Nokia N900 auto off after 15 minutes

Nokia N900 auto off after 15 minutes. I am also reflash my mobile but problem is not solve please help me

More information..
Does it happen when it is plugged into a charger?
What is the battery level?
Are you using the battery that came with the phone?
Are you using a different battery?
Have you "over clocked"?
Does it power off when you are actively using the phone?
Does it power off only when the phone is idle and untouched?
What happens if you run this command in the terminal application?
  cat    /proc/bootreason

Similar Messages

  • Brand new Nokia N900 ceases just after half a day ...

    I recieved the new Nokia N900 as an upgrade. It crashed few time opening emails, however restarted automatically. Later on it crashed on ovi map (pre installed). I tried rebooting after taking the taking the battery out and putting it back in - no joy! I tried startgin without the sim card -still the same problem - it starts with the Nokia banner and then 5 flashing dots... that's it.
    I have used Nokia for over 10 years, I never experienced this from Nokia.
    I think N900 is still 'Work in Progress', am not sure if it is fully tested yet!!

    you need this thread!
    /discussions/board/message?board.id=maemo&thread.id=1799
    This is a known problem.. And I'll be brief here since there are lots of posts about it..
    A bug in the firmware causes some devices to reboot.. Your's is an unluck one.. There is a permanent fix in an up and coming firmware release (not the one released today.. but soon) but in the mean time we have a work around..
    you have two problems.. first getting your device booting..
    Each time your device randomly rebooted itself, it increased a counter.. when this counter reached its upper limit (17 reboots) the device will STOP booting.. as yours has.. To reset this limit you need to manually restart your phone.. use the power button to turn it off.. use the power button to turn it on and the counter goes back to zero.. 
    problem is, your device has already reached the limit so we need to trick it into going back to zero..
    The easiest option may not work for you.. but it is fairly simple..
    Take the battery out.. plug your phone into your computer.. put the battery back in.. allow the phone to boot..
    If that doesn't work, you'll need to use the longer process detailed in the link above.. Read the first post carefully and see the section:
    REPAIRING A DEVICE THAT NO LONGER BOOTS
    If your device won't boot and won't respond to flasher.. the battery could be flat.. you MUST charge the battery to get your device booting. To do this you'll need to find someone with a Nokia N900, 5800 or 5230 handset since they all use the same battery.. If you device won't boot, it won't charge.. 
    Ok, assuming these instructions have helped your device boot, you need to implement the patch to stop it rebooting.. 
    Open this URL in your phone
    http://chris.intrepid.cx/N900/fix
    Click and INSTALL the first link.. when you click the first link select open..you'll be taken to app manager and you must proceed with the install
    Go back to the browser and click and SAVE the second link.. Save the file in the documents folder of your device..
    now, open an Xterminal and type these two commands exactly.. remember they are case sensative:
    sudo gainroot
    sh MyDocs/.documents/fixpm.sh enable
    Reboot your device once more and you should hopefully have a happy N900!
    Any problems refer to the first link in this post... and post and questions in that thread..

  • Nokia 6151 Auto Off

    I did update my nokia6151 to the latest version and still auto off. Do anybody could provide or help me to solve this problem....
    Sincerely,
    Christopher Cheah

    17-Jul-200704:20 AM
    chrischeah wrote:
    Thanx for ur reply.
    I don't what had happen to my NK6151 phone coz when I'm listening to music or whatever even check sms and etc.. it will automatically turn off. The phone was updated to newer flash version and the prob still happen. I send it to repair but they all don't know what's the prob too.. Hopefully u could help me to solve the prob.. Thanx again..
    Sincerely,
    Christopher Cheah
    If is still happens after a firmware update and you haven't put any software back on the phone then this indicates a hardware fault and you should visit your local Nokia Service Centre for further assistance.
    Regards,
    Edward

  • Final Cut Pro Randomly Shutting off after Minutes

    Every time I open FCPX and begin editing it randomly shuts off after about 3-4 minutes. Regardless of what I am doing. I get no wheel or anything, it just shuts off clean. I am running the most recent update to Lion, FCPX 10.1 with 8GB of ram... this is really frustrating. Any thoughts?

