Nokia N95 8G can't connect to EAP-PEAP MSCHAPv2 Ne...
HELP HELP HELP!! I have a problem getting my Nokia N95 8G connect to my LSU wireless network,,, Here my network sittings, I tried many possible configurations but, unfortunately, I didn't make it!!!
ESSID (Network Name): lsusecure
Network Type: Infrastructure (or Access Point)
TCP/IP: DHCP
EAP Type: PEAP
Network Authentication: WPA (WPA-enterprise)
Data Encryption: TKIP
Authentication Method/Protocol: MSCHAP-V2
Inner EAP Type: EAP-MSCHAPv2
servers name: acs-wlan.net.lsu.edu;acs-wlan.lsu.edu
Certification Authorities: GTE CyberTrust Global Root
username: whatever
password: urwhatever
for more settings if needed check this link:
http://grok.lsu.edu/Article.aspx?articleId=1465
another think might help, is the certificate for some linux machines, the file is attached(the file name is acs-wlan-cert-chain without extension)...
I hope some of you can make this, I am really need it. Thanks to everybody will help
Attachments:
acs-wlan-cert-chain.txt 2 KB
We have a similar setup at my university in the UK, and by extension many of the sites in the EDUROAM network. The local staff have been working hard at this for a couple of years, but as far as we can tell, Nokia's implimentation just will not work in this scenario under any circumstances. You're going to have to wait until Nokia properly supports this kind of authentication. Our own techs are going to start annoying Nokia about it as soon as they finish this year's wave of wi-fi installations.
Help I'm trapped in a sig factory.
Similar Messages
-
N8 - It can't connect on EAP-PEAP network! Help!
I went to IT department of my University hoping they could give me the right certificate and the right configurations, they did so, then I installed that but I still can't connect! I have searched around the other topics, and the solution was basically on getting the right certificate and changing some configs. Any suggestions?
Here are my configs:
Wi-Fi Security Mode: 802.1x
WPA/WPA2: EAP
EAP Plugin settings: Just EAP-PEAP enabled, others are disabled.
Personal Certificate: Not Defined
Authority Certificate: Unoesc (http://www.unoesc.edu.br/funoesc.crt)
Username in use: 164334
Real in Use: User Defined
Realm: unoesc
TLS privacy: off
Allow PEAPv0: Yes
Allow PEAPv1: No
Allow PEAPv2: NoI forgot to mention that only EAP-MSCHAPv2 is enabled, with my username that is "164334" and my password.
-
Nokia n95 8gb won't connect to pc - start installa...
my Nokia N95 8gb won't connect to pc in any mode.
As soon as I connect it with a cable, it start some installation, fails
and then says that there is a harmful software on the memory space.
Really annoying!
Can't do anything, can't install games or transfer music or anything...
Tried the nokia pc suite cleaner, hard reset and soft reset and everything...
Please help!!!
Sincerely,
Igori suggest you take your phone to nokia care
phones i have 2730c - C1
KUDOS ME IF YOU FIND MY ANSWERS HELP FULL -
E6 EAP-PEAP MSCHAPv2 authority certificate
I am unable to connect to our company WLAN. I tried various username/domain/realm combinations for the EAP-PEAP MSCHAPv2 settings but it keeps giving message authentication failed. Our ocmpany does not have authority certificate and hence I select "not defined". I was told by our network admin that Nokia phones have this problem that they cannot connect without authority certificate.
Is there any work around? I tried excporting an interim certificate of our company from my laptop but to no avail. Pls help.If there is actual workaround to get EAP-PEAP MSCHAPv2 to use with WLAN to use Eduroam, that would help me and many other people.
Maybe Nokia has not build it to Nokia E6 phones.
But if there would be an update for Belle OS to use this security authentication with WLAN that would help as well.
greetings
IT Support, helpdesk (not for Nokia). -
802.1x EAP PEAP MSCHAPv2 on Windows 7 Client.
I have problems autenticate a w7 client at our Enterprice WiFi network. XP, Apple clients and all SmartPhones works fine... We use Radius assigned Vlans based on username and ream routed on our Meru Network to Navis radius as centralied point of
autentication. Navis proxes client autenticatinon recuest to the customers Radiuses based on the realm.
