Nokia N800 Tablet - Cannot find a format which wil...

I am trying to play a movie on my N800 Tablet PC. I've tried all types of video extensions, but, continue to get error messages. Can anyone recommend a software program that will convert a dvd to a file that the N800 will recognize. Any help would be greatly appreciated as I would like to use this on my vacation.
Thanks so much!
Cheryl

Hi chercom
You could use video converter such as Slysoft http://www.slysoft.com/en/clonedvd-mobile.html or YASA:http://www.yasasoft.com/yasadvdtomp4/ which are just two examples.
Find something that you can try before you buy, you are usually limited to converting clip of a few minutes in length but you can check the results before purchase.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Nokia 9500 problem: cannot find specified server

After some deliberation, I have finally managed to connect my Nokia 9500 to the internet via the WLAN router in my home. So I can access websites ok, although it's slow and some of the webpage elements don't load. Anyhoo... my problem is with Real audio files now. For some reason, it won't download them to my phone when I click save, it just gives me the message "cannot find specified server" and doesn't download anything. I even get this message sometimes as webpages are loading, but after clicking "ok" it continues to load the page and seems to work fine. Anyone know what the problem could be? I'm using a T-mobile pay-as-you-go sim in my phone and my ISP is Tiscali. Thanks in advance.

Hi,
The problem is that your internal machines need to access the server's dns to resolve the host name.
2 steps.
1. Ensure that DNS in server.app is forwarding requests to your ISP dns server and that server is set to provide DNS
for some or all clients and that you have your DNS primary zone setup with a machine record for the server.
2. Change the DNS server address within network settings on all other devices to the servers tcpip address.
Hope that helps
Cheers
Gerry

I cannot find a document which I think I asked to save to icloud when I didn't have wifi so now only have .folder title and no content (pages document). How do I retrieve content?

Back in September, I typed over a document, duplicated it and renamed duplicate. I think I then clicked save when prompted to save to icloud. At this time I wasn't connected to the internet. Now I cannot find the document but have found a .folder with the same name as the document I created but this folder is empty. Is there any way of retrieving the content of that original document created in Pages?

I really don't understand.
The menu item is available :
Maybe, you didn't activate the tool :
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 23:10:17
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Arch on Bay Trail Tablet cannot find Sdcard

Hello fellow Archers!! I am new to the Arch Linux Forums (or any forum for that matter), and I hope I've put this post in the proper place.
I've been using Arch for about 2 years now, and I'm absolutely in love with it. Every chance I get, I try to run Arch on any device I have. This last Christmas, I received a Toshiba Encore Mini (Bay Trail) tablet from my stepdad and when I found out that it had an x86 processor, my heart skipped a beat. I knew what had to be done.
After a month of research and fun, I have successfully been able to boot Arch on this tablet. I am using the stock 3.18.5-1 kernel (latest as of this post) and GRUB for the bootloader. Arch currently resides on a USB stick, and I've been able to move GRUB into the EFI system partition on the internal memory of the tablet. I've setup GRUB to be able to dual boot Windows and Arch, but of course the Arch entry only works when I have the stick plugged in.
Although I've been successful, I've still had some issues. The internal memory in the tab is 14GB, 4GB of which belongs to the Windows recovery partition. I'd love to be able to boot Arch on this tab without having to plug in the stick through OTG, as it is susceptible to damage and prevents me from being able to charge, but 10GB total space is not really optimal for what I want to use this tablet for. Luckily, there's an external microSD slot on the side. I bought a 32GB microSD to put in there and I wanted to make it my /home partition. Alas, when I booted into Arch and got ready to add the card to my fstab, it wasn't there! Here's the output of lsblk, lspci, and lsusb:
https://dl.dropboxusercontent.com/u/989 … 094036.jpg
sda is the USB stick and mmcblk0 is the internal memory. The PNY in lsusb is the USB stick as well, the Logitech Unifying Receiver is my wireless keyboard/mouse, and the Genesys device is my USB hub.
I checked GRUB as well, and at the GRUB shell, ls turns up with:
(hd0) (hd0,msdos2) (hd0,msdos1) (hd1) (hd1,gpt4) (hd1,gpt3) (hd1,gpt2) (hd1,gpt1) (hd2) (hd3)
hd2 and hd3 are blank and GRUB won't let me set them as root. I have also formatted and used the microSd card before in Windows, so I believe it should at least show up with a partition, so I don't think hd2 or hd3 could be the card.
So, my question is, what should I do to get my sdcard recognized by the tablet? Windows sees it just fine, even in Win10 Technical Preview.
The tablet is a Bay Trail device and uses only 32-bit UEFI for booting. It has no BIOS/CSM support. Along with the PCI bus it sports an i2c bus and an sdio bus. My guess is that it has something to do with GRUB or the UEFI firmware, but I decided it would be better to ask some experts.
Any help would be dearly appreciated! And thank you for your time!
AlbinoJawa
--mod edit: changed img to url tags. Please see forum guidelines on image sizes ... and don't use images for text, post text. Trilby --
Last edited by Trilby (2015-02-11 13:54:21)

