Nokia N97: Contact name not displayed when they ca...

Anyone know how to fix this problem.

This problem is ALWAYS caused by multiple entries, as Fender says, you have the same number with several names so phone doesn't know who is calling and just shows number, or you also need to check memory in use in contacts, if you are using more than one source ie phone memory and sim, you will also get conflict. Check your contacts and set phone contacts in use to only one source ! Just phone memory or just sim. There are many posts on this subject, just use user search, it's always the same solution 
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • Contact names not displaying in messages

    On my N9 while in messages (sms) my contacts names are not showing up for some people randomly.  It just diplays the number, but it does show the correct contact picture and when i go into the message thread it does show the contact name there.  Anyone else experience this issue and know of a fix?  I've tried adjusting the way the phone number i stored in my phone but it does not appear to help.  I am on pr 1.1

    I have the same. I see that new message come, I see only number. But after some time correct name is shown.
    More probematic thing is that contact is not showing when someone calls me. I see that someone is calling, there is only number shown, I answer, (still no contact name) i talk few seconds and then i look at phone i see that contact is shown. Why it takes so long for my phone to recognize contact?
    I don't need to say how annoying this is, I must recognize all my friends by voice. 

  • Contact name not displaying for texts/messages, only phone number does

    When I turn on my iPhone 6 (iOS 8.0.2) in the morning (I shut it off at night), any received text messages (iMessages or standard texts) only show the phone number of the person who sent the text and the standard tone for texts is heard, when it should display the name and play the special text tone I setup on specific contact records.  It is not til after I use the Touch ID or enter my passcode that the name of the contact who sent the text displays AND the special text tone for that contact is heard.  This not normal behavior.  Even upon startup on my former iPhone (5), any texts received displayed the contact name and played the appropriate tone when the phone was turned on during the morning.  HELP!  I believe this is a bug; but, would like to have this confirmed.  If it's a setting or combination of settings that I'm missing in iOS 8.0.2, please let me know. 
    My contacts have never been stored in iCloud nor do I plan to use iCloud.
    Thanks!

    Try this: when device is ON remove the battery, wait a minute and turn the battery back to the device.

  • Contact Names Not Displaying for My Conversations ...

    Hi Contact Names are Not Displaying for My Conversations in C7.
    I took C7 in April 2011.Suddenly today (July 26th 2011).Names are not displaying and also my mobile became very slow when accessing ..
    Please tell me what to do

    You are welcome. Please resolved the thread?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Contacts' name not appearing when called locally while travelling !!!

    iPhone 3G 3.0
    When called locally abroad during travel the contact name does not appear. I have stored all my numbers in Int'l format.
    Is there a fix / tool to sort out this issue?

    I used to experience this. What I do now is store multiple versions of the same number, with and without the country codes. Mostly I use the country code version to dial out, while the phone uses the non-country code version to ID in-coming calls.
    For example, Contact "Buddy #238" may have two phone numbers, even though he really has just the one:
    78 (555) 123-1234, and
    (555) 123-1234
    I'd use the first to call out, but the in-coming calls may tend to show up as the second. Coming to think of it, which of the two number formats does your caller ID display when your friends call? Does any of this seem applicable at all? If you notice a different format for in-coming calls, just add that number to the existing contact(s).

  • Contacts are not appearing when they are imported after wipe!!! HELP!

    I have a Z1 running 4.4 and so far this is the most annoying bug ever!
    This has happened after I tried to do a full wipe on SUS!
    It seems that after I import my contacts from my sd card, everything is okay. However, I use an HD Contact app which often requires me to wipe my contacts list a few time just to refresh the photos.
    When this wipe happens, my contacts do not anymore appear on my list even though the system says "Contacts added/imported"
    My list remains blank except for the "Emergency Number" and "Myself" entries.
    My god!
    I have tried to run it on Safe Mode, hard restart, reboot, force stop the Contacts app yet nothing seems to work!
    The only solution is a full wipe again and again.
    This has never happened before the 4.4 update or when I tried to reinstall 4.4 via SUS.
    Is anybody having the same dilemma? I could really use some help

    Hi, 
    Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • Contact Name not appearing when I get an incoming ...

    Hi,
    Yet more problems with the N97 - I've noticed over the past 3 days that when I check my call logs it says that I have rang random number(s) (no name appears) so I text the number saying "Hi who's this?" and it turned out to be a mate and my girlfriend lol!
    I don't understand why it's doing this? The only thing I've done recently - is receive a song via bluetooth from my girlfriends 5800 which failed a number of times!!! (then eventually I got the song through, opened the inbox and the message went to save the song crashed when trying to save it to a memory location)... and it's saved to my phone memory (I only have 1.1Mb of free space left now... (aside from the mass memory of course ) - I don't know how to rectify this problem although I haven't tried connecting the phone to the PC (PC Suite) and couldn't find the file in the file manager...
    What could this be? My dad phoned me about 10 mins ago and it came up with no name...?
    I've managed to sort the internet problem with the phone sort of... is this something else the latest update has fooked up?
    Thanks
    Ash

    The ringtone issue is well known on the N97, it's down to a bug in the current and previous firmwares.  It's apparently fixed in the new 2.0 firmware due for release from this weekend if the rumours are to be believed.  The other problem here is that regardless of the ringtone you have specified, it'll randomly play the default Nokia tune.
    Regarding the contacts problem, check if you have any contact details stored on the phone SIM.  Anything there with the same number as a contact as in your other storage memories needs sorting.  The same is also true if, for example, you have separate entries for people, say one for 'Mum' and one for 'Dad' as they have different mobile phone numbers, they'll shame the same 'Home' number so when that 'home' number calls you, it won't show as Mum or Dad on the display as calling, it'll just show the number if it's not network blocked.
    I hope that helps explain it.  Duplicates are a problem.  Nothing major, just annoying.
    Message Edited by matt_t on 09-Oct-2009 09:37 AM
    Nokia N8 on O2-UK
    Firmware 022.014

