Nokia N80 and LifeBlog problem(Please Help)

Hello
I bought my n80 a week ago and I bought a 1GB memory card,so I moved all the files from the 128MB memory card to the 1GB memory card,anyways when I switched my mob on I had to install life blog again,but when I try to start the programme it wouldn't start, so I sent the aplication again from the old memory card to my phone using PC SUITE,anyways I just wanted to know whats the difference between those two file:
LifeBlog_Installer
LifeBlog
because when I installed LifeBlog_Installer the programme wouldn't work,but when I installed LifeBlog it worked perfectly, is it ok if I deleted LifeBlog_Installer?

This Apple Tech Support Document seems to mention exactly your error:
iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

Similar Messages

  • Nokia E61i and iSync problem - Please help!

    I had the Nokia E62 and I was syncing with my macbook pro without any any problems. Last week I got the Nokia E61i and installed the plug-in for the isync from the nokia website. I have been unable to sync the 2 phones. I have deleted the phones from isync and reset the phones but no luck. I have tried both bluetooth and cable. The isync connects to the phone but give me an error message - "An unexpected error occured. Device 'Nokia E61i' synchronization failed"
    Please I need someone to help me resolve this problem.

    This Apple Tech Support Document seems to mention exactly your error:
    iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

  • Nokia N8 sim card problem please help!!

    I have been the proud owner of a Nokia N8 for about 9 months now without any problems or issues jus some random bugs...since N8 is a troubled device as we all know. But anyways jus now it has come up with lots of issues...at first my phone started to restart as soon as the phone started up. Even before all the apps loaded up and i tried around 15 times to switch off and start and stuff. But to no avail...so i went on some forums and blogs and got some tips like resetting it by holding down the power button for 8 secs and everything but still the same problem. Now, I removed my sim card and put in a different one and VOILA it worked!!! No restart so I thought maybe the older sim was faulty. but as i put the old sim in another phone...it worked in that phone! I was dumbfounded as the sim was working on my n8 before toO! ......so i just ignored it and i used the other sim in my n8 but not for long after half an hour the phone was not starting up sim card or no sim card. so i flashed my phone to the official Symbian Anna and i tried booting up without a sim card and the phone works properly. but as soon as I put in the sim card and switch the profile to normal mode..the phone freezes for about 5-6 seconds and reboots only to find my phone in offline mode again and same problem. I have tried changing sim cards nd memory cards, reset, reflash, format the mass memory, and everything else possible but in vain. The problem still exists!! Can anyone please help me as Im very fond of the phone and I dont want to send it to the service center as they would come up with some lame excuses + i hav lost my warranty card!! Please help....and btw the phone works flawlessly without a sim card! And also, in offline mode when i switch on the bluetooth...the phone freezes and restarts! Evn the WLAN keeps on searching for network and doesnt find any even though there is! Any help would be appreciated... thank you!

    Just want to say "I dont have my warranty card"
    No official Nokia care point will say this as they can check the warranty satus online using your IMEI number- if they do not do this, either insist they do or report them to nokia care direct and lodge a complaint. (0845 045 55 55 from the UK)
    Even if the warranty has expired online, this can be extended if you can provide a proof of purchase date. This can be a delivery reciept if you bought online, or your high street retailor will be able to provide you with a copy if you ask them- even your original service agreement should be enough. Remember you get a full 2 years warranty with all Nokia handsets. 
    Nokia Care are there to help, not to make things difficult for you. They go through untold amounts of training to ensure you get your handset back as soon as possible in a fully working order. 
    I feel bad you feel such reluctance to contact a care centre, Nokia have gone to massive efforts to provide consumers with this kind of readily available support. 
    If you are in the UK and your local care centre is not helping you I would suggest you call the one i use, they will give you all the advice you need 01242 539539 (i hope giving out this info is ok on the forums)

  • The update and other problems PLEASE HELP!!!

