Nokia Pure View 808 Headset compatibility issues

Hi,
I recently bought a headset from Philips (Citiscape Downtown SHL 5605BK to be exact) which says on it's box that it is compatible with all Nokia phones as a headset. However when I connect it to my Pure View 808 it says that it is not supported. What should I do? How can I make my phone support my headset?
The specs of the headset are as listed:
Frequency range: 18-22000 Hz
Sensitivity: 102dB
Impedance: 32 Ohm
Driver: 40mm

@Aunvre
Got a suspicion that Philips (http://www.philips-shop.co.uk/store/catalog/headphones/headband/downtown-on-ear-brown/productdetail/... mean that their headset compatible with newer Nokia Lumia devices wired to AHJ standard rather than Nokia 3.5 mm TRRS (stereo-plus-mic) sockets. You may need to use adaptor such as this http://www.meelec.com/MEElectronic_TRRS_Adapter_for_P_Version_Headphones_p/adptr-trrs-35.htm
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Headset Compatibility issue

I just bought the Sennheiser M2 IEG headset wich says should work on Sony smartphones
but when i got them yesterday and tried them the middlebutton for answering calls etc. wont work it just raises the volume instead.
Is it so that Sony use some kind of other standard in the headphone jack?

Hey,
I have the same issue but with "sennheiser cx 5.00g". Same thing, middle button just raises the volume... Sennheiser says it's supported by Sony smartphones?
http://sv-se.sennheiser.com/earphones-mic-cx-5_00
Is there a solution?

PLS HELP!Nokia 7370 HS-31 Headset problem! SOS!!!S...

Hi!
Today I'm buyed a new and original HS-31 phone headset, but when I connect this headset to my Nokia 7370 phone, the headset is very in undertones to run. I'm barely hear anything (radio or a call).
What's the problem????
Please HELP me!!!
It's very exigent for me!!!
Thank you!
Moderator Note: E-mail removed
Message Edited by kenken on 18-Aug-2008 01:28 PM

Hi Bungaroosh,
You have presented with certainly an unique situation. I suspect that first of all, the reason the website you rely on opens on your friend's Samsung is that a lot of websites out there have updated their support for more current web development standards....which for some older browsers accessing their websites can cause compatibility/rendering issues. I suspect that the company will want to cater for as many of their customers, and the number of users using severly outdated browsers numbers in the minority.
Firmware updates for the older DCT-4 phones such as your 6230i were only able to be performed via Nokia Care points. I enquried about updating my 7710 a while or so ago, and got the rather flat answer that my device was so old that they no longer had the equipment to update it. I suspect it would be the same in your case.
Not too sure that the HS-10 headset would be compatible with any of the newer Nokia's. There are a number of cheap Nokia newer headsets out there that would work with many of today's newer phones.
I understand your need for a phone that just does phone calls and texts, and the occasional train line check. I would recommend a phone such as the Nokia 110, but since it is using WAP 1.1, am unsure as to how much support it would have with today's websites. A safer bet is to use an Asha phone such as the 202, 203, 300, that has support for the newer websites. These you can get on the cheap these days anyway. And they will all pretty much play MP3's.
The 6230i is a seven year old phone, be proud that you extracted that much usage out of it . There are many newer options out there these days, and maybe there's a bit of a learning curve, but keep your mind open....you could be very pleasantly surprised by the features you gain and enjoy!
Hope this helps.

Compatability issues with Windows 7

I have been trying to print out some event tickets from an email attachment and am being told that there is a compatability issues between that latest Adobe acrobat and Windows 7. I have been directed to this website for solutions.

Hi,
Are you Adobe Acrobat or Adobe Acrobat Reader to view the tickets?
Did you try saving the attachments to your desktop and initiating a print?
Thanks

Adobe Flash IDE: Migration/Compatibility issues between Adobe Flash Professional CS3 and CS5

Hi,
Adobe Flash IDE: Adobe Flash CS3 Professional and Adobe Flash Professional CS5
I am facing some migration/compatibility issues between Adobe Flash CS3 Professional and Adobe Flash Professional CS5:
I am working on a project that has been completely developed in CS3 earlier. When I am using CS5 (Flash Player 9 / Flash Player 10) to compile the FLA files, it is creating some new issues like some customized radio buttons are getting disappeared while viewing the SWF on a web page etc.
So, I would like to know:
1) Is there any migration/compatibility issue between Adobe Flash CS3 Professional and Adobe Flash Professional CS5?
2) If yes: Is there any patch available from Adobe for it?
3) If no: What could be the causes and the best possible solutions for it?
Any help and support would be highly appreciated. Many thanks in advance!
Thanks & Regards
Amit