Thanks for your reply. And you are absolutely right, the wireless card is SDIO. It happens to be a Realtek RTL8723BS.
Here's the dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.5-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 30 07:17:14 CET 2015
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003afdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003afe0000-0x000000003b00ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003b010000-0x000000003b046fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003b047000-0x000000003b6d2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003b6d3000-0x000000003b989fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003b98a000-0x000000003bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb60000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x3b046000 ACPI 2.0=0x3b046014 SMBIOS=0x3b93b190
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000002000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000002000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem03: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000090000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x00000000018de000) (8MB)
[ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000018de000-0x0000000012329000) (266MB)
[ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000012329000-0x0000000020000000) (220MB)
[ 0.000000] efi: mem10: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000020200000-0x0000000032000000) (286MB)
[ 0.000000] efi: mem12: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000032000000-0x0000000032020000) (0MB)
[ 0.000000] efi: mem13: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000032020000-0x000000003675e000) (71MB)
[ 0.000000] efi: mem14: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003675e000-0x0000000037324000) (11MB)
[ 0.000000] efi: mem15: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000037324000-0x00000000373d6000) (0MB)
[ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000373d6000-0x00000000376a9000) (2MB)
[ 0.000000] efi: mem17: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000376a9000-0x000000003a9e0000) (51MB)
[ 0.000000] efi: mem18: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000003a9e0000-0x000000003ad40000) (3MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000003ad40000-0x000000003afe0000) (2MB)
[ 0.000000] efi: mem20: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000003afe0000-0x000000003b010000) (0MB)
[ 0.000000] efi: mem21: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000003b010000-0x000000003b047000) (0MB)
[ 0.000000] efi: mem22: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000003b047000-0x000000003b6d3000) (6MB)
[ 0.000000] efi: mem23: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000003b6d3000-0x000000003b93c000) (2MB)
[ 0.000000] efi: mem24: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000003b93c000-0x000000003b98a000) (0MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000003b98a000-0x000000003bff5000) (6MB)
[ 0.000000] efi: mem26: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003bff5000-0x000000003bff6000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000003bff6000-0x000000003c000000) (0MB)
[ 0.000000] efi: mem28: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem29: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem30: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed08000-0x00000000fed09000) (0MB)
[ 0.000000] efi: mem31: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffb60000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA TOSHIBA WT7-C/TOSHIBA , BIOS 1.20 08/18/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3c000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 03D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 03CE00000 mask FFFE00000 uncachable
[ 0.000000] 4 base 03CE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 03CD00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36000000-0x363fffff]
[ 0.000000] [mem 0x36000000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x35ffffff]
[ 0.000000] [mem 0x30000000-0x35ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x2fffffff]
[ 0.000000] [mem 0x20200000-0x203fffff] page 4k
[ 0.000000] [mem 0x20400000-0x2fffffff] page 2M
[ 0.000000] BRK [0x017c0000, 0x017c0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x377fdfff]
[ 0.000000] [mem 0x36400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x017c1000, 0x017c1fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3675f000-0x3731efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x3B046014 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x3B01C188 0000DC (v01 ALASKA A M I 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACP 0x3B03F000 00010C (v05 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: DSDT 0x3B029000 0110F1 (v02 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: TCPA 0x3B044000 000032 (v02 00000000 00000000)
[ 0.000000] ACPI: MSDM 0x3B043000 000055 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x3B042000 000176 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 01072009 AMI 00010013)
[ 0.000000] ACPI: UEFI 0x3B687000 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: OEM0 0x3B041000 000084 (v05 ALASKA BATTERY 00000003 AMI 0100000D)
[ 0.000000] ACPI: DBG2 0x3B040000 000072 (v00 ALASKA INTLDBG2 00000003 AMI 0100000D)
[ 0.000000] ACPI: HPET 0x3B03E000 000038 (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: LPIT 0x3B03D000 000104 (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: APIC 0x3B03C000 00006C (v03 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: MCFG 0x3B03B000 00003C (v01 ALASKA A M I 00000003 AMI 0100000D)
[ 0.000000] ACPI: SSDT 0x3B028000 000605 (v01 ALASKA CpuDptf 00000003 AMI 0100000D)
[ 0.000000] ACPI: SSDT 0x3B025000 0024A3 (v01 ALASKA DptfTab 00000003 AMI 0100000D)
[ 0.000000] ACPI: SSDT 0x3B024000 000058 (v01 ALASKA LowPwrM 00000003 AMI 0100000D)
[ 0.000000] ACPI: SSDT 0x3B023000 0000FF (v01 ALASKA SoCDptf 00000003 AMI 0100000D)
[ 0.000000] ACPI: FPDT 0x3B022000 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x3B021000 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x3B020000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x3B01F000 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x3B01E000 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[ 0.000000] ACPI: TPM2 0x3B01D000 000034 (v03 00000000 00000000)
[ 0.000000] ACPI: BGRT 0x3B045000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: CSRT 0x3B01B000 00014C (v00 ALASKA A M I 00000005 INTL 20120624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 72MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x017c2000, 0x017c2fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x3bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3afdffff]
[ 0.000000] node 0: [mem 0x3b98a000-0x3bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x3bffffff]
[ 0.000000] On node 0 totalpages: 242674
[ 0.000000] free_area_init_node: node 0, pgdat c1638ec0, node_mem_map f5fde020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 145 pages used for memmap
