Nokia N8 update to Feature Pack Lite 1

Hello, my phone formely locked to Vodaphone (now unlocked) still hasn't recieved the latest firmware update. It is running of Giffgaff currently. I'd quite like the update, can anyonme give me a hand please.

You will need to ask vodafone when or if they plan to approve the update for release. Even though your phone is unlocked it is still running the vodoafone version of the firmware and Nokia cannot update it until vodafone approves it.
Any unofficial methods for updating cannot be discussed on this forum.

Similar Messages

Nokia 808 Pure View Feature Pack 1

Will Nokia 603 Belle Feature Pack One Increase Processor Speed 1 GHz to 1.3 GHz.
Yesterday in nokia conversation say that only 700 and 701 get increase processor speed 1 GHz to 1.3 GHz. Finally what about 603, the Nokia 603 will increase speed, 1 GHz to 1.3 GHz, same specification as compare other two device.
This is not fair with nokia 603 users...
Nokia Please Confirm Official Words About nokia 603 overclock speed 1 GHz to 1.3 GHz...
NOKIA CONVERSATION Words,
Also good news for Nokia 700 and 701, your handset will be faster and more responsive. It’s not so often that software update delivers an increase in processor speed, but with Nokia Belle Feature Pack 1 the processor speed of your handset will go from 1GHz to 1.3GHz.
Nokia Conversation.
Published by Ian Delaney on March 1, 2012
http://conversations.nokia.com/2012/03/01/all-about-nokia-belle-feature-pack-1/
Regards,
Ahsan Shahid...
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

PLz Nokia Confirm Official Statement about Nokia 603 processor speed...
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

SharePoint 2013 Multi-tenant Feature Packs

I have not seen any information in regards to multi-tenancy feature packs for SharePoint 2013. Currently it seems, with the new end user licencing, when you install the Enterprise bits you can license a user for either Standard or Enterprise but not
Foundation. In SharePoint 2010 you could use the Enterprise bits then create defined feature packs to give a site collection Foundation, Standard or Enterprise features. Do updated defined feature packs exist for 2013?
There is mention of them here http://www.harbar.net/articles/sp2013mt.aspx
"Feature Packs provide the ability to constrain the Features available for a given tenant. The fundamental capability
isn’t changed in any way here, but of course the Features in the product have. Thus the old Feature Pack definitions for SKUs are no longer valid. A new set of feature pack definitions are required encompassing all of the new Features in SharePoint 2013."
But nothing else anywhere on the net, anyone have any ideas?

Hi all,
I thought I'd give an update. I too have worked through official channels and I believe I'm making progress but not a solution unfortunately. When you run Get-SPFeature, you get 409 different features. One thing I noticed, was the features
ending with Stapler that Spence didn't add to his foundation features suggests that adding these could be erroneous. This led me to believe that my ignorance in the above message was bliss and that my idea was not going to fly. Take for example
this:
AutohostedAppLicensing
AutohostedAppLicensingStapling
So is AutohostedAppLicensingStapling a Standard or Enterprise Feature, or something internal that should not be added as it gives bad results? What about the others I don't find?
Then I posed the question - what do the ID's with EDU* in them mean? They don't exist in product info - perhaps it's education specific SKU's? Does that expose customers to use SharePoint for Internet Sites without the SKU as we assume Enterprise
would be the baseline for all 409 features and we work our way back?
Or even this - MS Access Services is a feature, yet there are 10 Feature ID's associated with it. With Exchange, there are PS commands that refer to MS Internal only and for O365 use only. What
if the 209 features Microsoft sent me as a descriptor for onprem cannot correlate to the 409 Get-SPFeature ID's I have in my bag that render my farm useless?
I've also done research around the net and it looks like everyone went the inefficient, non-multitenant way - that is, either do foundation and try to compete with O365, or offer dedicated VM farms for clients with Standard or Enterprise installs and centralise
the SQL back-end.
Surely noone has done true multitenant... Have they?
Question. If i provision a client with no -Featurepack ID, do they get nothing or the default which is Enterprise Edition? I'd presume I will get nothing or an error for not specifying a switch but I would have to build another environment to
test.... which brings me to my last point. Based on the way Std and Ent can be enabled for on-prem customers on an individual basis and I installed Standard edition on its own VM then enumerated the Get-SPFeature cmdlet, surely I'd see all the features,
not just the standard edition install features. right? If not then I'll build it, enumerate the list and my 2013 Feature pack is sorted.
The biggest fear I have on this is going it alone and if I stuff up, having a non-compliant licensing solution for every user on the system and MS banging down my door for noncompliance on something they didn't provide guidance on in the first place.
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Nokia belle feature pack 1 update for nokia 603?