Apparently some people have issues, but I don't think it is across the board. Here's a link to another recent posting that may or may not prove helpful to you...
http://forums.adobe.com/thread/776615?tstart=60

Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

I have called HP-Support and the answer was:
«Thank you for contacting HP Active Chat Support.
This is in continuation to our response with regards to your chat ID: 63381567
As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
Start the computer.
Press the F10 key to enter the BIOS setup.
Select Restore Defaults .
Under Load Defaults , select Yes .
Choose Save Changes and Exit .
Under Save Changes and Exit , choose Yes .
If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
Open Control Panel .
Expand View by: and select Large Icons .
Click Administrative Tools .
Double-click Services .
Double-click Telephony .
Under the General tab, expand Startup Type , then select Automatic .
Click Apply , click Start , then click OK .
Restart the system.
If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
The issue was not resolved.
So I'm waiting for the release of the new driver...

Compatibility issues between CS5.5 & new macs?

Hello all. Does anyone know if there are compatibility issues between Audition CS5.5 and new macs? Just got a 2013 MacBook Pro (OS X 10.9) and haven't been able to install my copy of CS5..5, which I've been using on an older mac for years. I've tried both the original installation disc and a download.
Thanks!
-- Tony

Depends entirely on the application. You should probably visit the
individual product forums for details.
I will tell you this. For InDesign you're not going to be happy at all.
Bob
CBH_admin <mailto:[email protected]>
Monday, January 7, 2013 3:16 PM
>
Compatibility issues between CS5.5 & CS6.0?
created by CBH_admin <http://forums.adobe.com/people/CBH_admin> in
/Creative Suites Windows/ - View the full discussion
<http://forums.adobe.com/message/4974872#4974872

IE 7.0 Compatibility Issues

I have designed our website with Dreamweaver 6.0 and just
recentely downloaded IE 7.0 and when I go in to view our website
the whole site doesn't work. My background bleeds into the rest of
the page as you scroll or the background stays put and the rest of
the page scrolls. My links still work it is just the point of being
able to see where they are. How do I fix this compatibility issue.
I have noticed looking through other peoples forums that this is a
issue for some people. Our website is www.fairmontchamber.org if
you would like to check out what it is doing yourself. I am stumped
on how to fix this problem. Can anyone help me!!!!

DW6.0 had many strange behaviors. It would be a very good
idea for you to
update to DMX6.1 at your earliest convenience.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"fairmont chamber" <[email protected]> wrote
in message
news:f1q344$o8d$[email protected]..
>I have designed our website with Dreamweaver 6.0 and just
recentely
>downloaded
> IE 7.0 and when I go in to view our website the whole
site doesn't work.
> My
> background bleeds into the rest of the page as you
scroll or the
> background
> stays put and the rest of the page scrolls. My links
still work it is
> just the
> point of being able to see where they are. How do I fix
this
> compatibility
> issue. I have noticed looking through other peoples
forums that this is a
> issue for some people. Our website is
www.fairmontchamber.org if you
> would
> like to check out what it is doing yourself. I am
stumped on how to fix
> this
> problem. Can anyone help me!!!!
>

Advice Needed - Escalating Legria HF20/HF200 Compatibility Issues

I have tried to alert Apple Australia of the compatibility issues between the Legria HF20/HF200 and iMovie 11 now that this camcorder has been added to the Apple PAL supported camcorders list for iLife 11. There has been many posts on this compatibility issue on this Forum.
They are arguing that because the list doesn’t specifically mention the term ‘Legria’ in front of the HF20/HF200 that there is no issue. I have tried unsuccessfully to explain that there is only one version of the PAL HF20/HF200 and that is the Legria HF20/HF200, and that therefore the list must be referring to this camcorder.
Unfortunately, they aren’t accepting this view. Therefore, could somebody please advise how I can escalate this further. My motivation for doing this is purely to assist other users.
PS: I hope that this post doesn’t get deleted like the previous much longer post that I drafted. I am doing this to help others. I am not trying to cause trouble.