[ 0.000000] HighMem zone: 15960 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x3cf00000-0x3eefffff
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] e820: [mem 0x3ef00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 16 pages/cpu @f7663000 s33600 r0 d31936 u65536
[ 0.000000] pcpu-alloc: s33600 r0 d31936 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240898
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=LABEL=archtabroot rw
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1966072 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003c000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 878092K/970696K available (4591K kernel code, 500K rwdata, 1348K rodata, 592K init, 836K bss, 92604K reserved, 3460K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc164e000 - 0xc16e2000 ( 592 kB)
.data : 0xc147c0e8 - 0xc164c2c0 (1856 kB)
.text : 0xc1000000 - 0xc147c0e8 (4592 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:1024 0
[ 0.000000] CPU 0 irqstacks, hard=f580c000 soft=f580e000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x10
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 1331200 KHz
[ 0.000000] lapic_timer_frequency = 277333
[ 0.000000] tsc: Detected 1331.200 MHz processor
[ 0.000046] Calibrating delay loop (skipped), value calculated using timer frequency.. 2663.33 BogoMIPS (lpj=4437333)
[ 0.000054] pid_max: default: 32768 minimum: 301
[ 0.000069] ACPI: Core revision 20140926
[ 0.053987] ACPI: All ACPI Tables successfully acquired
[ 0.113436] Security Framework initialized
[ 0.113465] Yama: becoming mindful.
[ 0.113498] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.113506] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.113895] Initializing cgroup subsys memory
[ 0.113911] Initializing cgroup subsys devices
[ 0.113918] Initializing cgroup subsys freezer
[ 0.113926] Initializing cgroup subsys net_cls
[ 0.113932] Initializing cgroup subsys blkio
[ 0.113969] CPU: Physical Processor ID: 0
[ 0.113974] CPU: Processor Core ID: 0
[ 0.113982] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.123826] mce: CPU supports 6 MCE banks
[ 0.123840] CPU0: Thermal monitoring enabled (TM1)
[ 0.123856] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.124062] Freeing SMP alternatives memory: 20K (c16e2000 - c16e7000)
[ 0.125409] ------------[ cut here ]------------
[ 0.125424] WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:136 __early_ioremap.constprop.0+0xcf/0x173()
[ 0.125428] Modules linked in:
[ 0.125437] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.5-1-ARCH #1
[ 0.125442] Hardware name: TOSHIBA TOSHIBA WT7-C/TOSHIBA , BIOS 1.20 08/18/2014
[ 0.125446] 00000000 67e65060 00000000 c15d1f30 c1475573 00000000 c15d1f64 c10528d2
[ 0.125460] c1547940 00000000 00000000 c155cfa3 00000088 c1671764 00000088 c1671764
[ 0.125472] 00000001 3993d000 00043836 c15d1f74 c10529c2 00000009 00000000 c15d1fa0
[ 0.125485] Call Trace:
[ 0.125498] [<c1475573>] dump_stack+0x48/0x69
[ 0.125508] [<c10528d2>] warn_slowpath_common+0x82/0xa0
[ 0.125517] [<c1671764>] ? __early_ioremap.constprop.0+0xcf/0x173
[ 0.125525] [<c1671764>] ? __early_ioremap.constprop.0+0xcf/0x173
[ 0.125533] [<c10529c2>] warn_slowpath_null+0x22/0x30
[ 0.125542] [<c1671764>] __early_ioremap.constprop.0+0xcf/0x173
[ 0.125551] [<c11666c0>] ? __kmalloc+0x140/0x190
[ 0.125560] [<c167198e>] early_memremap+0xd/0xf
[ 0.125569] [<c1663897>] efi_bgrt_init+0x156/0x1a5
[ 0.125577] [<c16631b2>] efi_late_init+0x8/0xa
[ 0.125585] [<c164eb0d>] start_kernel+0x3af/0x3d6
[ 0.125594] [<c164e2cb>] i386_start_kernel+0x79/0x7d
[ 0.125612] ---[ end trace dfa5655dc07bff72 ]---
[ 0.125616] Ignoring BGRT: failed to map image memory
[ 0.131888] ftrace: allocating 19787 entries in 39 pages
[ 0.148429] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.149247] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.182258] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.182270] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.182274] ..... (found apic 0 pin 0) ...
[ 0.215276] ....... works.
[ 0.215281] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735G @ 1.33GHz (fam: 06, model: 37, stepping: 08)
[ 0.215312] TSC deadline timer enabled
[ 0.215357] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.215379] ... version: 3
[ 0.215383] ... bit width: 40
[ 0.215387] ... generic registers: 2
[ 0.215390] ... value mask: 000000ffffffffff
[ 0.215394] ... max period: 000000ffffffffff
[ 0.215397] ... fixed-purpose events: 3
[ 0.215401] ... event mask: 0000000700000003
[ 0.238883] CPU 1 irqstacks, hard=f5962000 soft=f5964000
[ 0.238891] x86: Booting SMP configuration:
[ 0.238896] .... node #0, CPUs: #1
[ 0.249929] Initializing CPU#1
[ 0.262029] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.268932] CPU 2 irqstacks, hard=f59e2000 soft=f59e8000
[ 0.268937] #2
[ 0.279958] Initializing CPU#2
[ 0.292288] CPU 3 irqstacks, hard=f5a30000 soft=f5a32000
[ 0.292296] #3
[ 0.303315] Initializing CPU#3
[ 0.315290] x86: Booted up 1 node, 4 CPUs
[ 0.315300] smpboot: Total of 4 processors activated (10653.33 BogoMIPS)
[ 0.316556] devtmpfs: initialized
[ 0.317051] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.317058] PM: Registering ACPI NVS region [mem 0x3b047000-0x3b6d2fff] (6864896 bytes)
[ 0.320354] pinctrl core: initialized pinctrl subsystem
[ 0.320421] RTC time: 11:22:14, date: 02/04/15
[ 0.320792] NET: Registered protocol family 16
[ 0.336066] cpuidle: using governor ladder
[ 0.349410] cpuidle: using governor menu
[ 0.349552] ACPI: bus type PCI registered
[ 0.349559] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.349764] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.349773] PCI: not using MMCONFIG
[ 0.350059] PCI: Using configuration type 1 for base access
[ 0.363787] ACPI: Added _OSI(Module Device)
[ 0.363794] ACPI: Added _OSI(Processor Device)
[ 0.363799] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.363804] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.407990] ACPI: Dynamic OEM Table Load:
[ 0.408019] ACPI: SSDT 0xF5892800 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.410325] ACPI: Dynamic OEM Table Load:
[ 0.410349] ACPI: SSDT 0xF5893000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.436908] ACPI: Dynamic OEM Table Load:
[ 0.436931] ACPI: SSDT 0xF5ACEE00 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.449788] ACPI: Dynamic OEM Table Load:
[ 0.449810] ACPI: SSDT 0xF5AA7F00 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.465500] ACPI: Interpreter enabled
[ 0.465524] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.465539] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.465551] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140926/hwxface-580)
[ 0.465564] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140926/hwxface-580)
[ 0.465585] ACPI: (supports S0 S5)
[ 0.465590] ACPI: Using IOAPIC for interrupt routing
[ 0.465651] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.478480] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.478488] PCI: not using MMCONFIG
