Nokia N82 wifi problem after firmware update

Phone is restarting while connecting with WAP
and invalid server name while putting wep key

23-Nov-2006
03:11 PM
mobile_maniac wrote:
Ishvin, I'm sure I've read somewhere that the firmware on your phone can't be downgraded.
One question though... if the old 100% used to hurt your ears, do you really need the old volume levels back?! That may even be the reason it has changed if Nokia thought the same thing... I'm sure they wouldn't want you sending them a bill to get your hearing fixed! :-)
yes this is true but stil i want it loud enough so i can't hear it outside. i just hope they put the volume back up on the next firmware

Similar Messages

  • Nokia 5800 Screen Problems After Firmware Update V...

    Hi all,
    I have the Nokia 5800 navigation edition. I just updated the firmwareon it from V40. to the latest available 51.2.007. Doing so has turned the phone's screen into a huge mess - the lower half of the screen is all white and the upper half has some weired flickering and the icons(the ones that are visible) are all messed up too and some of them are not responding at all.
    Heres what I've done to resolve the problem:
    - remove the battery, memory and sim cards for a few hours.
    - reboot the phone without the memory card(eliminating any corrupt setup files).
    - reinstalled the V51.2.007 update several times using bothe the Ovi Suite and the older Nokia PC Suite updater.
    - tried running the updates on all XP, Vista and Windows 7.
    Can you please advise me of any other possible solutions I can try. Is there any way to revert back to the older firmware. The phone was working just fine before the update.
    Thank you all for your help.

    There is another way to hard reset your phone and it is as follows.
    With your phone powered off, press and hold Green  + Red + Camera Keys. Then power on phone using the on/off button whilst keeping the three keys depressed until you see the Nokia Shaking Hands Logo.
    Always remember to backup your phone before performing resets as your data may be lost.
    This reset will revert the phone to its out of the box state, so it will revert back to the original version of Maps that came with the phone. However, this should be an issue as you can easily redownload and reinstall the latest again.

  • Problems after firmware update 52.0.007

    Hi,
    I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
    But now I have following problems:
    I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
    The Radio app. is gone
    Does anyone has a solution for this?
    Iwan

    It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
    Happy to have helped forum with a Support Ratio = 42.5

  • C3-01 Problems After Firmware Update

    After updating the firmware from v5.65 to v6.0 the phone lost some features -namely:
    Chat
    Media Player
    Ovi Store
    "Favorite Contacts" on homescreen
    default wallpapers
    Solved!
    Go to Solution.

    Finally, I've fixed the problem!
    Going back, I updated the phone from 5.65 to 6.0 via OTA(over-the-air) update -in other words, I updated the firmware using the phone while connected to my home wi-fi network.
    In desperation to find a solution, I hesitantly re-updated the phone... But this time via PC.
    I opened Ovi Suite and updated the phone -again, expecting it would reinstall version 6.0 .
    After the update, all the apps that I've lost came back.
    I then checked to confirm if it was indeed version 6.0 -alas, it was not... It was version 6.05.
    Now, everything is working as it should be; mail, chat, ovistore, calculator, favorite contacts on homescreen -everything!
    It feels good to figure it out all by myself.  Hehehehe!!

  • Audio in problem after firmware update

    hey all,
    I've recently started using garageband to record and play around with my music, and I love it. Unfortunately, after installing the recent firmware update, my computer's audio in jack doesn't work anymore. It recognizes that there's something plugged in, but instead of having an signal, I get this clicking that clips the audio input at almost any input volume. I have tried it both with my bass and just the cable, and I have also just plugged some headphones into the jack- same results for everything. Is there anything i can do about it or do I just have to wait for another firmware update before I can use garageband again?
    2.2Ghz Macbook Pro   Mac OS X (10.4.10)  

    well what happened was I was updating iTunes (7.3.1) and the updater said a quicktime update and a firmware update were both available so I downloaded and installed and now the problem. It's like a really fast click track when I plug in and it's not just in garageband, I'm getting it in the audio-in option in the system preferences menu. Do you think doing a system restore would solve this problem?
    PS- I believe the update was something along the lines of a "kmbp firmware update" I think that's what it was called... :/

  • Overheating problem after firmware update

    Hi,
    A friend of mine noticed a CPU temperature increase in between 10 and 15 per cent, after the MacBook EFI Firmware Update 1.1. Has anyone else noticed a similar behavior? Any ideas or suggestions?
    Thanks in advance,
    Gonzalo