  • CONTACT NAMES NOT DISPLAYING & TIME FORMAT CHANGING AFTER SYNC

    i live in kuwait and i was just gifted an officially unlocked 3g iphone from new zealand. i upgraded to 2.1. i have 2 problems
    1. i have synced my contacts from address book. the format that it is stored in is +965XXXXXX. 965 is the country code for kuwait and all numbers in kuwait are of 7 digits. there is no area code as this is a small country. when someone calls me their name does not appear. only the number appears
    2. i have set the time format on the iphone to the 24 hour format but every time i sync with my macbook the time format changes to 12 hour format.

    Follow this procedure to get your contacts back (I assume they are on your Mac/PC):
    1. Go to Settings, then Mail, Contacts, Calendars
    2. Select your account which has the contacts you wish to sync
    3. Turn syncing for Contacts to "Off". This will bring up a box telling you your iPhone is turning off Contacts. My iPhone actually hung at this stage, so after several minutes, I performed a hard restart (holding down Home and power buttons for 5 sec.)
    4. Exit from Settings
    5. Go to Settings, then Mail, Contacts, Calendars
    6. Select your account which has the contacts you wish to sync
    7. Turn syncing for Contacts to "On". This should restore your contacts
    8. Go to Contacts to verify. They initially may not appear or just show up as numbers for a second or two, but then your contacts should appear.

  • Contact names not displaying

    hi,
         in my nokia c2-03, when ever a call or a message comes it shows the number of the caller or the sender instead of showing his/her name as i had saved those contacts. i had saved my contacts from sim memory to cell memory, but still this problem exists......somebody please tell me how should i rectify this...

    You are welcome. Please resolved the thread?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Contact names not displaying during calls, but only in logs

    Many names in the address book not showing up
    Hence, when i get a call or make one, the name doesnt come up with the number
    after the call, the number with the name is visible in call log as outgoing or incoming or missed
    in the database details it shows my address book having 238 numbers (these are the numbers currently visible)
    so how is it that the names are visible in the log and not in the address book and also not visible during a call
    Please help
    (a search for this topic hasnt got me the correct results)

    Same thing happened with mine! Still haven't figured it out, but **bleep** it's annoying!

  • Some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name.  But when they respond to my text, is shows up as a new text message with there name.  How do I fix this?

    When I create a text message from my contact on my iphone 5, the contacts mobile number appears and not there name.  But when they respond to my text, is shows up as a new text message with there name.  How do I fix this?

    Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
    If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears.

  • Nokia PC Suite Installation - names not displayed ...

    Senders' names were not displayed when i installed in vista.
    However, it was ok when i installed in another pc running xp.
    advice appreciated.
    thanks.

    my model is E51.

  • Hi.. I got some problem  when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

    Hi.. I got some problem  when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

    Hello:
    I am not being critical, but you seem to want Safari to behave exactly like Chrome.  Every software developer has a plan.  Sometimes features in one product parallel other products - sometime not.  There might be some things available that would help you.  Do not hold your breath, however, for suggestions from people who use these forums.  Most of us use (and like) Apple products.  If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
    Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
    I use Safari (and have for years).  I use Firefox (not a bad product) as my alternate browser.
    Sorry for what appears to be a pedantic lecture.  However, I think most of us adapt to different products if we really want to use them.
    Barry
    Message was edited by: Barry Hemphill

  • Contact names not showing in messages, only number

    nokia 6121  no names will show when ringing or recieving texts so I dont know who they are from etc, very frustrating, how do I change it to show the contact name not number? I cant find any settings to help me? thanks

    Hi, In such case, try to check the things below:
    1> Make sure all contacts are stored in unique memory : sim or phone memory (recommend phone memory)
    2> Try to avoid 1 contacts has few numbers and other case, similar or same names for fews contacts
    3> Add your country code into the normal number format, eg: 0123455678 --> saved as +60 12345678 (+60 is the country code for MY)
    4> Check the settings under Contacts folder: Contacts > Settings > Contact view or Display contacts > try to change Last name/ First name view option one by one

Maybe you are looking for

  • How do I know if my apps will work under Yosemite?

    Hey guys, I'm running Yosemite right now on a mid-2011 Mac Mini that was originally running Lion. I then installed Mavericks on top of Lion(I didn't try Mountain Lion) and then I installed Yosemite on top of Mavericks. I'm planning on erasing the 500

  • Disk Drive not working

    I have an old G4, which although is not my main computer, I still use. The issue is the disk drive doesnt work. I can insert a disk fine, but it never makes the whirring sound of a disk being loaded and no disk ever pops up on the screen. I am hoping

  • RESOURCE_NAME : cmtcallbk

    Hi all and happy new year! Could someone tell me that is the RESOURCE_NAME cmtcallbk in v$resource_limit. I have the following value: RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU cmtcallbk 4294966174 4294967295 6600 UNLIMIT

  • Working on the library in excel

    Hi I want to open the library in excel (well actually open office Calc). I want to have the "trackname for sorting" colum beeing automatically generated like this "trackname for sorting"="Trackname"+"albumtitle" I then want to use the modified data i

  • Trigger to execute query when value from LOV is selected

    HI Guys, I have a form in which I have 2 fields in Master and 4 fields in detail, all showing on the same canvas. I have put an 'execute_query' in when_new_form_instance trigger so that when I open the form it is pre - populated. The Master fields dr