Nokia N8 Unable to Connect External Keyboard and M...

Hi all, I bought N8 1 week back, the device is great
1. For an 8minutes lengthy call using head phone, I felt the phone is heating too much at battery side, please coment on it, if anybody felt so? do i need to go to nokia care?
2. I bought one Microsoft Bluetooth Mobile Keyboard 6000 when its connecting N8 is asking for passkey, I tried many defferent combinations like "0000", "1111", "1234" etc. but its not passing. From Microsoft help they are saying no need to give any passkey, just press enter within 30sec. Can anybody help me to connect this keyboard to N8, OR, if anybody know any KEYBOARD & MOUSE which can be connected to N8 please tell me.

Hello again,just tried It at home now...turn your keyboard on and make It flash red/green..then search for it with your N8...when found,select It.then It will ask you to input numbers on your N8 (I typed 1111)then OK,same number on keyboard then enter,then It will ask you to make connection every time,select NO,mine disconnected after a few minutes when selecting YES,but every time I turn the keyboard on It ask for numbers again,and I have discovered that I can  only have 3 devices  securily connected at same time(not nessecerly on at same time), I have headset,mouse and keyboard,so the external numberpad that was with It cannot be used,hope that help you..

Similar Messages

  • Unable to connect Bluetooth Keyboard and magic mouse

    I am unable to connect to either my keyboard or mouse. I have a bluetooth keyboard and magic pad in my office that was paired to my Macbook pro but I am not bringing it anymore sense getting my iPad. The iPad seems to see the keyboard but not the pad. But neither will connect. I'm baffled.
    Any suggestions will be much appreciated.

    What do you mean the iPad sees the keyboard but will not connect? Have you un-paired it from the other computer? Should do that first, then do the pairing with the iPad...if it is a supported keyboard. Posters have noted they are unable to pair the old A1016 Bluetooth keyboard, ca 2005, with the iPad.

  • How to close macbook,connected whit external keyboard and monitor

    How to put in standby macbook pro,connected whit external keyboard and monitor

    Mac Medic ([email protected]) wrote:
     …I would suggest leaving it open at least an inch for efficient cooling. Air is sucked in via the keyboard…
    Sorry to resurrect this old thread, but the above quoted lines from Mac Medic's post just came up in a search.
    Please bear with me for a second.  I'm a long time Mac user—since the Mac Plus came out—and diehard Power Mac and Tiger fanatic, so I'm new to Mac-Intels and Snow Leopard.
    I'm running my MacBook (not "Pro") in clamshell mode to drive two external monitors.  Am I risking anything by having the lid closed?
    A full description of my MacBook setup is here:  https://discussions.apple.com/message/18553119#18553119
    This is my only Intel Mac.  I rescued it from the trash, literally, after my wife had discarded because of a bulging battery that was making the keyboard, trackpad and mouse inoperative.  I only use it to run Photoshop 13 ("CS6") which doesn't run on my Power Mac G5 Quad.
    Thanks in advance.

  • External keyboard and modifier keys

    I like to swap my "Ctrl" and "Command" modifiers keys and I've never had a problem doing this until upgrading to Lion.  If I disconnect and reconnect my external keyboard sometimes my modifier keys are reset.
    Lion lets you change modifier keys per keyboard which is where I think the problem lies.  I also have duplicate listings for my external keyboard and I'm not sure how to delete the duplicates.
    Does anyone know how to fix these issues?

    Also, I'm not sure if it matters but my mouse and keyboard are connected through a USB hub which then connects to the Macbook Air.

  • HT3988 how to connect external keyboard to the garage band if its possible

    how to connect external keyboard to the garage band if its possible,
      is any body tried ? I have roland e66 keyboard and im trying to
       connect with grage band but i dont know thats is possible??

    You can definitely just connect a mouse and keyboard and then an external monitor and it will work. In the power options in the Windows control panel you will have a choice as to what happens when the lid is closed. Set it to "do nothing" and then you can shut the lid of the laptop and use only the external monitor. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Connecting external keyboard to iPod touch

    Hi,
    Is it possible to connect external keyboard to iPod touch. I saw a article in net which says that we can connect external keyboard to iPod touch with Jailbreaking, which I don't want. Is there any other way to do that?.
    Regards, Arun

    You got a point there, jailbreaking might solve a lot of things like attaching an external keyboard to the iPod touch by installing a application in Cyria store which bring support for Bluetooth keyboard. But is not a very safe choice to do that. Since it clearly voids your warranty on the device and youifht have some problems with software issues causing to malfunction of the iPod touch.
    arun9486 wrote:
    Hi,
    Is it possible to connect external keyboard to iPod touch.
    Regards, Arun
    Well, right now is not possible to connect an external keyboard to your iPod touch because of some software limitations imposed by apple. There are rumors that since the ipad has the ability to use an external keyboard via Bluetooth that it might come to the smaller screen devices like the iPod touch. Some say via an software OS update, but let's see if it's true.
    As of today, the only real solution as to connecting a physical keyboard on the device is by a product that was released last year by Mobile Mechatronics. It’s called iTwinge – a lightweight keyboard sleeve that attaches to the bottom of the device. I will provide a link to the manufacturer website below, click on the link.
    http://www.mobilemechatronics.com/itwinge.html

