Nokia N95 - reset after activating voice dialing

firmware 11.0.026 for EURO-3
Every time I press and hold the right selection key to activate voice dialing, a short tone is played, Speak now is displayed, ... and unfortunately phone reset is executed.
Does anybody have similar experience?Message Edited by slawmilcz on 25-May-200705:58 PM

I understand that nobody else reports such a problem.
I don't know what`s wrong, as I never succeeded in this operation.
When "Speak now" is displayed and progress appears, phone reset is executed every time I try to activate this function.
I'm not sure if it worked on the previous firmware version of my phone.
It may only fail in firmware 11.0.026 with product code 0536074 (EURO3).
Maybe I would have to try firmware 11.0.026 with product code 0534852 (EURO3).
Is it completely the same firmware?
I have found information that the product code is different for various colors of phone. Is it really the only difference?

Similar Messages

Disable voice dial on Nokia 6263.

I have an Australian accent, so the voice dial feature is about as useful to me as a cardboard umbrella. Unfortunately it seems that even after turning off every voice-related option I can, if I nudge, knock, brush, or even press the button on my headset to turn it off for to short a time it will decide "oh, that's a tap, he wants to voice dial".
It's worse than having a 5 year old who's just discovered how to speed dial.
I want to gut, eviscerate, eliminate, disintegrate, annihilate, and disable with extreme prejudice every jot, tittle, pinch, hint, or skerrick of support for "voice dial" in my Nokia 6263.
Am I SOL?

atti wrote:
Well, i have a nokia 5310, i had the same problem, call some of my contacts couple of time a day.
But my voice dialing activation key is not the volume but the clip button on the wired headphone, or the one on the top right.
I did lots of research on this, I don't how to diable this, and find it work(stop random calling my contacts) by myself if I lock the phone with a security key activated. Once the keyboard is locked, you can not dial unless you insert the security key.
<how to activate the security key>---main menu---->setting---->phones setting ----->security keyguard on------->setup your security keyguard. If you don't want to activate your security keyguard, you can turn it off any time. Also, change your security code by going to main menu---->settting---->security---->access code---->change security code.
Cheers!
I also have a Nokia 5310 and was having the same problem. I found that after I reset the phone settings (menu>settings>Rest.factory sett.>Restore settings only), when voice dialing is activated, the phone activates the "train voice recognition" feature instead of actually doing any voice recognition/voice dialing. The phone just sits there and waits for user input. I'm not sure if the 6263 has a "train voice recognition" feature, but if it does, this may work for you.

Nokia N96, Bluetooth, and voice-dialing....

Hi,
I upgraded from my N80 to an N96 and, being a rep and frequently on the road, Im finding the voice-dialing to be a real PITA.
The N80 would work just about anywhere. Car, street, pub, shops, wherever, it understood who I wanted to call. Not perfect, but close.
The N96 doesnt even PRETEND to understand me, throwing up any name at random it seems.
Worse, it is all very haphazard to use.
You press the top right function button and hold it down. On the N96, you could hold it for a very long time before it responds. Since the processor in this phone is way underpowered, it a second or two before your hear the Speak Now confirmatory beeps.
Couple that with the problem that many Bluetooth headsets power-down momentarily, it means that when youre driving along in the car and hold the button down on your BT headset, you dont actually hear the beeps. So you have to look down at the phone to see what its doing. While driving, this can be dangerous.
Now, because you ARE driving, the N96 is not likely to understand you anyway.
Nokia!! You need to go back to the drawing board here!!
1) Fix the voice-dial activation - pressing the top-right button for two seconds is plenty.
2) Play the bleeps WHEN the Speak Now screen comes up, not before! My N96 can take anywhere between 1 and 5 seconds between the bleeps and the Speak Now screen appearing!
3) Play the bleeps a bit longer when the Bluetooth headset is activated. Most Bluetooth headsets take a second or two to wake up - the sound is over by then and you miss it.
4) Go back to the N80 and read the code for what you did in that phone. It worked fine there!
Ian Nicholson
Poor Sod/N96 Owner
Nokia: Connecting People... with iPhones.

Still here is no improvement with voice dialing with ver 12 soft and training sessions to n96.
It handles well with some names, but not with most. My old N95 did it much better from beginning (no training need!).
And extra case is with bluetooth HF - I stopped for waiting now for this stupid "beep" that is coming or before or after or in the middle the time, when voice detection screen is there. Now I just try to say the name about 2 sec after pressing BT button.
So, I hope some good Nokia engineer happens to read those voice dialing posts and in soft ver 13 we get better dialing (and finally somehow faster phone). Or do we, all who don't like extra slow processor should go in same day to service/operator and give in protest about the speed..

N95 8GB restarts when trying to use Voice Dial on ...