    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.fcprescue.com and run it.
    http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

  • NOKIA N97 AUTO OFF ANG ON PROBLEM.

    MY FONE AUTO OFF ANG ON I HAVE DONE ALL KIND OF REST BUT STILL SO PLZ HELP ME.
    Solved!
    Go to Solution.

    First thing to try is a NEW SIM ..
    Also check without the Memory Card to isolate the issue, if its due to some corrupted data. If you find MC to be the problem, back-up data for it onto your PC and Format the card ..

  • Nokia 700 shut off after software update

    i have a Nokia 700, its a nice phone until i update its software then after updating and after using for a while it turns off automatically in short it wont start anymore... if i removed my sim card then its working again. i bring it to the nokia service center for reprogramming, it got worst the only thing that shows on the screen is the "Nokia" sign only with or without sim card.. how can this be? please help. thanks

    farby wrote:
    Didn't you check if its working fine at the Nokia Care ? ..or did the problem start afterwards ? 
    If nothing works from the link provided by adrianhughes , you need to again get it sorted thru' Nokia Care ..a
    Unfortunately there are NO INSTRUCTIONS in referred to resource for Symbian S^3 devices and later so pretty pointless referring OP to it.
    It sounds as if Care facility just accepted software prompt saying that flashing completed and never waited for device to reach country setup screen to check that operation was satisfactorily completed; I have seen this issue reported with several 700 where firmware was reflashed using ATF Nitro box for speed.
    Happy to have helped forum with a Support Ratio = 42.5

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

  • Nokia N 72 swiches off after 15 minutes

    Hi I use Nokia N72-5 hanset but now it is problem to me to operate with it. It became switched off after turning on. I removed memory card , and turn on but it switched off after 15-16 minutes. i reset its firmware bu dialing *#7370# but it didn't help. It became switched off after 15-16 minutes even withouting pressing any key on keypad.
    Please help
    Thank You,

    Are you sure your battery is still alright? How easy is it for you to turn it back on after it switches off. What other problems are you 3experiencing?
    Show your appreciation. Hit that kudos button real hard

  • Why doesn't my phone auto-lock after one minute?

    From the settings - it's checked to auto-lock after a minute, but for some reason - this does not always happen. I have tried turning off the phone and back on again - that did not work. How can this be resolved?

    probably. turn it off for sometime , restart the phone and check.

  • Why does my Sony Sound bar CT60BT turn off after 15 minutes?

    I turn the volume down during the evening and when I do, it automatically turns off after about 15 minutes.  Is there a way to change the settings so that it doesnt go into standby mode?

    Hi mdalton1284,
    Your Sound Bar has an Auto Standby Function.
    It will enter standby mode automatically when you do not operate the Sound Bar for about 15 minutes and the Sound Bar is not receiving an input signal but the sound bar is receiving signal from your PS4 going to the TV via HDMI connection.
    You may try resetting the Sound Bar.
    Follow the steps below.
    Use buttons on the remote control for the operation.
    Press BASS +, VOL - , and TREBLE + in that order within 3 seconds.
    Let us know if you're getting the same result after resetting the device.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Nokia N900 Rebooting after droping it...

    hello i have accidentally  dropped my nokia n900 on the floor from about 1 meter high. The battery didn't come out but the back cover was removed and the phone turned off...
    i then turned it on, the nokia logo appeared and then a black screen then the phone rebooted and it kept rebooting about 17 times then it gave me System Malfunction. System shutdown in 10 secs.
    I removed the battery and the sim card and i still got this problem...
    then when i came home i tried the R&D mode but it didnt fix the phone it kept rebooting even in the R&D mode...
    so what do you think is this a software problem or a hardware problem?
    i sent it to nokia today they told me to wait about 3 days to check if it is a software problem...
    please tell me what you think the problem is as i am worried !
    Thank you

