Nokia N96 slide problem
Recently i upgraded OS to new version i.e 30.033 sucessful
How just now i discovered that, when i m sliding the phone to down(which change the screen orientation to rectangular view) the screen view is not chaning to rectangular view.
Kindly assist
Regards
faisal
Hi ahmadsimza,
Welcome to Nokia Forum!
In addition to what AdrianHughes has said, you can check these settings to set the phone to receive the call upon sliding the slider:
Menu>Tools>Settings>General>Slide handling>Opening the slide>Answer incoming call
Hope this helps.
Similar Messages
-
What do I do when my Nokia n96 slide becomes loose...
I've only had this phone for about 2 weeks, and I've realised that the slide of my nokia n96 has become loose, I know it's something that has happened to most n95, but the n96 is obviously new. How do I fix it? It's under warranty, can I get it fixed free? It's annoying to hear the vibration and the creeks of it!
It depends on how loose it is. Most slider phones loosen up the more you use them.
All you can do is take it to a nokia care point and ask their opinion about it. They may say it's perfectly normal or they may be able to tighten it up under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
Nokia 6500 slide problem after updated to firmware...
Hi, I have recently updated my nokia 6500 slide with the latest firmware version 9.40. I realise that after the upgrade, my phone encounters problem reading the SD memory card. It happens intermittently, sometimes you see, sometimes you don't. Initially I thought it was due to my memory card but after replacing it with a new one, problem still occurs.
It looks like something on your system caused the updater to crash.
Unfortunately your only option for that model is to take it to a nokia care point for repair. Tere's nothing else that you can do for it.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
Hello
i have problem with my nokia n96, when i open nokia pc suite and go to software update show me 11.101 and only two applications are available: mail for exchange and nokia messaging. I do not see there download the software or something like that. Software is from 2008 i want to update this phone but i can't. I downloaded NSU but this can not install... Please HELP. I want in update polish language.
Solved!
Go to Solution.Is your phone locked to any Network ? Availability of update depends on region / Product Code and also for locked devices an approval from the Operator is needed. In any case it seems quite a long time that the phone has this version. You may ask your local Nokia Care whether they can help updating the Firmware to the latest version ...
-
Nokia 3600 slide Problem!
i have my nokia 3600 slide software update,after the update my phone restart, and ask to type the date and time. after that, the phone hangs.i reinstall the battery and do that step again.so i run again the software update after it fails the software update,the phone doesn't turn on..plz help me!
With the 3600 if you have already tried removing the battery and leaving it out for a few minutes, there isn't anything else you can try yourself. It is time to send it to the Nokia Care Point.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair. -
Nokia N96 Firmware Problem 30.101
Hi..
I am Updated My Firmeware From 20.0.xx Ver to 30.101 Via Pc suite Software Updater, But After Firme ware Update my Secondary Camera is not Working ( Unable to Make Viedo Call ) Shows " Unexpected error Occured. Power off the device and restart "
Attachments:
nokia-n96-smartphone.jpg 120 KB
Image Err.jpg 352 KBIs not what we saw in official page:sound not good as preview version,where is the photo in contacts standby,sound in video is minimal.Im scarred to use NSU because kill phones!
VALAHIANSS -
N96 was working fine until two weeks ago, hasnt been dropped or damaged so i can only think its the updat of software.
i have reset it and still i have the same problem.
If I slide open to answer calls or messages or use the menu's by opening it as if to use the media player (ie slide down) it works fine. If I slide up i get a blank screen and it takes absolutely ages to get the menu n screen
When a call comes in screen goes blank except for a few lines (top middle)
really annoying - any help or ideas greatly appreciated.jjayp wrote:
Oh great, is it a well documented problem ? or just after updating with the new software release?
i take it a reformat won't help then?
I don't think this happened after the firmware updation. I think that it's hardware problem, so you will have to take your phone to a Nokia care point.
If you want to thank someone, just click on the blue star at the bottom of their post -
Hello
First, I know N96 is an old phone, but I wanted it so bad, and i got one few months ago. I bough it with 20.050 firmware in it, and when i went check for updates (OTA) it said, and it always says no updates available. I checked the code behind the battery and its: 0543719, checked on the site says there is newer version firmware for my phone available. I tried updating with Nokia Software Updater, again latest version, but it shows error saying it can't identify my device. A friend of mine told me he updates via Ovi suite. I installed it and tried to update. It detected my phone, firmware and everything, it downloaded the latest firmware, but when i go to install, it shows that my usb is disconnected, and then connected again.. (http://www.youtube.com/watch?v=zy8EZd0uBYc)
Is there any way i can update to the latest firmware? Can my phone die or get stuck on the oldest firmware if i do recovery? thanks.There are 3 ways to update the firmware for the N96 and they are
1. OTA (over the air) which is the preferred method.
2. Ovi Suite/Nokia Software Updater
3. Nokia Care Point.
There is always a risk of bricking the phone if the update fails. This will then definitely require a trip to the local Nokia Care Point.
Sometimes when I encounter problems with the updating process, I actually hard reset the phone using the *#7370# reset code before I update. This could rid the phone of any settings etc that may be causing the problem.
Remember to backup your phone before attempting anything.
Good luck. -
when I try to setup the clokc on my n96 phone, it gives me system error!
I have tried to reset the phone but I don't know the lock code. I didn't setup one initialy when I have started it, and I don't know the default one.
any idea why my be the lock code or what might be the clock problem?There is clearly a software bug in the Clock App on the N96 Nokia (it doesn't matter which rev of the firmware you have). Nokia support won't give you a straight answer (most are NOT tech's, they're only telephone support staff using a fault-procedures list).