Ok, so when I have my N95 8GB connected to either a line-out speaker or a blue-tooth earphone, the strangest thing happens. When I try to use voice-dial, right after I say the name I want to dial - the phone freezes. When I press any key on the phone, it restarts. Voice dial works fine when no external device is attached, but if I even connect earphones - it breaks. Anyone experienced this? I'm using FW 35.0.001 Thanks, Ambious

It sounds like that where the phone stores the voice tags has become corrupt so that when the unit tries to access them the phone gets unrecognised data which in turn resets the handset.
Take the unit to yur nearest NSC for a software upgrade.
Hope this works for you.
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

Nokia n95 voice navigation

i have a nokia n95 and have registered for the full navigation. however i cannot get the voice directions to work, anysuggestions. i have checked the voice settings on the phone and but have to keep resetting. I have also noted it says i may have to download voice software???!???!

When you do get the Voice By download
here is a glitch
The N95 does not drop the bluetooth conection between instructions
If you have a car kit the radio will remain muted for the duration of the journey I have contacted nokia and despite changing the phone and 2 software uodates the problem persists
I have a work around Buy tomtom navigator 6
and a bluetooth gps antenna The system the works OK
What I need from nokia is fix the bug or allow the N95 to use the internal GPS antenna with tomtom
to meet their adverts of GPS installed for mobile use
AND a car mount that charges the phone I have had to get the brodit again as with my N73
When will nokia learn A GPS CAR navigation system needs to work in a car with ease and a simple connection to Holder carkit and Charger
Nokia user / modder since Nokia Orange and Mobira user too before that

Voice dial turns on after Update

Hello,
first, sorry for my bad english.
I have an iPhone 5S. I deactivated Voice Dial (Settings - General - Touch ID - Voice Dial) because my little daughter loves to play with my iPhone. But after any iOS Update, the Voice Dial function is turned on. And after any Update i recognized it after my daughter "call" someone. Hope Apple will fix this bug.

Are you sure you lost the app, or did you just lose the widget? Reason I'm asking is that the small square widget that we had in Gingerbread was replaced by a bar-looking widget in ICS; Google Search and Voice Search are now combined on that bar-looking widget (the Google Search widget mentioned in the earlier post). Since you said that the Play Store said it was installed on the phone, have you verified that by going into Manage Apps and seeing if Voice Search is listed under All?

Voice dial not working after upgrading to iOS 5

After I upgraded my iPhone 4's operating system to iOS 5, voice dial is not working any more. When I press and hold the home button, voice control is enabled but only music-realted features (such as play, pause, etc) and "what time it is" work. The "dial XXX" and "call NAME" option don't work any more, and in the blue screen that is shown for voice control, I don't see the word "dial" appearing any more.
My friend who has iPhone 3GS upgraded and she doesn't have this problem.
Do I have this problem because I made a mistake during upgrade?
Is there some place where you can specifically disable/enable voice dial?
Or, is it Apple who disabled this feature, to temp iPhone 4 users to upgrade to iPhone 4S to have that feature back?

No, because I don't even know how to do that. I just restored the phone to one of the previous backups I had, using iTunes. The OS was unchanged (iOS 5) but the functionality was restored.
In this process, I lost all my applications, but my notes, contacts, etc were untouched (see below). As for apps, all I had to do was to look at the list of my apps in iTunes, and reinstall them.
If you want to do the same thing, note that you may lose your contacts or notes if you simply restore an old backup. Before you do so, enable iCloud and make sure your contacts and notes (and other important things) are backed up in iCloud. Then, after restoring your phone, enable iCloud again and it will fetch all the contacts, notes, etc that you might have added after that backup you just restored.

IPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

iPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

Hi! It seems you found a bug on iOS 7.1
To disable Voice dials try this, (I saw in an iPhone website here in Brazil):
1. Turn on Siri (settings > General > Siri)
2. go to (Settings >Passcode > Voice Dial) trust me, it appears now
3. disable Voice Dial
4. go back and disable Siri
hope this could help you!!

Browser Encoding problem after update Nokia N95 8G...

Hi
I installed the software update for my phone Nokia N95 8GB, every thing goes fine, after completing the update I am not able to browse any arabic web page ( it is unreadable ) even if you change the default encoding to all possible values, does any one has an answer to this problem
Software update to:-
V 20.2.005
30-04-08
RM-421
NOKIA N95 (A6.02)

THANNNNNNNNNNNNks

Nokia N95 Mobile Search 4.0 update error after fir...

I upgraded to Nokia N95 new firmware i.e. 20.0.015
I got the new Search in the menu and on active standby. But the application does not work. I downloaded it from the nokia mobile search site but during installation it says "Update Error!"
I cannot see how to uninstall the one which came with firmware. In short it is not working. Rest everything is cool with the new update.
Awaiting your valued repsones.

13-Dec-2007 07:41 AM
drjeckyll wrote:
I have the same problem, but resolved like this:
remove memory card ... put in your pc ... go to:
resource/apps/
delete all files like MobileSeearch*.*
put back memory card and Njoy
P.S. may be you can do this with Y-Browser, FExplorer or somethin' but I never try since I already fixed my problem
I can confirm this works!!
Thanks!!!

Nokia 3650 disconnects after dialing ISP

Using the Nokia IR 6210_8xxx script, I am able to successfully establish a Bluetooth connection with my Nokia 3650, but after dialing it simply disconnects.
I can manually dial the ISP from the 3650 and listen to the handshake.
Prior to installing Tiger, I was able to do a dial-up connection using the Nokia 3650 as a modem.

