Nokia PC Suite - Connecting on PC via USB

Sorry, I habe a problem with the Connecting from my Mobilphone Nokia 3110 over USB-Cabel.
There come`s a answer on Step 3/4 from the Sofware (PC-Suite) I must deaktiving my Securitybarricade.
Silly Question: What means that ? ...but it`s new for me!!!
On my old PC I haven`t this Problem...!! It was ok!

When you open Nokia PC Suite.. do you get 'Click here to connect a Phone' ? Connect the phone.. click on that tab and follow instructions .. See if your phone gets connected now ...
Attachments:
PC Suite.JPG ‏36 KB

Similar Messages

  • Connecting my 6630 via USB

    O/S - Win XP SP 2
    Phone - 6630
    PC Suite - 6.81.13
    Hi
    I'm trying to connect my 6630 via USB, i've installed and re installed PC suite but even though Windows recognises my phone, and installs the drivers etc. the Get Connected dialog on PC Suite shows as connecting but there is no response. What might be the problem and what should I do?
    YK

    What is the response you are waiting for ? What areyou trying to do with the PC Suite and how ?

  • Connecting 6720 Classic via USB crash PC USB devic...

    When connecting 6720 Classic via USB cable to my Acer laptop all USB ports on laptop seize to work and Windows display a message that the USB device has malfunctioned. Eventually the PC is permanently stucked and only way to proceed is reset laptop on power button and prior to that remove the laptop charger to entirely power it off and let it reboot on battery. Harddisk controller is permanently indicating with a green light but harddisk is not spinning. When this happens the Nokia phone does not prompt for USB usage (connection type) and is also hanging in application execution for a while. I would like to be able to configure the phone not to charge via USB, but have not found a way to do that. I believe that the charging via USB is creating a low level hw driver and power surge problem in my laptop. Problem is not consistent but happens from time to time. When connecting the normal 230 VAC charger to Nokia device so the Nokia device is charging when connecting to laptop via USB the problem does not occur. In this situation the Nokia device will not try to charge from USB connection.
    Any possibility to disable the charging over USB on the Nokia 6720 Classic device??

    I had the same problem with my 6720 when I connected it to my HP laptop via USB to download maps. It crashed my computer making all USB ports unusable until I restarted the computer again. I think it happened after I downloaded the necessary software upgrade. I had to eventually use bluetooth to transfer maps data to my phone. It worked without any hitches. Can someone at Nokia fix this problem with the USB?

  • Connecting MIDI controller via USB

    Does anyone know how to connect a Roland SH-201 to a MacBook Pro via USB to use as a midi controller in Logic Express 8. I've installed the SH-201 driver, however I am getting a warning saying it is not compatible with an Intel based Macbook.
    Just some general guidance in connecting a keyboard via USB to work within Logic Express 8 would be good.
    Thanks.

    Well, if the synth's USB driver is not compatible with your laptop's system, there is nothing you can do about it I'm afraid. There is always an option to get a portable USB to MIDI Interface (price would be around $20-50, I think) and connect your synth to Macbook Pro through it.

  • While restoring iphone 4 8gb it is stuck at the connect to itunes via usb screen

    While restoring iphone 4 8gb it is stuck at the connect to itunes via usb screen

    Hi tanuj178,
    If you had an issue while restoring your iPhone and are now seeing an icon instructing you to connect to iTunes, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • Is it possible to connect two Macs via USB ?

    Is it possible to connect two Macs via USB just like Firewire back in the day via Target mode or is there something similar? I am asking this because about 2-3 years ago I would normally image Macs via Target Mode. I used to have a regular Macbook running 10.6 along with a customized-ready-to-go .dmg image saved on the Desktop. Whenever I needed to put that image into any Mac I would simply connect the two Macs via Firewire, I would then press "T" at startup which will get me in Target Mode, I would then see the disk appear in the desktop of the Mac I had the image. I would then copy that image to the T mode macbook using super duper. Can this still be done through USB with new models and if so will I also need to press T at startup ?

    No, USB connection does not qualify for this, only firewire and thunderbolt, as I read (but cannot test, for the time being I have only one such mac around).
    This is why the short series of alu MBs (2008) are not qualified for target mode either.
    p.s. What ‘new models’ do you refer to?

  • HT1386 During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect

    During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
    Please how do i reactivate iPhone?

    Hello DadiPrince,
    The following article contains information beneficial to getting your iPhone back into normal working order.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Resolution
    Perform the following steps if you receive one of the messages above:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
    All the best,
    Allen

  • What is the difference between connecting a printer via USB or Ethernet ?

    What is the difference between connecting a printer via USB or Ethernet ?

    When a Printer with an Ethernet connector is connected via Ethernet, it becomes a peer device on your Network. It is available whenever it is on for all users on your Network.
    When connected via USB, it relies on your computer to "Share" it onto the local Network. It is only available when the attached computer is on. It takes resources from that computer to facilitate printing for any User.

