Nokia N97mini Firmware update problems

As I understood there are more than one firware update version:
Version 12.0.110 v4.0 and version 12.0.110 v4.01
How is possible to make the update, if phone autoamatically downloads from network provider wrong version?
Nokia 1611, 2210, 3110, 5110, 6210, 6310, 6310i (up to these models totally satisfied)
Then don't remember model, then E50 (mostly happy), then N97 mini - phone with briliant keyboard, but poor touchscreen, then business phone E07, phone that can not make a photo of contract, invoice or business card. poor design of usb port and 5 months at service did it - my nowadays phone is Apple. Company gave me Asha 300, so frustrating, that I use my old E50 instead...

Right, im back again
Ive been sat here thinking about how the phone works, long story short ive managed to fix the problem by trial and error, i still feel the phone is drawing too much power for some functions to work properley so ive deactivated my keypad tones and BOOM! no more reseting, ive also changed the profile i use as it seemed that the general sound profile caused the resetting, so if your haveing the same problems, as soon as you can press your Power button do so, then change to the silent profile so you can customise a 2nd profile that has the custom settings you desire.
IF this works for you and you had the same issue with the 06.10 software on the nokia 6280 on the 3 network, please let me know, lol.
Thanks again for your time, ill keep this thread up to date if any more issues crop up.

Similar Messages

  • Nokia N82 firmware update problem

    Hi,
    I have soft formatted my N82 using *#7370#. And then when I am trying to update the firmware usign Nokia Software Updater, the software popping an error saying "Microsoft Visual C++ Library error : R6002 Floating Point support not loaded" and then application is getting terminated.
    Initially before formatting it was proceeding to update the firmware however after the soft format its not!
    Can anyone please help me out !!!!

    Hi!
    I have just updated my 5300 with the new software and I have the same problem, you can't change the font colour! First thing I noticed.
    Also, half my contacts have disappeared - everything after J. I tryed restoring them from a backup but the backup fails.

  • Nokia 5800 Firmware Update Problem

    Hey, My nokia phone has the V50.0.005 Firmware but i read that v52.0.007 is the newest, when i try to update the phone the OVI Suite and the Nokia Update won't find the new one and say that i already have the newst, why is that and how can i solve this problem?
    Solved!
    Go to Solution.

    I can not update my nokia 5800 xm code: 0575581 to the new firmware 52.0.002
    Please help me.

  • Nokia E65 Firmware Updating Problems.

    Hey guys I have a Nokia E65 (RM-208).
    Whenever I try and run the Nokia Software Updater it is never able to find an update. Even though I know there are updates available.
    When I press *#0000# it says 1.0633.03.00
    28-09-06
    RM-208
    Nokia.
    Does anyone know an alternative way to download and install this firmware on my phone? I really need to update the firmware because this phone is very buggy.
    Thanks in advance.

    Anyone???

  • Nokia 6270 FirmWare update problem

    Hi all
    When Im trying to update firmware on my Nokia 6270 it says that this phone is not supported.
    There is v. 3.53 of firmware in my Nokia now.
    What can I do to update my phone firmware for a new version?
    Sorry for my English

    Hi iluha
    Unfortunately there have been a number of similar postings concerning updating 6270 via NSU. Presumably taking it to a Nokia Service Centre is not an option open to you?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia N81 firmware update problem!!!

    i cant seem to update my nokia n81 everytime i go into nokia software updater and it searches for phones connected to my computer is says it cant find any even though my phone is connected to the computer according to PC suite i have vista 64bit if that changes anythin all my phones settings are normal

    Hi there,
    have you tried with NSeries PC suite verion 1.6
    coz its a N-series Nokia phone.
    Try 1st and see how

  • Nokia 5610 firmware update....................

    im having a little problem with my nokia 5610 firmware update.
    The problem is that after updating my phone with version 8.30 the slide animation feature of my phone is not working. On slide open\close the picture set in the theme is supposed to appear but nothing appears.
    Before the update this feature was working perfectly fine. i reported about this issue to nokia customer care also but they just advised me to wait for the next firmware i.e. v9.40 . As the new firmware released on my product code i again updated my phone's firmware and this time with version 9.40. Still it did not help me. The same problem persists . Please note here that nothing went wrong during the update . All other features of my phone are working perfectly fine .
    Can anyone please help me on this issue??????

    Hi there,
    The version 10.00 for the Nokia 5610 has been around since early July, so certainly it would be available for all countries in the APAC region.
    Just make sure the phone is fully charged and backed up and you're set to update.
    Cheers and Good Luck
    Message Edited by nj15 on 11-Oct-2009 03:26 PM

  • Firmware update problem solved after Win XP SP3 -upd

    I'm one of the numerous victims of ZEN firmware updating problem. At the start I had Win XP SP2 and WMP. My player is ZEN Micro 5gb and after trying to update firmware it had firmware problem and stayed in the recovery mode. Firmware updater and ZEN Media Explorer couldn't recognize the player. So that's how I got it work again:
    1. Rolled back WMP to WMP9, updated it to WMP0.
    2. Removed ZEN Media Explorer and Jukebox driver (all Creative stuff) from Add/Remove programs in Control Panel.
    It didn't solve the problem. I also tried my player with couple of other computers, but it didn't help either.
    3. Installed Win XP SP3 -update.
    4. Reinstalled driver for ZEN Micro in Control Panel.
    5. Ran the firmware updater and this time it did recognize the player.
    (6. Updated WMP back to version and the player's still working.)
    Hope this will help you too.