would any official from nokia please tell me if nokia 603 will be upgraded from 1ghz to 1.3 ghz like 700 and 701?. Many people owning 603 are asking about this and if no, would you please give us the reason aren't 603, 700 and 701 identical hardware wise and software wise?) and also if no, will this affect future upgrades and updates for 603 i mean : will it get the same upgrades and updates of 700,701 and 808 after belle fp1 update ?!!)

Will belle feature pack one increase processor speed 1 ghz to 1.3 ghz.
Yesterday in nokia conversation say that only 700 and 701 get increase processor speed 1 ghz to 1.3. finally what about 603, the 603 will increase speed.
This is not fair with nokia 603 users...
Nokia plz Confirm Official Words About nokia 603 overlock speed 1 ghz to 1.3 ghz...
(NOKIA CONVERSATION) Words,
Also good news for Nokia 700 and 701, your handset will be faster and more responsive. It’s not so often that software update delivers an increase in processor speed, but with Nokia Belle Feature Pack 1 the processor speed of your handset will go from 1GHz to 1.3GHz.
http://conversations.nokia.com/2012/03/01/all-about-nokia-belle-feature-pack-1/
Regards,
Ahsan Shahid...
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

Nokia Belle Feature Pack 1

In
http://conversations.nokia.com/2012/03/01/all-about-nokia-belle-feature-pack-1
we can have an overview of Belle Feature Pack 1 and some key features..
It's stated that Nokia 603, 700 and 701 will have this update.
Will it be made available, at some time, as an update to the same phones that got Belle recently from Anna, like E7 or N8?
Best regards

skyee wrote:
Hi all,
to clarify the point if the Nokia Belle Featurepack 1 will be made available for N8, C7, E7, X7, E6, C6-01 and Nokia 500, here is the official statement from our Nokia Communications team.
This Nokia Belle Feature Pack has been tailored and will be made available for Nokia 603, Nokia 700, and Nokia 701. Due to hardware requirements and specifications, the Nokia Belle Feature Pack 1 will not be made available to other Symbian devices.
As for the question if there are future updates to Symbian phones, like N8, C7, E7, E6, X7, C6-01, Nokia 500:
We regularly deliver software updates to all Nokia phones to give our consumers both performance improvements as well as additional features. We are committed to continue software support for Symbian through 2016.
Best regards,
Yvonne from Nokia Care
Hi Yvonne
Thanks for the info.
Can you tell us when are you planning to release for us the bug fixes and the missing widgets for Symbian^3 devices updated to Belle?
Your answer will be much appreciated.
Thanks in advance!

Unable to reinstall Feature Pack 1 for Nokia 701: ...

I have just upgraded my 701 to Feature Pack 1 using Nokia Suite, however, given I've had problems in the past with the Microsoft ActivSync always asking for passwords with Google I thought I'd reset the phone and reinstall from scratch.
I performed a hard reset by pressing the menu, volume down and camera keys as I turned the phone on then tried to reinstall using both Nokia Suite (beta), Nokia Suite (normal) and Nokia Software Updator. All of them say I need to insert a valid SIM card! There is nothing wrong with the SIM card that is in - it works fine. I've tried two others, one from a different network, with no success. I've changed the profiles around and turned off the security code, but still no success.
A number of applications are missing since the hard reset, notably Nokia Store, which won't install at all, either the current version or the one from betalabs. They download but the installation fails.
Any suggestions?
I've also noticed the calendar week view is no longer there, scroll bars have stopped working, and the menu key can no longer be cancelled by pressing the same bit of screen again (the new menu has been drawn too low).
Best wishes,
Mark.

