Nokia N82 GPS Hardware Address

Greetings,
Is there any means of checking the GPS hardware address(12 digit) on the Nokia N82?
Any comments would be appreciated.
Thanks in advance.
..Jeff

@viper
Can you please explain me this a little bit better?
How to do this?
I put NOKIA in my Car GPS and GPRS are turned ON and what to do next?
I would like to have 'some' program on my desktop PC (or mebie on other NOKIA N82) where i can track where is my mobile phone.
Please help how to do this.
Vladimir

Similar Messages

Nokia N82 GPS Tracking???

Hello,
Is there any program for GPS tracking?
For example if i put Nokia N82 in my car can i track some how over the Internet (gprs) where my car is?
Or maybe with other N82 Nokia phone.
Please geave me some solution.
Regars,
Vladimir
Message Edited by vradovic on 10-Feb-2008 03:20 PM

@viper
Can you please explain me this a little bit better?
How to do this?
I put NOKIA in my Car GPS and GPRS are turned ON and what to do next?
I would like to have 'some' program on my desktop PC (or mebie on other NOKIA N82) where i can track where is my mobile phone.
Please help how to do this.
Vladimir

Nokia n82 gps version 2.0

I updated my maps on my phone to version 2.0. It seems like I can't operate the GPS (like showing the route or simulate the route) unless I purchase their Walk/Drive license. Before I updated the maps/gps, I was about to see where to go, and simulate the route and where the arrows were pointing to. Now I can't do any of that. Why is that the case?
Thanks!

Map v2 for Singapore, used the search function to identify origin and destination, added to a route, but unable to generate the routing. Error message no route found.
This feature worked fine in v1.

Nokia N82 GPS

Hi
After selecting routes its giving option of purchase if cancelling that then it cancel the whole route. So what is solution

You need to purchase a license in order for the turn by turn routing to work unfortunately
You can track your position for free though.
Nokia N95
V 20.0.015
0546553

Nokia N82 freezes

I have a Nokia N82, while it is a great phone, the OS on this phone leaves lot to be desired. This is from my 2 months of experience with this phone.
I have Nokia Maps application, which occasionally freezes the entire phone. None of the buttons work, including the power button. All I can do to get back on track is to remove the battery and put the battery back. Such a bad solution. Power button, like in PC should work even if the OS hangs - but it does not behave right on this phone.
Now, this problem could be due to hardware problem, so I decided to find out more on this. I took the Nokia Maps application and then removed(took backup on the PC) couple of the .sis files which were there on the memory card. After this, I could consistently reproduce the hang on the phone when I clicked on the Extras->Guides option in the Maps application. Replacing the .sis file back lets the Guides option work like a charm. What it tells me is that, if the application fails to find a file, it just hangs the entire phone - some thing that would remind me of the horrors of Windows 95. Yes, the nokia OS is yet to catch up with time. Surprisingly, I could keep the menu button (it is the only key that responds in this scenario) pressed to get the "list of applications", but I can't still close the application. Come on Nokia, I would expect power button press to get a higher priority than the Menu list button press.
The biggest problem with this phone is that if the memory card gets corrupted or some files get corrupted, then the entire phone will freeze, instead of the application freezing.
Agreed, it is a feature rich phone - but if it is not stable, it would rather turn more people off.
Solved!
Go to Solution.

I had problems with Nokia Maps 2.0 freezing on me (just as you described above). All my Maps issues disappeared when I switched off Assisted GPS (AGPS). The phone takes a little longer to get a satellite lock but there are no more lock ups or crashes.
Maps > Options > Tools > Settings > Internet > Go online at start-up > No
and also,
Menu > Tools > Connectivity > GPS data > Options > Positioning settings > untick 'Assisted GPS' and I also unticked 'networked based', so that only Integrated GPS is ticked.
Worked for me.
*EDIT*
I do agree with you though, I would like a power button to work when the OS has crashed completely. It's very frustrating that a frozen or hung handset can't simply be switched off using the button instead of a complete battery removal.
S.
Message Edited by steve_p on 07-Sep-2008 09:15 PM
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

Nokia N82 Time Date RESET

why every time when i turm on my phone , ask me to enter date and time? .. whitout take off the battery?! its annoying. plus, i need the alarm and its not working if always get reset. Please HELP!!!!!!!!!!!!!!!!!!!!!!!

