Nokia N80 restore always fails after SW update

Successfully upgraded unbranded Nokia N80 to the below:
V 4.0623.0.41
26-07-2006
RM-92
Nokia N80 (05)
After update tried several times to restore phone content using genuine USB cable from two backups: one fresh incl. memory card and another 1 week old just the phone. PC Suite sometimes shows successful restore, sometimes a message that not all content was restored. The phone after restore always restarts with the message: "Phone will restart". No content is restored.
SW: WinXP SP2; Nokia PC Suite 6.81.13.0
Any advice will be appreciated.

Fixed by 10.4.4

Similar Messages

HT1414 I can't restore my iPod after proper update!What should I do?

I can't restore my iPod after proper update!It suddenly froze while updating. Now it is in restore mode and every time I try to restore it, it failes!Also bear in mind that I have no backups of earlier versions of my iPod in my pc, since I formated it a few days ago.Thanks for your time!

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Restoring purchased apps after software update through itunes

restoring purchased apps after software update through itunes

And....that's your question? How to restore the apps? Sync your iPad with iTunes and the apps should be restored to your device. Or go to the purchased tab of the App Store and tap on Not on this iPad and download them again.
Did you restore from a backup after you updated? Can you provide any information at all?

HT4623 how do i restore an ipad after an update?

How do I restore my ipad after an update?

Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad

SOLVED Key board and mouse fail after last update

Both my wireless keyboard and mouse failed after I updated yesterday. I'm using KNOPPIX to post they both work with knoppix so its not a hardware problem.
KDE 4.1
Logitech keyboard and mouse
Last edited by normc (2008-11-08 00:05:37)

Thanks a lot
Just want to add that I had to edit grub at start up and add "single" at the end of the kernel line.
The reason is that switching to runlevel 3 didn't work for me.

HT1386 every time I try to sync my phone and restore my content after I updated my iPhone, iTunes goes through the prompts and then says "cancelling sync" at step 5. I cannot restore my apps or music!

every time I try to sync my phone and restore my content after I updated my iPhone, iTunes goes through the prompts and then says "cancelling sync" at step 5. I cannot restore my apps or music!

when i try to sync my music which i have on my PC's itunes it will just not transfere on the phone. everything will sync [apps, videos, contacts] but the music will just not transfere.
and when i try to download the music from the phone's itunes store it will say "Error. Tap again to retry".
Thera are no more details i have! i have no idea why the songs will not sync and will not download!

HP 6180c always fails after each Apple/HP update

I have a HP 6180c All-in-One which is a lot like my old Jaguar car. When it works it is great.
My HP 6190c ALWAYS fails on scanning after EVERY Mac HP driver update. I have to uninstall (sounds like Windows) and reinstall the HP drivers, then all is well. That is until the next update, when this ritual is repeated all over. When I call HP they say to do exactly what I do and seem proud to tell me that. Anyone know of a real solution to this? Only the scan fails.

The HP updates are just like an update to iPhoto or iTunes and are not connected to any OS updates. For example, 10.6.1 didn't contain any updates to HP printers, but there was an HP update that came out around the same time.
If the OS updates are causing you problems, it could be that the printer queue is getting deleted and you just need to add the printer again from System Preferences.

Boot fails after security update

Greetings,
In installed the most recent security update this morning, and after restarting, my machine won't boot up.
I've followed the existing threads (in case you've also had this problem, the most informative was here:
http://discussions.apple.com/thread.jspa?threadID=1545171 )
Here's my machine's current state; I'd appreciate any input!
I booted to single user mode, and checked the disks using /sbin/fsck -fy . there were no errors reported.
I booted from my Install Disk 1, repaired the disk (again, no errors), and verified the disk.
Now, it still does not boot independently; it stalls at the apple logo. Safe boot does not work. It doesn't appear to be a PRAM or SMC issue.
What should my next move be? Thanks again!

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO or security update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.1 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Call fails after last update

Can anyone help me, after the last update from Apple to my iphone 3g I get call fail after call fail. It is getting embarassing at work where I rolled these phone out.

