Nokia N95 in Black Screen, No display. Help!!

Dear Sir/Madam:
I have a Nokia N95 for few months. Now my phone is not power on, I took the phone to service center, they said is my phone software problem. The problem is the cable get disconnected when I was updating my phone firmware or software. Now the screen is black no picture show on screen. Is any software can fix my software issue. My Nokia N95-1 Sand and WLAN: 001ADCDBB04E. The repair phone tech said, nokia able to fix, all I need is a software. Is anyone can help me or email me what to do and which office I should contact to have support. I been tried contact HK branch and USA banch, they not able to help. such a big company, No one can help. Can any Help me problem. Thanks!!!!
Removed IMEI NO.Message Edited by adisaily on 17-Aug-2007 08:44 AM

This problem can only be fixed at a nokia care point using specialist equipment.
It is not possible to fix it yourself.

Similar Messages

  • I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!

    I have a iPod classic 2gb. I haven't used in years and I charged it for 3 hours and it won't turn on and I tried resetting and nothing. I plugged it into iTunes and iTunes doesn't even recognize it. I just have a black screen. PLEASE HELP!!!

    I'm sorry it's a nano 2gb silver

  • My iphone 4s just shut off and when i charge it the apple appears but it goes back to black screen...help please?

    my iphone 4s just shut off and when i charge it the apple appears but it goes back to black screen...help please?

    Hi Haleynichole_99!
    I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Nokia N95 8GB phone Screen not working

    Hi Friends,
    I have a Nokia N95 8GB phone, it was dropped while catching a bus, from then the screen is not working, but the phone works fine.
    Pls do help me to get back the screen, any suggestions and guidelines are welcome, I am new to forum, I will be glad to hear from you and sort out the problem.
    Have a nice day and a very good Easter.
    Cheers

    You need to take the phone to a nokia care point for repair. You can find the details of your nearest via the "contact us" link near the top of the page.
    We cannot help you with any self repairs here as it's against the rules of this forum to discuss disassembly.

  • FlashPlayer suddenly turns black screen, urgent plz help

    I am a game developer. my game work fine for two months. but recently some player told me that when in playing games flashplayer suddenly turns black screen. when i using flashplayer debug. it didn't throw any excepetion or error. and when i right click in flashplayer content. the menu show 2 opptions. do not load movie and flashplayer verison is 11.6.602.180...
    many many player told me about this. and my game is still running for all the player. so plz help, verry urgent, thx

    If they are on Windows, they may need to update their display adapter drivers; see http://forums.adobe.com/thread/945765

  • Built in cam show black screen lenovo G5030 help please

    Hi, please help my bulit in lenovo G5030 cam is showing black screen! the light is on but only black screen!!
    it shows this black screen in the cam utility and also camtasia studo ans skype! nothing works!
    i have tried it with both windows 7 32-bit and now 64-bit
    and i have uninstalled and installed it's driver several times but no joy!
    please help

    I had a similar problem on a Yoga 3 Pro and no matter what I did, it did not work. So I tried a tool that I have had other people run as a malware repair, and it fixed it right up. But I did not write down what the error was. I do not know if this will fix your problem.
    The tool is called Windows Repair (All In One) If you want to give it a try, the instructions are below.
    Download Portable Windows Repair (all in one) from one of the following:
    http://www.tweaking.com/content/page/windows_repai​r_all_in_one.html
    http://www.majorgeeks.com/Tweaking.com_-_Windows_R​epair_Portable_d7222.html
    http://www.bleepingcomputer.com/download/windows-r​epair-all-in-one-portable/
    Unzip the contents into a newly created folder on your desktop. Make sure your AV protection is turned OFF before running the tool....
    Open the folder, run the tool by right click on Repair_Windows (icon with red briefcase) select "Run as Administrator"
    From the main GUI do the following:
    Select Tab 3 and allow it to run Disk check
    Select Tab 4 and allow it to run SFC
    Select Tab 5 and Create System Restore Point
    Select Start Repairs tab => Click the Start
    The repairs window will open, uncheck the boxes as indicated, also the "Restart" option, then select Start...
    DON'T use the computer while each scan is in progress.
    Hoov
    Microsoft MVP - Consumer Security
    SpywareHammer.com