I also have a N82 v.20 with the same problem. Is it acctually a hardware problem? Is there acctually a auxiliary battery in the engine module? I didn't saw that kind of a thing on Nokia N82 Disassembly guide video. Please is there any way to recover it without changing auxiliary battery? Becasue on my N82 silver (Finland) the LCD is originally pasted in to the main frame assy. There is a risk to remove it.
Ps:-
I tried some other way..... I turned off the device and fully charged it. But after I didn't power it up And againg I charged it......It chrged a little while and fully charged. Then I turned it on after 24 hrs. The porblem was gone. But after certain time.... the problem was came back.....what is this???
~Exploring new views~

Problem with WLAN in Nokia N82

I can't set correct key in settings for WLAN connect.
Access Point use Pre-Shared Key Format: Hex (64 characters)
Phone allow to input only 63 characters.
Model of Phone Nokia N82.
Can anybody help me in this problem?
Solved!
Go to Solution.

Hi,
It appears that Nokia haven’t implemented the standard fully. According to our router the Pre-Shared Key Format should be either 8-63 characters OR 64 Hex digits.
See the section on “Security in pre-shared key mode”
http://en.wikipedia.org/wiki/Wi-Fi_Protected_Access
But the N82 is only accepting the 8-63 character setting not the Hex option.

WARNING:IP: Hardware address '02:bf:0a:d0:00:2a' trying to be our address

Hi,
When my system boots up the following error message is prompted:
WARNING:IP: Hardware address '02:bf:0a:d0:00:2a' trying to be our address
I perused documentation and it states that this occurrs when the ATM lane device is set to promiscuous mode by running snoop -d lane0. The corrective action to be taken should be to not ket the ATM lane device rin in promiscuous mode & not to ignore the warning.
What I want to know is how to implement the resolution?
Thanks!

Ok, my mistake.
So that PC is also trying to use 192.168.0.1.
And it must be doing arp broadcasts on the LAN.
Solaris should probably be ignoring them since it has an 10.x.x.x address on the lan. So it shouldnt care about 192.168.0.x addresses on the LAN.
Only on the crossover network.
But apparently it cares anyway.
So I suggest you change the cluster heartbeat addresses to something else thats less likely to be chosen by random computers on your lan.
Or figure out why the PC is trying to use 192.168.0.1. It could be someone running vmware or virtual box.
Or vlan you lan, so your critical servers arent sharing a network with random poorly configured PC's.

Problem with Nokia N82

Hi there , I have a Nokia n82 with firmware V20.0.062 , when i go to nokia update webpage it said that there is update for my divice to 30.0.019 and i want to update it but when i connected it to PC and use nokia updater it said the latest version of your divice is 20.0.062 and you can not update , please help how can i update my firmware? thanx in advance

was it originally locked. firmware is released according to your product code (found under the battery) this varys country to country and network to network.
mainly if your handset was a network branded handset, then they have not agreed for the new firmware to be released for your product code.
Blackberry Bold

Sun Trunking 1.& kern Warning Hardware address trying to be our IP addresse

Using Sun Trunking 1.3 on a solaris 10 11/06 V490 server.
setenv local-mac-address? is set to true
Obviously server Aggregate MAC address corresponds to first NIC local MAC address. Second NIC has its specific MAC address.
Aggregate seams OK (traffic continues undisrupted when unplugging a card)
but :
1) Should I worry kernel is logging from toime to time messages such as :
WARNING: IP: Hardware address '00:14:4f:3b:60:f4' trying to be our address IP_address !
2) There is no load balancing between the 2 NIC interfaces as reported by nettr -stats 0 interval=2
Traffic always flows using NIC 2.
Appreciated,
Lor.

