Nokia N9 changed to permanant landscape?

I have my Nokia N9 for around 8 months and it's worked fine; but the other all my apps including the web, messaging, gallery and calender went to landscape and won't return to portrait.I've tryed a hard reset, leaving it off for 5 hours, everything. Nothing seems to fix it. Please help?

have you tried reinstall the firmware with Nokiasuite or Softwareupdater?
If that doesn't help maybe the orientation sensor is broken.
Nokia N9 Black

Similar Messages

  • My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?

    My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?
    Another thing is that on Skype, whenever i clicked to sharescreen it only show a complete black out window. nothing else.
    Tried restore OSX mountain lion, doesn't work. what should i do?

    kaeandcolesmon,
    If you open the recovery drive (partition) it should only have a single folder (Recovery).
    To make sure that your not saving restore points to that drive.
    See:
    Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • RESOURCE_CONSUMER_GROUP - How to change it permanently ?

    Hi All,
    Oracle 10.2.0.3 on windows.
    I would like to change RESOURCE_CONSUMER_GROUP appeared in v$session view. I use such commands :
    EXECUTE dbms_resource_manager.clear_pending_area();
    EXECUTE dbms_resource_manager.create_pending_area();
    EXECUTE DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_USER (
    user => 'POOL_USER',
    consumer_group => 'POOLING_GROUP');
    EXECUTE dbms_resource_manager.submit_pending_area();
    But resource_consumer_group in v$session view becomes equal to POOLING_GROUP when i execute commands shown above after POOL_USER user is logged in. When i log out POOL_USER an log in again i have in v$session in RESOURCE_CONSUMER_GROUP column following value :
    SQL> select resource_consumer_group from v$session where username='POOL_USER';
    RESOURCE_CONSUMER_GROUP
    OTHER_GROUPS
    OTHER_GROUPS
    OTHER_GROUPS
    OTHER_GROUPS
    OTHER_GROUPS
    HOW TO CHANGE IT PERMANENTLY ?
    Many thanks for any help.
    Best Regards Arkadiusz Masny

    Hi Arkadiusz,
    You need to set the users initial consumer group. Use the following command:
    exec dbms_resource_manager.set_initial_consumer_group(user => 'POOL_USER',c onsumer_group => 'POOLING_GROUP');
    Cheers,
    Andy Barry
    http://www.shutdownabort.com

  • Change Orientation to Landscape

    How to change orientation to Landscape.

    c.pfaffenbichler wrote:
    if (app.documents.length > 0) {
    var myDocument = app.activeDocument;
    if (myDocument.width < myDocument.height) {
      myDocument.rotateCanvas(90)
    else {
    For the above code to work you would need to insure Photoshop units were set to something other than percent.  For when Photoshop Units are set to percent the statement "if (myDocument.width < myDocument.height) " would never rotate the canvas it would alway be "if (100% < 100%)" always equal been burned by that...

  • Changing Solution manager landscape and having a Virtual production system

    We have a 2 line landscape like this
    Line1: DEV1 - QAS1 - PROD1
    Line2: DEV2 - QAS2 - VirtualPROD.  
    During our golive pahse the QAS1 in Line1 will be replaced by the QAS2 in Line2 and Lin 2 will be on hold for a while.
    My questions,
    1) does any one have any experience in topic?, on how to change the system landscape without closing any tasklist/maintenance cycle or project.
    2) We have some problems with logging on to QAS system from the change request when having a virtual production system, it works fine from the tasklist.
    Unfortunalty we can't see anything in the log.
    3)When having multiple QAS systems in one Line , how can the import the change to the second QAS system be handled when using urgent correction since only one QAS is in the task list the one which feeds the production system. (Urgent correction always uses the shortest path to production)
    Comments, references and all else is valuable.
    br
    patrik

    Question #2
    Apperently does the system check for a connection to the production system and since it's virtual there is no rfc , so would it be possible to create an rfc to a virtual system?

