Nokia N96 Navigationwheel turned on but NOT WORKIN...

Can somebody please help me with this anoying problem
I have no idea what "Breathing" means but when i go to the instructions menu and click on "Navigationwheel" the only question I get is Breathing on/off So yeah i turned it on ofcourse but when I rotate with my finger NOTHING HAPPENS!!
PLEASE HELP!!!
P.S. I watched a video at youtube it being preformed so i don't need no one to tell me that it isn't possible!!

28-Dec-2008 08:12 PM
riekz wrote:
P.S. I watched a video at youtube it being preformed so i don't need no one to tell me that it isn't possible!!
And we don't need anyone with that kind of attitude.
What you saw on YouTube must have been a pre-production prototype. The production version does not have a navi-wheel. The setting on the phone is for the breather (glowing light around the central button of the D-pad).
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • Nokia E71 multiscanner re-installed but not workin...

    HI
    I JUST FORMATTED MY NOKIA E71.
    AS YOU ALL KNOW , THE MULTI SCANNER DOES NOT SHOW UP AFTER A FORMAT.
    BUT WITH THE HELP OF GUYS ON THE NOKIA DISCUSSION BOARD, I FOUND A SITE TO RE INSTALL MY MULTISCANNER APPLICATION.
    IT WORKED LIKE A CHARM.
    BUT NOW.....
    EVERYTIME I USE IT ON A CARD... AND CLICK THE CAMERA... IT SAYS " READING CARD INFORMATION"
    AND THEN... BLANK... NOTHING.. IT READS NOTHING!!!
    PLEASE HELP!! 

    I have a similar problem with Multiscanner after installing Abby BCR on my N95. The test version of Abby stopped working after scanning a few businesscards and before the one day trial period was over with the message "no contact fields found". The problem is that the businesscard reader in Multiscanner also stopped working, I get the message "No layout blocks were recognized". The textscanner in Multiscanner still works fine, so suspect this problem is connected to Abby since both businesscard readers stopped working at the same time with similar messages. I've tried reinstalling the Nokia software on my phone and then reinstalling Multiscanner, but it still won't work. Does anyone have any suggestions on how to fix this?

  • My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

    hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat,  every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
    I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
    (i correctly got out of dfu mode after the downgrade)
    i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
    i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

    Anyone have any suggestions? or is everyone else just as clueless as me !

  • My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?

    My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?

    If these do not resolve the issue or if you are not comfortable with proceeding through these steps then take your Mac to an Apple store or an Apple Authorized Service Provider.  An Apple store will perform these initial steps, diagnose the problem, and give an estimate for repairs (if needed).  If the Mac is less than one year old or is covered by AppleCare any repairs would be free.
              Genius reservation http://www.apple.com/retail/geniusbar/ .
              or find an Apple Authorized Service Provider https://locate.apple.com/country

  • What does it mean if my location services are turned on, but not working?

    What does it mean if my location services are turned on, but not working?  It has always worked before.  It is turned on in Settings but when I try to use an app that requires location services, it says they are not on, and the little arrow is not appearing at the top of the screen.

    thank you...I tried this immediately after noticing but to no avail. I thought the phone died but I kept seeing the light on so I googled some things and it says it may be watered damaged and I'm not sure how.

  • HT201210 My iphone was updating to IOS6, then I thought by turning off my iphon it will cancel the update. It did, but now it keeps turning on but not compleely only until the apple sign shows up then turns off. Help please!

    My iphone was updating to IOS6 from IOS5, then I thought by turning off my iphone it will cancel the update. It did, but now it keeps turning on but not compleely only until the apple sign shows up then turns off. Help please!

    You will have to try putting it in DFU mode and allowing it to update. Once it has begun, you can't stop it.

  • How in Ipad 3.2 setup time go to sleep mode[turn off but not shut down]

    How in Ipad 3.2 setup time go to sleep mode[turn off but not shut down]?

    Go to Settings>General>Auto Lock - tap the arrow and then choose your time setting to put the iPad to sleep.

  • Nano (7th gen) voice over turned off but NOT

    I have done 3 things to turn-off Voice Over:
    1)  Settings>General>Accessibility>VoiceOver
    2)  Settings>Reset Settings
    3)  Itunes>Owner's Ipod>Summary>Configure Universal Access
    It is not like VoiceOver is turned on for either #1 or #3, so it is a mystery to me why it is turned on.
    In fact, it is almost like sometimes it is on and sometimes it is off, but it is on when I don't want it to be.
    It happens when I am watching videos (playlist) and not only does VoiceOver turn on but sometimes the
    videos just go haywire and go fast forward, reset back to 1st video on playlist even though I want to watch 5th video.
    Usually this happens maybe in conjunction with holding onto the Ipod, so I don't know if I am touching something
    on the Ipod that is setting it off. 
    I think it just sounds like I have it exchange...
    I even tried to find if there was a Voice Over Kit installed on my computer so I could uninstall it, but I couldn't find it...

    I have the same problem. For me it seems to happen because of my headphones causing the voice memo app to appear, even though they don't have a microphone. I only get the weird voice over, pausing, skipping etc. when the voice memo app is visible on the home screen. My earphones don't cause this problem but headphones do, neither have a microphone. Voice memo does not always appear when i plug in my headphones, but when i pause it for a while and come back, it's there. Must be a bug in the software, if only apple cared to fix it. I guess there's still no solution?

  • Nokia N96! Some buttons are not working!!!

