Nokia N93 Crashing and Poor Photos

Hi, I just got a new N93 on contract with O2 and my phone constantly crashes, reboots and freezes, I take it this is not normal for a highly praised phone?
The other thing is my nephew has a N80 and we decided to check out the picture quality for photos. We took pictures with the same settings on both phones but on the N93 the quality is so poor...
ie. Say you took a photo of an object in reasonable lighting and flash is used, while the picture taken from a N80 with flash set to auto or on, is perfect. But on the N93 with flash set to on or auto its totally disappointing the contrast is out, lighting is off etc...
Does this indicate that the phone I have is faulty?
Or does it just need a Firmware update?
If its the later can I preform the firmware update myself as I been waiting in line for this phone for about a month and I only had it now for 1 day and I am disappointed... Thanks for reading

Hi,
Thank you for all the postings and comments etc... I got my N93 online O2 UK don't have them yet for sale or contract... I got it from www.mobileshop.com I was going to get from from www.onestopphoneshop.co.uk (they are part of the Carphone Warehouse Group) but they called me back to say they won't be getting it.
The phone its nice, but the crashing, freezing and rebooting is awful. Also if you take pictures in poor lighting the quality is so bad it looks like it was taken from a digi cam with less than a 1meg pix lens.
I have also a Ericsson W900i it has a 2meg pix camera taking pics it poor lightings it brilliant same goes for the N80 which my nephew has, but on the N93 the flash does not seem to kick in or when it does the pictures taken it like blair witch project videos poor and grainy and all this hype about a "Carl Zeiss" lens its just does not live up to the hype at all. And yes I have tried taking pics with the flash turned on instead of auto no difference.
Looks like Nokia you have to do more testing and these N93 "Carl Zeiis" lens hype its sounds more like a Gimmick instead...

Similar Messages

Is it possible to reorder an iPhoto book 2 years later? My hard drive crashed and the photo book is no longer in my iPhoto but Apple printed it for me before the crash. Would Apple still be able to print another copy?

Is it possible to reorder an iPhoto book 2 years later? My hard drive crashed and the photo book is no longer in my iPhoto but Apple printed it for me before the crash. Would Apple still be able to print another copy?

For future books you might consider doing what I do: create a separate library for each book andcopy the photos for the book from your working library to the book library with iPhoto Library Manager.
When the book is completed and ordered burn the library package to a CD, DVD or external HD to archive it so it's available for editing and reordering at a later date if needed.

Nokia N93 Focus and Focus button

Has anyone else got problems with there Nokia focus button and zoom in and out swivel thing.
I bought the phone 11/10/06 three days later took it to Nokia shop to have it upgraded with the new firmware as it was crashing and taking jerky video.
All ok, All taking video ok, then things started to go wrong, the unit restarts on its own, I can not use the swivel zoom in and out button its too hard to move, I take the pictures at night and well u might as well not use the flash for all the good it does. The focus button I depress on photo mode will flash green for ages and will not focus at all. The video looks like it is stuck on high zoom and will not do anything.
£499 I paid for this phone and for a phone thats a lot of cash to pay for just that A PHONE!!!
Im not saying that it should be the bees n eee of phones, but why for a new phone is it failing and even let out on the market with faults??
The place where I got it from is not even answering the phone or emails I am sending to get it sorted, even the Nokia Shop where I took it to get it f/w uploaded told me to send it back to where I got it from in the 1st place next time.
So Nokia, if your listening, help me out here?
So far since I got this phone.
Bad software version so new phone could not use as it suggested.
Bad after sales service from your Nokia center.
And now a camera phone which has turned into a hmmm Phone...
Happy? not...
All I can say is I hope your N95 is better and tested before you send it out to the public.