mdcoley wrote:
Cheers! Store is now working. I didn't quite do things in your order as your post came in after I started experimenting. This is what I did:
Three-finger reset again.
Installed the .sisx file above (cwrt core).
Installed the Nokia Store from Betalabs (with Qt 4.7.4).
Read your post, so deleted those two files you mentioned from installated apps.
Installed earlier version of Nokia Store from your link.
Ran this, which prompted me to upgrade.
Can now log in without the black screen.
It seems remarkable that doing a factory reset means the phone doesn't work.
That's the question;Nokia advise to never do a 3 finger hard reset.this process delete some files that isn't recoverable even reinstall software.
I have a C7 as well and already perform a 3 finger hard reset,but a software reinstall put it back as 2out of the box".don't know why this do not works in Nokia 701
At least you have the store back again right?
As far as i know it should be missing in your phone,the photo and video editor right?
That's why i took mine to Nokia Care Center,they put the phone as out of the box.
Nokia Lumia 820
Nokia 701

When can we can get Nokia Belle Feature Pack 2

Hello ... first of all i am very enjoying to be Nokia account...i want to ask that i have Nokia C6-01 ... and updated it and get Nokia Belle Refresh ... i have 2 questions to you...can you give me more information about it...
1)why we can not slide to unlock or slide to answer ... when will we do with belle???
2)today i read about Nokia Belle news i saw that there is new Nokia Belle Feature Pack 2 ... when can we get it???or will be update in C6-01??? which models will be? can u tell me what is the new in Nokia Belle Feature Pack 2 ??? Please help me ...bye
Solved!
Go to Solution.

Hi hi,
No your device will not receive Belle FP2, that is only for the newer Symbian^3 devices, therefore N8, E7, C6-01, X7, E6, C7, 500 etc will never receive Belle FP2, only the newer ones such as the 808 PureView, 700, 603, and 701.
There is an app that I can't remember the name of that copies the style of the N9 where you can slide to unlock the screen etc, and has the same font as the MeeGo OS etc etc, its in the Nokia Store.
Lastly, as Symbian is now in maintenance mode, there will be no more firmware updates made available for such devices, as the focus is now on Asha models and the Windows Phone platform with the Lumia range of phones.

Has the S60 3rd ed Feature Pack 1 been released?

I must be missing something. I keep reading about this feature pack, but can't find it for download. Has it been released? Where can I find it, or is actual release some time away?
Nokia e61, unlocked, Asian kbd.
Moto V3,unlocked, moderately modded

The S60 3rd Ed. FP1 will most likely only be available when you get a new phone based on that version.
Nokia has not ever released a new S60/Symbian version as an update/upgrade for older models, and they're probably not going to do it now, either.

Where's the Nokia Music update for FP2???

Hello,
Was this update pulled lately from pipeline? Because it's been a week since when I performed a clean update to FP2 on my 808 PV and the only over-the-air updates back then were Microsoft Apps and New Social; also only these two updates were offered via Nokia Suite.
No sign of Nokia Music and / or other minor updates at the time being.
What's wrong with the rest of the updates? My Nokia Music is useless right now (it won't open).
Release: Nokia Belle Feature Pack 2
Software version: 113.010.1507
Software version date: 2012-09-21
Custom version: 113.010.1507.C00.01
Custom version date: 2012-09-21
Language set: 113.010.1507.04.01
Product code: 059M966
Model: 808 PureView
Type: RM-807
Latest update: Not updated
Browser version: 8.3
Flash version: 4.0
Java version: 2.5
Previous (starting with '99): 5110 (2 pcs.); 6110; 6150 (2 pcs.); 6210; 6310i; 6680; N70; N73; N82 Silver; N97 Transition Black; N97 mini Cherry Black; iPhone 3GS 16GB Black; iPhone 4 16GB Black; N8-00 Dark Grey; iPhone 4S 16GB Black; iPhone 5s 32GB Space Gray
Current: 808 PureView Black (Nokia Belle FP2, v113.010.1507) & iPhone 6 64GB Space Gray (iOS 8.1.2)

@aspergerguy: yes, barely today I was offered with Application compatibility fix & Big screen, but no sign of Nokia Music or other older minor updates...
Previous (starting with '99): 5110 (2 pcs.); 6110; 6150 (2 pcs.); 6210; 6310i; 6680; N70; N73; N82 Silver; N97 Transition Black; N97 mini Cherry Black; iPhone 3GS 16GB Black; iPhone 4 16GB Black; N8-00 Dark Grey; iPhone 4S 16GB Black; iPhone 5s 32GB Space Gray
Current: 808 PureView Black (Nokia Belle FP2, v113.010.1507) & iPhone 6 64GB Space Gray (iOS 8.1.2)

