Nokia setting wizard version 2.6.6
Dear expert of software kindly advice me to solve my problem.In my handset nokia 6630 there is setting wizard version 2.6.6 by the setting wizard i can configure email and service provider settings of wap/internet and MMS.Im from Bangladesh there is only service provider name has been star marked in the wizard but now there are 5 service provider in Bangladesh and as par instruction of help page, when i try to change service provider name i failed cause the name remain unchanged.I need to configure other provider settings by the wizard.Please help me with your expert advice.Regards,peter
Hi Adrian,
Thank you for your reply and suggestions.
I installed version 3.6.36 but the problem still occurs. I have narrowed it down though. It happens when it synchronizes the Gallery, It says "Adding 64 files to the Gallery". After it stalls for a few moments it crashes.
I have now removed the folders that where monitored under the Galery in Nokia Suite and I hope this will solve the problem.
Similar Messages
-
i have the latest version of the software version (4.) on the N73 vanilla one.........
have just notice that there is a bug in the Setting Wizard software when i choose Operator it will detect the operator then it will close down without creat the Access Point that's odd one but if i choose to Cinfigure E.mails in the Setting Wizard it will creat the Access Point but it doesn't have the the old list it has just the gmail i guess and other............. does anybody have the same poroblem too.
Thanks.Hey even I've that exact same problem!
the moment I installed new firmware in that process it already gave me all the required Settings for my SAUDI ARABIA mobile operator, mobily. And I deleted those settings and tried getting them from the Settings Wizard.. just closes without creating
Anyways for now you can request the settings online and get it on your N73
http://europe.nokia.com/link?cid=PLAIN_TEXT_228512
Nokia 5800 XpressMusic (11) [Product ID: 0559416]
V 21.0.025 (date: 02-04-2009)
network: mobily (etihad etisalat) -
N82: issue with sett. wizard
Hi All,
I'm using a black N82 with the latest FW (V20.0.062) and whenever I try to open the Sett. wizard the phone is freezing (only the wallpaper is displayed). Only a restart (by removing the battery) recovers the phone. I tried also a reset to the factory settings but the problem remains...
Anyone knows a solution to this problem?Thanks again for your prompt response.
I've never installed additional applications on my phone.
The following 'items' have gone 'into' the phone since purchase:
1. Mp3 songs.
2. Contacts via the sim directory.
3. a Powerpoint presentation via data transfer mode (nearly a month ago, but my issues with the phone surfaced a week ago....so no problem with the ppt i guess)
4. camera pics, MS outlook calender, to-do and Text messages routinely syncd between my phone and laptop.
5. Bluetooth transfer out of my phone to another phone for a transfer of pics taken.
Again many weeks ago not followed by adverse effects...
Thanks, it'll take me a while to understand SYNCML. Ill read and try to understand soon.
But then wont PC suite take care of contacts backup n restore,etc?
If so, where can i find the contacts stored in my computer and in what format?
For instance, the photos and text msgs - synced - are stored in Lifeblog folder under my documents folder and can be easily accessed via the LifeBlo application both on the phone and the computer/laptop.
PS: I also managed to update the software today, with the help of Nokia Software updater app on my laptop.
Keeping this all in mind:
I reckon, the m-card and perhaps phone memory are affected. Maybe the camera application as well.
If this is proved, i think, then i m-card format and hard reset is the way forward.
Thanks again. -
BSNL 3G not working in nokia 5800 US version
hi,
i bought a nokia 5800 US version unlocked mobile handset 10 months back. now i am using indian BSNL 3G SIM in india. my mobile handset is not detecting the bsnl 3G signal. from bsnl people i understood that their technology is 3.5G HSDPA 2100. according to gsmarena the US version supports "HSDPA 850 / 1900". is there a way to make it work with the bsnl 3G network?
voice calls, SMS and web browsing working.
Video calls, MMS, TV, etc... not working.
my mobile set has firmware version 21.2.025 date: 18-04-2009
RM - 428
updating the firmware with indian version firmware, will it help in solving the problem?
thanks and regards,
moses.http://timesofindia.indiatimes.com/business/india-business/Home-ministry-tells-DoT-to-put-3G-on-hold... If this is what you are referring to then you should open your eyes and read that article fully and not just the heading. Out of my interest in which part of the world are you living? do you have any idea about the ongoing talks about the launch of 3G services by private players and one more thing spend some time in to whatever thing you are reading and atleast try to comprehend whats been conveyed there. There was no explicit statement by DoT to hold the services given by the existing players, currently only BSNL and MTNL(Mumbai). Of course I read paper daily.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks. -
Reinstallation of the Setting Wizard Application v...