Thanks Alexander and Stephen oh that I had found Stephen's link before I got my phone to work, it might have saved me hours of fun, but as I was sitting on a remote Scottish Island, it was only after I got it to work that I could read it.
The Nokia now works perfectly on the UK's O2 service (albeit at a pitiful 9,200) and I even took half a dozen photographs with the phone, transferred them to my iBook, then sent them via the telephone attached to an e-mail.
I never discovered what the problem was other than painstakingly repeating the pairing and bluetooth dial-up settings until both the phone and the computer believed me.
The only small sensitivity I have discovered is that it is completely reliable if I put the bluetooth dongle in the USB socket with the machine switched off, then fire it up.
I know that it is slow using the phone as a modem on the GSM network, but even paying for the extra time involved, it is nowhere near as expensive as being charged at the data rates on GPRS.
George

Nokia 6280 Voice Dialing

Hi Wong here,
Can any one help me on Nokia 6280.
How to make a voice dialing call.
I try it by pressing the right button, it show me Voice system Error.

Sometimes it helps to change the phone language to non-english and then back to english.

Bluetooth activating BB's voice dialing

Hi everybody I am using BB Curve 8330 OS v4.5.0.131 (platform 3.4.0.25)
carrier is Sprint.
I disabled the button on the left to stop voice dialing. I use a bluetooth samsung wep 460 and wep 200 as well. when I press the end call button on the bluetooth when i am not in call, then it activates the bb's voice dialing feature and ask me "say a command" .this is the problem. how do i disable this feature alltogether in blackberry so even i press this button on the bluetooth the voice activation wont come. If you ask why am i pressing that button when i am not in a call? it happens when I put the bluetooth in my ear mistakenly that button get pressed and if there was a background sound like squeeke door opening then it will dial automatically my friend Peg. Ouch...LOL
Thanks You

I had the exact same issue when I started playing with voice dialing with the Treo 800w. Here's what I did to get it working. This assumes you already have abluetooth headset that connects with the phone.
Goto Start--> Settings-->Voice Command.
Check the box for "Enabled".
In the window entitled "Check items are voice enabled", I checked the box next to "Phone" and "Contacts". Hit ok.
Now the part that I couldn't find documented anywhere:
On your bluetooth headset hit and release one time the "call/answer button" (sometimes refered to as the "use" button).
For me the button beeps when I click it, the a second later a single beep comes through the earpiece. That beep tells me that the microphone is active on the headset (the bluetooth icon on theTreo 800w will change to a headset icon).
I then say "Call" then the name of whoever I want to call. The phone appears to use the names in your contacts list, so if your mom is listed as mom you would say "call mom" if she's listed as Jane Smith you would say "Jane Smith".
If the phone is unsure exactly what you requested a computerized voice may come through the earpiece and ask as you a couple of things:
please repeat -- just say "call" and repeat the name of the person you want to call
call Jane Smith? -- just answer "yes" if you wanted to call Jane Smith or "no" if you wanted to call someone else.
I really think this could have been better documented. I'm a new Treo 800w user and brand spanking new to bluetooth.
this is what I did to get mine working.
Post relates to: Treo 800w (Sprint)

Isync to Nokia N95 after snow leopard install

I'm experiencing inconsistencies with syncing my calendar (BusyCal) to my Nokia N95 - occasionally new info will appear on the computer when first entered on the phone (and vice versa), but generally it appears that no syncing is taking place. As far as I can tell I have the most updated versions of iSync and BusyCal. Has anyone else had this happen? Any solutions/suggestions would be most appreciated.

Thanks for the suggestion - I had a lot of contact with BusyCal today (the tech support was fantastic), although we still haven't resolved the problem. We discovered there is an issue even between iCal and BusyCal (syncs in one direction only, from BusyCal to iCal, but not in reverse); I tried resetting my phone (in 'reset device' of iSync), but still a problem... Not sure what to do next, so I might just have to tough it out for a couple of weeks.

Nokia 6301 and BT headset voice activated dialling

Hi
I have just upgraded to a 6301 and have a Jabra BT250V headset. Previously I had a Nokia 6230i and by using the button on the headset I could make the phone give me the "Speak now" prompt to do voice dialing and end the call - all from the headset. With the new phone I can pair it but no control of the phone. Phone guide says press and hold right selection or down volume key to kick of the "Speak now". I'd like to control it from the headset. According to the Jabra website the BT250V is fully compatible with this phone.
Any ideas on settings on the phone to get this to work or a Bluetooth headset that does do this?
Thanks
Mart

There are chances that the headset is not fully compatible with the 6301 phone.
Though its shown on the Jabra website,have they tested it?
Compatibility must have yielded mixed results.
Incompatibility has been confirmed by test or other evidence. Initially, compatibility may have been considered possible.
Test has yielded critical failures. Incompatibility not confirmed yet (possibly: fixes/retesting expected)
Test has yielded critical failures. Incompatibility not confirmed yet (possibly: fixes/retesting expected)

Nokia N95 - reset after activating voice dialing

Similar Messages

Maybe you are looking for