  • Nokia 3230 unable to connect to internet via USB c...

    when i use CA-53 cable to connect to internet using nokia pc suite7.0.8.2 (one touch access) an error message pops up "unable to connect to the speified device make sure the modem is configured properly" but i can easily connect to internet via bluetooth   other functions like file manager , contacts , messages and back up can be accessed by using the CA-53 cable

    I called a vw dealership (in South Australia) today because I have an iphone5 and a Tiguan and experienced the same thing (after i had purchased the lightening/30pin adapter).
    I was advised that the media interface software is not compatible with iphone5.  VW will eventually update the software according to ol'mate at the dealership, but it will be at an expense to the consumer allegedly.
    I know that there is a iphone/vw media cable one can purchase from VW however, I believe this to only work with iphone4 or older?
    Maybe try an older generation ipod to use for the car if all ur music is in itunes?
    if anyone can correct me, I'd be more than happy to know... going to try my older generation ipad and see if there is any truth to the tale.... eventually.  Until then i'll stream via bluetooth :-)
    Sheree

  • Nokia 130: Cannot connect to PC with USB cable

    I recently bought a Nokia 130 and tried to connect it to my PC via USB cable, but the phone only displayed "Charging" instead of a menu to choose "Data Storage". Why was that? I felt like I was cheated.

    Good day, Rino130. Are you still having the same issue? If so, let us isolate your concern by using another USB cable. You can also try connecting your phone to another computer to check if there's any difference and then let us know the outcome. BTW, welcome to our community. 

  • Nokia 3500c does not enter synchronization via USB

    Hello,
    I've bought a new 3500 Classic Yesterday, and tried to synchronize it using PC Sync. The phone functions normally, with the exception of the following problem:
    The phone is recognized as a USB device (see below for details), but fails with the following symptom: the "Nokia PC Sync" icon at the taskbar is grayed; a "Nokia 3500c" appears in the "Phone Selector" dialog, but is grayed; a "Nokia 3500c" appears as attached in Nokia PC Suite, however any attempt to synchronize content fails with "Refreshing Contacts Failed".
    Other functionality on the USB interface appears to be working properly: I was able to copy files from my computer to the memory card in the "Data Storage" USB connection mode (as set from the phone); Windows also recognized the "USB Modem", and I was able for instance to "Query Modem" and get meaningful replies.
    The same symptoms occured at 3 diferent computers, one of which is Windows XP 64-bit, and two are XP 32 bit.
    Phone firmware version: 3500c V.07.21
    PC Connectivity Solution:
    Version 8.47.6.0
    [Nokia Connectivity Cable Driver:]
    Version 7.1.8.0
    Operating system:
    Microsoft Windows XP 64-bit Edition, Service Pack 2
    Language: English
    Language for non-Unicode programs: עברית
    Detected Internet browsers:
    - Microsoft Internet Explorer 7.0
    - Mozilla Firefox 3.0 (Default browser)
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.2.3790, Build: 3959)
    This is quite a show-stopper for me; if I'm not able to find a solution, I'd have to exchange the phone - probably for a different model - so I'd be quite grateful for any help.

    d same problem on my nokia 3500c...
    vodaphone india
    same software version
    same operating sys and tryed in winvist and win7 
    tryed nokia software updater and ther i pressed reinstall d same v7.21 software version
    but still did't work......(bad nokia)
    then i took it to nokia care and they took 2 days and told there is some problem in an IC and it vl cost  Rs650
    but no guaranty that it vl work.. chanc's is 50%
    (d phone is not worth Rs2000 would u spent almost Rs1000 on it and keep such low end phone for a life time..?? ..!)
    then got is flashed not once but 3 time but still did't work
    then i got it flashed with v6.18 and it still did't work
    then updated it to v7.12 throo nokia software updater.
    this is a very bad and sub standerd phone by nokia ... as they r doing if now a days..
    buit i dont know y they want to spoil their brand name , brand image whic they hav made if from such hard work and not in jst 2 or 4 years but from decades...
    i kindly request nokia pepole to d same old robast phone whic NOKIA vs known for... each phone no matter it a basic or high end it used to hav d same good Basic quality,industrial standerds ,good testing ,accurate production procuderes,quality of basic and high end components including PCB to d small lock of d panal....
     Plz bring back d "People'S NOKIA".. whic used to belive in "NOKIA CONNECTING PEOPLE" 
    at last i found a solution for this ... As i wont let nokia down evenif it want to get Down
    Solution:
    use OXYGEN PHONE MANAGER 2.18 
    avalable in oxygen phone manager website..
    3500c is a S40 platform.. so chose  OXYGEN PHONE MANAGER 2.18  for non symbian phones
    u can browse d site for details for which phone models it supports.. as on this day its d latest.. use ur brains and find a crack for it as its trial version.... Or else use ur credit card....!!
    Whic ever u think is smart....!!! ha ha ha 

  • Nokia PC suite with E52 hangs on USB or Bluetooth ...