Standard troubleshooting is
1)Reset: reset your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
2)Restore as new or from backup: see page 141 of the manual for details...http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
Note the last sentence of the Restore paragraph... "In iTunes, you can also restore from a backup without deleting data stored on iPhone."
Message was edited by: paulcb

Mac App Store Connection Failed After Mavericks Update

Hi y'all,
immediately after I updated my Lion to Mavericks (10.9.1), I could not access no more Mac App Store: as I enter my (valid and active) Apple ID credentials, I receive a "Connection Failed" message (in red, in the same login dialog, under the user id field).
So I've tried to set to "Always Trust" all of my Class 3 Certificates in my Keychain, I removed all of the Mac Appstore plist files (appstore and storeagent), I've also tried to remove the network preferences plist file to reset my network interfaces preferences, I've also deleted the ocsp and crls cache files, and I've setup the ocsp and crls certificates preferences in my Keychain Access to off.
I obviously checked out my App Store account and it's correct and active - I'm also currently using it on my iPhone, iPad and iPod with no problem at all!
Anyway I wanted to try creating a new App Store account from the Mac AppStore itself: after I validated it, I tried to login into Mac AppStore... with no success!
So, NONE of the above mentioned attempts solved the problem, and I'm WORRIED and astonished wondering HOW APPLE COULD RELEASE A MAJOR O.S. UPDATE THAT SMASHES THE MAC APP STORE, WHICH IS ONE OF THE CORE APPS OF THIS O.S.!!! I use Mac OSes since many years and I never had O.S. problems (only some minor issue with third party applications out of Apple's scope and solved with some simple workaround).
CAN ANYBODY PLEASE HELP ME? :-)
THX IN ADVANCE,
DANI

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Old deleted pics always reinstalled after an update

Hi
Every time I update my phone I always do a back up first via iTunes and have to do the update via iTunes because I have a 5C with 8GB and can only update through iTunes because of lack of storage space.
The problem is, after the update, when my phone restores from the back up it always includes these old pictures from ages ago that I deleted ages ago.
I have checked iCloud online and deleted everything, and what is left is this
I think the old photos that keep reinstalling are in that 90.07KB but I cannot find a way of deleting them.
They aren't on my iTunes, when I go to iCloud.com nothing is there.
If I go to iCloud drive it says it is empty
I've been through iCloud on my phone and nothing there either.
My question is, how do I locate these old pictures and delete them permanently?
Thanks for any help you may offer

As I said earlier, I don't believe there are any photos stored on the device. Again, I believe this to be folder instructions, since you use photo stream. It could be instructions for who shares the photo stream, etc. The amount of data you report, and show in the photo is very small.
If it is worrying you that much, restore the device as new, and sync back your content manually, without using a backup. This would remove any content there may be on the phone and any other settings dealing with the photo library.

Hotsync fails after Microsoft update

I am using a Treo 650 (Sprint) and running WinXP Pro with Outlook 2002. Everything was working just fine until I got a message from Windows indicating that I needed to update Windows for a critical update. After the update I can no longer get my Treo 650 (Sprint) to connect for a hotsync. When I plug in the chord windows gives a recognition boop that new hardware have been detected; however, when I press the hotsysc button the hotsync fails indicating that it could not find the connection.
I have downloaded the latest software from Palm and installed it but that did not help.
Any help would be greatly apprecitated...
Post relates to: Treo 650 (Sprint)
Post relates to: Treo 650 (Sprint)
This question was solved.
View Solution.

You will need to do a "clean" uninstall of Palm Desktop. Here are the instructions.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
For Palm desktop 6.2, look in the following location for the folders and files, my documents, PalmOS desktop. You will find the username folder in this location.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done, you will need to delete some registry keys
from your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember. In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are
you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before you create a hotsync name.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=treo&mn=650&cn=sprint
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Lumia 1520 back light soft touch buttons always on after denim update

Hello i have installed dev prew in my lumia 1520 but no demin update was found, so i unistalled it then the update appeared. But now after the update my light sensor Works differently is less reactive and the back light of soft touch buttons is always
in also during battery save mode. Can you help me? Thanks

Hi, Damodred. For the best experience with the Lumia 1520 touch screen, we encourage you to set the touch sensitivity to normal. This can be done in the touch section of the phone's settings. To do this, go to Settings > Touch > Touch sensitivity > Normal. About the second concern, are you using the headphone that came with it? Does it happen regardless of the headphone that you are using?
We'll wait for you reply.