Well here we are, I took my phone to the shop, they told me after a week it went to germany for the phone to be diceted(spelt right? hmm) anyway, I went on holiday to aus for three weeks without a phone, thanks nokia!! came back, and just my phone was ready, I got a friend to pick it up as while I was away my dad died. Family could not reach me as no telephone. I check it out and use it, v 10.0.025 12-07-06 RM-55 N93 (52.01) Bluetooth can not turn up the volume while in a call. Pics grainy Batt power will not even last a night, I got to sleep with a fully charged phone and wake and its dead. Strange how the nokia shop said nokia have sent me a new phone. Choices choices, Local paper will def hear abotu hwo **bleep** your company is with support and pushing out faulty phones and def will be talking to consumerwatch, you will be hearing from me later, just **bleep**. And yes im angry. Not happy at all with the responces, example, please accept out appoligies, and can you take it to your nerest nokia shop for an upgrade or repair. Jeesh, I have had this phone since october and I have only had it with me for three weeks out of that lot, you nokia have had it, shall I just give you £500 and not have a phone as thats what it feels like. Its supposed to work, I dont buy a car without wheels do I? I buy a phone which should work. All other readers dont waste your time with this phone or nokia as the support if poor and well the phone is not worth it.. Oh also for your updater software, if ver 11 or ver 20 odd is out, why does the software say there is no new software for my phone? Another waste of harddisk space on my computer.
EDIT: removed expletivesMessage Edited by damocles on 22-Dec-2006
09:30 AM

Nokia 6300, iSync, and Contact Photos-

Thanks to the following links, I was able to get my new Nokia 6300 to successfully sync with my Mac’s Address Book via iSync:
http://klauskjeldsen.dk/2007/06/08/free-nokia-6300-isync-plugin/
http://nokia6300.net/8/new-version-of-the-nokia-6300-isync-plugin
http://brent.kearneys.ca/technology/2007/how-to-sync-a-nokia-6300-on-osx/
http://kaspers.freeflux.net/blog/archive/2007/04/13/how-to-isync-a-nokia-6300.html
Unfortunately, two things didn’t sync up: Birthdays and Contact Photos. After politely asking people if there was any way to get these to work (especially photos, as it’s nice to see someone’s picture pop up on the phone for faster recognition before you unceremoniously reject them) I tried to tackle this one on my own. I was able to dig around in the plist files of the Nokia N93 and glean the few lines that make both of these details available to the Nokia 6300 plugin.
Before we begin however, I’ve noticed some problems that can occur with Photo syncing. PLEASE READ THIS THOROUGHLY before continuing: it’ll save some head-banging and frustration later.
Failing to follow the following guidelines will result in a completely failed sync. Should this happen, I simply deleted all of my contacts on the phone (phone memory, not SIM card), tried to determine the problem, and tried again.
Also, note that if you do end up deleting all of the contacts on your phone, you’ll also lose your 1-touch dialing and the entries in your caller groups (but not the groups themselves).
Here we go:
Do not use .GIF files — JPG only! (I didn’t test PNG)
You cannot drag-and-drop from a web-page directly onto a contact. Although this works for Address Book in that you’ll see the ‘image edit’ window pop-open, and you can save your contact, when it comes to iSync your entire sync will fail. If you want to use someone’s image (from Facebook, for example) simply drag the photo you want from the web-page onto your desktop, and then drag the photo from your desktop onto the Address Book entry’s ‘contact photo’ area. You’re then free to delete the image from your desktop.
You cannot sync with a ’smart group’ that you created within Address Book. This has more to do with iSync than the new plugin, but it’s a pain nonetheless. Physical groups only!
When a sync fails, you are not told what failed, or why it failed. iSync detailed logs are useless too, stating only:
5:28:24 PM Error [Nokia 6300] An unexpected error occured.
5:28:24 PM Error Device "Nokia 6300" synchronization failed
Fun! What I did was create a ‘temp’ group, set iSync to sync with that folder only for contacts, and then slowly add contacts into that temp group until a failure occurred so that I knew what the offending entry was.
The plugin that I’ve created is essentially just the one from the site listed above, but with some additional properties put into the PhoneContuit.plist and SyncEngine.plist files.
As with everyone else, I take no responsibility if this completely fcks up your phone or Address Book, but please do backup both your Address Book (File -> Back Up Address Book…) and your phone’s contacts (I typically just copy everything to SIM). I can say that this has worked fine for me for a day now, with a fair bit of testing. After I cleaned up my offending image-entries, it’s been great.
To install: Quit iSync, download the following zip file, and drag-and-drop the plugin into your system using the shortcut, and sync away.
Nokia 6300 iSync Plugin With Photos
Good luck, let me know how it goes in the comments!
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Hi! I can't download your Plugin for the Nokia 6300. Could you upload it again?
That would be very kind!
Thanks a lot!
T.

