NOKIA N8 - Unable to connect - WLAN Network not fo...

also for NOKIA N8 THE SAME PROBLEM: Unable to connect - WLAN Network not found;I see my network in the wlan list (Tthe state is "knowed") but when i try to connect to it,i read: Unable to connect-wlan network not found;i tryed with: mac filter on/off,dhcp on/of,wep protection on/off,firewall router on/off,power saving in the phone on/off, but the problem is the same ever!..Niklas Savander,..where you are?..nokia is back?..but with the same problems!

Well, I seem to have issues with WLAN as well.
When I am approx. 10metres away from my Router, the N8 doesn't connect. However, I can connect to WLAN using my Nokia N900, Nokia E52 and my Netbook (Asus EEE1005HA). This is a N-router with standard settings. I have tried changing, the channels etc. but it doesn't resolve the problem.
So is this a problem with the Nokia N8? I mean, all my other wireless devices work fine. I even tried changing the Wireless Interface type from N/B/G, to B/G but as I said before, the problem is still there.
Hopefully this problem can be sorted with a software update, that is if the N8 finds it difficult to connect to Wireless Internet.
P.S.: Tthere is another thread reporting similar problems. Here is the link.

Similar Messages

  • Nokia 5800 - Unable to connect WLAN

    Im trying to connect my Nokia 5800 to my network at home via the WLAN. I'm using a netgear DG834PN with Security Option WPA-PSK (Wi-Fi Protected Access Pre-Shared Key). I have already disabled the security code once but i got the same error message. Any tips?
    Unable to connect
    No WLAN network find

    ok i also have the same problem before to but now to connect your phone to the computer by using the usb cable you must first go to "setting"--"connectivity"--then change the mode to "mass storage" or "data storage" after that your will be fine...i hope it work for you all  

  • Message "WLAN: Unable to connect. Wlan Network not...

    Well guys i bought my nokia 5800 today so like any other curious people i looked the wi-fi hoping connect with the internet and when i try to connect with the wi-fi appears this message "WLAN: Unable to connect. Wlan Network not Found." and then it dosen´t connectbut he finds normally the networ and this message appears after i type the Router password.i´ve already looked in another foruns and i´ve already switch off the Option Qos in my router and the problem cotinues, so anyone can help me?my router is one linksys wrt54g and the type of connection is static ip an the security is Wpa Personal TKIP....
    PLEASE ANYONE CAN HELP ME?I´D BE VERY GRATEFUL WITH THE SOLUTION FOR MY PROBLEM...
    Thanks 
    Message Edited by darkcraft on 13-Jul-2009 09:47 PM

    tomasvaril wrote:
    Same To me. I have Asus WL-500W router at home, WPA2-PSK(AES), password similar to this "lIGf@91pY0TnFY!Jh@7LjTUlsL3ZPY", MAC address filtering. My old Nokia E51 works, my Touch Pro Works with it. When i try my one day old Nokia E72 it does not work, the same like others:WLAN: Unable to connect. Wlan Network not Found. E72 works at my work wifi, which has the same settings but without mac filtering. Have no idea what is happening, all is setting correctly. MAC address of E72 is allowed on router. It has the same settings like E51, but E51 works like a charm E72 does not work. What is wrong?
    As already suggested, you could try disabling the MAC filtering from the router, just to outrule possibility of a typo while entering E72's MAC address to router settings.
    Have you tried swithing a WLAN channel that your router uses?
    Log in to your router's web management pages (check router's default IP address and username/password from it's manual) and switch of the "Automatic" channel selection mode. Try few different channels, like 1, 3, 6, 9, 11, if one of the channels happens to work any better. Note that in case you have set your router to use channels 12 or 13 (or in case "Automatic" channel selection mode has decided to select channel 12 or 13) you must have a SIM card inserted and some other than "Offline" profile enabled on your phone since Offline mode (i.e. airplane / flight mode) won't allow your phone to operate on higher channels than 11.
    In case you have configured your WLAN network (SSID) to be "hidden", try disabling hidden SSID mode on the router.
    Asus WL-500W router seems to be a pre-standard 802.11n device so might be worth looking in to your router's WLAN settings and see if playing around with router's WLAN operating mode and settings improve the situation. First of all ensure that your router is not set to operate in 20/40MHz mode (set it to 20MHz only) assuming that the router is in default 802.11b/g/n mode. You could also try disabling the 802.11n mode completely by selecting a 802.11b/g mode (if available).
    You should probably also check that you're running latest (2.0.0.6 ??) firmware version on your Asus WL-500W router since there seems to plenty of complaints regarding WLAN connectivity and stability issues (in general, not specific to Nokia handsets) with this particular router model.

