NOKIA N85 NOT VISIBLE DURING SUNLIGHT

i have a nokia n85 smartphone. During sunlight, it is difficult to see anything. i put the light sensor to maximum but no result. can any one help me solve this?

sorry, but it's a common issue, nokia's n85 and n86 are performing poorly in direct sunlight, that's just the way oled goes. altough the technology was designed for better clarity and contrast, it lacks on readability under strong lightning. the best thing you can do is set your phone on either a really darkish theme, or on a really bright one, it might help. however, there is a version of the n85 shipped since june 2009, which seems to comport better on direct sunlight. is that the one you have? if not, you might consider it.
If, from time to time, I actually give a good advice, please click on the Kudos icon, I have cookies and free hats!

Similar Messages

Enhancement not visible during runtime

Dear experts,
I have a problem with getting enhancements up and running in runtime.
I Changed 2 enhancements in FM J_1B_NF_VALUE_DETERMINATION and activated them. Activation goes fine, but for some reason during runtime (in debug mode), I can not see the code of the enhancement at all. My changes are not triggered, I can not even see the code in debug-mode. The complete code-block is missing. It seems that the enhancements are not active and are just not embedded during runtime. Do I have to activate something else? I guess CMOD and SMOD are not relevant in this case but if they are please let me know.
Thanks in advance
William

if you are usng enhancement framework then there is no need of CMOD/SMOD.
where have you created your enhancement spots? and what type have you given there?
goto SE19 and see what actually is the status of the enhancement .. if active, keep breakpoint directly inside your enhancement coding,
when FM starts executing, you will find a circular swirl(just on the left side of the code ), that mean it will goto your enhancement. it wont direcly show in the deugger, you press F5 and then it will go inside your code.

Hard Drive not visible during install.

I recently tried to turn on my G4 and got just a white screen. So I assumed it was the hard drive. I installed a new Hard drive. Put in my Leopard disk and the drive is not visible. I went into Disk Utility to format it, if needed. It was not visible there either.
Out of suspicion, I plugged in the old HD into a different mac via USB and my data is there and visible.
What could the problem be? I went back and double checked all of the cables.

I know it's a pain to take out just to test, however, did you plug the new drive into the other system via USB to see if it's recognized also?
Usually in this situation, it's a cable problem. Either a cable is not seated completely, or in rarer cases, there's a problem with a cable itself. Since the old drive is visible to the other system, you may have another issue going on, like a logic board problem. I'd want to run the Apple hardware test. On the gray OS X system CDs that came with your system, find the one that says 'AHT Version x.x', insert it, reboot, and choose the extended test when prompted. Either of the TechTool programs can do similar testing.
By the way, your sig says you have Snow Leopard 10.6.3 installed, which is impossible on a Powerbook. Leopard 10.5.8 is the last operating system release available today for Powerbooks.

Nokia n85 not playing MP4 files

Hi,
I never used the video podcasts, well I just tried to use some nokia video podcasts and they were in MP4 format. To my surprise my phone says it can not play the format and so it just played it as the audio file. I was reading at GSMArena.com and looks like N85 does support MP4 files.
Can any one help me on this? How can I play MP4 files on my phone?
Thanks,
Harpreet
N85
Software ver: 30.019
RM-334

Well, podcasts are mainly encoded in AVC@640x360 or 480x320. N85 plays AVC only at 320x240 resolution or lower. It has nothing to do with the container, in this case .mp4.

Entered Numbers Not Visible During Entry

Have a oddity on my Mac: If I try to type in values for the sliders in the Develop module, they dissapear duing entry.
1. Click on an enterable area for a slider. The text highlights.
2. Type in a value. Value is still visible.
3. As soon as the slider moves to the entered value, the text dissapears. It looks like it changes to the normally displayed gray value.
4. Tab out or click outside the area and all goes back to normal.
Mac Pro Nahalem dual 2.93, 16gb RAM, 10.6.8, ATI 4870 512mb
Jim

i note the same problem on the exposure field entry. imac,lion.
it is distracting and correcting one's errors in this regard requires some effort.
vince