[ 0.478525] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.483664] ACPI: Power Resource [USBC] (on)
[ 0.497002] ACPI: Power Resource [WWPR] (off)
[ 0.514841] ACPI: Power Resource [PLPE] (on)
[ 0.523308] ACPI: Power Resource [CLK0] (off)
[ 0.523427] ACPI: Power Resource [CLK1] (off)
[ 0.524214] ACPI: Power Resource [P28X] (off)
[ 0.524335] ACPI: Power Resource [P18X] (off)
[ 0.525314] ACPI: Power Resource [P28P] (off)
[ 0.525434] ACPI: Power Resource [P18P] (off)
[ 0.526177] ACPI: Power Resource [P28T] (off)
[ 0.526294] ACPI: Power Resource [P18T] (off)
[ 0.526735] ACPI: Power Resource [P1XT] (off)
[ 0.539163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.539180] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.539301] \_SB_.PCI0:_OSC invalid UUID
[ 0.539306] _OSC request data:1 1e 0
[ 0.539320] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.540055] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.540563] PCI host bridge to bus 0000:00
[ 0.540574] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.540581] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.540588] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.540594] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.540601] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.540608] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.540614] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.540621] pci_bus 0000:00: root bus resource [mem 0x50c00000-0x50ffffff]
[ 0.540627] pci_bus 0000:00: root bus resource [mem 0x3cf00001-0x3ef00000]
[ 0.540634] pci_bus 0000:00: root bus resource [mem 0x40000000-0x508ffffe]
[ 0.540640] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
[ 0.540659] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.540911] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.540936] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x503fffff]
[ 0.540955] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff pref]
[ 0.540973] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.541246] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.541277] pci 0000:00:14.0: reg 0x10: [mem 0x50800000-0x5080ffff 64bit]
[ 0.541361] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.541592] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.541623] pci 0000:00:1a.0: reg 0x10: [mem 0x50700000-0x507fffff]
[ 0.541640] pci 0000:00:1a.0: reg 0x14: [mem 0x50600000-0x506fffff]
[ 0.541746] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.541968] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.542248] pci_bus 0000:00: on NUMA node 0
[ 0.543163] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.543352] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.543537] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.543721] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.543906] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.544090] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.544274] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.544463] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.555294] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.555303] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.555309] vgaarb: loaded
[ 0.555313] vgaarb: bridge control possible 0000:00:02.0
[ 0.555607] PCI: Using ACPI for IRQ routing
[ 0.555614] PCI: pci_cache_line_size set to 64 bytes
[ 0.555640] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.555647] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.555652] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.555657] e820: reserve RAM buffer [mem 0x3afe0000-0x3bffffff]
[ 0.555940] NetLabel: Initializing
[ 0.555946] NetLabel: domain hash size = 128
[ 0.555949] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.555980] NetLabel: unlabeled traffic allowed by default
[ 0.556074] Switched to clocksource refined-jiffies
[ 0.570116] pnp: PnP ACPI init
[ 0.570274] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.570583] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.570592] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.570599] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.570606] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.570614] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.570623] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.570872] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.574716] pnp: PnP ACPI: found 3 devices
[ 0.580841] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.580850] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.580857] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.580864] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.580870] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.580877] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.580883] pci_bus 0000:00: resource 10 [mem 0x50c00000-0x50ffffff]
[ 0.580890] pci_bus 0000:00: resource 11 [mem 0x3cf00001-0x3ef00000]
[ 0.580897] pci_bus 0000:00: resource 12 [mem 0x40000000-0x508ffffe]
[ 0.580903] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed40fff]
[ 0.580962] NET: Registered protocol family 2
[ 0.581456] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.581498] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.581559] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.581598] TCP: reno registered
[ 0.581606] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.581622] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.581725] NET: Registered protocol family 1
[ 0.581764] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.582109] PCI: CLS 0 bytes, default 64
[ 0.582237] Unpacking initramfs...
[ 1.107952] Freeing initrd memory: 12032K (f675f000 - f731f000)
[ 1.108487] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x81f
[ 1.108504] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x81f
[ 1.108525] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x81f
[ 1.108544] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x81f
[ 1.108705] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.108743] apm: BIOS version 115.85 Flags 0x616f (Driver version 1.16ac)
[ 1.108747] apm: disabled - APM is not SMP safe.
[ 1.108833] Scanning for low memory corruption every 60 seconds
[ 1.109716] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.109753] Initialise system trusted keyring
[ 1.110326] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.114358] zpool: loaded
[ 1.114366] zbud: loaded
[ 1.114623] VFS: Disk quotas dquot_6.5.2
[ 1.114725] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.115019] msgmni has been set to 1852
[ 1.115160] Key type big_key registered
[ 1.115510] bounce: pool size: 64 pages
[ 1.115603] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.115704] io scheduler noop registered
[ 1.115713] io scheduler deadline registered
[ 1.115797] io scheduler cfq registered (default)
[ 1.116010] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.116059] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.116168] efifb: probing for efifb