    Nokia PC Suite 7.1.40.6
    Windows Vista Home Premium SP 2
    I have problem when ever I send multiple SMS via PC Suite. I have tried turning off the Bluetooth and PC Suite and try to reconnect. It's does not connect.
    I have to restart PC before it works again. Appreciate your advice

    I am about to leave Nokia after 10 years of layle customer. There is not way for me to contioue using my phone while I am not able to sync my data with the phone due to the same error using the same HP laptop. Any assistance will be gratitute

  • HP Deskjet 2540 - connect to pc via USB, can I print from android tablet as well?

    Hi,
    I've just bought a HP Deskjet 2540 all in one printer.
    I have set it up via USB connection to my windows 7 pc, and it is printing fine.
    I also have an android tablet.  Can I also print from this whilst using the printer via USB on my pc.
    Any help on if this is possible and what steps I need to do if it is would be appreciated (I have been reaeding the help section on the website but I am just getting more confused).
     Lesley

    Hi @Lesley54R,
    You don’t need to have the printer listed with the two different connections unless you’ll be switching back and forth from being connected by USB cable and wireless.  You can delete the one you don't think you'll be using.
    To print the web page, please use the browser found within the app. I’ve included the ePrint Mobile App FAQs document for your reference.
    In addition I’ve also included the ePrint Product Specifications document. This document has the list of supported email programs, file types and print limitations.
    Hope this helps!
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Job stops (HP DJ 3550 connected to AEX via USB)

    Hi everybody,
    Here is the setup:
    1- PB G4 15" w/ MacOS X 10.4.2 uptodate w/ Airport Extreme card installed
    2- Airport Express base (firmware 6.2) setted using Airport Admin Utility 4.2:
    - Home router
    - WAN: ADSL modem connected using PPPoE
    - USB: HP DeskJet 3550 (recognized by system)
    - Network managed by DHCP & NAT
    - No Port Mapping, no Access Control, no WDS, no Music
    3- HP DeskJet 3550 connected via USB to AEX
    4- Printer added to PB using Printer Setup Utility V4.1 (157.2):
    - hp deskjet 3500, connected through Bonjour
    - Driver HP Inkjet 2.7.1
    From whatsoever application I print, it starts the job in the printer queue then stops (msg Jobs stopped).
    I included the console file for the experts...
    I tried reset, driver, update... you name it, it still doesn't work.
    It works using the USB and a Airport Extreme Base Station.
    I know that this printer is not in the compatibility list, but it really works with my AEBS!!
    Any help would be very appreciated as I am completly clueless...
    Thank you in advance... Pascal

    Hi Chris, thank you for the update and the trick.
    I have also some (good) news on my side.
    I tried the same as you did (restarting/reseting the AEX several times) and, effectively, the printer worked... until it stopped again a few prints after.
    So I went with the hard way (no, it is not throwing the AEX by the window).
    I installed the HPIJS and declared the printer as a network component with an IP address (like if it has a JetDirect). Now the problem is definitly fixed.
    Here are the steps:
    (see also page http://www.ifelix.co.uk/tech/1300.html)
    go to page http://www.linuxprinting.org/macosx/hpijs/ and download both softwares:
         - hpijs-foomatic-2.0.2.ppc.dmg
         - espgs-7.07.1.ppc.dmg
    Install them.
    Go to Printer Setup Utility
    Add a new printer
    Select IP Printer
    Select Protocol HP Jet Direct - Socket
    Enter address: 10.0.1.2 (or the address of your AEX)
    Queue: leave blank
    Name: HP DeskJet 3550 - HPIJS (or the name you want)
    Location: Airport Express Base (or the location you want)
    Print using: HP
    Select model: HP DeskJet 3550C HPIJS (or your model)
    Set the printer as default if necessary

  • Centro can no longer connect to PC via USB

    I bouhght a new PC recently and since then I can not get my Centro to connect to the computer via USB.  Ive installed the software and driver and it still says no driver detected whenever I plug it in. Its also popping in and out of the device manger screen like its keeps getting unplugged andplugged back in . Ive tried both the cd driver and downloadable one.
    Im running Win7 now, but was using Vista64 Home Prem when I first got the computer..
    I never had any problem on my old cpompuer which was running Vista32 Home prem
    Post relates to: Centro (Verizon)

    Hello JalenTigh, Welcome to the Palm Support Community.
    Unfortunately, Palm Desktop software has never had a driver for any 64-bit operating system.  This has been true for XP64, Vista64, and now Windows 7 64bit.
    If I could direct your attention to the Windows HotSync section of this forum you will find many large threads discussing your issue at the top of the section.
    You will only be able to sync via a Wireless connection - on your Centro, this would be via BlueTooth.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for