I also have problems with my canon legria hfr 106, which is on the supported list.
I recently discovered that I can switch the camera settings so that it records in PF25. I don´t understand the actual difference between 50i and PF25, but I tested shooting in PF25, and when I import at full original size, there are no interlacing issues. That´s a good start : - )
I´m trying now to burn with the 1080p preset using toast (haven´t had the chance to look at the result yet).
I see in your post that you loose half the resolution if you apply scaling effects. What exactly does this mean? Is it for example if you use picture in picture, Ken Burns and other effects that change the size of the clip? Does the entire project loose half the resolution, or just the clip where the effect is applied? Im sorry if this is a newbie question, but I´m not very technical.

Keynotes - compatability issues?

Hi, I hope someone can help or advice.
I am looking into possibly purchasing iWorks so that I can use Keynotes. At the moment, I use a Windows PC at work and a Mac at home. My concerns are compatability issues, so if any someone/s can answer the following questions I would be greatly appreciative:
If I produce a Keynotes presentation on my Mac, can I auto-run as a presentation on a Windows computer easily? (i.e. just run it, not edit it....etc).
Also can I link files to the presentation that can then be clicked within the slide to open in a seperate window i.e. a pdf document, and if so does this close or reduce the presentation itself?
Also I read online that Keynotes can make quite a good interactive shows that 5hit on Powerpoint as far as visuals, i.e. I need to produce an interactive CD,that will autorun on any pc/mac without issue and run a show that lists documents in pdf format that the viewer can click to view without the presentation disappearing, i.e. presenation still remains an active window behind, can this be done in keynotes, or does anyone know of any other mac or windows application that does this kind of thing?
Not sure if the above makes sense, sorry but it's difficult to explain.
Hope someone can help me, I am real keen to get Keynotes, but if it has issues with transferrring onto PC, then there is no point!

Bill,
Thanks for the help, it is greatly appreciated.
John
[email protected]
If we are to achieve results never before accomplished,
we must expect to employ methods never before attempted.
Francis Bacon

Pages to Doc Compatibility Issues

Why can't Apple/Pages fix its compatibility issues w. Word? It let's U save a file as doc. but many changes made in doc. do not take (e.g. tables, indentations, and page brakes). Why does not Pages default to the folder I open a document in when I re-save the document? Even when opening a document and making a simple change and hitting Save, Pages takes me back to the root directory. That makes no sense. Arghhh!!

Given what you described, I'm quite sure that you didn't exported the document as a .doc file where it was stored the first time.
I repeat : when you open a .doc file to edit it, it's a foreign document and the app doesn't take care of its original location. What is meaningful for it is location of files using its native format.
From my point of view, the best scheme is to work always on the native Pages document (don't re-open a file exported as .doc). If changes are required, apply them in the Pages document, save it then (and only when it's saved as Pages) export it as .doc.
When I'm forced to create a Word document from Pages, I don't use File > Export …
I don't use Share > Export.
I use Save As the way you may see on this Screenshot:
This way the default location is the one where the Pages document was saved.
The changes in the layout aren't bugs but the results of deliberate design choices.
As I wrote, the goal was not to reproduce exactly in Word the layout of the Pages document.
It was just to give something readable.
The User Guide clearly states that differences may occur.
As far as I know, when you open on a PC a document created in Word on a mac, you are not sure that it will match exactly the original design.
During the export process, documents created in Pages will loose several of the features which make Pages an interesting tool. I hate M…Soft products but, if someone is forced to exchange on regular basis with Office users, iWork isn't the tool to use. Better work with Office or with one of its free clones.
Yvan KOENIG (VALLAURIS, France) samedi 11 juin 2011 21:48:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Compatability Issues - Blank Forms

I have sent out a from with sections filled in and saved.
A client got back to me saying the form was blank, yet from my end and all the office macs, it has the correct data.
The form was created and filled out in Acrobat Pro XI
Obviously this is at their end, but how do I go about making sure there a no compatibility issues with my forms in future?
Thanks

You need to establish exactly what software is installed and used. The distinction between "installed" and "used" is important. Many people do not realise that if a PDF is viewed in a browser such as Chrome or Firefox, that these will be default IGNORE Adobe Reader even if it is installed. You cannot make a form compatible with every PDF viewer as many do not even show forms; worse, others break them.

