NOKIA N85 - PROBLEMS WITH PHOTOS

Hello I have a nokia N85 and needed help, I think I have a problem?
The problem is, when shooting pictures is always trembled as I can solve the problem??
By the time the picture is clear but the person becomes blurred.
And also the pictures are too white? It's an example of a picture taken
Attachments:
16032010064.jpg ‏561 KB

Hi ragdes,
Kindly update your phone's firmware
/discussions/board/message?board.id=pcsuite&thread.id=33348

Similar Messages

  • Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3.  Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

    Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

    razzbust wrote:
    ...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
    Self explanatory.
    You could try creating an iPod version of the films.
    Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

  • Problems with Photos and Fonts and Explorer

    I am having problems with photos and fonts when my site is viewed on Explorer. The site is Ostyn-Newman.com The problems can both be seen on the start page -though they happen throughout the site. The photo is supposed to be only 30% opaque and it shows fine on Firefox or Safari, but Explorer viewers get the photo being used as wallpaper at 100% and this steps all over the text. Should I give up a using a photo as wallapaper?
    Also the font I am using for "Ostyn-Newman Objects for Fine Homes" shows well in Firefox and Safari, but looks really bad on Explorer products. Should I just change the font? I am currently using Snell Roundhand.

    See Roddy's posts in these topics:
    Re: VIEWING iWEB SITES ON A PC ?
    Re: iweb pages memory intensive
    Re: iweb site on my personal domain name locks up
    The message in each is pretty much the same but he does give some info of an application that can optimize the web pages to make them more readily readable by IE.
    OT

  • Nokia 6303c Problem with camera, says camera on st...

    nokia 6303c Problem with camera, says camera on standby solution, any body got any solutions
    many thanks in advance

    try to free up some of your phones memory delete unwanted files ,delete text ,images etc or move to memo card
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Final Cut Pro 6.0.3 Problem with Photo JPG Codec ?

    Hi everyone...
    I have been working with music videos for several years using FCP 5.x and photo-jpeg codec, everything works fine. As time going by now I have updated my FCP using 6.0.3 with hopes to get better features. But unfortunately FCP 6 has problem with photo-jpeg codec. The problem is when I load a photo-jpeg video, the gamma will changes every time the playback head is start or stop. And I can't using video transition (standard cross-dissolve) anymore because the video gamma also change at the in transition and out transition. It also appear in my video monitor and output file ! I have searching all day to find out what is exactly the problem, but never get the solution. Should i come back to FCP 5.x ? Is it a BUGS or what ? What happen with Apple, why they let this happened ?
    For information the video is in SD PAL & captured using Blackmagic Decklink card.
    Please help,...Thanks.

    Welcome to the discussions...
    I believe this has to do with using YUV or RGB as the rendering method. RT is always RGB, but try changing the setting for your timeline to whatever it is not now...
    post back,
    Patrick

  • Problem with Photo Booth backdrops

    In addition to the problem of the first page effects constantly cycling, I now discovered a serious problem when trying to use backdrops.  After I select the backdrop I want to use, it will appear in the main window, but it will not place my picture in the backdrop. In addition, it will merely flash the "please step out of the frame" message for a split second and then immediately say "backdrop detected." When I then snap the photo, all I get is the backdrop. I have deleted the .plist file, but that did not help. I had previously uninstalled and reinstalled the application, but the problem persists. Has anyone else experienced this problem, and, if so, have you found a solution?

    I thought this issue had died and passed into oblivion.  Either no one has an answer, or no one gives a ****,or both. Certainly not Apple. I seem to remember sending feedback to Apple long ago, but I never received a response. I just went to the feedback page and there isn't even a Photo Booth app. showing through which to submit feedback. Checking some of the other threads on this issue, it appears that this problem with Photo Booth has existed for quite some time, and there was a problem with placing iChat backdrops too. It seems that this app. is such a piece of crap that Apple will no longer support it. I can't understand why they continue to include it as part of the OS.
    For what it is worth: I was recently at the Apple store and out of curiosity tried the app. on a MacBook Air. It (the app.)  was so unstable that I didn't even bother to try to set a backdrop. I've lived without Photo Booth until now, so I guess I can continue to exist without it.
    By the way: I didn't insert the asterisks. I typed d a m n, and the system inserted the ****. Interesting.