    The ovi store on my phone asked me to download the newer version which I did, is there an update for ovistore on the computer because I haven't heard about it if there is one and it may solve the problems I have been having with it:
    1. I don't receive the messages when trying to get an app
    2. It wont let me down load apps when I connect my phone to the computer
    (also on the nokia website it told me to click the download and install button to get an app when plugged into the computer but I can't find it..Any ideas where it is???)
    please help i've had this problem since I first set up my account and its really bugging me now!!!!!!

    (Apologies for barging in Steve.)
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80071A91, or some other number? (If they're another number, what number are you getting?)

  • NOKIA N80 Internal Error Message PLEASE HELP

    Does anbody Know why I Get an Internal Error Message When I Send a Multimedia Message.... Everytime I Try to Send a Picture as Multimedia it Says Unable to Send Message and When I Click Details it Says Internal Error....... Please Help

    -----
    I thought maybe it was the site itself. Then I tried it with another site and the same problem
    well, thanks for that info -- considering this I can´t help suspecting that your ADDT (or Dreamweaver) installation might be broken. For a start I suggest to uninstall/reinstall ADDT first and see if this solves your issues
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • [Other 865 Series] 865PE Neo3-F (SATA and PATA problems),please help,thx

    Hi
    I have MSI 865PE Neo3-F mainboard and I have a few little problems with Neo.
    My first:
    I have HDD Maxtor DiamondMax10 300GB,16MB cache,SATA.When I was installing Windows,(widows setup) it shows that HDD has only 131GB.BIOS shows 251GB.what does it mean?Not supported HDD or only 130GB for one partition?
    My second:
    I want to connect also P-ATA HDD,but BIOS don´t see him.
    What would be IDE settings in BIOS and also jumper settings on PATA HDD and DVD when I want use:
    SATA as Primary Master (system disk)
    PATA as Secondary Master
    DVD-ATA IDE as Secondary Slave
    My last:
    What I should installing when I want to use all advantages of SATA HDD and what would be BIOS settings?
    PLEASE HELP IT IS URGENTLY,CAUSE I HAVE TO WORK TO MY SCHOOL
    ANY HELP WOULD BE APPRECIATED.
    Thank you

    At the first thank you for your reply.
    Yes it works. 
    Sorry I didn´t post my OS.My OS is XP (with SP2,now).
    Configuration:
    P4 Prescott 540J 3.2GHz,FSB800MHz,HT (enabled)
    MSI 865PE Neo3-F
    2x APACER 512MB DDR400 (Dual channel,slot 1 and 3)
    ASUS FX5700 256MB
    Maxtor DiamondMax10 300GB,16MB cache,7200rpm
    DVD-RW Plextor 716AK
    After installing Service Pack 2 windows shows that HDD has 300GB,but I created two partitions before (C:\ [30GB] and D:\ [100GB] in windows setup) and now (after install SP2 E:\ [170GB]) one partition in Windows.Problem how do I put together last two partitions (D:\ and E:\) to one partition?
    so if I right understand after this settings in BIOS:
    Native Mode
    ATA Configuration - PATA only (or SATA-only)
    SATA Keep enabled - yes
    PATA Keep enabled - yes
    PATA channel selection - both
    and what about another two options in this menu?what are the settings?(somtehing about 1st channel and so on)
    connections looks like that:
    on  IDE ATA100 cable from IDE1 will be connect HDD ATA100 as Master and DVD as slave?
    on SATA cable from SATA1 will be connect HDD SATA?
    How system knows which one from two Masters HDD is System disk?from Boot menu?
    Is some page on the web where can I find closer explain of IDE (SATA) settings for MB MSI?
    Sorry for questions,but I am working at the first time with SATA disk 

  • Movies and Audio Problem - PLEASE HELP!!!!!