Missing Functionality:BP Properties not visible during Add

Have formatted search to determine a new
bp code based upon business properties, but the variable is not set.
Select $[OCRD.QryGroup1] always returns 'N' even if the the BP property
is set when in Add Mode. Tested with an existing bp record the variable
is set correctly.
Edited by: Robert Fernandez on Sep 9, 2008 7:56 PM

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

List of data targets is not visible during data upload

Hi all,
I am trying to load user defined transactional data into an info object, i will do all necessary customization steps such as creating application component,assiging data sources,creating info packages and then creating update rules in info cubes, moreover i wrote a routine which calculates sales reveune based on cost and quantity sold.
My problem is that when i created infopackage , it does not list any data targets, Plz any one can give tips in this regard.
thanks in advance
regards,
a.fahrudeen
Message was edited by:
FAHRUDEEN MUSTAFA

Hi Fahrudeen,
Am a little confused here... you say you want to load Transaction data and load it into the InfoObject?? what was that??
You can load the Transaction data only into your data targets such as InfoCube and DataStore Objects... If you are loading the data into your InfoObjects, then that would mean that you are loading the Master data for which obviously you won't have your data targets listed in your InfoPackage... Only in case of loading the transaction data would you have your Data Targets listed in your InfoPackage...
Regards
Manick

Insecurity of Keychain Access: "secure" notes visible during authentication

Sorry if this has been discussed before, but I'm not keen on wading through 137 pages of discussions.
I recently discovered Keychain Access' ability to create "secure notes," and thought this would be a wonderful way to keep my serial numbers, bank accounts, and other sensitive information secure.
However, I just tried to actually decrypt this information for the first time, and was rather shocked. When you attempt to open a secure note, and select the "show note" checkbox that prompts the "Deny / Allow Once / Always Allow" dialog box, the dialog box contains the "secure" information from the note!
In my example, which you can see here (http://www.justinreese.com/media/images/secure_bbedit.png), the entire text of the note is included in the dialog, previous to any password authentication. Of course, because I'm reusing the login keychain, I understand that it's already been decrypted upon logging in; however, I was under the impression that using Keychain Access to store secure notes and other passwords offered a secondary level of protection, and that even if someone were able to compromise my system while I was logged in, at least that sensitive data would remain secure (the way a dedication application such as Wallet or Yojimbo would do it).
So... is this a bug, an oversight, or simply my own poor planning in using the login keychain to store secure information?
Thanks to all.
17" Powerbook G4/1.5Ghz Mac OS X (10.4.6) Stock + 1GB of RAM
17" Powerbook G4/1.5Ghz Mac OS X (10.4.6) Stock except 1.5GB of RAM

My suspicion is that when you created the note, in the "name" field, you used "paste" intending to paste "BBEdit 8 Registration". However, if the clipboard at the time had contained multiple lines, the "Name:" field would then contain the entire contents (Owner Name, Email Address, etc), although it might not be immediately apparent since the main "Keychain Access" window would only display the first line. However, when asking for authentication, the full "Name" is displayed. This scenario is easy enough to replicate.
The odd thing is that even if the "Name:" is subsequently edited to remove the extra lines, the "authentication dialogue" seems to continue to ask for authentication using the "old" name... it's probably being cached somewhere but I haven't been able to track it down.
So in this case, I would call this "user error" for putting "secure" info in an "insecure" field in the first place, but there is definitely some sort of bug / oversight / slopiness in that the authentication dialogue doesn't update - so in effect it is asking you to authenticate for one thing, when in reality it is authenticating something that might have a completely different name. That sort of thing might open up "spoofing" opportunities, but for a user's personal keychain, I would suspect that anyone that can get close enough to do something with it would have opportunities to do far worse. Still, it can't be a good thing...