  • Black screen  with :/root#   HELP PLEASE

    HI I have try everything 1 start safe mode 2 reset nvram
    3start from the disk 4 I have try to repair the disk with disk aid but I got a error message error:the uderlying task report failure on exit (-9972)
    but no matter what my computer it always going back to a black screen with :/root# and the cursor for write
    Can anybody give me any advise on the matter?Any help is very much appreciate.Thank you

    Solutions:
    If possible and needed, back up data before troubleshooting. Methods (4) and (5) are for Power Mac desktop computers other than G5 models. The best bet is method (4) if you encounter multiple bad errors.
    1. Unplug the power cord. Disconnect all third-party hardware except Apple keyboard and mouse before you start.
    2. Do NOT re-install any third-party software/hardware until you completely solve the issue(s) and carefully investigate the compatibility with Mac OS X 10.3.x you install.
    3. If another critical error "Invalid sibling link" is detected at any phases, disconnect and reconnect all internal power cords and data cables for hard drives and any ATAPI device. To do so, you may need to read the computer's CIP Instructions in advance. Normally, you do not need to remove third-party RAMs.
    Method 1:
    (1) Start up from Mac OS X 10.3.x Panther Full Install CD or DVD.
    (2) Re-initialize and re-partition the hard drive. RECOMMENDATION: Select "Zero all data" option if "Invalid node structure" or "Keys Out of Order" error is detected.
    If this method is of avail, go to Method 2 or greater.
    Method 2:
    (1) Start up in Mac OS 9.2.2 and shut down the computer.
    (2) Start up from a copy of a Disk Warrior bootable CD for Mac OS 9.2.2.
    (3) Run DW to fix the damage(s)
    Method 3:
    (1) Unplug the computer.
    (2) Find a second ATA drive and jumper it as MASTER. Jumper the hard drive in question as SLAVE. Verify the jumper pin settings.
    (3) Install Mac OS 9.2.x system on the MASTER drive, and update it to Mac OS 9.2.2.
    (4) Start up from Mac OS 9.2.2. Re-initialize and re-partition the damaged hard drive with Drive Setup using the "Zero a
    Method 4:
    (1) Find a desktop computer that has an ATA controller PCI card (SCSI environment) and has two hard drive bays. This will make your damaged drive appear as a quasi-SCSI hard drive. Mac OS 9.2.2 must be pre-installed on the computer. I recommend a host computer that installs an Ultra DMA/xxx or xxx (ATA-x) interface equal to or better than the damaged drive with backwards compatible.

  • Nokia n95 8gb moisture in camera lens - HELP

    Hi, I have Nokia n95 8gb and while have been in a shower I have left it in the bathroom and now my lenses are moistured/water from inside of camera/lens. How can I fix/dry this?
    PLEASEEE HELP ME.

    Many people take the phone into the bathroom whilst taking a bath or shower not realising this actually harms your phone!
    Steam has entered the phone and turned to condensation and this is never good for an electrical product.
    This will probably cause you many problems sooner or later, but for now remove the battery as having the battery in the phone whilst it is still wet is damaging your phone with current from the battery surging through all those components joint together inside with water.
    Then put the phone in a warm dry place, where you have your boiler for your home as an example, and leave it there for a few days.
    This should dry out any liquid there is inside the phone but only time will tell of the amount of damage has occured.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • Nokia N95-2 (8GB) Button Problem(Pls Help)

    Hello all.
    few days ago,my nokia n95 8gb started to making problems.
    The (*) star button is pushing itself...
    when i dont touch phone,its just typing (*) by itself...
    i though it was virus or something,so i first restarted it to factory settings,but it didnt worked.
    i even formated it with (Green,* and 3) buttons but it didnt helped.
    so the point is,i cant make calls,becouse its typing (*) by itself,and i can do nothing...
    Also the problem is,that there is no nokia center in Bosnia and Herzegovina,sto i dont know what to do....
    Any reply will help.
    Thanks in advance...

    unfotunately it looks like a physical problem, and the only solution would be care point, I would suggest contacting Nokia direct, and possibly posting the handset to the closeset repair centre.
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Iphoto.  When I play an album "slideshow" some photos show up as a blank/black screen.  Please help if you know what I am doing wrong.

    Iphoto Question
    When I playing a "slideshow" album, a few photos show up as a blank screen.  Also, when I select a photo in an album to make it full screen - some photos won't "hold" - they go full screen for about a second, then the screen goes blank.  Any ideas about what I am doing wrong?  Thank you.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help: As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Nokia N95 8GO data or memory recovery help!!! Plea...