Error during Map Update via Nokia Maps Updater on ...

hi,
im trying to update maps on my n96. but i get an error message. here are my details:
"Cannot get enough information about the phone [3]
unspecified error(1)."
PC: Windows 7 Professional 32 bit
PC Suite 7.1.40.6
N96: SW 30.033, 30.033.098.1, 18-06-09, RM-247
N96: Maps version installed: v3.01 09wk26b02, Map version 0.1.22.103 OpenBitLM 6.2.1.4
Setup Nokia Maps Updater 1.0.12.exe
Is there any workaround for n96? I tried to download an install nokia_maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis file from a link in another thread about similar issue with n95, but it will not install on n96.
any tips will be greatly appreciated.
- chr

In a similar thread I found this post by Ovikovi:
"For those having trouble installing the Nokia Ovi Maps application itself.
I currently have links for 4 versions of the Nokia Ovi Maps application. These files need to be stored on your memory card on your phone (usually you would connect your phone to the computer in Mass Storage mode and pop the files on the card, then disconnect and install the application on your phone).
After installation, run the application once, then exit. Now you can install your maps.
Previously I only had links to three separate versions of the OVI maps application here. Maybe the extra one will help some of you.
Symbian is an operating system used on nearly all Nokia smartphones. Which version of the Ovi Maps application you need for your phone depends on which version of Symbian you are running on your phone.
Here they are:
Ovi Maps 3.01
(for non-touchscreen devices such as the E63 and similar running the same version of the operating system (Symbian S60 version 3 Feature Pack 1) without free turn-by-turn voice guidance [program requests license when making a route])
http://static.s2g.gate5.de/nokiamaps-client/nokia_ maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis
Ovi Maps 3.03
(for non-touchscreen phones fully supported with free turn-by-turn voice navigation)
http://nds1.nokia.com/PRODUCT_METADATA_0/Explore_S ervices/Ovi_Maps/nokia_maps_3.03_10wk11_b04_s60_3...
Ovi Maps 3.03
As above (fully supported with free turn-by-turn voice navigation) on selected phones but for slightly newer version of the Symbian operating system (S60 version 3, Feature Pack 2)
http://nds1.nokia.com/PRODUCT_METADATA_0/Explore_S ervices/Ovi_Maps/maps_installer_3.03_10wk1_b05_s6...
I tried all 3 versions of the sis install file, but none of them will install on my n96.
Now what?

Problem with App-V 5 in Xenapp 6.5 Feature Pack 2 /PVS Server 7.1 Environment

Hi I hope someone can help me. We are pretty desperate right now.
At e customer of mine we are Using App-V 5 SP2 RDS Client together with a Xenapp 6.5 Feature Pack 2 /PVS Server 7.1 Environment.
The Golden Image for PVS gets built with SCCM 2007. We “Install” the App-V Packages local with Powershell with e Install Wrapper.
The Wrapper uses for Example the following command to “install” the Package during the Task Sequence.
Add-AppVClientPackage -Path "C:\_SMSTaskSequence\Packages\I010012B\x86-GE\001\Biella-Dominalprint(V)-2.0.appv" -DynamicDeploymentConfiguration "C:\_SMSTaskSequence\Packages\I010012B\x86-GE\001\Biella-Dominalprint(V)-2.0_DeploymentConfig.xml"
| Publish-AppvClientPackage -Global | Mount-AppvClientPackage -Verbose >C:\Windows\Logs\Install\Biella-Dominalprint(V)-2.0_001.LOG
The Package was Sequenced with SP1 Sequencer.
The Package contains e SystemX86 folder
C:\ProgramData\App-V\5D8F5879-923B-4401-BE13-F6E120F6569C\83FF2A00-5D2A-4A3B-82FD-3238D786BEE3\Root\VFS\SystemX86
In This Folder are a few Files. One of them is the tdbg5.ocx
The Package works without a Problem after the Installation of the Server has finished.
But when the Citrix Department does there Magic with PVS and they provision the VHD to another Server the Package is no longer Working. When we start the App we get an Error that it is Missing the tdbg5.ocx
But when I Use ACDC 2.0 to start the App or modify the Shortcut with the command /appvve: 5D8F5879-923B-4401-BE13-F6E120F6569C_83FF2A00-5D2A-4A3B-82FD-3238D786BEE3 it is working. Also when I remove the Package with Powershell from the provisioned Server
and reinstall it again it is working Again.
We have this Problem with two other Apps and both of them have files in the Root\VFS\SystemX86 Folder.
We also have e Virtualized Java Package. We have a Shortcut like this:
C:\ProgramData\App-V\1A971C0F-1C0F-430F-A2E2-2DF8487E6FF0\80A50994-7B30-4FC3-9DA4-1CE8B979B337\Root\VFS\ProgramFilesX86\Java\jre1.6.0.38\bin\javaws.exe
http://whatever.ch/zpv/webstart/zpv-prod.jnlp
If I start that link on the provisioned Sever Java Launches but it’s not downloading the App to the Cache. But also here it works perfect after the installation with SCCM, and it also works when I remove the package on the provisioned Sever and “install”
it again with Powershell. But here the /appvve workaround doesn’t work.
I know that we should ask that in the Citrix forums, the Citrix department of the Customer is opening a Case with Citrix and one with MS Support. But we are I a big hurry because the customer needs to start testing the Apps, because they need to start
the pilot Test very soon. So I hoped that someone in the community can help me out with this.
Thank you for your answers
Pascal

