Nokia PT-6 Remote Camera

Could someone from Nokia tell me why this product is no longer being supported but still advertised and sold worldwide.
1) Nokia have not bothered to rewrite the phone software for Symbian Series 3 software so it cannot be used on their latest phones.
2) They have now also pulled the remote cam software from their site and I can no longer download the software to my phone.
3) the software download directly from the Remote Camera to the phone displays a security error after the latest firmware update on my old N70 and refuses to install.
CAN NOKIA PLEASE ADDRESS THESE ISSUES - THERE ARE STILL PEOPLE THAT USE THIS COOL CAMERA FOR SECURITY PURPOSES

You have to re-write your own versions of the Software or buy
the old 60 series phone to use as a Master Controller Phone
Master Controller phone are listed as
(3650,3660,6600,6170,6630,6670,7610,6680)
They make the PT6 send to your N90 as only way.
Nokia Links (all terminated)
Support Settings http://www.nokia.com/nokia/0,4879,67029,00.html
Support http://www.nokia.com/nokia/0,4879,67029,00.html
Userguide http://www.nokia.com/nokia/0,8764,67030,00.html
I downloaded 2005 from the Nokia Website.
as I used them I renamed them as needed.
Nokia_Remote_Camera_Manager_EURO3.sis
Nokia_Remote_Camera_Manager_EURO2.sis
Nokia_Remote_Camera_Manager_EURO1.sis
This one I Download Nokia RemoteCamera Configurator here (28/08/2005)
Support Software http://www.nokia.com/nokia/0,,67031,00.html
need the SW?
Nokia_Remote_Camera_PC_Configurator_en_ud.exe
Version 1.50, updated 27-Apr-2005
driver for the cable:
Nokia_PT6_USB_Cable_Driver_154.msi
Cable_Driver_for_Nokia_Remote_Camera_PT-6.zip
instruction manual
Nokia_Remote_Camera_UG_en.pdf
EDIT : Unverified Information and E-mail Address RemovedMessage Edited by sapere_aude on 29-Oct-2007 08:54 AM
The contradiction is not that free software are among the best, its that commercial software arent the best of them.

Similar Messages

  • Nokia 6303c Problem with camera, says camera on st...

    nokia 6303c Problem with camera, says camera on standby solution, any body got any solutions
    many thanks in advance

    try to free up some of your phones memory delete unwanted files ,delete text ,images etc or move to memo card
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Remote Camera Control and astrophotography for Sony A7(X) and Sony A6000

    Hello, Sony makes the best sensors, no doubt about it. Sony makes the best hybryd cameras, that's why i bought a Sony camera BUT ... Astrophotographers are deeply looking at Sony 's camera (especially A7S) because of their astrophotography capabilities but there is a HUGE problem : no software allow BULB mode command, which is very important for astrophotographers. Most of time, astrophotography is some thing like that : 30 pictures, 5 minutes exposure for each picture and we have to add dark frames, flat frames, offset frames and so on. So, if Sony makes a software like Remote Camera Control, why does Sony not include long exposure (over 30s) control in this software ? So come on Mr Sony, don't let Canon leading astrophotographers. Please, add long exposure in your softwares !! Many thanks considering my demand.

    I'm going to add that this should be available for ANY alpha series camera that has a bulb mode function in manual control.   This includes ,for example, the a5100.

  • Remote camera

    Someone can help me ?
    Everytime I turn on my toshiba from sleep I have  a window poping up from remote camera and blue tooth camera searching for a camera .
    I have tried to dowload the software for my camera canon witch didn't work and now I am stuck with this window .It's anoying .How could I get rid of it ?
    thank you

    You should be able to disable it using MSCONFIG.
    Once it's disabled you might want to uninstall it
    using add/remove programs. You can use
    CCleaner to remove the registry entry that
    might be left on the system.

  • Remote Camera Trigger

    I spoke with some Adobe LR staff in Las Vegas at Photoshop World, and inquired about a remote camera trigger for LR. I posted frequently during the LR Beta for this very option.
    Phase One makes C1-Pro, the digital download and viewing software mandated by every art director I know. Lightroom is an exceptional package and years ahead of C1-Pro. But Light Room cannot trigger a tethered digital camera release. I have been told by Adobe staff that one of the problems is the huge number of release profiles that would be necessary, BUT LR 2 already has the majority of these camera profiles in the setup.
    If Adobe could add this function, I believe that C1-Pro would have to fold its tent.