    I have Nokia N96 SV 30.033. And I got this problem where , My Call button, my volume buttons, my up key , left key, menu button wont work.
    I dont know if theres some glitch of somekind. But sometimes it starts working normaly, but then again it goes off , and wont let me press anything.
    I tried reseting the phone with *#7370# and the 4 key combination ( * + 3 + Green Call button and power button).
    Any solution of fixing this ? ? ?

    Looks like it is some kinde of hardwarefault - lose connection or so. Visit a nokia care point! There are contact information on the top right on this site.

  • Accessing computers that are turned on but not logged in

    I have a network of about 60 win 7 Pro PCs, which are all on, but not always logged in. I would like to be able to access the shares on these machines at any time, but so far can only do so if the machine is logged in and active.
    In XP, all the machine had be was on. How do I do this for Win 7?
    Many thanks!

    Accessing remote shared folders is not in conflict with the fact that any users is logged (or not logged). For connectivity only one port is opened (445).
    You can do a research with network monitor to pinpoint what you need to open.
    Rgds
    Milos

  • Nokia C7-00: Can send, but not receive pictures

    Hello,
    I'm unable to receive picture messages on my C7-00 smart phone.  I can send pictures without problems but not receive.  Is it possible to disable receiving pictures?  If so how do I enable it? 
    Thank you.

    Its weird that you are able to send pics.. ( as picture message in ur C7 00) .. Update ur phone's software.
    And for picture message,to read, just touch on the attachment icon in the conversation,u ll b able to see.
    Do check ur multimedia message reception settings..
    For receiving through Bluetooth, check ur Bluetooth settings (visibility,pairing etc.. ) ,
    BTW, update ur phone's OS ..
    If you want to thank someone, just click on the BLUE STAR at the bottom of their post

  • Isync 2.2 and Nokia 6021 worked few times but not anymore

    I sucessfully synchronized my Nokia 6021 after uptdating to isync 2.2. It might be a coincidence, but, after the recent service downtimes with .mac, I can not get to sync my powerbook and my nokia anymore. here is what happens:
    1. start isync
    2. click sync
    3. the acqua bar show that the operation is progressing but, after 25% of bar lenght, the acqua bar does not move anymore.....
    4. on the other hand isync keeps counting thousands of contacts while I only have less than 100.
    The sync opeartion used to take seconds while now it keeps going and going until I have to stop it.
    Has anyone expereinced something like that?
    Anu feedback would be greatly appreciated.
    Thanks
    Pasquale
    PB G4 12", 1.5 GHZ, 512 MB   Mac OS X (10.4.4)   isync Version 2.2 (108.0), Nokia 6021 supported
    PB G4 12", 1.5 GHZ, 512 MB   Mac OS X (10.4.4)  

    Aur,
    Thank you for your reply.
    I tried to reset history several times with no luck. When I did reset history, I tried different options such as "merge..." or "erase device..." and I obtain the same result.
    Here is the status that I read just below the acqua bar while synching:
    "receiving changes from "Nokia 6021". contacts - 1534"
    1534 is the number that keeps growing....it starts from 1 and it keeps growing.
    This is really frustrating.
    Pasquale
    PB G4 12", 1.5 GHZ, 512 MB   Mac OS X (10.4.4)  

  • 30 GB iPod Turns on, but not working

    I need to HELP! My daughters videa iPod turns on (the backlight ONLY), but it does not show the apple logo or a menu. I have tried a soft reset (pressing the menu button and the top of the middle button at the same time)and it DOES NOT WORK! So it lights up/turns on, and that is it. Any recommendations?!

    Have you tried plugging it into the USB cable and the computer then doing the reset? I had an error like that and I could not reset the iPod until I had it connected to the computer.

  • The MacBook Pro turn on but not show anything on the screen.. Please help me

    I have a MacBook Pro15 2011 2.2 i7. The computer turns on and makes the chime and you can hear it and the fan runs but the problem is that it doesn't show anything on the screen and the apple logo doesn't turn on Also none of the ports works

    Try these 3 things
    SMC reset:
    http://support.apple.com/kb/HT3964
    Try a pram reset:
    Power off, power on, hold the following keys, option,comand,P,R (no commas) hold thes keys till you hear the start chime 2 times, the release. Reboot and see if you have anything
    The other thing you can try is a safe (be patient as this will take a little longer boot). power off, power on holding the shift key continue to hold the shift ket till you see the progess bar, then you can release the key, let it finish booting, and try doing some things on the machine. This will disable the 3rd party software so only native sftware will run. f all is well there is a problem with a3rd party application causing the issue. Try rebooting mormal, snd see if things have gotten better.
    If not take it to the Apple store and have it disgnosed, they do not charge for this, and will give a price of repair. Most of the time it is a flat rate, if there is no evidene of liquid damage they will repair what is broken for the same price. About 13rd the price of a replacement. If your machine is less than one fear old it should be covered by the warranty, if you have ApplECare you have 3 years from date purchase.
    All the best

  • Nokia browser, wechat, and data counter not workin...

    i have problem on my asha 305.. wechat not working and also with nokia browsing... i have already restore factory setting it many time but still the same problem.. what will be the best solution on this phone it is only 3 months old..

    With Nokia Browser not working you wil need to reinstall software via Nokia Suite or visit a Nokia Care Centre and get your phone flashed. It wil start working propery again. It might be a case of internal errors.

Maybe you are looking for