  • I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

    I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

    What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
    A1409 Gen 4.. The new AC is A1470
    How is it setup?
    I need the whole network setup. what modem/router, how is the TC connected etc??
    I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

  • My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

    My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

    AmishCake wrote:
    Have you tried restoring your softwareyes
    yes I have

  • I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

    I am having a major problem connecting to FaceTime today.  Message reads "unable to connect, check network connections".  I am online, mail works, ex
    Tc.  This was not a a problem two days ago.  Any suggestions?

    Could be that the servers are overloaded today.

  • Ipod "unable to connect to network"

    i have an ipod4, and i'm only unable to connect to my home router, my friend's ipod connects to it fine, but mine is having problems, i have reset network settings, turned off sercuity on router and was still unable to connect, i have gone into router and opened mac address too but still wont let me connect, any suggestions

    I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

  • Unable to Connect to Network error with right code

    My Ipod Touch 4G just started having a problem a few days ago i left my house and reset my network settings because i wanted to see something not thinkign about when i got home and now any time i try to connect to it i ge the unable to connect to network error. My friends and family are all using there ipods on our network and they still work and ive tried everything ive updated reset network setting restored the ipod any suggestions on how to fix this?

    - Did you power off and then back on the router?
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • Imac FaceTime unable to connect to network (safari connected and loading pages).

    I have a brand new Imac, I have never been able to get facetime to work. It keeps getting hung up on the log in page, and eventually gives me an error message of unable to connect to network. Safari and other web based programs are working perfectly. 
    Any Ideas?

    How can I get my Mac to join an open 3Com wireless
    network? The network is recognised but Mac is unable
    to connect...
    The 3Com wireless router is connected to a broadband
    router through a PC running XP.
    Do you have two routers? That may be your issue. You should only be using one router, or configure one of the routers and turn of DHCP.

  • Unable to connect to network ios 7

    Tried Reset Network Settings with airpalne mode on and with it off. Reset router. Updated router to latest firmware. Still unable to connect to network.

    Hi there casefromab,
    it sounds like you have already tried a few things, but you may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    -Griff W. 

  • Nokia N97 -- Unable to connect to Wifi?

    Hi,
    Ever since I got my Nokia N97 (Software vers: 12.1.024), I have been unable to connect it to Wifi. Under connectivity, it only gives me the option to add a 'packet data' access point, nothing else.
    Any reason why/way to remedy this?
    It also is unable to connect to my provider's 3G network -- my friend who has a N97 and is on the same network as I am has no problem doing so.

    Do you have the RM-506 China version? This version has no WLAN or 3g.
    http://www.forum.nokia.com/devices/N97/
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Unable to connect to network iphone update server

    I have an Iphone 4 that has been slow for a couple of days , today it started to open app different apps ( click on one and another opened) so i decided to restore and update it . Was running 4.3 . It never updated , has locked in recovery mode . when i try to restore i get a message that the iphone update server network unable to connect . I am running 10.5 itunes on a windows 7 . the iphone is visible in itunes , but when i check the diagnostic it said there is now iOS device connected . Is this a software issue or a hardware issue ? any help would be appreciated .