  • Nokia n97 problem with adding last widget

    Hi all, 
    After updating my software to v 21.0.045 i found my phone is working better than before with one exception. I can't add the last widget on the main screen. It can only let me change wallpaper?!?
    I tried to reset using phone, using code, restarting a few times etc Nothing helped.
    I even sent a message to Nokia helpline explaining all what has happened and they send me a silly email back with simple ""use "add content" in order to add widget to your mainscreen ""
    Somebody help! If you know how to add the last widget please let me know. 
    Ps 1. I didn't have this problem with my old software
    Ps 2. I attached a photo to prove it
    Attachments:
    nokia.jpg ‏106 KB

    If you do it , do another soft reset , back up Contacts, Calendar and Notes ONLY (your settings can cause conflict between new and old software, which is why this is advisable) Dial *#7370# followed by 12345, then set up your phone again manually, a bit of work, but should get the phone working like new !
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Funney solution to my nokia n85 problem

    my problem with my nokia n85 is that it keeps restarting
    i emailed nokia and they emailed me back saying
    It seems that problem is not in your phone, but in yor SIM card. Change your SIM card
    lol
    my god how bad is that
    it couldnt be the sim card
    im thinking its the memory card because its not an offical memory card

    i doubt its card these are new and bound to have issues i have one myself software updates will be available soon to fix any issues also keep to nokia card for best performance
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Problem with photos on dvd output

    Not sure where the kink is in my process, exactly, but maybe someone will have run into this before...
    i'm working with hi-res photos in my FCP sequences mixed with HDV video. I've been using the motion tab to resize and everything looks fine in final cut. When i use compressor to output the m2v file using the standard dvd presets, some of the stills have problems on the resulting file. not all of them look bad and it doesn't seem to be discriminating based on resolution of the original image file. I'm sure there's a good explanation, but the photos that get messed up seem to be random. some look great.
    In the .m2v file played directly off of QT, they sort of just look darker, like perhaps they are interlaced strangely or something and the even or odd rows are black. but when i use that file to burn a dvd in dvd studio pro, the resulting image looks crazy messed up. Anyone know how to wrangle this one? Thanks

    In case someone else runs into this problem, i did some extensive chatting with a final cut guru guy and all we could figure out is that i'm experiencing some sort of bug. that it shouldn't have been doing what it was doing. It started happening after my boss upgraded all of the studio software and quicktime to the latest versions. upon closer inspection, what was happening is that some of my photos were missing fields when exported as a qt, some weird byproduct of interlacing. we tried the settings all sorts of different ways and the problem did, indeed, go away when i changed the sequence to progressive, but i didn't want to sacrifice resolution of the rest of the footage just because of the problem with the few photos that were janky, so i found two workarounds that fixed the problem...
    1) using the de-interlace effect on just the photos that were giving me problems. it lowered the resolution, but not enough to make a difference and it looked good.
    2) using the motion blur effect. This filled in the missing fields and i did it at such an unnoticeable setting that it might have even looked better than the pictures i de-interlaced.
    If this jogs someone's brain as to what the actual problem was in the first place and you think it's not just a bug in the system, then i'd be interested to hear how to avoid the problem in the future.