My text messsage is not visible during my program works

I have write a programm, to write a file format in an other.
The files are so big that the programm work very long. So I made a text message that show the program is still working.
In the beginning was working well. But now the text messages is no longer displayed.
I have no idea what the problem is.
some code:
int CVICALLBACK ReadCallback (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
int iConfiguration;
switch (event)
case EVENT_COMMIT:
SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 1);
GetCtrlVal (panelHandle, PANEL_Dataset_Conf, &iConfiguration);
Function_Worker(iConfiguration);
SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 0);
break;
case EVENT_LEFT_CLICK:
break;
return 0;
The function_worker does made nothing with the GUI but it works with a DLL. Is this a problem?
Do you have any ideas?
Solved!
Go to Solution.

Somewhat more elaborate I'd suggest to modify your code as follows:
case EVENT_COMMIT:
    SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 1);
    ProcessDrawEvents ();
    GetCtrlVal (panelHandle, PANEL_Dataset_Conf, &iConfiguration);
    Function_Worker(iConfiguration);
    SetCtrlAttribute (panelHandle, PANEL_TXTMSG_Load, ATTR_VISIBLE, 0);
    break;

Contact names not displaying during calls, but only in logs

Many names in the address book not showing up
Hence, when i get a call or make one, the name doesnt come up with the number
after the call, the number with the name is visible in call log as outgoing or incoming or missed
in the database details it shows my address book having 238 numbers (these are the numbers currently visible)
so how is it that the names are visible in the log and not in the address book and also not visible during a call
Please help
(a search for this topic hasnt got me the correct results)

Same thing happened with mine! Still haven't figured it out, but **bleep** it's annoying!

AED not visible in Cenvat Utilization.

Hi ! All,
At my Client site, in Excise scenario, in addition to BED,ECess,SE Cess, AED ,is also used.
Now friends, is this AED cenvatable, because this AED part is not visible during cenvat utilization.
Do I need to some configuration so that I will be able to view it.
Thanks,
Regards,
DGN

hope u talking about AED additional duty of excise and not ADC additipon duty of customs
If u talk of AED
then according to law AED can be motivated agains AED only
So you will have to have a sales document with AED amount , IF u have sales doc with AED then Input AED will also be seen in J2IUN
hoipe this helps

AD RMS 2012 Templates/Permissions [Option] is not visible at Outlook 2013 in Nokia Windows 8 Mobile Device

I have AD RMS 2012 Server, its working fine by applying restricted Templates/Permissions on OWA, Outlook & other MS Office Tools (Word Excel, PowerPoint). But the AD RMS Templates/Permissions [Option] is not visible at Outlook 2013 in Nokia Windows
8 Mobile Device.
Actually I would like to protect email with RMS templates (defined by me on AD RMS 2012 Server) but the [Permission] tab is not visible at Outlook 2013 in Nokia Windows 8 Mobile Device.
But I can do same with Android OS in Samsung Galaxy Mobile Device & I can see [Permission] tab as well to protect an email messages.
Any idea??
Regards,
M.Daud Soomro

Currently, you can't use WP 8 to protect docs/emails with ADRMS templates. YOu can however use transport rules on Exchange server side to configure automatic ADRMS protection.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

Keypad not working on Nokia N85

Hi
I have the nokia n85 and the 0 key and the volume keys don't appear to work.
I have to press the 0 key very hard to get it to work
Will i require the device to be repaired
If so will it be an economical repair
Thanks
David Fairlie

My Nokia N85 has the same problem, I have to press the 0 key hard before I can get a space or 0 to appear.
What is needed to fix the problem>? Did you get your phone fixed?

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

E-Recruiting - Internal Candidates not displayed in candidate search, job postings not visible for internal candidates in job search

Hi Friends,
We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
1) What needs to be done for internal candidates to visible during candidate search ?
2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
Kindly provide your inputs.
Regards,
ER.

Hi,
In SLG1, getting the below error messages for multiple times.
"Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY
The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96
Qualification 52000001 does not exist
The incorrect HR object has the key 01NA60000029 "
"The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
Also please state how to differentiate internal and external candidate search pages.
Regards,
ER.

NOKIA N85 NOT VISIBLE DURING SUNLIGHT

Similar Messages

Maybe you are looking for