Nokia please release the firmware for 5320 xm 5.16...

its has been ages since since my nokia 5320 xm got the update
last update was 4.13
nokia please hear my request

Updates are influenced by regional and network factors. Are you aware if other 5320s in your country have a newer update? Is your phone an 'Operator variant' which would mean that Nokia needs approval of your network to release updates?
Message Edited by mccbleue on 28-Sep-2009 09:39 AM

Similar Messages

Please release the Skype for Nokia 701

I bought the Nokia 701 for Skype vedio calling but I found that Skype is not supporting the Nokia 701. when you going to support Skype? I am wainting for Skype Nokia 701.

Skype is now available for all Belle Smartphones.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Please release an update for the n8 keyboard!!

could you please release an update for the keyboard on the nokia n8 becuase the cureent keyboars is difficult to type in potrait mode as the keys are not well spaced.

I think it depends what means "update" in your opinion and in their opinion.
I read recently that the keyboard on N808 has been downgraded in one aspect, in that now there are no more left/right arrow keys. I hope this will not happen to N8. Not long ago I was very happy to observe that it is easier to correct a mistyped URL in the address bar on my N8 (also native browser, but specially on Opera Mobile) than it is on my wife's iPad, which is way bigger – and this just because on the iPad there is no way (or I found none) to precisely step the cursor in the required position on address bar, other than touching several times with my finger in a hope to finally place the cursor where intended.
Personally I can type relatively well on my N8 in portrait mode (and things are somewhat worse for me, because I'm using a localized keyboard, with additional virtual keys on it), but I presume it depends on each person finger constitution. Perhaps the Swype model is easier for you to use ? (I mean just using as normal keyboard)
Other than this, I am curious about the N8 screen resolution when it comes to touch control surface. Are there inherent hardware limitations on it ? How many elements are in the grid ? How possible is for a keyboard software to detect adjacent keys touch on this particular device ?
Cristi

HT4623 When it will be released the Firmware 6.1.4 for Iphone4s ?

When it will be released the Firmware 6.1.4 for Iphone4s ?

There probably never will be a release of that version for other iPhones since 6.1.4 is to address a specific issue with the iPhone 5. Whether there will be a general 6.1.5 release (or some other number ) and if so when that will appear is something none of us here will know or can say.
Regards.

When trying to create connection using Contribute 6.5, get error message "Unknown error. Please see the log for detail." The log says "Network connection timed out." What do I do now?

Have been using Contribute 6.5, and earlier versions, for years with Hostway without any problems. All of a sudden I cannot create a connection to our website. Tried to chat with Adobe a twice now and got no help. Yesterday they started a chat with me, then ended the session without any communication! My problem has been going on for several weeks now. I uninstalled Contribute, downloaded and installed again, but it did not help. Hostway had me connect with Zilla and everything worked fine. So, they say the problem is with Adobe. The last attempt ended with "Unknown error. Please see the log for detail." The log says "Network operation timed out." Does anyone have any suggestions?

Hi There,
Can you please try using any other Internet connection outside your company's network and see if it is working? Alternatively, Can you please try the below settings from the Advanced... Menu while creating the connection using FTP details and try to create the connection again:
Regards,
Mayank

Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..

Entered apasscode and forgot what it is. and now it says iphone disabled connect to itunes.. and when i connect it to itunes it tells me please enter the passcode for your iphone and connect it to itunes.. I dont know what to do now..

iOS: Forgot passcode or device disabled - Apple Support

Please see the log for more details.... where to find the log???

Hi everyone,
I have a WebI document in our DEV environment that I am trying to transport to PROD.
When I try I get the message:
Commit Status=Commit attempted and failed., Promotion Status=Failure : Object has failed to promote. Please see the log for more details
But where do I find this log that has more detail?
As background, the document in PROD is corrupt and I want to replace it with the working copy from DEV. Perhaps the fact that the PROD document is banjaxed is the issue but I don't know.
Many thanks
Gill

Hi Arvind,
We are going live to live on the promotion side of things.
Test promotion tells me everything is OK :-(
I appreciate your workaround solution, I would like to understand full what's happening and put a more permanent solution in place.
With regards
Gill

Ive just subscribed online but realised I have the wrong service by mistake... I require Convert PDF into Word doc service but selected Adobe send in error, sorry. Can you please switch the service for me? Thanks Anthony Levy

Ive just subscribed online but realised I have the wrong service by mistake... I require Convert PDF into Word doc service but selected Adobe send in error, sorry. Can you please switch the service for me? Thanks Anthony Levy