  • Problem with photos' colors

    Hi,
    I have a problem with colors of photos which I'm using in a. InDesign document.
    I've created a 20 page catalog, with first and last pages for the front and back of the cover. I placed one photo on the first page and second on the last page. When I opened them earlier on in Photoshop they were matching perfectly, so I figured that it will be the same in InDesign. When I placed them in Indesign it turned out that the photo on the first page has a different color saturation (lower) than the one on the last page. It looks as if the first page was converted to CMYK and the last page was still in RGB mode (the photos were initially in RGB).
    I decided to change the color preferences of the photos in photoshop to CMYK and saved thm again for InDesign, but it didn't help (I also checked all of the doc and color preferences in InDesign and all looked fine). It seems that colors are different on the last page only. Is it possible that it has a different color preferences set up? I'm a new InDesign user and I would be gratefull for You help :-)

    It sounds like you have transparency of some sort (effects, drop shadow, tranparent image?) on the front and not on the back, and that the transparency blend space is set to CMYK instead of RGB while your image is RGB.
    Edit > Transparency Blend Space > Document RGB

  • Problem with Photos in Camera Roll after 4.0.1

    Hello,
    I have a 16GB iPhone 3G.
    I updated to iOS4.0 the day it came out, and other than the slowness that everyone else was reporting, I didn't have any other issues.
    When I updated to 4.0.1, everything seems a touch better performance wise, but I found a problem with my camera roll.
    First, when I opened the Photos App, there was no thumbnail for Camera Roll (all others were ok).
    I opened the camera roll, and the last 50 or so pics that I had taken, were all showing as one big Black blob (not individual black thumbnails, they were all joined)
    If I scrolled up to older pictures, the older ones were fine.
    I took a new picture to test it, and that one looks fine.
    So now I can see all my OLD pictures, and any NEW pictures I take, but those same 50 pictures were still showing as one big BLACK blob.
    I can still access the pictures if I touch them, and I can flip through them without any problems. I can also copy these photos from my phone to my PC, so the pictures themselves seem to be fine.
    And after copying them to my PC, what I noticed by examining the timestamps, was that the problematic pictures were all taken after I updated to iOS 4.0. It seems that all pictures from 3.1.3 or earlier are showing fine, and now all pictures taken with 4.0.1 are showing fine as well. So only pictures taken with 4.0 seem to be affected.
    Is there anything I can do to fix this?
    (Just for the record, my phone is not and has never been jailbroken.)

    There is a solution!!
    After installing iOS4.0.1 update on my 3G, I too had the black
    blob in my camera roll. As posted in an earlier thread, here's
    one way to resolve this problem. It worked for me!
    Just email the photos that don't appear in the camera roll to myself,
    delete the offending photos and then re-save them from the email.
    A bit of a pain but it's a way around it. Good luck!
    ErikV

  • Adobe Bridge CC -- ongoing problems with Photo Downloader (scrolling, crashing, etc)

    Hello Community,
    Thanks in advance for any suggestions to improve my Bridge CC experience! I have recurring problems, esp. when using the Photo Downloader (in other words, daily problems) -- scrolling either up or down to select photos is a nightmare, as the scrolling either jumps or stops without rhyme or reason, making the photo selection process tedious and maddening. Additionally, if I spend more than a few minutes selecting which photos to load to my computer (i.e., from iPhone), Bridge crashes.
    I have been using Bridge for about a decade, and never EVER had a single problem with it until CC. I have a 2013 MacBook Pro, all software updated, etc. No fancy bells or whistles, no peripherals, etc... Just trying to get my pictures from phone and tablet to the computer.
    Many thanks.

    Moving discussion to Bridge forum.

  • Problem with Photo Booth (NOT CRASHING)

    So I updated to 10.6.2 which THANKFULLY solved the Photo Booth crashing problem... However, some effects are producing an inverted color image
    Here is it what I mean:
    How it's supposed to look (captured by screen shot): http://img148.imagevenue.com/img.php?image=63601Screen_shot_2009-11-12_at_4.55_122576lo.jpg
    How it is being saved: http://img127.imagevenue.com/img.php?image=63605Photo_on_2009-11-12_at_16_122409lo.jpg
    Any help would be GREATLY appreciated

    I don't know the correct place to post this issue, but I do know that I have the same issue on my iMac with Snow Leopard. I actually have a problem with the effects page that has the cube, the clown, the cowboy, etc. All these effects save the photo wrong. The colors are off and grainy.

  • Nokia 6210 Problems with using Edge (Internet Conn...