    > BUT LR 2 already has the majority of these camera profiles in the setup.
    You are confusing the "Camera Color Profile" with the hardware communications protocol which will vary based on the OS and the camera maker. I should be noted that Camera Raw/Lightroom supports over 180 cameras with the raw files and color profiles. If you compare and contrast that with the numbers of cameras and manufactures that Phase One supports, you'll see that Capture 1 supports a small subset of total cameras out there.
    As it relates to camera communications and control of the camera through Lightroom, that's a very different proposition than merely supporting the raw files. Each OS has different protocols and each camera maker does as well. To expect Lightroom to be able to control all of the functions of the camera (and if not all functions, what subset of functions would be a minimal subset?) becomes are very substantial engineering effort.
    As it stands now, Lightroom already can work with the camera makers control software and auto-import from wherever the camera maker's software writes the file. This process relies upon the camera makers' control software and reduces Lightroom's area of responsibilities...you would have to make a far stronger use case that Lightroom should duplicate the work the camera makers' software is already doing. Otherwise, the use case that "it would be nice" isn't a strong enough argument.
    Phase One's Capture 1 started life off as a camera control software for the Phase One camera backs...so they are already a camera controller. However, using their software to control non-Phase backs or cameras is very limited. As far as I know, you only get the ability to "click the shutter" which for me is not nearly enough. Using Canon's utility for example, I can set F stop, shutter speed, ISO and click the shutter. Merely clicking the shutter from within Lightroom would be a big step down in functionality if that's all Lightroom could do.
    >If Adobe could add this function, I believe that C1-Pro would have to fold its tent.
    Having Phase One fold it's "tent" is not really a goal of Lightroom. Phase One sells really great camera backs and regardless of what Lightroom may or may not do, Phase one's business will probably continue as long as people are buying Phase One backs. It's really not Adobe's nor Lightroom's goal to drive Phase One out of the biz...

  • How to solve this problem, pls help when I try to see remote camera system from home."Dual streaming is required for HTML viewing"

    How to solve this problem, pls help when, I try to see remote camera system(spec dvr) from home. The Error I get is "Dual streaming is required for HTML viewing"

    I had the same probelm and found that the problem lies with 64bit programs such as safari and microsoft internet explorer. I have resolved the issue on my PC based server by using a 32 bit ie and same on my mac by using the same running windows under parallels.
    So far the problem with the 64 bit side of it is still to be resolved.
    Hope this helps and gets you guys up and running until suchtime a 64 bit solution is found.
    Craig

  • Can I use iSight as a remote camera?

    I'd like to use iSight as a remote camera and record the video to a miniDV camera in a safer location.
    I don't have a nearby Applestore to go check this idea out, does anyone know if it's possible? I have a powered FW hub, so I can power the iSight w/o a computer (I think)

     You're welcome, Mark. Have you driven an iSight from a Dazzle before, or do you know someone who has?No.
    Although I have no technical data to quote that proves this, based on reports posted in Apple Discussions, I believe that iSight is less protected against shock, vibration, dust, and humidity than my "walking-around" cameras.
    I use a camcorder or the movie setting on my digital still camera for recording movie clips when I will be moving the camera. I do not mean to imply that iSight is inordinately delicate, merely that it is not as shock resistant as cameras designed to be carried. I would be surprised if iSight would withstand the rigors of aerobatics.
    Based on what you want to do, iSight's seemingly modest shock tolerance, and the price of GL2s, I would look for a device more like the sports camcorder mentioned earlier.
    Perhaps others can offer some first-hand experience that will be relevant to what you want to do.
    Jim

  • Airport extreme (UFO) used for bridge for remote camera system.

    Where do I start! This could be a whole page of frustrated user set up of my APE.
    Anyhow, after several hours of trying to get it to work, I'l give a quick summary of what I'm trying to accomplish.
    What I Have : Airport extreme (square) base station running B/G specs (universal for all my computers)
    Airport extreme ( UFO ), trying to use as a remote bridge for my video surveillance system in my basement.
    What I want to do : Make the APE UFO talk to the APE square to send signal from my remote camera system to my APE square in my office.
    Seems like it should be simple enough, however, I'm beyond myself at this point in trying to make it work. Maybe my settings are wrong on one, or even both of the APE's.
    Port forwarding? Could I be missing a important step here?
    Any thoughts, or step by step walk through would be very much appreciated.
    AJ

    A.J. Jones wrote:
    What I want to do : Make the APE UFO talk to the APE square to send signal from my remote camera system to my APE square in my office.
    You'll need to create a "static WDS" arrangement. To do that, you'll first need to note the MAC addresses ("AirPort IDs") of each station. Launch AirPort Utility, enter "manual setup" mode for the square APE, then hold down an "option" key while you pull down the "Wireless Mode" list under the AirPort/Wireless panel. Pick the choice to "Participate in a WDS network". Fill in the details, declaring the square APE to be the "WDS Main" and the AirPort ID of the UFO station in the WDS Remote" list. Save the configuration. Now use AirPort Utility on the "UFO" APE. (You may need to connect to it with an Ethernet cable to see it.) Set the "Wireless Mode" the same, declaring the base station as a remote station. Be sure to use identical values for network name, wireless security method, network password, band, and channel on both stations.

  • Nokia Lumia 900 Front camera issues

    Hi Moderator,
    I bought the new Nokia Lumia 900 few days back and today for the first time when I tried using the front camera on one of my video calls it just froze. Thinking that it is software(skype, tango) problem I tried to open regular camera but the front camera wouldnt come up. I called At&t technical support he advised me to switch off the phone, remove sim, re-insert the sim and turn it on. It worked(thought I still dont understand the realtion between sim and camera). But after some time the camera again hung up on me. This time I switched my phone off for 5 minutes and then turned it on it worked. And I cannot do the whole process again and again all day. Is that a known issue or defect in my phone. 