[ 1.116207] efifb: framebuffer at 0x40000000, mapped to 0xf8880000, using 2400k, total 2400k
[ 1.116212] efifb: mode is 1024x600x32, linelength=4096, pages=1
[ 1.116215] efifb: scrolling: redraw
[ 1.116221] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.125771] Console: switching to colour frame buffer device 128x37
[ 1.135102] fb0: EFI VGA frame buffer device
[ 1.135131] intel_idle: MWAIT substates: 0x33000020
[ 1.135136] intel_idle: v0.4 model 0x37
[ 1.135140] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.135737] GHES: HEST is not enabled!
[ 1.135775] isapnp: Scanning for PnP cards...
[ 1.493311] isapnp: No Plug & Play device found
[ 1.493425] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.513751] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.514876] hpet: number irqs doesn't agree with number of timers
[ 1.515080] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20140926/evxface-643)
[ 1.515291] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.515334] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram
[ 1.515416] Intel P-state driver initializing.
[ 1.515628] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.515941] TCP: cubic registered
[ 1.516288] NET: Registered protocol family 10
[ 1.516821] NET: Registered protocol family 17
[ 1.517306] Using IPI No-Shortcut mode
[ 1.517672] Loading compiled-in X.509 certificates
[ 1.517708] registered taskstats version 1
[ 1.518206] Magic number: 3:263:377
[ 1.518346] rtc_cmos 00:00: setting system clock to 2015-02-04 11:22:15 UTC (1423048935)
[ 1.518672] PM: Hibernation image not present or could not be loaded.
[ 1.519092] Freeing unused kernel memory: 592K (c164e000 - c16e2000)
[ 1.519137] Write protecting the kernel text: 4596k
[ 1.519200] Write protecting the kernel read-only data: 1352k
[ 1.535163] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.569810] sdhci: Secure Digital Host Controller Interface driver
[ 1.569816] sdhci: Copyright(c) Pierre Ossman
[ 1.571445] sdhci-acpi 80860F14:00: No vmmc regulator found
[ 1.571453] sdhci-acpi 80860F14:00: No vqmmc regulator found
[ 1.577235] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 1.578463] sdhci-acpi INT33BB:00: No vmmc regulator found
[ 1.578470] sdhci-acpi INT33BB:00: No vqmmc regulator found
[ 1.581717] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 1.582000] sdhci-acpi 80860F14:01: failed to setup card detect gpio
[ 1.583014] sdhci-acpi 80860F14:01: No vmmc regulator found
[ 1.583019] sdhci-acpi 80860F14:01: No vqmmc regulator found
[ 1.586275] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 1.595348] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.638593] i8042: No controller found
[ 2.643888] ACPI: bus type USB registered
[ 2.643959] usbcore: registered new interface driver usbfs
[ 2.644012] usbcore: registered new interface driver hub
[ 2.644070] usbcore: registered new device driver usb
[ 2.646096] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.646116] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.646521] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.646552] xhci_hcd 0000:00:14.0: irq 87 for MSI/MSI-X
[ 2.647046] hub 1-0:1.0: USB hub found
[ 2.647077] hub 1-0:1.0: 6 ports detected
[ 2.648284] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.648296] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.648709] hub 2-0:1.0: USB hub found
[ 2.648732] hub 2-0:1.0: 1 port detected
[ 2.652883] Switched to clocksource tsc
[ 2.728296] mmc0: BKOPS_EN bit is not set
[ 2.764243] mmc0: new HS200 MMC card at address 0001
[ 2.769970] mmcblk0: mmc0:0001 S10016 14.5 GiB
[ 2.770907] mmcblk0boot0: mmc0:0001 S10016 partition 1 4.00 MiB
[ 2.771531] mmcblk0boot1: mmc0:0001 S10016 partition 2 4.00 MiB
[ 2.772247] mmcblk0rpmb: mmc0:0001 S10016 partition 3 4.00 MiB
[ 2.782585] mmcblk0: p1 p2 p3 p4
[ 2.845111] mmc1: new high speed SDIO card at address 0001
[ 3.010306] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.191248] hub 1-1:1.0: USB hub found
[ 3.192080] hub 1-1:1.0: 4 ports detected
[ 3.477659] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
[ 3.582031] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.594694] usbcore: registered new interface driver usbhid
[ 3.594712] usbhid: USB HID core driver
[ 3.604526] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input2
[ 3.650964] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
[ 3.659609] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input0
[ 3.660003] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:14.0-1.2:1
[ 3.755577] SCSI subsystem initialized
[ 3.762054] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 3.764073] scsi host0: usb-storage 1-1.3:1.0
[ 3.764661] usbcore: registered new interface driver usb-storage
[ 3.767041] usbcore: registered new interface driver uas
[ 4.768301] scsi 0:0:0:0: Direct-Access PNY USB 2.0 FD 0.00 PQ: 0 ANSI: 4
[ 4.778291] sd 0:0:0:0: [sda] 31384251 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 4.779597] sd 0:0:0:0: [sda] Write Protect is off
[ 4.779623] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 4.780584] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.794117] sda: sda1 sda2
[ 4.800057] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 5.545767] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 6.200252] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 6.201399] systemd[1]: Detected architecture 'x86'.
[ 6.218584] systemd[1]: Set hostname to <archtab>.
[ 6.868814] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 6.871762] systemd[1]: Starting Swap.
[ 6.872694] systemd[1]: Reached target Swap.
[ 6.872820] systemd[1]: Starting Root Slice.
[ 6.874884] systemd[1]: Created slice Root Slice.
[ 6.956411] systemd[1]: Listening on Journal Audit Socket.
[ 6.956532] systemd[1]: Starting User and Session Slice.
[ 6.957817] systemd[1]: Created slice User and Session Slice.
[ 6.957959] systemd[1]: Starting System Slice.
[ 6.959120] systemd[1]: Created slice System Slice.
[ 6.959265] systemd[1]: Starting Encrypted Volumes.
[ 6.959968] systemd[1]: Reached target Encrypted Volumes.
[ 6.960082] systemd[1]: Starting LVM2 metadata daemon socket.
[ 6.960976] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 6.961208] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 6.962738] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.962896] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.963200] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.963328] systemd[1]: Starting Journal Socket.
[ 6.964237] systemd[1]: Listening on Journal Socket.
[ 6.964406] systemd[1]: Started File System Check on Root Device.
[ 6.964968] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.968772] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.979321] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.979487] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.986979] systemd[1]: Started Load Kernel Modules.
[ 6.987458] systemd[1]: Mounting Configuration File System...
[ 6.990475] systemd[1]: Starting Apply Kernel Variables...
[ 6.993418] systemd[1]: Starting system-getty.slice.