    I have a Nokia 6210 phone bought from an authorized Nokia Care Center in Delhi, India two weeks ago.  The software version on the phone is 3.08 dated 11-June 2008. It also mentions custom version as 03.08.c00.01
    I am an Airtel Prepaid customer in New Delhi, India and had been using Mobile Office service on my prepaid number for some time. It worked perfectly fine for my Nokia 6233. On my current Nokia 6210 the Internet connection works fine for the first time through the built in browser or though any other application (like Google Maps, Gmail etc) which required internet and displays the sign signifying that the edge connection is active.
    The problem is that once I close the application the standby sign for Edge network is displayed as follows and no matter what I am unable to use the internet connection on the phone again until I do the following
    Restart the phone (which definitely isn’t a good option)
    Wait for around 8-10 minutes after which the Edge on hold sign disappears and is replaced by which means that the edge is available
    I found this out accidentally, but if I press the keys *123# which I typically use for enquiring balance, the on hold sign goes away and is replaced by the Edge available sign. after which things work fine.
    Not sure where the problem is. I really doubt it’s got to do something with Airtel as the same number worked perfectly fine with my previous Nokia phone in the same area. In addition my wife’s phone (again an Airtel prepaid number) is working great in the same area. So either this has got to do something with the handset or the compatibility of the handset with the Airtel, New Delhi.
    I have tried various sets of setting from the following sources
    The wizard in built in the handset
    Getting the settings from the Nokia site
    Getttng the settings from Airtel Customer Care
    But with all of them I am facing the same set of problems.
    Wanted to check if anybody out you have ever faced a similar problem with this phone or one in a simlar series?

    I suggest that you don't make permanent coupling between devices. Looks like Nokia modem is more responsive when you need to manually accept every connection at the phone's end.

  • Message "problem with photo with the filename '(null).

    I get the following message "There is a problem with the photo with the filename '(Null).'  The full resolution version of this photo either cannot be located or is corrupt.  Please replace the photo or delete it from your book."  This message appears after place the order and it starts to submit the pages of the book.  I get as far as page 9 of 60.  I have open the pictures using photoshop and have renamed them and saved them as a tif format.  Any suggestions?

    annefromtallahassee wrote:
    I get the following message "There is a problem with the photo with the filename '(Null).'  The full resolution version of this photo either cannot be located or is corrupt.  Please replace the photo or delete it from your book."  This message appears after place the order and it starts to submit the pages of the book.  I get as far as page 9 of 60.  I have open the pictures using photoshop and have renamed them and saved them as a tif format.  Any suggestions?
    I believe that you have gone into the iPhoto library and made changes using photoshop - is that correct
    If so then you have trashed your iPhoto library and must put it back exactly as it was - loading a backup is the easiest (probably the only) way
    NEVER make any changes to the content or structure of the iPhoto library using the finder or any program that is not fully iPhoto aware
    LN

Maybe you are looking for

  • Need help in export/import

    Hello All, I need help in export/import of an  internal table (based on deep structure) to/from desktop either in excel or XML file. I have an int table which has to be sent to desktop either in xls or xml file and then import back to an internal tab

  • Unreliable JDBC Inserts & Updates

    I have a java web application (struts-based) on my machine that accesses a remote mysql instance. 50% of the time, when I execute an INSERT, I get a java.net.Connection error. More facts: [1] Servlet accepts parameters via html page to create dynamic

  • SAP CRM help

    Hi experts, i am unable to find help of one FM in CRM. The FM is:CRM_ISA_BASKET_CHANGEHEAD Becoz..there is no documentation available for this in CRM System.Let me know if anybody have any idea how to find..the purpose of this FM.. Regards

  • HTML-Code not identified

    Hello, I try to do the following example: APEX check boxes in reports regions In the DB there is a table x_files and in my interactive region I put the following Region Source: select htmldb_item.checkbx(1,rownum) " ",        x.id,        x.filename

  • Work Flow Location

    Hi, When I'm testing the 'work flow location' and I get the following error message: "The connection test to the database was successful, but workflow is not detected - Please use workflow schema. " Which would be my workflow schema? I tried to enter