  • Nokia 2330 disable loudspeaker permanently

    Is there a setting to permanently disable the loudspeaker forever on the Nokia 2330 Classic?
    I will never use this feature, but keep activating it all of the time when I answer the phone in a hurry. Very embarrassing esp. on public transport or at work.
    thanks!

    That can't be done you just need to pay attention to what you are doing and stay away from the loud speaker bottun
    Show your appreciation. Hit that kudos button real hard

  • Nokia C7 - Changing Contact types???

    When you add a new contact it automatically shows it as a mobile number.  Is there a way to change this to call it "Home" as some of my contacts have a home number and mobile number but at the moment my C7 will only call them both mobiles and there seems to be no option to change this.
    I would be very grateful for any help with this.

    Hello again !
    I figured out what's the problem There is nothing wrong in your C7 at all ! The thing is : your nokia is saving contacts in your SIM card , which restricts all details what so ever ! In order to be able to save other details , you will have to save your contacts in your phone memory ! More space , more details , almost a unlimited number of contacts unlike in SIM card !
    I advice you to save all your contacts in your phone memory and delete all your contacts from your SIM , keep it empty ( if you want ) , and occasionly backup your contacts in order to be on the safe side !
    To do that :
    1/ We want to make sure you are seeing contacts in the SIM card only :
    * Open the contacts list .
    * Go to "Options" --> "Settings" .
    * Select "Contacts to display" and make sure ONLY "Sim memory" is checked, then press OK and then BACK .
    2/ We want to copy all contacts from the SIM card to the memory card :
    * Go to "Options" --> "Mark / Unmakr" --> "Mark all" .
    * Go to "Options" --> "Copy" , and then select "Phone memory" as it appears .
    3/ Now that the contacts have been saved in the phone memory , no need to keep them in the SIM card , so let's delete them from the SIM card [ /!\ SKIP STEP 3 IF YOU DONT WANT TO DELETE THE CONTACTS FROM THE SIM CARD , however I advice you to do so ] :
    * Go to "Options" --> "Mark / Unmakr" --> "Mark all" .
    * Go to "Options" --> "Delete" , and then select YES .
    4/ Now we must select the phone memory as default for contacts :
    * Go to "Options" --> "Settings" .
    * Select "Contacts to display" and make sure ONLY "Phone memory" is checked, then press OK and then BACK . [ Usually after this step , the phone will automatically do the following step , but here it is just to make sure : ]
    * Select "Default saving memory" and make sure ONLY "Phone memory" is checked, then press OK and then BACK .
    And that's it you can from now on , save in one contact more than one number ( unlike in SIM ) , you can add as much detail as you like ( unline in SIM ) , you can add a picture to each contact ( unlike in SIM ) , and you have almost a unlimited number of contacts to save ( unlike in SIM ) !
    If you have previously saved two numbers for one contacts seperatly ( which would be the case because you have been saving contacts in SIM card ) , you can merge them under one contact by going to "Options" --> "Merge contacts" and selecting what numbers you wanna merge under one contact only .
    Please keep me uptodate about this issue and if you solved it or not
    Please if there is anything at all you did not understand , let me know
    Have a nice day !

  • Change name system landscape in System Landscape overview

    Hello colleagues,
    How to change the name productivo in system landscape overview?
    In the properties object i cant modify,
    Thanks

    right click to the object select open --> properties and change the name... (make sure you click on modify properties)

  • Changing view permanently for all playlists

    Howdy!
    I'm going to ask this question again:
    How do I
    1. change the order of columns and the selection of columns in the playlist view;
    2. make the changes permanent
    3. have the changes include column resizing; and,
    4. make the changes effective for all playlists but only do it once?
    I don't need to see some columns and want to see others, and I want to see the same columns each time I open a playlist -- any playlist -- and I don't want to be continually fiddling with the column headers and sizes.
    Surely I can do that. I mean, this is an Apple product, right?

    Hello,
    AFAIK, 4. cannot be done, but the first three should happen automatically.
    Whatever you do to a playlist is supposed to stay that way.
    To reorder columns, just drag and drop, to select which columns you see, right-click the column bar and select.
    Hope this helps.