Windows 7 32 client use the radius CA (installed and ticked) and EAP PEAP MSCHAPv2 in the SSID settings. The customer radius is an Freeradius. In autentication logs we se that the client sends the Maschinename, eg. Machine-x200/username@realm
even we in the client settings, under SSID Propirties, Security, MS Protected EAP(PEAP), Settings and EAP-MSCAPv2 Configuration, have removed tick on the default setting:
Use Autom. Windows-username... AND under Security Advanced (back one step), in the 802.1X Settings, choose User autentication only! (not user and maschine, mascine only or guest) and we have saved corectly username@reame =(username here) and password...
in the username password Setting.
Is it possible edit or change the way the client PC is sett up to prevent this?
Is there any way make a policy setting? or is there other solutions?
I have teste te Cisco: PEAP option too, but stil noe autenticatoin from Radius
ThanksHi,
As I know, this goal cannot be achieved.
Reference:
Use the 802.1X Wizard to Configure NPS Network Policies
For authentication using Extensible Authentication Protocol – Transport Layer Security (EAP-TLS), select
Microsoft: Smart Card or other certificate, click
Configure, click
OK, and then click
Next.
For authentication using Protected Extensible Authentication Protocol – Transport Layer Security (PEAP-TLS), select
Microsoft: Protected EAP (PEAP). In
Eap Types, click
Add, click
Smart Card or other certificate, click the
Move Up button to position a smart card or other certificate at the top of the list, click
OK, and then click
Next.
For secure password authentication using Protected Extensible Authentication Protocol – Microsoft Challenge Handshake Authentication Protocol
version 2 (PEAP-MS-CHAP v2), select Microsoft: Protected EAP (PEAP). In
Eap Types, click
Add, click
Secured password (EPA-MSCHAP v2), click the
Move Up button to position the secured password authentication type at the top of the list, click
OK, and then click
Next.
Regards,
Sabrina
TechNet Subscriber Support
in forum.
If you have any feedback on our support, please contact
[email protected]
This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be beneficial to other community members reading the thread. -
N95 8GB won't connect to EAP-TLS secured WLAN
Hi all,
Has anyone succeeded in connecting to EAP-TLS secured wifi network? I have an N95 8GB with the latest firmware (updated yesterday) that cannot connect to my office wlan.
I’ve been reading this forum (and others google found) and here’s what I’ve done:
* defined an access point with 802.1x security mode and EAP-TLS
* exported the certificate from my IE, imported it into the phone and selected it in the Personal Certificate filed
* selected the accompanying rootCA certificate as Authority Certificate (tried leaving it blank as well)
* tried different Ciphers just in case
Every connection attempt results in "EAP-TLS authentication failed" and I’m never asked for password.
I’ve been talking to our admin (I’m afraid he’ll start to hate me before too long ) and found out that after the firmware upgrade and a couple of hours of trying this-or-that I’ve managed to have proper username sent to the server. But the message remains.
Here’s a part of the event log forwarded to me by the admin (fully qualified username is stripped by him but it seems to be correct):
Event Type: Warning
Event Source: IAS
Event Category: None
Event ID: 2
Client-Friendly-Name = wifi2
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 46
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server =
Policy-Name = wifi
Authentication-Type = EAP
EAP-Type =
Reason-Code = 22
Reason = The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server
As far as I can see my nokia cannot use a proper EAP-Type. Does anyone have a clue on what to do?
George
P.S. I believe we are using Radius server and a google search for the stated Reason gives a number of Radius-related results, but they describe cases when PC's cannot connect. I can connect to the wlan with my laptop with no prob (but it asks for credentials each time - don't know if it matters).Hi
Even I am facing the same problem.
However Opera 8.65 is working fine with the said configuration
-Ramesh V -
Nokia Ovi Suite can't connect to Internet
Hi
I was using an old version of Ovi that come with my N95 in a CD.
I'm trying to update my N95 with a new firmware and that request to update Ovi.
After the update I can't login to Ovi in order to update.
There's any problem that Ovi software can't connect or something else.
Obviously, I'm connected to the Internet.
BTW... where's the spanish forum or help assistance?
Thanks in advance!I have the same problem on pc in the office. I uninstalled and installed the old ovi suite 2, but it dosn`t work. When You connect Your phone it will do, but connect to Your Ovi account through the telefone. I havn`t got any answer until today.
I use Nokia 5230, want to connect to my Ovi account also, when the phone isnt connected to the pc. I hope, we will got a resolution.