    Originally Posted by ketter
    HP DL380 G7
    OES 11 SP1 / SLES 11 SP2
    patched up to March 29, 2013
    HP LTO-5 Ultrium 3000 tape drive
    Arkeia backup software
    Everything was running fine. I updated the server firmware using the
    HP Proliant Service Pack on Apr 10, 2013 and haven't been able to get
    a good backup since. Arkeia support says problem with the hardware.
    But testing with the HP diagnostics says the hardware is fine. I
    checked with HP support and they agree that the hardware is fine but
    there are some communication issues. They recommended that I upgrade
    the driver. They sent me here:
    HP Smart Array P212 Controller*-* * RECOMMENDED * HP ProLiant Smart Array Controller (x86/AMD32) Driver for SUSE LINUX Enterprise Server 11 (x86) - HP Business Support Center
    I attempted to install that, but it failed due to dependencies. So
    before I go any further and risk messing something up. Does anyone
    have suggestions for this? If I do need to update the driver, is
    there another way I am supposed to do it vs using the driver from the
    HP website? Or how do I deal with the dependency issues...the only
    patching I have done with SLES so far is through the channel.
    Ken
    may i ask what kind of dependency issues you're facing? i've installed the SP2 (kernel 3.0.x) based package last weekend without any issues on a default kernel. are you sure that you've grabbed the rpm matching your kernel version?

  • Internet problems after firmware update 5800

    Hi there,
    I own a nokia 5800 since about 4 months ago. I am very happy with it, but when I updated the firmware three days ago, problems occured.
    At first everything seemed fine untill I wanted to look something up on the internet. The device makes a connection and then when (I presume) it established one, it just shuts down the webbrowser again. Also when I try to go to the "Download!" section I get an "unrecoverable error. application shut down".
    I have set up the internet settings again to check if that was the problem but the problem wasn't solved.
    Any idea on what this might be?
    Thanks in advance 

    Try doing a factry reset on the handset.  Failing that, you could do a firmware reinstall.  A lot of people suggest a hard reset/wipe but I personally think that's seriously last resort if everything else doesn't work.
    Nokia N8 on O2-UK
    Firmware 022.014

  • N78 problems after firmware update

    I have recently updated my N78 (RM235) firmware to 13.052.231.6.
    Before the update the internal GPS worked very well, finding satellites quickly and holding a strong lock. After the update the GPS is very poor, taking a long time to find satellites and loosing signal very easily.
    Can anyone help with this problem or tell me how to re-install the previous firmware?

    Has everything else stayed the same and only the GPS antenna reception got worse?
    If that is the case you are right, but maybe the update made other improvements and for some reason one of them worsened the GPS antenna...just guessing...  
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • Nokia 5800 XM: Problems after firmware upgrade

    Hello all,
    I upgraded my firmware to V 50.0.005, cause that's what Ovi store told me to do in order to download ovi maps.
    However, now, when I open my internet browser it automatically opens full screen which is really not my preference. But when I click "options" it just shuts down.
    Also when I enter Ovi store now, at first it seems fine but after loading an app page it crashes saying no more than "Something went wrong".
    Thanks in advance for your help.

    Hello, I'm afraid I don't have an anser to this, but I too appear to have the same problem. After upgrading to v 50.0.005 I get the following problems relating to web browsing. 1. If I attempt to download anything I get the following error :- Script alert: A critical internal service has failed. after which I click on OK and the browser/application shuts down (and the connection closes). This happens when web browsing e.g. when attempting to download a BBC podcast or using the Ovi Store application to download something. Also it happens whether I'm using my provider's 3G network or a wireless network. 2. If in the browser I click on "options" the browser shuts down. I admit that in order to get Ovi Maps I have previously debranded my phone in order to get the necessary firmware updates, but I haven't had this problem with any of the previous ones. FWIW the Ovi Maps application appears to work well and manage to keep the internet connection up for a long period when online. Does anyone else have this problem? Can anyone suggest anything or will we simply have to hape that the next firmware update comes quickly and cures the problem? Thanks in advance.