    Hi,
    If I am working on the music for a movie file i sometimes open a new project with no global tracks, so as i can focus on the music, when i then choose to open the movie and see what the music sounds like with the movie all is fine..... until i stop the movie. If the movie is not playing or doesnt have the volume slider raised high (on the movie window), no sound is heard when i press a key on my midi keyboard. This means i can only come up with ideas when the movie is playing. If i close the movie and/or the global tracks, the problem remains the same. I have to close logic an reopen it in order for me to hear any sounds (audio tracks and midi). Any advice or help would be great as this is really frustrating me. Thanks, Ben

    I use Logic Plug ins and Korg/Steinberg plug ins. I have a multi instrument set up in my environment for an external Korg Trinity Keyboard. It is no longer connected as it was too difficult to control program changes etc and recording in audio takes too long for me. This many be the problem??? Maybe i could remove the multi and see if this helps. I am thinking of re-connecting the Korg to my computer but am not sure if it will cause more problems. Any advice? Thanks... Ben

  • Substri and instr problem --Please help

    Hi ,
    I would like to get the find tablename starts with 'EXP' using substring and instring . I am using oracle 9i. Please help me out
    Example : 'Schema.explogtable'
    I will use table name ' EXP' in one of my procedure as input parameter to procedure
    If tablename= substr('schema.explogtable','instr('schema.explog','.',1,3) then
    Execute Procedure1('tablename')
    Else
    Execute procedure2('tablename')
    I would appreciate your help
    Regards,
    Clarkc

    ClarkC,
    Here just replace procedure1 and procedure2 with your procedure names;
    create table temp_table
    ( table_name varchar2(30)
    insert into temp_table values ('TESTME.MY_OBJECTS');
    insert into temp_table values ('TESTME.OBJECTS');
    insert into temp_table values ('ABC.ECFOBJECTLOG');
    insert into temp_table values ('XYZ.BDEOBJECTTABLE');
    insert into temp_table values ('ABC.ABCTABLE');
    insert into temp_table values ('ZYD.CLIENTTABLE');
    insert into temp_table values ('NMS.CLIENTLOGTABLE');
    COMMIT;
    pl/sql anonymous blocks  I defined 2 variables for readibility and understanding
    DECLARE
       CURSOR tcur
       IS
          SELECT table_name
          FROM temp_table;
       table_name   VARCHAR2 (40);
       my_table     VARCHAR2 (40);
    BEGIN
       FOR cur IN tcur
       LOOP
          my_table     := NULL;
          my_table     := cur.table_name;
          table_name   := SUBSTR (my_table, INSTR (my_table, '.') + 1);
          IF (table_name LIKE ('%OBJ%'))
          THEN
             DBMS_OUTPUT.put_line ('table_name containing OBJ=' || table_name);
             -- NOTE : CALL YOUR PROCEDURE1 HERE for tables containing OBJ;
            procedure1(table_name);
          ELSE
             DBMS_OUTPUT.put_line('table_name  not containing OBJ=' || table_name);
               -- NOTE : CALL YOUR PROCEDURE2 HERE for tables not containing OBJ;
            procedure2(table_name);
          END IF;
       END LOOP;
    EXCEPTION
       WHEN OTHERS
       THEN
          DBMS_OUTPUT.put_line (SUBSTR (SQLERRM, 1, 300));
          RAISE;
    END;
    Here is the output of the above block
    table_name containing OBJ=MY_OBJECTS
    table_name containing OBJ=OBJECTS
    table_name containing OBJ=ECFOBJECTLOG
    table_name containing OBJ=BDEOBJECTTABLE
    table_name  not containing OBJ=ABCTABLE
    table_name  not containing OBJ=CLIENTTABLE
    table_name  not containing OBJ=CLIENTLOGTABLEHope this helps
    Regards
    Edited by: OrionNet on Jan 17, 2009 11:48 AM

  • Itunes connection and Passcode problem (Please Help!!)