By installing the old Ovi suite there are only problems with winxp, it dosn`t work really. Thank everyone for help or answer. philipp -
Nokia n95 8gb pc suite connection problem
hi,
i just bought a nokia 95 8gb and i tried connecting it to my pc via usb cable dke-2 .. my phone recognizes a connection .. i select pc suite .. but my pc doesn't .. when i connect the phone it plays a sort of a beep .. it does at every usb connection .. can anyone help me out ?
V 11.0.026
01-11-07
RM-320
Nokia N95 (83.01)This is a very common problem it seems, from Googling around for different help solutions. In fact, I'm here because of the same issue. WHich is why I find it slightly annoying that no one from Nokia can be bothered to post a definative solution in an FAQ or something, or maybe just post here to point people in the right direction.
Despite all the attention being garnered by Android and Apple, Nokia is STILL the worlds largest manufacturer of mobile phones, and N95 8GB/N96/N97 users are probably still your loyal base of 'power' users. I for one have a smartphone because my contract was due for renewal, but still use the normally trusty N95/8 (now looking a little weatherbeaten!). Now, if you're going to convince us to try the N8 on our next contracts, it would be nice to see a few more updates and responses to ovi problems. Can we still 'downgrade' to PC suite? Perhaps I'll go and have a look. -
Nokia 2730classic app can't connect to internet
Hi, I'm trying to use the E-mail application of my phone (Nokia 2730 classic) but when I try to connect it says "Comunication Error", I've tried with the Opera mini browser and the native web browser and definitely there is a internet connection available, but when I try with other apps (with the appropiate permissions) there's errors everywhere, "can't connect" "Comunication Error" etc etc etc, does anybody know something about it ? thanks for reading
I have the same problem on pc in the office. I uninstalled and installed the old ovi suite 2, but it dosn`t work. When You connect Your phone it will do, but connect to Your Ovi account through the telefone. I havn`t got any answer until today.
I use Nokia 5230, want to connect to my Ovi account also, when the phone isnt connected to the pc. I hope, we will got a resolution.
By installing the old Ovi suite there are only problems with winxp, it dosn`t work really. Thank everyone for help or answer. philipp -
Nokia n95 8gb can't find gps satellite in uae
Hello
I just bought nokia n95 8gb, but when I wanted to use the maps it never find a satellite connection I tried every thing I even give it to the shop for fixing the issue but nothing the shop did a reprogramming but also nothing it want work so any help plsssss, and did nokia close them satellite or what LOL cause it's killing me and I really need it, to use maps for almost every day cause I'm new to the area I'm living in today plssss any help
Solved!
Go to Solution.asimaskir wrote:
I even give it to the shop for fixing the issue but nothing the shop did a reprogramming
All existing ephemeris GPS data would be lost by software re-installation so as farby points out initial positional fix may take up to 30 minutes.
Also check to see whether device has Ovi Maps v3.01 now installed as not part of firmware:
http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-n95-8...
Happy to have helped forum with a Support Ratio = 42.5 -
How to connect to AP with WPA2, EAP-PEAP, MSCHAPv2...
I am trying to connect to the company network, but it always shows "PEAP authentication failed".
There are only instructions for iPhone and PC.
security : WPA2-Enterprise
authority certificate : None
Security Type : PEAP
Inner Link Security : EAP-MSCHAPv2
additionally MAC address filtering.
The access point I set is as follows:
network status: public
wLAN network mode: infrastructure
security: WPA/WPA2
WPA2 only mode: off
EAP plug-in setting: EAP-PEAP enable only
personal certificate: not defined
authority certificate: not defined
user name: user-defined BLANK
realm in use: user-defined BLANK
allow PEAPv0
MSCHAPv2
user name: username
password: mypassword
We have domain, but there are no command about domain in iPhone guide.
Is there anything wrong of my setting?WPA2-Enterprise is not supported on your device.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Wireless WPA2-Enterprise + 802.1x (EAP-PEAP/MSCHAPv2) config
Hello,
We're in the process of moving all of our wireless from WPA-PSK to WPA2-Enterprise with 802.1x EAP-MSCHAPv2 (PEAP). All workstations are Windows 7 with the 2SP3 IR2 client. What we'd like is for the 802.1x SSO functionality to work so users do not have to sign in computer only first and then use the novell login after connecting. I've followed the documentation for enabling 802.1x that Novell provides with no success. I'm hoping someone has done this or can point me in the direction of documentation that can use to better understand what configuration is needed to make this work.Originally Posted by djaquays
I haven't had a chance to play with this yet on IR8, but I'd be curious of your steps to get this working.