    I can start the upgrading process, but at around 95% it stops, and says "firmware upgrade failed." I didn't uninstall WMP though, because I have Vista, and I hae no idea how to do it. I can only get my computer to recognize my 6G Zen when I go into recovery mode and choose 'reload firmware' then I connect it to the computer and I can start trying to upgrade it. If I dont go into recovery mode, its just a blank screen, the computer doesnt recognize it, and I can't even turn it off without reseting.
    ?I've tried so much, now when I try to upgrade, it loads a little bit and jumos to the end quckly and says "firmware upgrade fails" and nothing works. Do I have to try to do all the things you listed to fix this?

  • Xcode and firmware update problem

    Hi all,
    i've been working on my app for a few month now and i have about two more weeks until i finally submit it. everything went very good during development.. untill -
    by ACCIDENT i've upgraded my firmware to 3.1.2
    since my OS is 10.5.7, as i understand, i must install xcode 3.2.1. but this version also needs mac OS 10.6
    so it's realy frustrating for me...
    do i need now to upgrade/purchase OS 10.6 and also my xcode environment in order to continue working ?
    can't i make a rollback to other firmware version supported by my current 3.1.2 xcode ?
    i've searched the net endlessly and just couldn't find anyway to downgrade my firmware (i have a 5.11.7 baseband and 6.2 bootloader)
    please...
    any help ?

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • Zen 8G This device cannot start code 10 and firmware update problem

    I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
    I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
    If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • NOKIA n80 firmware update version v5.0725.0.1 APAC

    buddy i update my nokia n80 firmware from v5.0719.0.2 to v5.0725.0.1 APAC
    guys the new firmware has small fonts it is not good.further iam looking for other changes in log
    any news regarding EMEA version.hope nokia corrects this problem
    Solved!
    Go to Solution.

    buddy they have improved the bluetooth. its nice.
    LT font router is also not working so u have to remain with small font but psiloc font magnifier works

  • Nokia 9300 firmware update???

    Is there any firmware update available for my Nokia 9300 v 4.53 (00)22-12-2004 RAE-6???

    Hi mukeshinsaan,
    Thank you for your post. You can check if there is any new software for your device by downloading and using Nokia suite which you can download from the link below and then select the link under the Nokia Suites for your PC section:
    http://europe.nokia.com/support/product-support/no​kia-9300/pc-software
    Once you have downloaded this if you go to tools and then click software update or you can click the quick link  (Its a green arrow icon) and then click refresh. This will then check if any new updates are available.
    Regards
    Raoul_Duke
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Firmware update problem for N73

    i have big problem with nokia software updater. Nokia pc suite is working fine, but nokia sw updater can't see my phone? Why???
    I forget to inform you that my phone is nokia N73, firmware is V4.0726.2.0.1, and i'm from Romania!

    go to control panel.....add or remove programs....then on nokia connectivity calbe driver clik repair

  • 10.6.8 Macbook Pro firmware update problem

    I installed a couple of updates for my MBP 10.6.8.  One was Safari, the other was brand new, released within the last week, I think it was a firmware update, and now the machine will not boot into OSX.  I have a Bootcamp Windows 7 partition that starts fine.  But if I let it boot, or select the Mac partition, it shows the apple logo, then a little progress bar below it that gets to maybe 5-10%, then starts over, then the computer powers down.
    I have tried clearing the flash by holding option+command+P+S.  Didnt work.
    Is there a way I can boot to a command prompt and clear this update out or something?  Or anyway to fix this myself?  From the Windows partition maybe?

    So...fixed my issue and it was not related to the updates, it was just coincidence.
    What I finally did was take a video of the startup screen and was able to see that what was happening was fsck was failing, and then the system just halted.  This info presumably makes it to dmesg, but not to system.log (huge oversight IMO).  So its not easily discerned.
    Once I figured that out I googled around and this guy's page helped me fix the problem:
    http://blog.jbheren.com/post/2011/02/09/repair-hfs-volume-on-osx
    Specifically I had to boot into single user (command+S at the startup sound)
    and issue:
    fsck_hfs -ypr /dev/rdisk0s2
    Then I did
    reboot
    and here we are

  • Nokia n8 firmware update

    hello just want to no what happen to the firmware update that was suppose to lunch jan 24 keep checking on my phone and its no available

    I have used Nokia Software updater with GPRS/ EDGE Connection, and it showed me the update. I'm from India.
    My current release after the update is PR1.2. Software Version is 014.002.C03.01. Type is RM 596.
    ==============================
    My Story: Used 6670, Used N91, Used N8, Using Pureview 808 now. I requested Nokia to get N91's sound quality and features in the latest phones. No response from Nokia!

Maybe you are looking for