Nokia N93 Crashes/freezes at startup

as the title suggests my brand new literally just out of the box N93 crashed when in the glallery and now refuses to go further than the nokia logo when turned on. any help would be great cos i dont want to have to RMA it

27-Nov-2006
03:00 PM
rhys_phelps wrote:
Cant turn it back on, tried it with the battery taken out and put back in, with the sim card in or out, everything. tried the hard reset code. no luck.
Then you need to take your phone to a repair center
http://europe.nokia.com/A4144987

Is there any way to fix the flash and poor photo quality after iOS 7 upgrade?

Hi everybody,
Since upgrading to the new iOS 7 on my iPhone 5 ... I have experienced poor photo (grainy) and the flash works when it feels like it... Is there any way
possible to revert back at least on the camera settings or is there a fix that can be downloaded to solve this problem? I take and use my camera a lot on my iphone5 and for me to have this problem it has made me really regret ever upgrading and I am starting to lose my faith in Apple products. I have searched the entire web and it appears there are a ton of people experiencing this same problem.!!!!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

Crashing and poor performance during playback of a large project.

Hi,
I've been a regular user of iMovie for about 3 years and have edited several 50GB+ projects of DV quality footage without too many major issues with lag or 'dropped frames'. I currently have a 80GB project that resides on a 95% full 320GB Firewire 400 external drive that has been getting very slow to open and near impossible to work with.
Pair the bursting-at-the-seams external drive, with an overburdened 90% full internal drive - the poor performance wasn't to be unexpected. So I bought a 1TB Firewire 400 drive to free up some space on my Mac. My large iTunes library (150GB) was the main culprit and it was quickly moved onto the new drive.
The iMovie project was then moved onto my Mac's movie folder - I figured that the project needs some "room" to work (not that I really understand how Macs use memory) and that having roughly 80GB free with 1.5GB RAM (which is more than used to have) would make everything just that much smoother.
Wrong.
The project opened in roughly the same amount of time - but when I tried to play back the timeline, it plays like rubbish and then after 10-15 secs the Mac goes into 'sleep' mode. The screen goes off, the fans dies down and the 'heartbeat' light goes on. A click of the mouse 'wakes' the Mac only to find that if i try again, I get the same result.
I've probably got so many variables going on here that it's probably hard to suggest what the problem might be but all I could think of was repairing permissions (which I did and none needed it).
Stuck on this. Anyone have any advice?

I understand completely, having worked with a 100 GB project once. I found that getting a movie bloated up to that size was just more difficult with jerky playback.
I do have a couple of suggestions for you.
You may need more than that 80GB free space for this movie. Is there any reason you cannot move it to the 1TB drive? If you have only your iTunes on it, you should have about 800 GB free.
If you still need to have the project on your computer's drive, set your computer to never sleep.
How close to finishing editing are you with this movie? If you are nearly done except for adding audio clips, you can export (share) it as QuickTime Full Quality movie. The resultant quicktime version of your iMovie will be smaller because it will contain only the clips actually used in the movie, not all the saved whole clips that iMovie keeps as its nondestructive editing feature. The quicktime movie will be one continuous clip, incorporating all your edits and added audio. It CAN be further edited, but you cannot change text of titles already there, or change transitions or remove already added audios.
I actually do this with nearly every iMovie. I create my movies by first importing videos, then adding still photos, then editing with titles, effects and transitions. I add audio last, and if it becomes too distorted in playback, I export the movie and then continue adding audio clips.
My 100+ GB movie slimmed down to only 8 GB with this method. (The large size was due to having so many clips. The movie was from VHS footage of my son's little league all-star game, and the video had so many skipped segments that I had to split it into thousands of clips to remove the dropped ones. Very old VHS tape!).
I haven't upgraded to QT 7.5.5, but I heard that the jerky playback issue is mostly resolved with this new upgrade. I am in mid-project with about 5 iMovies, so I will probably plod along with my work-around method, not wanting to upgrade in the middle of any of them.
Hope this is helpful to you.