    ooooh.. I'm way off this evening..
    It could be anything..
    Remember, the N900 has two flash units.. the first is small and very fast (256meg) which contains the core OS..
    The other is like an SD card and is 32gig and contains part of the OS
    Some users reported their devices failed and couldn't see the 32gig storage.. this causes all sorts of problems, failure to boot has been seen, failure to reflash is another.. general flakieness..
    If any of the components has failed, it might stop the device booting..
    The OS is remarkably intolerant of hardware failures.. but since there are practically no serviceable parts in the device it doesn't seem to matter..
    Point is, it is very unlikely to be a software fault.. I detest the test centers attitude..
    "It could be a software fault"
    then flash the device.. if it can't be flashed, its a hardware fault.. Infact no repair center would look at a modified, used OS.. A phone that has been messed with is very likely to have software problems.. what did the user do? delete some vital system file?!
    But still...
    if it can be flashed and STILL doesn't work, then the software is stock and it is essentially fresh-out-of-the-box meaning it has to be a hardware failure otherwise there is a flaw in the OS that could affect any brand new fresh device..
    it should be a 2 minute job to diagnose as "hardware"
    Point is, R&D mode does sometimes allow a faulty phone to boot and give you a chance to find out which hardware is playing up.. but if it still isn't booting I'd be hearing "my hardware is duff"

  • Yoga display turns off after 1 minute

    I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • My screen darkens after 1 minute and turns off after 3.  All of a sudden, now, after the screen shuts down, it comes right back on????

    My screen darkens after 1 minute and then turn off after 3 minutes (energy saver).  Now, all of a sudden, after it shuts down it comes right on???

    thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

  • Screen turns off after a few minutes and needs to be closed then opened

    hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
    thanks
    ross

    Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
    Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
    Cheers,
    Daniel

  • Canon 6D display language resets to chinese after auto off and indicates card full

    Just assembled my new 6D  with 24-105 mm and display comes in urecognizable language, after changing into english it reminds me that unused new memory card is full, so I reformat and seems ok... BUT when starting after auto off again the same unrecognizable language and full card !
    I have taken battery out and put in again, reset to default, changed card, and keeps doing the same.
    Any suggestions ?

    It could be the GPS in your camera IF you have been secretly kidnapped in your sleep, and placed somewhere in China, inside a cleverly detailed re-creation of your normal surroundings.  The persons responsible thought of everything BUT the GPS in your camera sensing your true location and resetting the default menu language to Mandarin.
    Investigate this, but very, very carefully.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

Maybe you are looking for

  • ATTN: GPO Users

    I'm getting ready (I hope) to upgrade my Garritan Personal Orchestra software to version 2.2.1. If there are any other GPO/Logic users reading this, and you have upgraded, have you noticed any performance glitches, plugin/sample loading errors (besid

  • Running F110 with message "Proposal has been released 07/22/10 06:42:33"

    Dear experts, When I made proposal through F110,  it shows me "Parameters have been entered", then after setting the related parameters, I tried to run Proposal with check on "Start immediately", then the message "Proposal has been released 07/22/10

  • Transfer asset within cocd.

    Hi all, My client needs to transfer some assets into other asset class. here i created asset class for the same. for transfer of these assets in ABUMN, what is the necessary data i should maintain? after transfering the asset the previous asset will

  • Create a file xml using dbms_xmldom

    i'm using dbms_xmldom to create a file xml. i use to create a node this line: IV_element:= dbms_xmldom.createElement(doc,'CATEGORIA'); dbms_xmldom.setAttribute(IV_element, 'natura','prova'); IV_node:=dbms_xmldom.appendChild(III_node,dbms_xmldom.makeN

  • Toshiba Laptop Connects to ANY Network Except Home

    Hi All, Really appreciate any help here. I'm very frusturated! My Tosiba AMD A10 laptop will connect flawlessly to work/school/public networks all the time. When I get home, it connects, but immediately drops my home network most of the time. Sometim