    So, my computer recently was broken beyond repair.. so when I got a new computer and redownloaded itunes i tried to connect my itouch to charge it and i noticed it said "Itunes cannot open ipod in library please imput password on ipod" I never put a password on it... aparently one of my friends did. So I was being a total DA and attempted to guess the password too many times now the ipod's disabled untill i can connect to itunes and itunes wont let me connect untill I get the password, I'm at a total loss please help!

    You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

  • Iphone 4s and iPhoto problem - please help me!!

    Hi there
    I have searched the discussion boards for an answer to my problem, but cant find one yet.
    I have a brand new imac with Mavericks installed and up to date. My iphoto is the latest one according to the app store and I have ios7.0.3 on my iphone 4s.
    I have about 300 photos on the iphone and i connected to the imac with a usb cable and it appeared as though all the photos were imported in the usual way, so i agreed to delete them off the iphone when prompted to do so.
    However, the events for the appropriate dates have been created, but they are grey and all claim to have 0 photos in them.
    When I look at last import, it says that the last import was the import I did a few days ago and appears to ignore the one I have just done.
    Please can anyon help me find where my photos are in a simple way. I am getting very cross and frustrated. I have used macs for 7 years with no problems until this.
    I would also add that my iphoto is very slow and regularly stops responding so that I have to force quit.
    Help appreciated!
    Thanks a lot
    Nick

    Thanks to LarryHN and Old Toad, my problems are nearly over, I hope.
    I did the repair and, thankfully, my missing photos are back.
    However, I now have about 100 photos which are on my iPhone 4s camera roll and when I plug the phone in, it says that it has already imported them, but I can't find them in iPhoto!
    I can see the pictures on the mac when the phone is plugged in and I look on the iphone, but I cant see where they are.
    Do you think that having photostream has complicated matters at all?
    Also, why does the photo stream on my phone (and ipad) show more photos than the photostream folder fir Nov 2013 in iphoto? Is there a delay in appearing in iphoto?
    Finally, about 3 out of 5 times, iphoto becomes really slow and stops responding, requiring a force quit. Any ideas why this is and how to fix it?
    THis is a great forum, thanks to everyone for help so far.
    Nick

  • G580 Very slow, and mouse problems, please help

    I purchased a brand new G580 approx 2 weeks ago. 
    It has 4GB of memory compared to my old lenovo which had 2GB.  This new one runs at half the speed of my old one and has nothing on it (i.e pictures, music, vids etc) 
    If i open a programme to do something and then open another, it cannot cope with it and will take forever to do anything on the 2nd programme when it eventually opens. 
    also the mouse wanders! I dont have to be touching it or doing anything near it, it just wanders across the screen which is getting very annoying. 
    Please could somebody help me? 

    Hi kiri_tc,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that your G580 Laptop is not performing as expected and the cursor is moving erratic, re-installing the Touchpad driver should resolve this issue and let me know the OS (Operating System) that is installed in the computer and the country where the computer was purchased, also the Type of G580 for providing the steps to resolve performance issue and exact touchpad driver link. Below is the link to locate the model number and Type of the computer which is mentioned on the sticker at the base of the Laptop.
    How to find the Serial Number (S/N) and Type of your computer
    Hope to hear back soon
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • TIGER/POWERBOOK 12" G4 - erase and install problems. please help..

    Hello,
    I have a powerbook g4 (the last of the powerbook 12"/ 80gb/1.5ghz to be released) with tiger installed.
    I have had a a crash x 2 when doing software updates. So I managed to get it going, to then back up to an external drive - to do an erase and install.
    Once I went to do the erase and install it failed, so I tried again and it seems to have done the erase. now my actual HD isn't visible as the select detination to install?
    So, I can't actually even attempt to install with no destination.
    any help would be most appreciated.
    thankyou

    suzannah-a:
    Unfortunately, it seems as if your HDD has failed. Try booting from the install disk, the go to the Utilities menu and launch Disk Utility. If the HDD shows up in the sidebar, you should reformat it. (Directions below). If it does not show up, you need to replace the HDD. Post back for a list of available HDDs and vendors, step by step directions and additional tips.
    If your HDD shows up follow these directions to reformat and erase:
    Formatting, Partitioning Erasing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    • Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • Click on Options button
    • Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
    • Click OK
    • Select number of partition in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    If you are able to do the reformat and erase, you can then proceed to restore from your backup, or to install the OS from disk.
    Please do post back with an update on how it goes, and with further questions or comments, if any.
    cornelius