Skype crashing and poor performance

Hello!
I have a Lumia625 with WP8.1. My problem is that Skype has a really poor performance on my phone. It crashes 6 times out of 10 on startup, and even if I manage to start it, the whole app is slow and laggy. Sometimes I can't even write a message it's so laggy. Video call is absolutely out of the question. It crashes my whole phone. I have no similar problems with other instant messaging apps nor with high-end games. There is something obviously using way more resource in the Skype app than it's supposed to. It's a simple chat program, why would it need so much resource?
The problem seems to be originating from the lower (512 mb) RAM size of my phone model, because I experienced the same effect with poorly written apps, that don't keep in mind that there are 512 RAM devices, not only 1GB+ ones, and use too much resource.
Please don't try to suggest to restart/reset the phone, and reinstall the app. Those are already behind me, and they did NOT help the problem. I'm not searching for temporary workarounds.
Please find a solution for this problem, because it is super annoying, and I can't use Skype, which will eventually result in me leaving Skype.
Solved!
Go to Solution.

When it crashes on startup it goes like:
I tap the skype tile
The black screen with the "Loading....." appears (default WP loading screen). Usually this takes longer than it would normally take on any other app.
For a blink of an eye the Skype gui appears, but it instantly crashes.
If I can successfully start up the app, it just keeps lagging. I sart to write a message to a contact, and sometimes even the letters don't appear as I touch them, but they appear much later altogether. If I tap the send message button the whole gui freezes (seems like it freezes till the contact gets my message). Sometimes the lag get stronger, and sometimes it almost vanishes, but if I keep making inputs when the lag is strong, sometimes it crashes the whole app.
When I first installed the app, everything was fine. But after a while this behavior appeared. I reinstalled the app, and it solved the problem temporarily, but after some time the problem re-appeared. I don't know if it's relevant, but there was a time when I couldn't make myself appear online all the time (when the app was not started). In that time I didn't experience the lags and crashes. Anyways, what I'm sure about is that the lags get worse with time. Idk if it's because of use of the app (caching?), or the updates the phone makes to itself (conflict?).
I will try to reinstall Skype. Probably it will fix it for now. I hope the problem won't appear again.

Upgraded to IPhoto 6: Crashes and missing photos

Recently upgraded to IPhoto 6. I've had all previous incarnations of Iphoto and never had any issues up until now. After install, I was prompted to "rebuild my thumbnail cache", which I did. It crashed halfway through and I sent a note to Apple. Tried it again. Crashed again. Noticed that IPhoto had created 3 new rolls comprised of photos that were 3 to 4 years old, probably from the first IPhoto. In doing that, it lost my last three rolls, possibly more but I haven't noticed specifically. I had backed up my library using Retrospect to an external hard drive so I have all of the photos safely. How should I correct/fix this? Also, how can I get rid of all of my thumbnails. I absolutely hate them, they are useless clutter. Thanks in Advance.

Ed44:
Did you figure out how to get iPLM up and running and rebuild the library?
Can you describe how you went about copying the other library folder over, where you placed it and how you went about importing?
You should just try placing that library folder in your Pictures folder, launch iPhoto with the Option key depressed and, when asked, locate and select that newly copied library folder.
HOWEVER, after copying it to your Pictures folder and before launching iPhoto download and run BatChmod on the iPhoto Library folder with the settings shown here, substituting your account name for mine. You can either type in the path to the folder or just drag the folder into that field.
See if that will help.