[ 6.994454] systemd[1]: Created slice system-getty.slice.
[ 6.994572] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.994837] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.994972] systemd[1]: Starting Paths.
[ 6.995471] systemd[1]: Reached target Paths.
[ 6.995640] systemd[1]: Mounting Temporary Directory...
[ 7.000992] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.001751] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.001865] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.002477] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.002574] systemd[1]: Starting Journal Service...
[ 7.005032] systemd[1]: Starting udev Control Socket.
[ 7.005630] systemd[1]: Listening on udev Control Socket.
[ 7.005756] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.006328] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.006458] systemd[1]: Mounted FUSE Control File System.
[ 7.006545] systemd[1]: Starting Remote File Systems.
[ 7.012473] systemd[1]: Reached target Remote File Systems.
[ 7.012812] systemd[1]: Mounting Huge Pages File System...
[ 7.020078] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.025242] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.025346] systemd[1]: Starting udev Kernel Socket.
[ 7.030240] systemd[1]: Listening on udev Kernel Socket.
[ 7.030340] systemd[1]: Starting udev Coldplug all Devices...
[ 7.036726] systemd[1]: Mounting Debug File System...
[ 7.042658] systemd[1]: Starting Slices.
[ 7.046998] systemd[1]: Reached target Slices.
[ 7.047088] systemd[1]: Starting Setup Virtual Console...
[ 7.059126] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.101154] random: nonblocking pool is initialized
[ 7.111274] systemd[1]: Started udev Coldplug all Devices.
[ 7.167524] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.169842] systemd[1]: Started Setup Virtual Console.
[ 7.179786] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.189632] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.197395] systemd[1]: Mounted Configuration File System.
[ 7.205150] systemd[1]: Mounted Temporary Directory.
[ 7.212362] systemd[1]: Started Apply Kernel Variables.
[ 7.218715] systemd[1]: Mounted Huge Pages File System.
[ 7.224664] systemd[1]: Mounted Debug File System.
[ 7.293364] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 7.293420] systemd[1]: Started First Boot Wizard.
[ 7.293472] systemd[1]: Started Create System Users.
[ 7.293644] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.323464] systemd[1]: Started Rebuild Hardware Database.
[ 7.323649] systemd[1]: Starting Load/Save Random Seed...
[ 7.489855] systemd[1]: Started Load/Save Random Seed.
[ 7.607606] systemd[1]: Started Create Static Device Nodes in /dev.
[ 7.614814] systemd[1]: Starting udev Kernel Device Manager...
[ 7.621321] systemd[1]: Starting Local File Systems (Pre).
[ 7.625897] systemd[1]: Reached target Local File Systems (Pre).
[ 7.626032] systemd[1]: Starting Local File Systems.
[ 7.630162] systemd[1]: Reached target Local File Systems.
[ 7.630267] systemd[1]: Started Commit a transient machine-id on disk.
[ 7.630401] systemd[1]: Started Rebuild Journal Catalog.
[ 7.630562] systemd[1]: Started Update is Completed.
[ 8.020833] systemd[1]: Started udev Kernel Device Manager.
[ 8.204866] 80860F0A:00: ttyS1 at MMIO 0x50941000 (irq = 39, base_baud = 2764800) is a 16550A
[ 8.205668] 80860F0A:01: ttyS2 at MMIO 0x50947000 (irq = 40, base_baud = 2764800) is a 16550A
[ 8.321756] i2c i2c-1: Failed to register i2c client BYD3905:00 at 0x6e (-16)
[ 8.324424] i2c i2c-1: failed to add I2C device BYD3905:00 from ACPI
[ 8.341674] i2c i2c-4: Failed to register i2c client INT33FE:00 at 0x34 (-16)
[ 8.344363] i2c i2c-4: failed to add I2C device INT33FE:00 from ACPI
[ 8.349474] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[ 8.349484] mei_txe 0000:00:1a.0: PCI INT A: no GSI
[ 8.349755] mei_txe 0000:00:1a.0: irq 88 for MSI/MSI-X
[ 8.356485] ACPI: AC Adapter [ADP1] (off-line)
[ 8.360760] Linux agpgart interface v0.103
[ 8.360902] mei_txe 0000:00:1a.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[ 8.365783] ACPI: Battery Slot [BMBT] (battery present)
[ 8.420098] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 9.206103] systemd[1]: Started Journal Service.
[ 9.401823] systemd-journald[138]: Received request to flush runtime journal from PID 1
[ 9.466043] i8042: No controller found
[ 9.474007] wmi: Mapper loaded
[ 9.490439] [drm] Initialized drm 1.1.0 20060810
[ 9.506089] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 10.551449] dw_dmac INTL9C60:00: Missing DT data
[ 10.552139] i8042: No controller found
[ 10.557299] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 10.557312] [Firmware Bug]: No valid trip found
[ 10.557536] dw_dmac INTL9C60:01: Missing DT data
[ 10.560594] iTCO_vendor_support: vendor-support=0
[ 10.560826] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 10.691854] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 10.694349] nfc: nfc_init: NFC Core ver 0.1
[ 10.694399] NET: Registered protocol family 39
[ 12.066549] toshiba_acpi: Unknown symbol i8042_remove_filter (err 0)
[ 12.066858] toshiba_acpi: Unknown symbol i8042_install_filter (err 0)
[ 12.089760] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.089944] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 12.090611] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.172003] [drm] Memory usable by graphics device = 2048M
[ 12.172024] checking generic (40000000 258000) vs hw (40000000 10000000)
[ 12.172034] fb: switching to inteldrmfb from EFI VGA
[ 12.172114] Console: switching to colour dummy device 80x25
[ 12.172405] [drm] Replacing VGA console driver
[ 12.175568] i915 0000:00:02.0: irq 89 for MSI/MSI-X
[ 12.175607] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.175616] [drm] Driver supports precise vblank timestamp query.
[ 12.181333] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.241302] Probing NFC pn544
[ 12.252237] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.252512] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 12.252886] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 12.303371] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 12.370005] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[ 12.372327] fbcon: inteldrmfb (fb0) is primary device
[ 12.394866] mousedev: PS/2 mouse device common for all mice
[ 13.553744] Console: switching to colour frame buffer device 128x37
[ 13.570168] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.570177] i915 0000:00:02.0: registered panic notifier
[ 16.645849] intel_rapl: Found RAPL domain package
[ 16.645869] intel_rapl: Found RAPL domain core
Also, I installed i2c-tools, lm_sensors, and lshw a few minutes ago. They bring up nothing about an i2c bus or an SDIO bus.
I loaded up Device Manager on Windows and it lists all the controllers. It looks like the microSD is on the SDIO bus. Here's a picture:
https://dl.dropboxusercontent.com/u/989 … 114227.jpg
Again, thanks for your time!
-- mod edit: oversized image. Trilby --
Last edited by Trilby (2015-02-11 13:55:00)