  • Mackbook internal keyboard fails to work after connecting external keyboard

    I am using 13 inch alum macbook. The keyboard and trackpad has always been good.
    Today, I tried to connect it to an external wireless logitech keyboard. Initially things do not work. Macbook does not recognize the external keyboard, and ask me to press the key on the right hand side of the left shift key. I tried to press a couple of times, and realized that the wireless keyboard has been running out of battery (has not been using that for a while). After I changed the new batteries, things are connected. However, I am not sure what key I pressed to answer macbook's question. Anyway, most keys work as expected (the 26 letters), but windows key on the external keyboard works as the apple command key. Then I downloaded the doublecommand software trying to remap keys.
    Suddenly, I found that the external keyboard fails to work. I then try the internal keyboard, which fails as well. I then disconnect the external keyboard/mouse/display, and restart the machine. The trackpad works ok, but the internal keyboard still fails to work and thus I can not login (can not enter my password). Restarted a couple of times and the situation remains.
    I tend to believe this is a software problem related to the mess up of the external keyboard. I tried to boot the machine using the original installation DVD and repaired the permissions of the hardisk. This did not fix the problem.
    Please help. Thanks.

    Problem solved.
    It was the "doublecommand" software that I installed after connecting the external keyboard.
    I called the Apple Technical Support. They helped me to boot into the safe mode (press Shift when turn on your computer until you see the login screen), and uninstall the software. Things are back to normal.
    Apple technical support is very professional and knowledgeable. Thanks.

  • I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

    I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
    I JUST NEED HELP

    I would contact Apple under your warranty.  I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod. 

  • External keyboard and mouse not working in closed clamshell mode

    Hi - can someone help with this strange issue.  Yesterday in closed clamshall everything was working fine. Today I cannot use my external keyboard and mouse.  Note the external monitor does show the screen (after the blue flicker etc), but keyboard and mouse is just not detected.
    Using Mac OS X (10.7.5).  Tried fiddling the "mirror" settings etc in the display preferences but nothing seems to help.  Really annoying....please help

    don't worry - figured it out !

  • External keyboard and display not recognized

    After upgrading to Leopard, Vista doesn't see my external keyboard and display.
    Any ideas?

    The display was due to Boot Camp setup deleting the old driver and needing to be run a second time. It was disappointing that the external display problem wasn't fixed, but at least release 16902 finally fixed that issue.
    The keyboard is recognized if I unplug and replug it, but it has to be done each time I boot Vista.

  • Just updated to iOS6 unable to connect to Appstore and passbook doesn't work

    Just updated to iOS6 unable to connect to Appstore and passbook doesn't work?

    Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
    Re: How do I turn off the compatibility mode for ITunes.
    Does that clear up the compatibility message?

  • Unable to connect to Forms and Reports

    Hi,
    I'm unable to connect to Forms and Reports. I have done the following installations.
    1) First I have installed oracle 9i database in C:\oracle. oracle schema is devlp
    I was able to connect to database at scott/tiger@devlp
    2) I have downloaded oracle forms and reports from oracle site and installed.
    When installing forms and reports, the directory "oracle" is already in use message popped. So changed the path to C:\oraforms and installed both forms and reports.
    3) After installation, i tried to connect to forms/reports but couldnot connect. Error TNS could not connect.
    4) When i checked the TNSNAMES.ORA, the DEVLP string is available.
    Where should i changed the tnsnames??????
    Please anybody let me know how to have correct tnsnames and where.
    Thanks in Advance
    Chettarjee

    Mr. Sybrand,
    Thanks for the reply and I understood your point. Can you please further guide me to get an appropriate Oracle Forms/Reports (Developer) version in order to make application using Oracle Database 10g. Please note that most of my experience is in D2K 2000 rel:6. and unfortunately I came into software development after a long gap that is why not much aware about latest version out there of Oracle Forms/Reports.
    But is there really no way to connect D2K rel:6 with DB 10g !!!
    Regards,
    Zia

  • Unable to connect to CMC and Java Infoview

    Hi
    I am unable to connect to CMC and Java Infoview. When I am attempting to connect, then the following message is displayed.
    "Oops! Internet Explorer could not connect to <web server>:<port number>"
    Please give me some suggestions.
    Thanks!

    Hi Stratos
    I uninstalled the designer and repaired Crystal Reports Server. But it did not help.
    The CMS is running now. But I cannot find all the other services and I am getting the same error when I try to open CMC or InfoView.
    I found some of these errors in my system's event viewer:
    NT Service message: NT Service Initialization Problem.
    The root server reported an error Initialization Failure.
    The source for both these errors is BusinessObjects_CMS.
    Please suggest something
    Thanks

  • "Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!

    "Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!
    == This happened ==
    Every time Firefox opened
    == Since I downloaded Firefox

    same here my AV is ESET, i already unblock it but no use can't connect to the internet..

  • Unable to connect to rman and sqlplus

    Hi,
    my /u01 location where the orainverntory is located is 100% full ,and i am unable to connect to sqlplus and rman i deleted the old trace files but it doesn't help me.
    what is mininum space required to connect to sqlplus

    If you can post the error messge, we may be in a position to help you.
    Jaffar

Maybe you are looking for