Lightroom Crashed and ALL photos GONE!

Lightroom 4 crashed when I was importing photos from an external drive - I do not remember the error message. When I restrted the program a message said the catalogue could not be found and I had the option to select the Default Catalogue. I did so and now all of my photos are gone and when I use Finder (Mac OS 10.8.5) to access Photos/Lightroom, the file is empty.
How can I recover my photos?

Have a read of the info from the link below. It may help.
http://books.google.tt/books?id=xvQyt1nluHsC&pg=PT184&lpg=PT184&dq=lightroom+catalog+lock+ file&source=bl&ots=YOBXdybkWG&sig=MU_dIfkxr1tudTprQ4LM3QNjxL0&hl=en&sa=X&ei=ipPOUqj7C8mjsQ Sa94CoDA&redir_esc=y#v=onepage&q=lightroom%20catalog%20lock%20file&f=false

Iphoto crash and uploaded photos lost

Hi I am flabbergasted!
I tranfered 300+ photos to iphoto, created a folder for them, and was just doing some editing when the program froze, closed and when I reoped the program the new directory was there, however there were no photographs in the folder. During the process up transfer the oroginals were deleted (as per the cue), so now I have nothing - all my christmas photos gone. Please sombody tell me how I can get them back!
Thanks
Tom

first off we can only communicate with words so proper usage is critical
In iPhoto folders can not hold photos - folders hold albums or other folders
So what are you calling folders? Events? Albums?
as to the importing - a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and the reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
Depending on exactly what you have done and what you are seeing you may have to use data recovery software to recover the photos on your memory card - downoad media recover and with the free trial see what you can recover - do not use your card until this is resolved - if necessary you can purchase media recover and recover what it sees
LN

Nokia N93 software update

Hey,
I have Nokia N93 phone and I'm trying to update its software, I did it actually before but this time it was different, NSU downloaded latest firmware from internet the in install phase; the phone disconnected from PC for unknown reason; so my phone has no software now and the pc can't detect it anymore.
What should I do??

First remove the battery for 5 minutes, reconnect the battery, connect it to your pc and run the updater again. Leave it for a few minutes and it should go into recovery mode.
If not disconnect it and try a hard reset.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. Release when the phone shows the nokia logo or shows other signs of life like the language selection screen.
If that fails to fix it try the advice offered in this post by drummer27:
/discussions/board/message?board.id=swupdate&message.id=14152#M14152
If that still fails then the last option is to take the phone to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Nokia N93 and copying music from a Mac with Nokia ...

I recently just got a Nokia N93. I am able to use iSync with it thanks to a plug-in.
I have had some success using syncTunes v1.6 to copy music files over to the memory card when the phone is connected with the USB cable. But the playlists do not work.
I did download and install the Nokia Music Manager for the N70 (I believe).
Will the Music Manager work with an N93? I am actually seeing the music on the phone but the app says iTunes is not available.
I am using Mac Os 10.4.8, iTunes 7.01. I have installed v1.02 of the Nokia Music Manager.
Will there be a release for the N93 or should the current version work?

I have been happily using Sync Tunes the last few months.
Recently, I started playing around with making smart playlists in iTunes. What I wanted to do was create a random play list of tracks to copy on a daily basis to my phone.
I ran into all kind of fun with audio file formats. It turns out the many of my audio files are encoded as M4A and MP4. These will not play on the Nokia N93.
Fortunately, I found a web-site (http://smartplaylists.com/) explaining how to filter out these kind of audio tracks in the smart play list. The built in help in iTunes is very poor in this regard.
The following link is to explanation on how to select file types in smart play lists.
http://smartplaylists.com/comments.php?id=729_0_1_0_C
Now I can create a playlist that is 950 M of audio tracks and I then use sync tunes to copy it across.

Nokia Ovi Suite and Nokia 5800 crashing after fw u...