    I also have a new Lumia 900 with skype installed.     I am finding that the experience on wifi is still not as smooth as  Facetime on an iPhone.   I am also finding that after I use it a second time (my call hung up in the middle), suddenly my front camera will not work correctly anymore.  It is showing the image as though it has some kind of a filter applied and there does not appear to be a way to turn or reset this filter.  Switching to the front view worked fine.  Audio continued to work fine and my phone did not lock up, other then possibly internet delays.  I got the front camera to work again by powering down.   I think there might still be software issues.

  • Nokia strips out speed camera warnings from the Ma...

    On both my 808s I have just realised the audio warnings have stopped totally.
    There was a recent maps update. I did an update check and it said that the whole lot (3GB in my case) needed updating, so I did it. That was probably a bad idea, because it looks like the camera warning function has been deleted.
    A google digs out this
    http://www.allaboutsymbian.com/flow/item/18004_European_speed_cams_deliberate.php
    The fix does work! I can see the cameras as POIs in the Drive app.
    The Maps app shows none of them, which is probably as intended as it doesn't offer speed cameras in the list of POIs to enable/disable, either.
    This means that Nokia will not be updating the camera database, ever again. That's a pity - that was a huge part of the functionality of my phone, and I am sure many others (that drive a car a lot) will agree.
    Presumably Nokia will be doing the same crude hack on their WP phones. What they don't realise is that the Maps functionality is a huge selling point for Nokia, without which a Nokia phone has very few attractions to the average user, over say an Iphone.

    Just stick to the speed limit.
    If everybody had done this there would never have been any speed cameras in the first place.
    History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
    Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!

  • Remote camera question

    Not sure how to do this of if it can be done.
    I'd like to be able to use a remote wireless camera paired with either my iBookG4 or PBookG4 and be able to access the camera's lens from a remote location online. In other words, if I have the remote targeting a certain area of my home while I'm not there, can I use my other laptop for viewing???
    Mucho thanks,
    Carolyn

    Yes, presuming that the camera either can connect directly to a network or that it's connected to a computer with appropriate webcam-type software.
    You might find this CNET article helpful.
    Cheers.

  • Nokia E5-00 Issue- Camera takes pictures of less r...

    Hi, on my Nokia E5-00 I am experiencing when I take a photo it is whitish and ugly comparing to the quality in the standby mode of the camera. Does anyone know what do I need to do in order to fix this? Thanks!

    yup its ok..  u jst   chnge the settings of ur cam..  make  pic  quality  high..  n  others acc to  ur  indoor or  outdoor,..,it  takes  a  second..  thn its  shown  * while  u  click  pic  press the capture button  fr  long time  till it flashes  twice  u  cn chek..  the result,,,

  • Nokia Lumia 1020 - Pro Cam switching to Panorama

    Nokia Pro Cam used to have a circle with 2 arrows at the bottom right of the screen to switch to Panorama or Smart  Cam.  And there was the camera button and video button on the right middle of the screen.  Now, there are 3 buttons on the right middle - the camera, video, and smart cam.  And no way to find Panorama.  Any idea what happened and how I can get the button to switch between modes back.

    hi mate, the arrow is no longer there but you can tap on the three dots and then tap on Lenses to get to the Panorama app.

  • Nokia c-7 secondary camera issue

    my nokia c 7-00 is about a month old, my secondary camera is not working, whenever i try to switch it on it says "unexpected error occured. restart phone." even after restarting the phone several times problem didnt got fixed. i also restored factory setting but still the error persists. i am unable to make video calls. kindly sugest a solution. (my phone details: PR1.2 software version 014.002)

    Try reinstallation of firmware via Ovi Suite.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Need for Nokia 808 reinstall stock camera.

    I install the app  'camerapro for N8 and 808' and set as default camera. But the stock apps show blank black screen while still can take photo. I'm unsure whats going on. I turn off Camerapro apps as default, but the problem still presist. I tried reboot the first 2 times it still the same. Until I tried for more than 5~10 times finally get it to work but very unstable. Sometimes the stock camera run to standby mode when I already press the hangup red button to close the apps. Once I take a photo and go to gallery and try to go back to camera mode it sometimes shows a camera screen yet no option to change setting at all or even blank screen when press on the shutter yet can take photo.
    I need to reinstall the stock camera apps and hope it will fix the problem that the camerapro cause to my nokia 808 stock camera.

    Have similar issue to yourself upon 808 re-furbished to latest 113.010.1508 software. Whilst stock camera application icon worked about two times after firmware installed it no longer does, however although Camera Pro installed it is not chose as default but in Stock > "Preferences" I have selected "Capture when phone locked" so I can launch stock camera at anytime by pressing shutter release if this makes sense.
    I thought that maybe this error was restricted to my device as since Belle FP2 I always get a "System error" screen on booting which disappears upon clicking OK but I can find no other adverse side effects upon device.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for