD;&#xA;&#xD;&#xA;HTTP Response Headers:&#xD;&#xA;Connection: close&#xD;&#xA;Pragma: no-cache&#xD;&#xA;Cache-Control: no-cache&#xD;&#xA;Location: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml&#xD;&#xA;" elapsedMilliseconds="45">
    <children />
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="14021">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover-s.outlook.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.241.102, 157.56.232.166, 157.56.245.70, 157.56.245.166, 157.56.236.214, 157.56.236.6" elapsedMilliseconds="191">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 443 on host autodiscover-s.outlook.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="84">
    <children />
    </testresult>
    <testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Testing the SSL certificate to make sure it's valid." resultdescription="The certificate passed all validation requirements." additionaldetails="" elapsedMilliseconds="248">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover-s.outlook.com on port 443." resultdescription="The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate." additionaldetails="Remote Certificate Subject: CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US, Issuer: CN=Microsoft IT SSL SHA2, OU=Microsoft IT, O=Microsoft Corporation, L=Redmond, S=Washington, C=US." elapsedMilliseconds="163">
    <children />
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Validating the certificate name." resultdescription="The certificate name was validated successfully." additionaldetails="Host name autodiscover-s.outlook.com was found in the Certificate Subject Alternative Name entry." elapsedMilliseconds="1">
    <children />
    </testresult>
    <testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Certificate trust is being validated." resultdescription="The certificate is trusted and all certificates are present in the chain." additionaldetails="">
    <children>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US." resultdescription="One or more certificate chains were constructed successfully." additionaldetails="A total of 1 chains were built. The highest quality chain ends in root certificate CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE." elapsedMilliseconds="34">
    <children />
    </testresult>
    <testresult status="Warning" errorid="1339c33a-8f21-427b-a323-4cee1a13f517" contentUrl="" testdescription="Analyzing the certificate chains for compatibility problems with versions of Windows." resultdescription="Potential compatibility problems were identified with some versions of Windows." additionaldetails="The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the &quot;Update Root Certificates&quot; feature isn't enabled." elapsedMilliseconds="4">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing the certificate date to confirm the certificate is valid." resultdescription="Date validation passed. The certificate hasn't expired." additionaldetails="The certificate is valid. NotBefore = 2/18/2014 11:41:01 PM, NotAfter = 2/18/2016 11:41:01 PM" elapsedMilliseconds="0">
    <children />
    </testresult>
    </children>
    </testresult>
    <testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Checking the IIS configuration for client certificate authentication." resultdescription="Client certificate authentication wasn't detected." additionaldetails="Accept/Require Client Certificates isn't configured." elapsedMilliseconds="804">
    <children />
    </testresult>
    <testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to send an Autodiscover POST request to potential Autodiscover URLs." resultdescription="Autodiscover settings weren't obtained when the Autodiscover POST request was sent." additionaldetails="" elapsedMilliseconds="12692">
    <children>
    <testresult status="FatalError" errorid="6c458392-3a8c-4bc2-942e-7ab533744106" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml for user [email protected]." resultdescription="The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response." additionaldetails="An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).&#xD;&#xA;Headers received:&#xD;&#xA;RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c&#xD;&#xA;X-DiagInfo: CH1PRD0910CA013&#xD;&#xA;Content-Length: 0&#xD;&#xA;Cache-Control: private&#xD;&#xA;Date: Mon, 31 Mar 2014 04:57:26 GMT&#xD;&#xA;Server: Microsoft-IIS/7.5&#xD;&#xA;WWW-Authenticate: Basic Realm=&quot;&quot;&#xD;&#xA;X-AspNet-Version: 2.0.50727&#xD;&#xA;X-Powered-By: ASP.NET&#xD;&#xA;&#xD;&#xA;&#xD;&#xA;HTTP Response Headers:&#xD;&#xA;RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c&#xD;&#xA;X-DiagInfo: CH1PRD0910CA013&#xD;&#xA;Content-Length: 0&#xD;&#xA;Cache-Control: private&#xD;&#xA;Date: Mon, 31 Mar 2014 04:57:26 GMT&#xD;&#xA;Server: Microsoft-IIS/7.5&#xD;&#xA;WWW-Authenticate: Basic Realm=&quot;&quot;&#xD;&#xA;X-AspNet-Version: 2.0.50727&#xD;&#xA;X-Powered-By: ASP.NET&#xD;&#xA;" elapsedMilliseconds="12691">
    <children />
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>
    </children>
    </testresult>

    Hi,
    Since this is an Exchange forum and your issue is related to domain.live.com, I recommend you contact with domain.live.com support to get quicker and more professional help：<cite class="_Vc">https://domains.live.com/support/
    </cite>
    Thanks for your understanding in advance.
    Best regards,
    Angela Shi
    TechNet Community Support

  • Unable to add google account since Mavericks update

    Since dowloaing the 10.9.1 update, I have been unable to add or update my google account (including in system preferences, mail app and in the calendar) with error messages such as "unable to sign in at this time" and "a connection error occured". I deleted my google account with the hope of re-adding it error- free, although now I'm unable to even re-add the account.
    Anyone got any ideas on how to fix this?

    Merci, Lionel. Votre suggestion a fonctionné!
    ...dave

Maybe you are looking for

  • Using webserver to share files...

    I am trying to share files and a lot of them. For ease of use I though using the web server would be the right way. The files are stored on a secondary raid striped drive. I created an alias folder and placed that within the documents folder of libra

  • Strange file in trash and it won't empty

    I have a strange file in trash and it will not empty. There is an alias file that has a strange name and a date of dec. 31, 1903. It will not go away when I empty. I put other files in the trash to see if they would be deleted and they do, but the ot

  • HTML vs ORACLE DB

    Hi Scott, I want now if i have to install Oracle 10g and HTMLDB in a server that wil work with GIS or i just install HTMLDB, to developer applications for GIS, because i will migrate the access db`s with workbench by oracle. I hope you understand me,

  • Self registration and modification of tjspSelfRegistrationTiles.jsp

    Hello, How can the tjspSelfRegistrationTiles.jsp be modified to add a combo box to the self registration form? Where can we find this file? Do we need to also modify the FormMetadata.xml file? Where can we find documentation on how to modify the tjsp

  • Need help with Color Matrix Filter.

    need help. still can't find the answer. thanks in advance!