I'm not sure why FreeRadius would make any difference vs ClearPass.. they both speak RADIUS.
This is the only documentation I can find from Novell: https://www.novell.com/documentation...a/b8jn9w6.html
It's a couple of years since I did this so my memory is a bit vague... :(
Did you install the peap plugin on the workstation, if I remeber correctly this was needed?
http://support.arubanetworks.com/TOO...4/Default.aspx
Thomas -
Can I connect my Nokia 6630 to my Mac OS X 10.3.9?
Hi,
I have done a search but unfortunately can't find the answer to my query.
I have just bought a Nokia 6630. Can I connect it via USB to my Mac with OS X 10.3.9, and if so, where can I find the software?
Many thanks in advance for your helpHi emma_p
I am not sure that there ever has been an adapted plug-in for 6630 to work with Panther unfortunately, as I think it was first listed in iSync v2.0 in Tiger.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Can i connect to net via satellite
dear all
many thanks for this site ,i want to ask can i connect to inernet via satellite although i have nokia N95 8GB
CAN I DO IT OR NO?
PLZ ,ANSWER ME
THANKSNo, that is impossible on any normal phone from any of the major manufacturers.
The only information that your phone is capable of getting from satellites is GPS data for positioning and navigation.
Message Edited by psychomania on 07-Apr-2009 09:31 PM -
Nokia 3500 classic and its connectivity with Linux...
Hi All,
Can you tell me if nokia 3500 classic can be connected to a linux PC or not?
I am in a hurry.
Thank you.Me too I'm having almost the same problem.I'm from Mauritius.
My configurations:
Windows XP Professional SP3
Phone Model:Nokia 3500 classic
Cable usedKE-2
Nokia PC Suite 7.1.18.0
I've got a Nokia 3500 Classic & tried to connect it to my PC,which has Nokia PC Suite 7.1.18.0 installed.
When I connect it to my PC,the PC displays the message "Nokia 3500c connected via USB".
The grey icon becomes blue/green.
When I click on "Backup",Nokia Content Copier loads.When I click on "Back up the desired phone contents to a backup file which is saved on the PC", I get the message "Failed to open connection to the selected phone.Reconnect your phone and try again."
When I open Nokia PC Sync, it displays "Not connected".
When I start Contacts, it says "Refreshing of contacts failed."
When I open Nokia Communication Centre-Calendar,it displays "The Calendar View could not read the entries from your device".
When I open Nokia Music Manager,somewhere it's written "Nokia 3500c(Not supported)".
When I go on Nokia Image Store,it displays "No supported phones connected".
How come that my mobile appears to be connected to my PC,but applications inside PC Suite do not detect my mobile?
Maybe you are looking for
-
Installation problem on AIX ( SAP4.7, Oracle-9i)
Hello Gurus, We are installaing SAP4.7 on AIX with oracle-9i as an database we have completed central instance successfully, while database instance we are facing error I am attaching error log for your referenec error log You entered: /sapcd/oracle9
-
Colour issue with 'Save for Web' - Photoshop Elements 6 (Mac)
Cross posted here, but no answer so far. Sorry for cross posting. For me, this is urgent, but I know it's not for anyone else, so apologies for putting 'urgent'. http://www.mac-forums.com/forums/images-graphic-design-digital-photography/150670-colour
-
Report in P6 Optional not showing activities set by a simple filter
it's hopefully a simple one. Created a report with an open project, looking at activites - rerpot shows all activities When i then add a filter to that report of Finish date = 1st October, I would expect to see all activities finish on that date. The
-
Dynamic data on Screen -Display data Based On the First Field
hello Helping Minds.. I have Two Fields In MODULEPOOL SCREEN. 1--- BUKRS 2--- BELNR ..... Both From BKPF table. My requirement is When i select a CompanyCode ( BUKRS ) In d first field,all the DocumentNO ( BELNR ) related to that CompCOde Shd be disp
-
Hos do I get rid of bullets on the printed page of laserjerjet 1020?
Regardless of the print job, my Laserjet 1020 always prints unwanted bullets down the left margin.