Pioneer AVH-P1400DVD Compatibility Issue with iPhone 5

I have a Pioneer AVH-P1400DVD double-din receiver in my truck, that I've had for 2+ years now and shortly after I purchased it, T-Mobile finally started selling iPhones on their network, so I bought an iPhone 5. Well as many know, they're said to be compatible, and I can say, for at least a year and a half I never had any compatibility issues until recently.
After the iPhone 6 & 6 plus, as well as the iOS 8 launching, about 2 months later I realized that the constant unnecessary updates started taking away the compatibility between my head unit in my truck and my iPhone 5. Also, before the updates, I had no problem using a 3rd party 8-pin lightening charger/sync cable in my truck, which was much more durable than the lightening cable that Apple overcharges for, because it was double in thickness. Although the 3rd party cable I was using cost as much as the Apple 2ml cable, it wasn't too long and wasn't nearly as flimsy as the Apple 1ml.
I've researched a solution to my problem and haven't come up with anything, so my question is:
Does anybody know what the **** to do about the compatibility issues we're having? I, as well as many others, have spent entirely too much money for something that is said to work, something that did work, but now does work efficiently. For as expensive as these **** phones are and as expensive as the head units or any other electronic that is "compatible", there should be no reason for any change to the products after the initial purchase in regards to features of any sort.
WHAT IS THE FIX????????

Please read this :
https://discussions.apple.com/message/20053332?ac_cid=tw123456#20053332
Well I copyed it to you here.
Re: Anyone still having IOS 6 wifi issues?
created by mpa9366 in Using iPad - View the full discussion
Having done a lot of reading today and having found a very good online tablet magazine (will post link tomorrow) there seems to be a few tech bods onto the problem.
The magazine I was reading identified wifi problems within hours of the ios 6 release and have been analysing since then with almost daily updates - the story seems to be:
The apple authenthication transmission is normal, it should slip through event prior to a full handshake with the host network being completed - however if not authenthicated then apple will not permit the device to connect (kills the connection) this is designed to protect apple from counterfeiting. So thats problem 1 if you dont receive a token from apple.
Problem 2 is that ios 6 only supports ipv6 (the new ip protocol) whereas outside silicon valley a large proportion of routers modems etc are still ipv4 protocol.
So youre locked into ipv6 in a world where ipv4 devices are everywhere and apple have not allowed for the ability to handle both protocols. This is like GM telling you your car requires an upgrade, everything will improve etc and as part of the upgrade fits a fuel cell motor and stays silent when their upgraded vehicles are simply parked up because they cannot get fuel.
A very basic expectation would have been dual protocol handling - we know the HW supports ipv4 as all wad fine on ios5.
So its going to be hit and miss with networks - more hit than miss in techy areas like silicon valley, but more miss in places like where I am - a small town in rural Switzerland.
Only apple can fix this with a patch to enable ipv4 protocol handling.
There you go. you just need to buy a new router, I'm sure Apple has one for sale, cause it's not there fault for sure.
Wonder why people start to migrate to other devices ?

Z40-70 compatibility issue with your power management system

I noticed today that the Action Center says "Compatibility issue with your power management system." The description underneath is: Your power management system isn't working peoperly because a compatible driver is not available for this version of Windows. When I click on View message details it just says "Your computer was unable to download the solution at this time. Check to make sure your computer is connected to the Internet, and then try to download the solution again later." All power related functionalities however seem to be working. Battery is charging; battery percentage is showing; I can adjust screen brightness. I am not sure when exactly this problem started but it defenitely was not there before. Tried downloading and fixing the Power Management Software and updating BIOS. Still have the same message. System: Windows 8.1 64-bit

What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm.

A project which specifies SQL Server 2012 as the target platform may experience compatibility issues with Microsoft Azure SQL Database.

Hello
When I try to publis my asp.net application in azure, i have the next error:
>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4253,5): Warning : A project which specifies SQL Server 2012 as the target platform may experience compatibility issues with Microsoft Azure SQL Database.
>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4253,5): Warning : The project and target databases have different collation settings. Deployment errors might occur.

Hello
When I try to publis my asp.net application in azure, i have the next error:
>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4253,5): Warning : A project which specifies SQL Server 2012 as the target platform may experience compatibility issues with Microsoft Azure SQL Database.
>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4253,5): Warning : The project and target databases have different collation settings. Deployment errors might occur.
Hello,
This forum is to discuss vb.net issues, your issue is mainly regarding Azure SQL Database, I found that you have posted another thread in that forum
https://social.msdn.microsoft.com/Forums/azure/en-US/f435921a-14d1-4441-8b2b-32ba3d937aea/a-project-which-specifies-sql-server-2012-as-the-target-platform-may-experience-compatibility-issues?forum=ssdsgetstarted#f435921a-14d1-4441-8b2b-32ba3d937aea.
I would recommend you focus on that thread to get help.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Nokia Pure View 808 Headset compatibility issues

Similar Messages

Maybe you are looking for