Hi Tony,
Please refer this KB document : Return, cancel, or exchange an Adobe order
Please let me know if you need any further assistance.
Regards,
Rahul

Cannot preview filetype please download the file for viewing and garbled text on a downloaded image

Dear Madam or Sir,
When I click on a file titled "Subject Access Request Letter re Account Number 12527629 Sort Code 60-10-34 24022015.pdf", which is stored in my Account on Acrobat.com I get the response "Cannot preview filetype please download the file for viewing". This file was created from an OpenOffice .odt document of the same title. Please advise.
I downloaded an image, which purports to be a .pdf, from the Royal Mail Track & Trace web facility using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its similarity to text. Please advise.
Regards,
Ron Platt
PS I have tried to attach both files (.pdf) but am advised "That image type is forbidden". Please advise.

Hi Laura,
I have found the solution to be:
   1. Not to upload to "Document Cloud" from the .pdf stored on my PC and
   open on screen.
   2. To login to Acrobat.com from the .pdf stored on my PC and open on
   screen, select "Document Cloud" and the sub-folder required and then upload
   the file
I have a feeling that there is a glitch somewhere, because after I have
opened a number of .pdf files stored on my PC, and irrespective of whether
I have closed them prior to opening the next .pdf file or left them open,
Acrobat Reader will display (Not responding) in the window title bar. The
"number of files" equates to less than 10. I, then, click on the X at the
right of the window title bar and I am given the option of "Close the
program" or "Wait until the program responds" (or words to that effect). If
i choose the latter, nothing happens and I am back at the unhappy status
quo. If I choose the former, I am told that Windows is searching for a
solution, which it never finds. I, then, have to shut down the PC and then
start it up, again. Clicking "Restart" does not solve the problem.
I have described the above before and received the usual "it cannot be
Acrobat, it is perfect" response. I could, I suppose, screenshot/snip every
sequential screen but why should I have to when I have described the
sequence as fully as I can. So I have found a "workaround" that does not
solve the "Not responding" problem but does solve the problem of not being
able to upload from the open .pdf file to the sub-folder in "Document
Cloud". I am, on occasion, working through the myriad of .pdf files that
are in the root folder of "Document Cloud" and putting them in the correct
sub-folder(s).
I have today read that Google is starting a cellphone service in the USA in
which a monthly "access" rental (US$20) is paid plus a GB capacity usage is
elected for at a rate specified, e.g. US$10.00/GB. If the subscriber does
not use the elected GB capacity Google refunds the US$value of the unused
elected GB capacity.
Suggestion: Adobe applies that kind of policy to its online software
package usage rates, e.g. I elect to subscribe to a particular level of
online software package usage monthly, but, if I do not use all of the
programs included in that online software usage package, I am credited back
for not having used the softwares, that I did not use, that were inclusive
in that online software package offer.
Regards,
Ron

My phone is miss please check the imei for me thanks

my phone is miss please check the ime for me thanks.

Apple does not track phones.
Contact law enforcement if you believe the device has been stolen.
If it is merely lost, start looking for it.
If the "Find My iPhone" feature had been enabled prior to to losing the device, it would be trackable via www.icloud.com

Can someone please post the password for the following HP Mini 110

Customer brought in laptop and did remember the bios password.
We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode. Can someone please post the password for the following HP Mini 110.
Halt code = CNU937BF2X
thanks Andy Mountain Computers Inc.

Hi,
Try:
e9lofxp874
e9lofxp87r

Please post the password for the following HP Mini 110

Customer brought in laptop and did remember the bios password.
We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode.     Can someone please post the password for the following HP Mini 110.
    Halt code = CNU937BF2X
     thanks Andy Mountain Computers Inc.

Try
e9lofxp874
or
e9lofxp87r
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Can you please update the link for the flash player standalone installer?

Can you please update the link for the flash player standalone installer?
Link: http://fpdownload.macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_plugin_debug_3 2bit.exe
Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller
Source: http://forums.adobe.com/thread/889580

Dogs Key wrote:
Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller
That is an old document (Flash Player 10.3) that shouldn't be there anymore. (The English document redirects to the link below.)
The download links for the offline installers for FP 11.2 are here http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins tall_in_a_firewall_proxy_server_environment
I have updated the download links for FP 10.3 in http://forums.adobe.com/thread/889580

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

HT4972 please send the steps for update ios 4 to tos 6 in iphone 4

please send the steps for update ios 4 to ios 6 in apple iphone 4

iOS 6 is no longer available. You can only upgrade to 7.0.4.

Nokia please release the firmware for 5320 xm 5.16...

Similar Messages

Maybe you are looking for