  • Problems after Firmware update

    I have a big problem with my ipod nano, @ the firmware update it disconnects from pc and now it didn't work anymore because of a mistake in the firmware what can i do? please help me

    If you have symptons stated on this thread, try the steps there.
    http://discussions.apple.com/thread.jspa?threadID=544840&tstart=0

  • E3000 problems after firmware update

    It seems internet browsing doesn't work after the firmware update.  Everything else works , aim steam msn, bittorent but anything http related will not work.

    on both computers i have run some tests
    ping 127.0.0.1 -fine
    ping 192.168.2.1 - fine (gateway)
    ping 192.168.2.3 (another computer) fine
    ping 192.168.2.254 dsl modem (fine)
    ping www.comcast.net fail
    I have thought it could be the DSL modem but it works  just fine when i use my Belkin pre-n router and the Belkin never needs a power cycle.
    I can get HTTP functions when i reboot the router. 
    I have also set up a DYNDNS to see if a friend could ping me and connect to  a server for me thru my IP address and it was successful its just websites and this is happening on all the computers and playstations (theres 2)

  • BT infinty WiFi problems since firmware update jun...

    hi guys
    ive noticed a recent firmware update on my homehub 3
    since ive had this update the wifi has got to pot
    its slow and unstable on all my laptops and phones via wifi
    the cabled connection is fine, its just the wifi playing up
    has anyone else had this recently and if so , are they doing anything about it ?

    ok
    been on the phone to the helpline in india
    i will say the guy spoke very good engish and was very helpful
    basically you have to use a pin to press the reset button on the home hub
    since it restared it seems to be ok, but i should mention as this fault seems to be intermittent hes going to call me back in a couple of hours and check.
    ill let yas know

  • Sony SBH50 Multipoint problem after firmware update

    I recently updated the firmware on Sony SBH50 bluetooth headset and now, I cannot use Multipoint anymore.  I have to switch off and pair individual devices while Multipoint was working well before the firmware update.  Please advise what to do

    I just purchase it and I cannot connect to my Z3 in same time as my Z3 tablet compact.  it is last version of soft and on firmware

  • Nokia 6120c problem after FirmWare update

    Hallo!
    I've found a serious bug in new firmware v4.21 for my phone 6120 classic. Adapter AD-44, which has been working normally before phone update, doesn't respond when I took an incoming call - phone doesn't response for microphone signals and buttons; a caller listen sizzle only.
    The Russian T9 has bugs too.
    Message Edited by anychall on 19-May-2008 09:48 PM

    i upgrade the phone software it run and install on the cell its shutdown and start again, the first time message on screan is [local mode] and then it shutdown again
    when i press the power again, screen become white no logo shows on screen and it turn off again i use the 3 finger button solution Green, * and 3 then press power to reset it but it not work white screen comes up and shutdown again.
    please help me
    Nokia 6120 clasics
    RM-243

  • 5800 problem after firmware update

    hi!
    I updated my nokia 5800 yesterday to  the new firmware v50. But today the whole touchscreen does not work at all. Only the three physical buttons and the unlock button on the side works. I have tried to turn it of but it did not help. I took out the battery and the memory card but i have still the same problem. Does anyone of you know what is wrong?

    /t5/Nseries-and-S60-Smartphones/5800XM-hard-reset-after-upgrade/m-p/462564#M137151
    So.. might have to go for a Hard Reset.. but Take a Back-up before doing...
    --------------------------------------------------​--------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

Maybe you are looking for

  • DVD drive won't open

    On my HP pavilion loaded with vista, the DVD drive will not operate.  When I try to open the dvd drive in computer dialog box, with a data or software dvd in place, it ejects the disk and requests that I insert a disk.   I would like to determine whe

  • Colors not consistent with Snow Leopard 10.6 on an Eizo SX2761W monitor

    I am unable to get any color consistency with Snow Leopard 10.6 on my Eizo SX2761W display. Most of the actual "content" (i.e. images, videos, websites, etc.) is displayed very saturated and dark, much more saturated and dark than in 10.5.8. I presum

  • Oracle RAC 2 node architecture-- Node -2 always gets evicted

    Hi, I have Oracle RAC DB with simple 2 node architecture( Host RHEL5.5 X 86_64) . The problem we are facing is, whenever there is network failure on either of nodes, always node-2 gets evicted (rebooted). We do not see any abnormal errors on alert.lo

  • 30 GB worth of photos installed???

    So After cleaning out my MacBook Air it says that I have 30 GB worth of photos. I have ZERO on this computer... I also have no videos stored anywhere, or music. As for Apps, basic applications are installed, bare min from what the computer came with

  • Detect error message on the screen

    How do I detect error message on the windows 2000 screen? I need to detect any error message appearing on the screen Thank you, Jeff