    Hi I currently had a Nokia N95 8GO mobile but have dropped it and pretty much the outside has been broken to pieces although the internal hardware etc looks like it hasnt been too affected by unfortunate accident.
    It wont turn on but am wondering whether there is a way in trying to recover my photos!! (very important) from the internal memory using the motherboard which as mentioned is in still good condition.
    If anyone can help or provide any information or assistance it will be greatly appreciated.
    Thanks
    Message Edited by tleupolu2010 on 21-Dec-2009 09:59 PM

    It depends on how much the photos are worth to you. There are companies that specialise in data recovery but it will probably cost you quite a bit. Google data recovery to find one nearest you.

  • Fully black screen on ipod - help

    this started yesterday
    ipod kept skipping tracks, then didnt play any, took time to skip through, the click sound worked but the screen didnt change. left it to charge and now nothin plays. restarted it, apple comes up, ok file comes up dealt with this befor took the steps...
    still no happiness...
    today i think my lil iteligent pod has died. it makes loud dieing noises and restarts itself and fades from the apple icon to a black screen...
    this honestly cant happen rite? is my ipod officialy dead?
    any help would be great thanks
    4th gen. 40 gb   Windows XP Pro   --

    The Five Rs would be the place to start, but you're right, it doesn't sound too good. : (

  • HT4279 my computer will not start black screen no noise help?

    help i cannot get anything but a black screen from my mac book new batteries in mouse and keyboard wifi is on help me please

    Hi Soulmates,
    Thanks for visiting Apple Support Communities.
    Try the steps in this article first if your Mac is not starting up:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    Regards,
    Jeremy

  • Nokia n95 8g connecting to computer please help me...

    Hello people im totally new to all this ive just got a nokia n95 and im tryin to put pictures from my computer to my phone.
    I want to do like a drop and drag so you basically go on my computer and open my removeble disc that would be the phone.
    Then i can drop my pics in there.
    I got it to do this once pictures were on the phone all was good then suddenly lost it all and cant get back to using this method i dont want to use the nokia system please help thanks

    I played with different methods. For me, the easiest is to open Nokia PC suite and drag/drop jpg files onto the drop zone. If you can autoconnect via bluetooth, this couldn't be much easier.
    You can do this for audio files also.

  • I can't get rid of the black screen...Help

    When i launch Final Cut Pro, all i get is a black screen. When i move the curser to the top of the screen i then get the drop down options showing all the option headings. I can view the main pages, but as soon as i try to do anything with the software, it goes straight back to the black screen.
    I realise i have probably clicked on something i should not have done, but how do i clear it.
    TY
    Message was edited by: pj525i

    I don't understand what you mean when you say 'I can view the main pages', but, you've probably set your video playback to full screen.
    Move the cursor to the top of the screen and go to View, down at the bottom of the list go to Video Playback, and then select 'None' from the list of options.

Maybe you are looking for

  • Syncing to iPad copies Master

    I upgraded from iPhoto to Aperture recently.  All seems good, and I'm getting to grips with the new application.  Once problem I'm having is syncing photos to my iPad.  I've created Albums in Aperture which are synchronised with my iPad.  This works

  • HELP Can't call terminal by Mod4+Enter (awesome wm)

    I can't call terminal by binding key Mod4+Enter. What wrong happened with my rc.lua ?. Please help me. My english not well, sorry everyone.! -- z1lt0id Awesome WM 3.5.+ config -- -- github.com/z1lt0id -- -- Varation of github.com/copycat -- -- Requir

  • PR to PO & release of Unspent Commitment

    Hi, I have created a Internal order with 15000 as commitment. Now used the same Internal Order for creation of a Purch Requisition (PR). Then at time of creating a PO from PR, i used only 8500 as order value. Now, 1. how to release the balance unspen

  • ESS + JCO + Multiple backend support

    XSS with multiple backends Hi All, we have a portal running with the standard ESS business package u2013 we use the system for demo purposes, and would like to be able to connect to different backend systems u2013 depending on the user. IE, user XX c

  • HP Presario CQ61 Notebook no audio from internet websites CNN, etc, audio w/media player, iTunes.

    HP Presario CQ61 Notebook, Windows 7 OS. No error messages. I made no changes except for automatic upates.  I was listening to and trying to follow instructions for troubleshooting an ACER netbook on YouTube when I lost audio. I have not had audio fr