Once you get the 'System Error!" on the clock app it won't go away with either the soft reset or the so-called hard reset (which isn't a hard reset by the way). Other 'clock' apps work (calendar etc), but these don't set time (as ant_coe_ has said).
The issue seems to be related to the comms with the carrier - if, when you first set up your zone, the phone contacts the carrier to link up - the s/w must be setting a zone value that it irrational - say '-99999' once that's happened the app is f****.
So you need to reset the phone and get a *working* timezone, then all is well, clock stays working...
The important steps which do work are:-
1. do a soft reset (*#7370#) or the power reset (Star Green 3)
2. after the reset - at the first prompted to state your location (local timezone region).
The clock app then works and yo ucan set date and time. -
Hey
Today my E75 fall me down the stairs and now the slider doesnt goes so smooth as before. The Silder also goes a little bit more back as it should so the slider doesnt really matches with the display part anymore. Is there any possibility to fix this or to remove the slider?
Thank you for your help!!!It is difficult to advice on something like this without being able to touch and feel. Best advice I can give is to send the phone to your local Nokia Care Point.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair. -
My 6500 slide keeps changing the theme and ringtone by itself. I changed the micro sd card recently could this somehow be the problem?
Any help appreciated.The reason for this as I learnt last week is a small switch which is operated by placing the back cover on the phone. Its a 'safety' feature apparently. If you have a picture or ringtone set from the memoery card relese the back. (you will notice it reverts everything back to factory settings. Now do the same but make sure the tone and pic that you use is stored to the phone memory not your card.....presto!! it stays on and dosent revert. People around the globe think its a software bug when actually its not. It prevents you losing data from your memory card. I am currently trying to find out if this feature can be disabled. Its stupid, I know!!!!!
-
Hello, I need answer to one problem. My nokia N 96 says that phone memory is full. How I can delete some files from phone memory? I have in download folder 18 MB some files but I cant access to this folder. Please help me
Make sure your photos and emails are stored on the Mass memory, make the storage location to mass memory in the camera settings, clear web browser cache go to Web > clear privacy data >cache, install applications on to the mass memory .
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks. -
Nokia n96 video problems.Need help please
how do i go about putting videos on through pc suite but everytime i try, it starts converting and stops quatre way there.
i tryed using another media converter all together now don't know what format or resolution the videos have to be converted to in order to work on my phone. the videos i have been trying to convert are .avi format.
does anyone have any advice that can help me?PC suite is the wrong tool for this job as it's not very good at handling large files.
A great source of information on how to make videos compatible with the N96 is available on this blog:
http://portablevideo.blogspot.com/
Look through the archives on there and you will find a very good guide on what programs to use and the required settings.
If your avi files are divx or xvid you may want to install the programs below to see if you can play them without conversion. The program on the first link is free, the second is not but a demo may be available.
http://labs.divx.com/system/files/private/DivXPlayer_S60_3rd_0.sisx
www.lonelycatgames.com/?app=smartmovie
Message Edited by psychomania on 20-Jan-2009 09:02 AM -
Hi,
Can anyone help,
I cant make calls from my contact list, only if i enter the number manualy and press the green button to ring,
It did work off my call ist but not any more,
Any one know why
thanksIs your phone locked to any Network ? Availability of update depends on region / Product Code and also for locked devices an approval from the Operator is needed. In any case it seems quite a long time that the phone has this version. You may ask your local Nokia Care whether they can help updating the Firmware to the latest version ...
-
Hi, I recently update my phone software and I can't put the language who was before. My phone language was romanian and now I can't put this language again. Please help me.
ThanksRefuses the phone to change to romanian or do you simply miss the language now after you've updated?
If the language is gone it's a case where the reseller you bought it from has added the language themselvs to the phone as it wasn't initially ment for your country ( they buy it cheaper from other countries). So when you now have updated, the phone has been updated with fw initially ment for your device, hence romanian added by the reseller is gone. You will have to visit a Nokia care point and ask if they can install the language pack which you need.
If romanian is one of the choices in your lanugage selection but nothing happens when you select it, I would first pull out the battery from the device and wait 1 min before putting it back together. I would then boot it normally. Check again, if not, try to reinstall the update. If that does not work, try a hard reset. Beware that a hard reset will wipe the phone memory so I would make a back up of everything you need first before doing that. If it still doesn't want to execute your selection, please visit a Nokia care point.
Good luck!
Maybe you are looking for
-
Action to: Print current document to PDF Printer "As Image" with Specified DPI
I FREQUENTLY do the following task on documents. I would LOVE to have an action that did it for me. Can someone help me create one or point me to someone who can? Version: Adobe Acrobat X Pro. Windows 7 64-bit With current PDF file open: 2) Print
-
RFC Destination SAPFTPA is not working
Hi, I am able to connect FTP via RFC Destination SAPFTP which is for front end but RFC Destination SAPFTPA for background run is not able to connect with FTP location. I have checked the trace with program RSFTP005 and it looks okay. However, when I
-
Dodge and Burn Tool basicly stopped working.
For some reason the Dodge and Burn Tool in Lightrooom 5.4 basicly stopped working. It will only make a slight adjustment no matter how much I change the exposure value. Does anyone know what could be causing this?
-
I have just got a new laptop and want to install Photoshop CS3 on it, however it wont letme Activate the product until the copy I have on my old machine is deactivated. The problem is I cant deactivate the old copy as the Deactivate optionis not visi
-
Regarding encryption on oracle 9i
Hi, I am unable to encrypt the value from the below block. DECLARE input_string VARCHAR2(100) := 'date=' || to_char(sysdate,'YYYYMMDD') ||'&'||'userid=' ||'ppacobqi^^^^ldbs`lrm'; raw_input RAW(128) := UTL_RAW.CAST_TO_RAW(input_string); key_string VAR