Live Migration Failed After Yum Update on 2.2.2

Hi,
I've live migrated vm's from node2 to node1 (master server). Put node2 into maintenance mode, then reconfigure ntp.conf to sync with our new ntp server. While in maintenance mode, I've also ran yum update which updated the kernel from 2.6.18-128.2.1.4.37.el5xen to 2.6.18-128.2.1.4.44.el5xen. In the process, xen was also updated from 3.4.0-0.1.32.el5 to 3.4.0-0.1.39.el5.
After rebooting, I've put node2 back into active mode. But now I can't live migrate the vm's back into node 2. From node1, ovs_operations.log:
"2012-06-23 11:03:28" INFO=> migrate_vm: vm('/OVS/running_pool/1210_vm05') start...
"2012-06-23 11:03:29" INFO=> xen_migrate_vm: migrate with ssl enabled failed, do failover(no ssl). vm('/var/ovs/mount/54DA5753709A48B3BFAEE65C2EAECCE0/running_pool/1210_vm05') -> tgt_srv('node2')
"2012-06-23 11:03:30" ERROR=> xen_migrate_vm: failed. vm('/var/ovs/mount/54DA5753709A48B3BFAEE65C2EAECCE0/running_pool/1210_vm05') -> tgt_srv('node2') =><Exception: xen_migrate_vm: migrate without ssl failed either.>
From node2 ovs_operations.log:
"2012-06-23 11:03:30" INFO=> ha_join_dlm_domain: =>success
"2012-06-23 11:03:30" ERROR=> ha_set_dlm_lock:failed. lock('6f1cb211-ecef-4ac6-af2b-091fc6fd5966') name('1210_vm05')=> <Exception: create lock('/dlm/ovm/f1cb211ecef4ac6af2b091fc6fd5966') failed. <OSError: [Errno 26] Text file busy: '/dlm/ovm/f1cb211ecef4ac6af2b091fc6fd5966'>
Is this due to the different xen versions after the update? How can I live migrate the vm's back to node2 so that I can take node1 into maintenance mode to reconfigure ntp.conf and run yum update?
Thanks!

The next thing to try is to work though the steps in [[Error loading web sites]]. Though if this is happening on all of your computers it might have something to do with your internet connection. Maybe resetting that will help.

Nokia C7 GPS not working after belle update!

Hi everyone, i had a C7, working great till i updated it with symbian belle.
okay here is what i did.
-my GPS was working on symbian anna with maps version 3.06beta
-i updated the phone to symbian belle from symbian anna.
-installed nokia maps 3.06 beta, and replaced the one that came with the update because it had the option of route planning which the installed map did not.
-this was the first time i checked to see if the GPS was working after the update, and it did not work even after i stood in an open field for half an hour.
-i learned that the latest update of nokia maps in fact had route planning, so i used the nokia PC suite to reset the phone software, and then later updated everything that was listed in the software update app.
-my GPS could still not work after i stood in the same damn field for another half an hour.
-now it will just give approximate positions based on the wireless networks, and not give any accurate position, so i cant use it for navigation anymore.
-i tried running the gpsinfoqt app, and it keeps saying searching for a signal, but it never finds one!
Please help me!! if there is any way i could flash the C7 or run a diagnostic or something so atleast i figure what is wrong!

Hi akkudub,
Welcome to Nokia discussions board!
Have you used Nokia Suite for the update?
I advise you to follow the steps below in order to get your GPS fully working again:
1) Uninstall the current version of Nokia Suite that you have.
2) Clean the registry with a registry cleaner.
3) On your PC, go to Start > Run and type %temp% and click on "Run". Delete all Nokia folders from the folder that opens.
4) Download the newest Beta version of Nokia Suite from this link:
http://betalabs.nokia.com/apps/nokia-suite-beta
You will need to sign in to your Nokia account - the same credentials used to log into this forum.
We will appreciate your feedback once you have tried this program!
Once Nokia Suite is installed, please connect your device to it and perform the available updates if any is available. Alternatively please reinstall the current software. Also, click on the Maps tab and download the relevant maps files (Europe, UK etc...)
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Nokia N80 restore always fails after SW update

Similar Messages

Maybe you are looking for