When I start my Nokia Ovi Suite (V. 2.2.0.245) it works as usual, I can brows around my content without any problems. As soon as I connect my Nokia 5800 XM (RM-356 V. 51.0.006) it crashes. Worked just fine before I upgraded to the latest version on the phone.
===============================================================
I get the following error reported from Windows XP:
===============================================================
AppName: nokiaovisuite.exe
AppVer: 2.2.0.245
ModName: msvcr90.dll
ModVer: 9.0.30729.4148
Offset: 0003b000
01/09/2010 16:43:48 (OviSuite) - ERROR   - DAL_Plugin_PCCS, Thread 12, Line 168,    .\Application\CDalPCCSDevice.cpp, CDalPCCSDevice::getHandle(): DAL failure detected: (0) converted from PCCS error [0x0: Ok] / DA_OpenCA / @ CDalPCCSDevice::getHandle (.\Application\CDalPCCSDevice.cpp:168)
01/09/2010 16:43:48 (OviSuite) - ERROR   - DAL_Plugin_PCCS, Thread 12, Line 168,    .\Application\CDalPCCSDevice.cpp, CDalPCCSDevice::getHandle(): DAL failure detected: (102) converted from PCCS error [0x80100023: Device do not support operation] / DA_OpenCA / @ CDalPCCSDevice::getHandle (.\Application\CDalPCCSDevice.cpp:168)
01/09/2010 16:43:48 (OviSuite) - ERROR   - CommonUtilities, Thread GUI, Line 393,   .\Application\platform\win\WindowsNetworkUtils.cpp, CWindowsNetworkUtils:etNAMProxySettings(): Could not found proxy server for Url!
01/09/2010 16:43:47 (OviSuite) - INFO    - AO Action: Id = 21 Oper = Start Result = 0 Classname = CAOCheckInstallationsOperation Resource = Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 15
01/09/2010 16:43:47 (OviSuite) - INFO    - AO Action: Id = 20 Oper = Finish Result = 0 Classname = ProxyResolverOperation Resource = 8000000000010020 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 14
01/09/2010 16:43:47 (OviSuite) - INFO    - AO Action: Id = 19 Oper = Finish Result = 0 Classname = ProxyResolverOperation Resource = 8000000000010019 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 13
01/09/2010 16:43:46 (OviSuite) - INFO    - AO Action: Id = 18 Oper = Assign Result = 0 Classname = DeviceMemoryStatusReader Resource = 355225038859660 Content = {2468e4ca-72d2-6000-9000-e48a86b1f700} Queue = 8
01/09/2010 16:43:46 (OviSuite) - INFO    - AO Action: Id = 17 Oper = Start Result = 0 Classname = CAOGetContentCapability Resource = 355225038859660 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 8
01/09/2010 16:43:45 (OviSuite) - INFO    - AO Action: Id = 16 Oper = Finish Result = 0 Classname = ProxyResolverOperation Resource = 8000000000010016 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 12
01/09/2010 16:43:44 (OviSuite) - INFO    - AO Action: Id = 15 Oper = Finish Result = 0 Classname = ProxyResolverOperation Resource = 8000000000010015 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 11
01/09/2010 16:43:44 (OviSuite) - INFO    - AO Action: Id = 14 Oper = Finish Result = 0 Classname = ProxyResolverOperation Resource = 8000000000010014 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 10
01/09/2010 16:43:44 (OviSuite) - INFO    - AO Action: Id = 13 Oper = Finish Result = 0 Classname = ProxyResolverOperation Resource = 8000000000010013 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 9
01/09/2010 16:43:46 (OviSuite) - INFO    - AO Action: Id = 12 Oper = Finish Result = 0 Classname = DeviceInitializer Resource = 355225038859660 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 8
01/09/2010 16:43:40 (OviSuite) - INFO    - AO Action: Id = 11 Oper = Finish Result = 0 Classname = PlantImeiFile Resource = 355225038859660 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 8
01/09/2010 16:43:36 (OviSuite) - INFO    - AO Action: Id = 10 Oper = Finish Result = 0 Classname = CContactContentObjectsOperation Resource = 8000000000000001 Content = {41803f8d-ddf7-4bac-9fc4-e54d248305d5} Queue = 4
01/09/2010 16:43:32 (OviSuite) - INFO    - AO Action: Id = 9 Oper = Finish Result = 0 Classname = ProxyResolverOperation Resource = 8000000000010009 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 7