Another alternative, if you dont want to use the Shared Content Store, is to have your PackageInstallationRoot pointing to a non-provisioned disk (non-PVS). In our environment we had the same exact issue. Each of our Citrix servers have
a D drive thats non-provisioned that we use for Logs. Once I pointed the PackageInstallationRoot over to this location everything started working.   The key here is to have a script run at server startup that deletes the PackageInstallationRoot
since the provisioned non-persistent disk will reboot to a fresh image each time.   This way you wont end up with stale content out there as applications are updated and/or removed.
There are other things that also have to happen for this to work in these types of environments (related to roaming profile exclusions) that I can provide to you if you need them.
Let me know if you want/need more details.

Media Feature Pack cannot to Install on Windows 8 Enterprise 64 bit

Hello, I have Windows 8 Enterprise 64 bit in my laptop,,,
recently when I tried install a certain program it showed error telling me that Media Feature Pack is not installed yet in my laptop,, and so I download a windows update standalone installer for windows 8 : Windows6.2-KB2703761-x64.msu,,,
but the problem is each time I try to install it shows error: The Update is Not Applicable to your computer,,
I am certain that I don't have Media Feature Pack in my windows yet,, and if this installer is not the right update for me, which one is?
Please Help Me! I need this solved badly!

Okay, my apologies, but this is the most ridiculously flawed logic i've ever seen: you're essentially stating that MSFT doesn't think business users have any use for windows media center capabilities because enterprise is for so called, "business"
use. I'm surprised that MSFT knows what "all business" needs are...and how media plays no part of "all businesses".
For example, I'm a developer - my company has given me this surface pro w/ enterprise to develop media apps on - so how is this not relevant to people outside of the consumer level? I'm suppose to go back to my boss and just be like, "hey! so funny
story - windows 8.1 enterprise, for which we pay a hefty msdn license fee for, actually doesn't have what we "really" need - we actually have need
one license for the "cheaper" version of windows because msft doesn't believe that media should play no roll in general business activities (despite how much we already pay) - oh yea - fyi - i need all my development software reinstalled
again."
What is this... the 1990's still? Please, msft - don't insult our intelligence and
force applications to not be cross compatible to different so-called "operating systems" just because you want to take the consumer for an extra dollar.