  • Why does my iPhone4S not change orientation to landscape when turned in messaging but does turn in other functions?

    My iPhone 4S doesn't want to change orientation from portrait to landscape when turned - while in messaging.
    It turns fine in other functions...??

    What are these other apps? Because for some applications, landscape view is not possible, like calender.

  • Yahoo Default location in Safari: how to change it permanently?

    In Safari I have added (but don't recall how) to the toolbar an icon (with a "cloud") which takes me to the Yahoo! weather page:
    http://weather.yahoo.com/france/ile-de-france/paris-615702/?unit=c
    Once there I can enter another location (e.g. my hometown) and also specify this to be the "default location". But this default location apparently is not being stored, since when clicking on the cloud icon
    I still get back to the original "Paris" weather.
    Any idea how I could make my hometown permanent?
    Cheers
    Veit

    Are there perhaps settings in Safari that I need to change, i.e that prevent the Yahoo page from accepting the changes to the default location which I made there?
    Unfortunately, the settings are controlled by Yahoo, not your browser.
    Perhaps I need to address this question to the developer of the "Cloudy" extension of Safari.
    I wasn't aware this was a Safari Extension. Definitely try contacting the developer. That information should be in Safari / Preferences - Extensions.
    I realize that I was not precise in my question.
    Don't worry about that. Sometimes it takes going back and forth on a thread to figure it out.
    Thank you for the star.

  • Nokia 225 changing shortcut buttons

    Hi all,
       I've recently bought this S30+ based Nokia 225 phone.
       I am wondering is it possible to change the left and right buttons shortcuts (the right one is set to Camera by default) ?
       I've been searching for an answer to this but with no luck so far.
       I think that there is also other people interested to this.
    Thanks in advance !

    it cant be changed its set on phone,however you can define your route 66 to your active stanby or shortcuts
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Change Schema Permanent

    Hi!
    Is there any way to make a user change his schema permanent ?
    The scenario is:
    one user has his schema shared: U1_SCHEMA
    any others users have to gain access to this schema.
    I can do that using: ALTER SESSION SET CURRENT_SCHEMA = U1_SCHEMA;
    but I want to do this in transparent mode for the users always they login the system.
    Thanks in advance.
    AJ

    Opps...
    There is a problem, when you login this way the user has become another user, then when I take a look into: v$lock,dba_objects,v$session looking for a user that is locking a table the username is always the same, for all the users...
    Using "ALTER SESSION..." the username remain, and when I look in v$session, v$lock... I can get the real name who is locking a table.
    Our system has, several times, to shows the name of the user who is locking same tables.
    AJ

  • Nokia e63 Changing Keyboard Layout.

    I bought Nokia e63 but it came with a "azerty" keyboard. Is there anyway to change its firmware to QWERTY?

    my nokia e63 not like other e63's keyboard symbol.it's (q-! w-" e-+ and number key is like other i-? o- blank p-blank a-% s-' d-blank k-- l-? Zxc-blank after m here 2 key with other language. )my keypad also have another language with english.but after my firmware update my phone's keyboard symbol layout is changed.this lay out is not like other common e63.this layout is (q-! W-" e-- nuber layout is ok i-+ o-= p- blank a s d-blank k-? L-؟‎ z x c-blank next 1 botton after M is ' and no next 2 botton after : after space botton is work ،،،، and before ctrl botton work ؛؛؛؛؛‎ this......)so hoe can i fix this problem???

  • Nokia 8600 - change language HELP!

    Hi Guys,
    Recently I picked up a 8600 .. nice phone
    xpt ... the language is set to chinese ... and I can't read chinese ... so therefore I can't read the settings to change to english ... doh!
    Can anyone give me a step by step rundown of how to do this
    something like ... push button 3 time, go down 2 option, click right button etc etc
    thanks
    G

    The quickest, easiest way to get it back to english is to call in at a nokia care point.
    They will be able to do it in minutes if it's a genuine nokia.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

Maybe you are looking for