01/09/2010 16:43:32 (OviSuite) - INFO    - AO Action: Id = 8 Oper = Start Result = 0 Classname = CDalPccsDeviceObjects Resource = 355225038859660_persistent Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 6
01/09/2010 16:43:32 (OviSuite) - INFO    - AO Action: Id = 7 Oper = Finish Result = 0 Classname = ProxyResolverOperation Resource = 8000000000010007 Content = {2468e4ca-72d2-4248-8ce7-e48a86b1f783} Queue = 5
01/09/2010 16:43:36 (OviSuite) - INFO    - AO Action: Id = 6 Oper = Finish Result = 0 Classname = CContactContentObjectsOperation Resource = 8000000000000001 Content = {41803f8d-ddf7-4bac-9fc4-e54d248305d5} Queue = 4
01/09/2010 16:43:33 (OviSuite) - INFO    - AO Action: Id = 5 Oper = Finish Result = 0 Classname = CContactContentObjectsOperation Resource = 8000000000000001 Content = {41803f8d-ddf7-4bac-9fc4-e54d248305d5} Queue = 4
Nokia M Platform 2.6.195 (NLib 0.8.641)
Nokia M Data Store opened at location "C:\Documents and Settings\Petri\Local Settings\Temp\Nokia Remote Data Store\355225038859660-mtp\DataBase\MDataStore.db3"
Nokia M Platform 2.6.195 (NLib 0.8.641)
Nokia M Data Store opened at location "c:\docume~1\Petri\locals~1\applic~1\nokia\nokiad~1\Thumbnail\DataBase\MDataStore.db3"
Nokia M Platform 2.6.195 (NLib 0.8.641)
Nokia M Data Store opened at location "c:\docume~1\petri\locals~1\applic~1\nokia\nokiad~1\DataBase\MDataStore.db3"
Nokia M Data Store opened at location "C:\Documents and Settings\Petri\Local Settings\Application Data\Nokia\Nokia Data Store\Thumbnail\DataBase\MDataStore.db3"
Nokia M Data Store opened at location "C:\Documents and Settings\Petri\Local Settings\Application Data\Nokia\Nokia Data Store\DataBase\MDataStore.db3"
01/09/2010 16:43:39 (OviSuite) - INFO    - DalDataModel: deviceConnected 355225038859660
01/09/2010 16:43:39 (OviSuite) - INFO    - DalDataModel: oviDevicemediaAdded (USB)355225038859660
01/09/2010 16:43:39 (OviSuite) - INFO    - DalDataModel: oviDeviceConnected 355225038859660
01/09/2010 16:43:36 (OviSuite) - ERROR   - CommonWidgets, Thread GUI, Line 192,   .\Application\CommonHomeWidget\StackHomeAnimation.cpp, StackHomeAnimation::updateAnimation(): Pixmap count needs to be at least 1
01/09/2010 16:43:36 (OviSuite) - ERROR   - MapsPlugin, Thread GUI, Line 482,   .\Application\ItemsPane.cpp, CItemsPane::showItemsPaneNoData(): ShowItemsPaneNoData error 1013
01/09/2010 16:43:30 (OviSuite) - ERROR   - CommonWidgets, Thread GUI, Line 491,   .\Application\CommonNavigationPane2\CommonNavigationPane.cpp, CCommonNavigationPane::getSelectedIndexes(): Selection model is NULL!
01/09/2010 16:43:28 (OviSuite) - ERROR   - MessagesPlugin, Thread GUI, Line 834,   .\Application\ItemsView.cpp, CItemsView::getMessageModel(): m_pMsgFilter is NULL. Could not get message model.
01/09/2010 16:43:28 (OviSuite) - ERROR   - CommonUtilities, Thread   6, Line 393,   .\Application\platform\win\WindowsNetworkUtils.cpp, CWindowsNetworkUtils:etNAMProxySettings(): Could not found proxy server for Url!
===============================================================
System config :
===============================================================
OS Name   Microsoft Windows XP Professional 32-bit
Version   5.1.2600 Service Pack 3 Build 2600
Processor x86 Family 6 Model 15 Stepping 6
GenuineIntel 2.66 Mhz
ASUS StrikerExtreme ACPI BIOS Revision 1801, 2008-10-23
===============================================================
Troubleshooting so far:
===============================================================
Uninstall Ovi and re-download from Nokia web. Reinstalled Ovi Suite but that didn't work.
I then uninstalled all Ovi and all Nokia related software, cleaned Registry and reinstall Ovi Suite: Failed to fix.
Then I installed Nokia PC Suite 7.1.40.1 which worked just fine with 5800 XM (RM-356 V. 51.0.006). I had no problems making backups or to synchronize.
===============================================================
How to solve this problem?