    VarinderSandhu wrote:
    Helios- Gunes EROL wrote:
    Hi Nasir;
    Please see below note which could be helpful for you:
    ORA-12560: TNS:PROTOCOL ADAPTER ERROR [ID 989716.1]can you pls share me link or url as u suggested above ...
    Regard
    HeliosRegards,
    Varinder SandhuIt's referring to a note in My Oracle Support (formerly known as MetaLink). You need to have a paid service contract with Oracle to access.

  • Unable to connect to network with Safari and Software Update

    A user I support has encountered a problem with networking. He is unable to connect to the network with Safari and Software Update, but IS able to connect and surf with Foxfire and some other programs. Another unusual symptom is that he actually can connect to one web site (which is in his Bookmarks Bar) with Safari, but can't connect to anything else. He's also unable to navigate off of that one site he connects to. When he runs Network Diagnostics, he gets all green lights (no problems). He has fixed permissions, deleted Safari Cache and .plist, rebooted - not fixed yet. He's using 10.4.8 on a PowerPC G4. Any ideas appreciated (this is the wierdest I've seen in a while!).

    Here's what he did. After reading your post, he created another location in his network preferences, entering EXACTLY the same info that was in his old location (he even used the old DNS addresses), except using a new location name. Then he chose the new location and "everything worked". It's one of life's great mysteries. Thanks for your help - it is appreciated.

  • Office HP P1505n printer connected to network not being found

    Hi,
    I'm trying to fix a problem we have had since experiencing a power cut last week. Our main support guy is on holiday and i am pretty new to our network.
    After we lost power i had to manually start all of our servers and services and i thought everything was working until a user tried to use one of our printers.
    The error message for one of the printers was 'Error - Offline' and the other says 'Unable to connect'. Both messages being displayed from the print options in microsoft word. The 2 printers are a HP LaserJet p1505n and a HP Colour LaserJet CM 2320.
    We have a small network with a domain controller and DHCP on one server and our printer installations on another (running Windows Server 2008 R2 64-bit. The printers are connected to the network via ethernet cable. I remember someone mentioning restarting a network switch which is next the printers which i have done.
    I printed a config page from one of the printers and made sure that the displayed IP address was correct in DHCP. It was correct for the address lease and reservation for the printer. When i try and ping the printer from a computer i get 'Destination host is unreachable'.
    It must be something to do with settings not being right after the power cut but i'm not sure where next to look.
    Any advise would be very welcomed.
    Thanks!

    Hello jamesrussellcj, and welcome to the HP Forums.
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HT5569 iPhone 5 on ios6.0.1 unable to connect to network

    iPhone was connecting fine till suddenly unable to connect
    I've tried forgetting the network
    Resetting the phone
    Tried turning airplane and trying
    Resetting network setting
    Turning http to auto
    Renew lease
    Non has helped at all, please help thank you

    Does not work for my home wifi, friends wifi nor any hotspot

Maybe you are looking for

  • [GNOME 3.4] gnome-shell overview search + gnome-documents - CPU 100%

    Hello When I type something in the gnome shell overview my CPU goes to 100% for a few seconds even after I left the overview. The process which is taking my CPU is : gjs-console With gnome 3.4 you can search for documents via the gnome shell overview

  • Using applets as servlet front ends

    hi, i am looking for some examples thx Marrek

  • Zen xtra is detected, but doesnt appear in my computer!

    Hi guys! I havent used my zen xtra in a while. I d/led and installed the latest drivers today, as I wanted to back up my music. I followed the instructions for installing the drivers, and everything went fine. I connected the device, and it said blah

  • Create multiple pages

    i have a form that is distributed statewide and i need the ability for the user to be able to create mutiple pages - this form may have 2 pages or 200 pages and right now i have 20 copies of the page in the file and if they have more than 20 pages th

  • Advanced Routing with WRT120N

    Hi there. A few months ago I configured my former router (WRT54G2) for a OpenVPN. I forwarded the port 1194 and in Advanced Routing I used to have this configuration: Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.128 D