Problems still after adding Media Feature Pack (win8.1, 64bit, c660d)

Hi guys!
I.m just after installing win8.1 pro N to my Toshiba Satellite C660D laptop, it was a clean install directly from win7 (so no 8 meanwhile), i updated everything just after install, also the newest Media
Feature Pack (6.3-KB2835517-x64) update to have media content too.
The following problems I had:
still nothing that helps me in media parts (no media player, no sound recording, no webcam-i couldn.t see its place in device manager either)
i couldn.t install one update (error code: 0x80070003 )
and some appeareance problems, might due to the lack of video card driver
and some smaller background missings.
So i.ve installed drivers (it was a collected driver pack by Toshiba, directly to help upgrading from 7 to 8), which made my appereance running good, all the installs came down and installed - but still no media pack (no
player, no mic, no webcam).
If I want to install again 6.3-kb28355.... it tells me that i.ve already did it.
The errors i still have at system logs: some services cant run "the system is configured to not allow interactive services.", and "The server did not register with DCOM within the required timeout." Also
some warnings: "WLAN Extensibility Module has stopped." and "The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM.........", this last one is from source "Kernel-Pnp"
Update Troubleshooting tells me that "problems installing recent updates" is Not Fixed, also
SFC Scan (same time at the Command Prompt too) "did not find any integrity violations". However
checkin the updates it comes that I have installed all the recent updates (everything is green and happy)
Since yesterday i.ve tried many many possible solutions; these above are from the last reseting of windows (so there shall be no other disturbing factors in the background (?) ). Please if somebody has any idea what a) happened b) shall i do to fix. Is there
one problem here that might causes the others, or is it more difficult..?
Thanks for listening,
cheers
totto

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Nokia Software Updater - Error 1720

Hi, I would be very grateful if anyone could help with the following problem:
I have downloaded Nokia PC Suite - this works fine..
When I try to download Nokia Software Updater, I receive the following error:
"Error 1720: There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action Kill_process error -2147217407, : Line 5, Column 1, "
Could anyone please advise what I can do. (I am not very technical - so any basic advice would be appreciated!)
I am using Windows XP - Home edition. I have a Nokia 5800
Thank you

If you experience behavior such as application errors or scripts that used to work are no longer working, you may have a corrupted WMI repository. To fix a corrupted WMI repository, you have to reinstall WMI. Follow these steps:
For Windows XP Service Pack 2
Click Start, Run and type the following command:
rundll32 wbemupgd, UpgradeRepository
This command is used to detect and repair a corrupted WMI Repository. The results are stored in the setup.log (%windir%\system32\wbem\logs\setup.log) file.

With All These New Feature Packs........

With all the new feature packs that have been introduced here is a list of features that i would like to see introduced also.....
1. A password protected folder for all media files as well as document files
2. Better use of the gallery/albums....if an image is stored in the albums folder it shouldnt also appear (still) in the gallery section
3. Instead of all images being shown in the gallery irrespective of them being stored on the phone memory or memory card, users should be able to "switch" between images on phone, images on memory....only the albums folder should show images irrespective.(this feature was on previous S60 models)
4.dual sim card slots....i have two sims one for personal and one for business sometimes its a bit annoying having to take the battery out etc. to switch sims.Plus while i have my business sim in i could miss a personal call and vice verce
5.Bluetooth AD2P becoming a standard on higher end phones
6.Text to speech becoming a standard on (higher end/all) phones
7.settings in the camera should not return to default after the application is closed...if i set my camera settings for "night mode" and close the camera application when i return to "night mode" my settings should still be there rather than me having to do this all over everytime.
this is what i have come up with please add constructive ideas here.....

14-Feb-2007
09:46 PM
roberth wrote:
With all the new feature packs that have been introduced here is a list of features that i would like to see introduced also.....
1. A password protected folder for all media files as well as document files
2. Better use of the gallery/albums....if an image is stored in the albums folder it shouldnt also appear (still) in the gallery section
3. Instead of all images being shown in the gallery irrespective of them being stored on the phone memory or memory card, users should be able to "switch" between images on phone, images on memory....only the albums folder should show images irrespective.(this feature was on previous S60 models)
4.dual sim card slots....i have two sims one for personal and one for business sometimes its a bit annoying having to take the battery out etc. to switch sims.Plus while i have my business sim in i could miss a personal call and vice verce
5.Bluetooth AD2P becoming a standard on higher end phones
6.Text to speech becoming a standard on (higher end/all) phones
7.settings in the camera should not return to default after the application is closed...if i set my camera settings for "night mode" and close the camera application when i return to "night mode" my settings should still be there rather than me having to do this all over everytime.
this is what i have come up with please add constructive ideas here.....
I really like the idea of the dual sim and the gallery being split to the mem c\rd and phone mem.
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

Nokia N8 update to Feature Pack Lite 1

Similar Messages

Maybe you are looking for