LOL
I just tried Nokia Ovi Suite again to copy the full error report that it sends to Microsoft.... lo and behold it started to work again?????
======================================================
This I did before I tried
======================================================
Then I installed Nokia PC Suite 7.1.40.1 which worked just fine with 5800 XM (RM-356 V. 51.0.006). I had no problems making backups or to synchronize with Nokia PC Suite.
Made a complete backup on my phone.
Installed Nokia Software Updater and I reinstall the latest FW 51.0.006 to my phone.
Then I organized my content for a few minutes.
Shut down Nokia PC Suite and Nokia Software Updater.
Started up Nokia Ovi Suite.
Connected my phone and clicked on PC-Suite on the options.
It now works again????
Something happened when I installed PC Suite that enabled me to use my Nokia 5800 with Ovi Suite again.

How do I take photo's and video's off my iPhone without using iPhoto? It keeps crashing and to update I need to remove my photos-a catch 22??

How do I take the photo's and video's off my iPhone?... if 'iPhoto' on my mac keeps continually crashing and now refuses to open…?
I need to do this to update my apple software in iTunes, so that I can rid the bugs on my phone and take photo's again.
Is there another way to take the photos/videos off my iPhone and onto the mac? and also to delete them off the phone after I have put them on my hard drive?
It use to be as simple as find, drag and drop into a folder on my old pc. This should be much simpler, any advice or direction extremely welcome……?
From iphotofandango

Hi Iphotofandango,
There is an alternative to using iPhoto for transferring photos from an iOS device. You can use Image Capture, which will allow you to transfer photos easily. Image Capture is a tool already on your Mac. The following article may help:
Image Capture: Transfer images and other items from your device
Transfer images, video clips, and MP3 sounds to your computer from many cameras and devices that contain a camera, such as your iPhone. Once you transfer the items, you can delete them from the device.
Connect your device to your computer, then turn the device on.If the device is locked with a passcode, enter it.
In Image Capture, select the device in the Devices list.
Use the buttons at the bottom of the Image Capture window to view the thumbnails as a list or as icons to change the size of the thumbnails, or to rotate or delete images.
From the Import To pop-up menu, choose where to save the images or which app to use to open the image.
To import only some of the photos, select those photos, then click Import. To import all the photos, click Import All.Choose AutoImporter from the “Connecting this [device] opens” pop-up menu to transfer images from a device to your computer whenever you connect it to your computer.
Select “Delete after Import” to remove the items from the device after transferring them to your computer. You can also select individual items on your device, then press the Delete key on your keyboard.
For more information about connecting and using your device, refer to the documentation that came with it.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Nokia N93 Crashing and Poor Photos

Similar Messages

Maybe you are looking for