Nokia Communication Centre cannot find my SMS/MMS

Hello
I currently have a Nokia n70, which I am replacing with a new model. However.
No Nokia software can find my sms/mms messages so I can take a backup of them.
Latest firmware version on the phone: v 5.0705.3.0.1
Latest version of PC Suite.
Windows 7 RC.
I can sync my phone with windows and everything works perfectly. (Contacts, notes, etc etc)
When I open Nokia Communication Center however, It just says: "getting messages" 0% (translated to english, so might differ) And then it just dissapears...
Nokia Photos just finds my photos and videos. But no texts..
When I try to take a backup of the messages (Everything else works just fine) I just get a "!" And nothing is backed up.
I can enter my sms and mms just fine on my phone.
The problem has been there for a while, but I have basically just ignored it. Since I was using the phone after all, and didn't really miss them. (In other words, same thing happened with Vista / Xp, so I doubt the reason is that I am using Win7)
I have ~2000 sms files, and ~50 mms files.
I am getting pretty desperate and willing to try anything. Quite a few of the messages are very personal and dear to me, so I would do anything to save them..
Maybe some application which can save messages in a .csv file?
Anything
Best regards.
Message Edited by mrkv on 22-Jun-2009 11:31 PM
Solved!
Go to Solution.

Hi. I had the same problem with my N70. This solved it (Nokia FAQ site (Australia) for PC Suite). Just follow the 5 steps listed and everything should be fine:
Q: Sending of short message with Nokia Text Message Editor fails.
A:
Check the connectivity between your phone and PC. If the connection is fine, and other PC Suite applications work without problems, check your phone's operating system (ISA or Symbian) from www.nokia.com or from the phone's user guide.
If your phone's operating system is ISA (Series 40), check that your message settings are correct. Contact your local phone operator for more information.
If your phone's operating system is Symbian (S60, Series 80 or Series 90), check that the PC Suite Support file is installed in your phone. The PC Suite Support file is an add-on application for PC Suite usage with contacts and messages. You can check it from the phone's application list. See your phone's user guide for more information. In your situation, the PC Suite Support file might be corrupted or too old for the PC Suite version you are currently using. Do as follows:
1) Disconnect the phone from the PC.
2) Uninstall the PC Suite Support file from your phone.
3) Reconnect your phone to the PC with the Get Connected wizard (on the PC Suite main window).
4) PC Suite detects that the PC Suite Support file is missing and advises you to install it.
5) Follow the instructions on the phone's display.
Cheers.

I cannot find my downloads which I paid for from an application.

I recently bought some media from an app which was free. They have come up on my latest purchases on my credit card.
I can't find them as downloads on the iphone or the computer (when I have sunc the phone to the computer).
If I go to the app and go to the item I bought, the only way to access it is to press the the BUY button again.
Where are the downloads kept on the iphone?

It has possibly saved to the Photos app, but depending on what the format of the videos is, it may not be playable on the iPad.

Xbox360 cannot find my router, which is a WRT54GS v.6

Can someone help me set up my router so it will be able to find it.
I tried using some tactics found here
http://forums.linksysbycisco.com/linksys/board/message?comm_cc=US&comm_lang=en&board.id=Wireless_Routers&message.id=53331&query.id=77031#M53331
but it was no luck
Thanks
Devin
Solved!
Go to Solution.

upgrade the firmware on the router and then reset your modem and router after upgrading (use the little buttons on the back of the modem and router)
and use the port forwarding for ports 88 and 3074 (not port triggering)

Itunes for Windows 7, cannot find the album which was imported to my library

Tried to import an album from a CD to my iTunes library. The iTunes dislogue box said the music was imported but it is nowhere to be found in My iTunes Library. I attempted to download the CD again and the dialogue box said it had already been imported. Where is it ??? The operation system is Windows 7. And, I have had no such porblems in the past.

The first thing I would try is Missing Artist or Album not with others by same artist. I've also seen reports of people compaining that the Music section of iTunes doesn't list all their content. For some reason adding a new track such as the current iTunes Single of the Week is proposed, and even confirmed, as a solution, though to be honest I can't see why it would make any difference.
If you make a smart playlist that should match your recent addition does it show up in that?
tt2

Presenter cannot find publisher 2010 on a PC running Win7?

Help please...Presenter cannot find publisher 2010, which is installed on my PC with WIn7 OS please advise

I can only respond to your original postings about Microsoft Publisher. Did you really mean Office? You threw us for a loop since we have no connection with Publisher!
If you have Microsoft Powerpoint 2010 32-it version installed, then Adobe Presenter 7.07 will install in trial mode. make sure you are using the Presenter Trial from this webpage:
http://www.adobe.com/products/presenter/
If you wanted to install the trial and you ran into this error, it usually means you used an older version of Presenter which did not support Office 2010. It also would occur if you installed MS Office 2010 64-bit version. Microsoft does not recommend end-users use the 64-bit version of Office. They recommend 32 bit Office. Please check that version.