That depends on the switch.
SunTrunking 1.3 is compatible with Cisco EtherChannel for example. I believe there's a manual configuration on the switch to say that these two ports are participating in an etherchannel linkage. SunTrunking is an 802.11ad protocol. If they haven't done that, then the switch is just assuming the two ports are normal and have separate hosts behind them.
If instead of SunTrunking you were using Solaris 10 Link Aggregation, then you'd ask the networking guys to turn on LACP, which sets up a communication so the devices can describe their trunk/network setup. SunTrunking doesn't let you do that.
What interfaces do you have on the Solaris box?
Darren

Hardware address trying to be our address

We get this kern.warning approximately every 3/4 of an hour.
WARNING: IP: Hardware address '08:00:20:c4:1f:e8' trying to be our address 192.168.001.001
I found a description on sunsolve. What confuses me with this is the fact, that not only 192.168.001.001 is our address but 08:00:20:c4:1f:e8 is our hardware address too.
Has anyone made some experiences with this?
Thanks in advance
Frank

If you are trying to use SunTrunking or link aggregation, yes, the switch or network device must be configured to support it as well.
Otherwise one link sends a packet, the switch doesn't realize the links are to the same logical interface and returns the packet on the other link. The host sees the return packet and complains about an IP conflict.
For SunTrunking you probabaly have to configure etherchannel (or the equivalent) manually. For link aggregation you probably want to configure LACP to get the link correct.
Darren

WARNING: IP: Hardware address '08:00:20:c4:1f:e8' trying to be our address

""ERROR""
WARNING: IP: Hardware address '08:00:20:c4:1f:e8' trying to be our address 192.168.001.001
I have 2nodes of Sun solaris9 and both are configured in Veritas Cluster. The cluster nodes have 2 heartbeats connected cross.
The cross cables are connected with the below IP's
LAN1 of node1 192.168.2.1
LAN2 of node1 192.168.2.2
LAN1 of node2 192.168.1.1
LAN2 of node2 192.168.1.2
All the above LAN are connected with cross but still there is ip conflict message in the dmesg. The error is mention above

Ok, my mistake.
So that PC is also trying to use 192.168.0.1.
And it must be doing arp broadcasts on the LAN.
Solaris should probably be ignoring them since it has an 10.x.x.x address on the lan. So it shouldnt care about 192.168.0.x addresses on the LAN.
Only on the crossover network.
But apparently it cares anyway.
So I suggest you change the cluster heartbeat addresses to something else thats less likely to be chosen by random computers on your lan.
Or figure out why the PC is trying to use 192.168.0.1. It could be someone running vmware or virtual box.
Or vlan you lan, so your critical servers arent sharing a network with random poorly configured PC's.

Edit Nokia Maps GPS waypoints

Hi!
Is it possible to edit the Nokia Maps GPS waypoints on a PC?
Tks in advance!

@everton_cwb
Welcome to the forum!
If you have created route upon device you can always synchronise it with Ovi, then go to maps.ovi.com and add waypoint to existing route and re-synchronise back to device if that is what you mean.
Happy to have helped forum with a Support Ratio = 42.5

Nokia N82 , problem with contacts

I have a nokia N82 ,
but the problem is ,suppose i have a contact saved as michael and no. is suppose 8768655435.
When Michael calls it displays both the name and the number ,it exposes the contact no. which i dont like ?
I want to set it as only name should appear and not the no.
any help any 1
plz let me know

I don't think so that you could actually do it. And please don't give details like mobile no. in public forums.
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?

Nokia 5800 GPS Edition

Dear Nokia Users,
Is it possible to turn off the vibration for the Nokia 5800 GPS Edition/5800 when touching the keys on the phone? Grateful if someone could advise.
Thanks,
Ray

Menu>Settings>Personal>Profiles>General>PersonaliseTouch screen vibration>Off
(You could need to repeat this for other profiles that you regularly use).

Nokia N82 GPS Hardware Address

Similar Messages

Maybe you are looking for