  • Nested Repeater and Binding Problem - Please Help

    I have nested repeaters and binding seems to work with the
    outer repeater, but not with the inner repeater. I have boiled it
    down to a pretty concise case. If someone could offer hints I would
    be most appreciative!
    I understand the objects I am using to store data could be
    different, but it only looks strange because I had to boil down a
    complex case to a simple case.
    Type a user and then an email address then click to add them,
    the user TextInput and label gets created, but not the email
    address label and text input.
    Basically I want users in an ArrayCollection, and their
    multiple email addresses in an ArrayCollection stored in an Object,
    where I get that email ArrayCollection using the user as the key to
    the object acting as an associative array.
    The attached code should compile fine, so please have a go at
    this. Thanks!

    "Greg Lafrance" <[email protected]> wrote in
    message
    news:gn5p1k$cv9$[email protected]..
    >I have nested repeaters and binding seems to work with
    the outer repeater,
    >but
    > not with the inner repeater. I have boiled it down to a
    pretty concise
    > case. If
    > someone could offer hints I would be most appreciative!
    >
    > I understand the objects I am using to store data could
    be different, but
    > it
    > only looks strange because I had to boil down a complex
    case to a simple
    > case.
    >
    > Type a user and then an email address then click to add
    them, the user
    > TextInput and label gets created, but not the email
    address label and text
    > input.
    >
    > Basically I want users in an ArrayCollection, and their
    multiple email
    > addresses in an ArrayCollection stored in an Object,
    where I get that
    > email
    > ArrayCollection using the user as the key to the object
    acting as an
    > associative array.
    I wouldn't bind to methods like that...I'd make properties
    and bind to
    those.

  • E72 and email problem, please help me

    Hi There,
    when I want to setup me emails in E72, I do following steps:
    1) Select "@Set up e-mail" from home page of E72
    2) "Start" E-mail set up
    But the point is I have not bellow menue (#3) and E72 deal with my gmail or yahoo as other emails and I have to configure them manually!:
    3) It lists a number of email options as follows: Ovi Mail, Yahoo Mail, Google Mail, Windows Live Hotmail, Mail for Exchange, Lotus Notes Traveler, Other
    How can I solve problem?
    Thank you

    The way that worked for me, after suffering many times from trying to setup  my gmail account.
    1-Restore phone to factory settings
    2-Setup you packet data (mobile carrier) internet access (EVEN IF YOU HAVE WIRLESS LAN)
    3-Set up you email by adding your account and allow phone to use (mobile carrier)
    4-You could choose way of connecting to server (you could choose then wirless lan ) only if you want.
    Good luck and let me know if it works!
    Ahmed

  • Flash layer problem and sound problem - PLEASE HELP

    http://www.alamofireworks.com/echo/flash.html
    I am having an issue with the pulldown menu is going behind
    the flash file. I have already tried the param wmode and z-index
    and can't figure it out.
    Also the when you hit stop sound and the video loops the
    sounds comes back and i am not sure how to control.
    Any help would be appreciated.

    http://www.alamofireworks.com/echo/flash.html
    I am having an issue with the pulldown menu is going behind
    the flash file. I have already tried the param wmode and z-index
    and can't figure it out.
    Also the when you hit stop sound and the video loops the
    sounds comes back and i am not sure how to control.
    Any help would be appreciated.

Maybe you are looking for