HT201303 Please help me to check my acc: i cannot find where i can change the question security.

i cannot find the button which i can change the question surcurity. please help me
<Email Edited by Host>

http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

Sky+ android app cannot find Sky HD box

Can anyone help? Since switching to BT and using the Home Hub 3 my Sky+ app on my android tablet cannot find my Sky HD box on my network. The Sky HD box has a wired connection (via a switch and Home Plug). The tablet obviously connects wirelessly. Sky Tech Support cannot offer any solution. The Zeebox app running on the same tablet can connect and switch channels reliably so it is not a physical connection problem. Very frustrating......

Same problem with my iPad, using a Home hub 3. I have also noticed that after time my Airplay printer cannot be found. Only solutions I have found are I) to reset the Sky box internet connection(works sometimes) or ii) reboot the router ( seems to consistently work). Very frustrating and given it is happening with two different pieces of kit, clearly a router problem.

"cannot find file" after formatting and moving!!

Wanted to have iTunes library included in Time Capsule backup. So had to reformat external hardrives where all my songs are from Windows do OS. Copied everything on other HD, reformatted HD with OS, copied back all songs. HD still has same name "MUSIC", but iTunes cannot find files.
Changed in iTunes preferences the location of files to ensure it searches in the right place AND also replaced with text editor in "iTunes Music Library.xml" file all links with new address of HD (now after reformatting to OS I found it to be slightly different despite still same name).
But iTunes still cannot find the files. Everything is the same as before, HD name, directory structure, file names, etc. ONLY difference is it all is on "OS formatted" drive. Don't want to lose ratings and playlists of over 15,000 songs....is there still a solution?

The moment I "drag out" the Tunes Library File, then there is nothing left there, and when I open iTunes it is empty.
That's as expected. That file is the database iTunes uses that keeps track of everything, so when you then launch iTunes, it's starting from scratch.
I can import the Playlists from the XML and they do appear, but still no songs, all is empty. If I try to reimport from the new location, then they "do not fit into the playlists", meaning ratings etc. are lost.
Then you apparently didn't get the XML file edited properly; it's not easy to do.
Why does the simple location function in iTunes Preferences not work?
It does, when used as designed. The preference is where new additions (imports & purchases) will be stored. It does not change the location for existing files.
Put the original library file back. Then launch iTunes, Get Info on a representative track, and look at the path to where it thinks the files should be and compare that to the actual path. Any difference at all will break things. If there are differences (drive name slightly different, any difference in folder names/structure, etc.; letter case counts), try correcting them in Finder and see if that gets things working again. If not, then you'll have to use the Add to Library command to get back your tracks which will lose all your ratings, etc.
Where does iTunes save the links to the original files so it can simply be changed?
In the iTunes Library file, which cannot be manually edited.

Sometimes "Safari cannot find the Internet plug-in" which I've installed!?

The page: "http://www.example.com" doesn't load the content because the message "Safari cannot find the Internet plug-in".
Although, I already have this plug-in: Microsoft® Windows Media Player. What to do?
Try this: http://lamega.lamusica.com/player.shtml
Message was edited by: iAyan

Just wondering if anyone can help....I do not have a Mac so am finding it difficult to test.
I have just published an online magazine which was initially in the .dnl file format, which has come to light that mac users cannot view.
To try and resolve this I created an .exe file but it would seem that most mac users cannot view this either as they do not have virtual pc etc... which is required to view the .exe file.
I have now created a PDF version which has satidifed some people on macs temporarily but trying desperately to offer something to mac users I thought I had the answer, by uploading the magazine to a browser so it does not require downloading.....but:
The first person to try it out for me got: Safari cannot find the Internet plug-in and on trying to obtain one it could not find one.
I really thought it would work as you do not need the .dnl reader until you try to save the book or detach it to view it on screen.
Does anyone know if there is a way to view the content in a web browser????
Any help would be much appreciated as I do not want to leave the Mac users out.
Here is the link incase anyone fancies trying it for me....any feedback would be appreciated.
http://www.stickfightermagazine.co.uk/stickfightermagazinevol1issue1.htm
Thanks in advance.
Best regards!

Nokia n800 internet tablet

Can anyone help me to find tha latest os2008 update. Want to start using my old tablet again but unable to because of some bugs. Tried to find the rx-34 .... firmware to download but that was impossible, there's no place where it's left for downloading. Please someone (or Nokia) help!

I updated my N800 late last year and i was able to find the OS2008 update and update using the nokia Internet Tablet Suite update wizard, or whatever it was called lol. Google is your friend here, but it was on the official Maemo repository if thats any consolation.

2320c-2b , cannot find support on Nokia sites

I recently bought a 2320c-2b & I cannot find anything on official Nokia sites about it
I would like to get a data cable for it & put my contacts on it from my N85 if possible
Where oh where is any information about this model ?
Is there an equivalent model. I did notice that the data connector is the same as the 1600b model & that the data cable for
CA-45 USB Data Cable For Nokia 1110 6060 1600 6030 2610
would this cable also work with the 2320 ?

Like you I have a wonderful Sister in America that wanted to surprise me with a little Gift. A Nokia 2320C-2b. I however live in Saint Lucia and we must utilize the Sim Cards of companies that want a dollar for ever little thing even though you are continously spending money on their prepaid system. I have been seeking the Restriction Codes to this Little Gift that just Keeps on Giving me a Serious Headache. CAN ANYONE PLEASE GIVE ME THESE RESTRICTIONS CODES TO THIS PHONE!
The phone only cost $30.00 US dollars there in the US, and here these people want to charge me $200.00 just to unlock the phone, which will allowme to be able to utilize my Digicel Sim Card. Help Me. Help me please. You can send me the Restriction codes to my email. [email protected]

Nokia N800 Tablet - Cannot find a format which wil...

Similar Messages

Maybe you are looking for