Due to a complete formatting of my Nokia N72 Memoery Card,the Setting Wizard Application got uninstalled.Will the Setting Wizard Application reinstall itself if I upgrade my Nokia N72 Firmware?
Hi,
You can try something like this
data: l_cmp_api type ref to if_wd_Component,
l_window type ref to if_wd_window,
l_view_ctlr type ref to if_wd_View_controller,
l_window_ctlr type ref to if_wd_window_controller.
l_cmp_api = wd_comp_controller->wd_get_api( ).
l_view_ctlr = wd_this->wd_get_api().
l_window_ctlr = l_view_ctlr->get_embedding_window_ctlr().
if l_window_ctlr is bound.
l_window = l_window_ctlr->get_window( ).
if l_window is bound.
l_window->set_window_title(
"please look up the parameter name and set it here.
endif.
endif.
Regards,
Satyajit. -
Configure Email from Setting Wizard
Nice to ask anymore. I love using email message from Nokia. There is Setting wizard on Nokia 6730 classic to configure email. I still remember the first time I configure Yahoo! Mail from Setting wizard, the name of incoming mail server, there was 'premium' word.... (I forgot), not 'imap.mail.yahoo.com'. With this setting, seems it receive message on time and directly. But, I'd ever reset my Nokia, I set Yahoo! Mail again from Setting wizard, it gave me uncomplete setting. I should fill myself on incoming mail server and outgoing mail server. Every time I sent there is 'accept untrusted certificate anyway?' sentence. There are 3 choices: Accept this time only, Accept permanently and Certificate detail. This setting (accept untrusted certificate) works fine for sending and receiving.
Why my Nokia doesn't want configure email like the first time I configure it (there was 'premium.nokia' word if 'm not mistake on incoming mail server)? The first time setting didn't ask accept untrusted certificate when I sent email.
NikiThank you for your reply. I just would like to know. First time I set Yahoo! Mail mailbox through Setting wizard menu from my Nokia. At that time it set automatically and completely. That I remember, the incoming mail server at time was not imap.mail.yahoo.com
With that setting when I sent an email message via email feature on my Nokia, it didn't say 'website sent untrusted certificate. Accept anyway'? Because of I'd ever reset my Nokia, of course my Yahoo! Mail setting was deleted. I set it (create new mailbox) again through Setting wizard, choose Yahoo!, fill username and password. But, the result was different and it didn't give the email setting completely, the incoming mail server and outgoing mail server are empty, so I should fill them myself. When I send an email, it always say, 'website send untrusted certificate. Accept anyway'? But, my Yahoo! Mail mailbox that I set for the first time through Setting wizard menu didn't say, 'website send untrusted certificate. Accept anyway'? Seems the first mailbox setting on Yahoo! was better.
If I create new mailbox email for Yahoo! Mail from Setting wizard, it gives me, say A type setting, it should be give me A type setting too (not B type setting) if I'd ever deleted existing Yahoo! Mail mailbox. I just would like to know whether it because of my Nokia 6730 classic system like this or something else.
Niki -
New firmware Nokia 6110 Navigator version 6.01 soo...
Hello,
I have found on a few different nokia-related-pages that is a new firmware for nokia 6110 navigator (version 6.01). no information about bugfixes, nokia service centers seem to already have it. more to come.Ok here comes the first news and bugfix list from 5.11 (and i add 4.22 infos) (i use the numbers from here: /discussions/board/message?board.id=swupdate&message.id=40488&query.id=554906#M40488 )
a nokia service center did update my phone to version 6.01.
firs of all: seems to be a again just a mini-upfate as 5.11 was.
- Nokia 6110 Navigator gets firmware 6.01 (02-09-08)
- Nokia Navigator-Program is still version 8.0.12274 (11422) as it was in 5.11, no updates, no routing towards coordinates as in newer route66mobile8 available.
- New firmware seems to get better satellite-signal (not faster, but better signal and therefore more satellites that are actually used)
- No flash lite 3.0, still 2.0
- Maybe sound quality improved in carkit-mode for the one using the phone, was not yet able to try to talk with another person
- Battery bug fixed (as in 5.11)
now concearning the other bugs:
1- could not yet try that alarm-bug
2- fixed, i hear no sound-crack
3- not fixed, volume +/- still not activated in games
4- i have no dual-sim, can not try this
5- idem
6- not fixed, deleted numbers still in protocol
7- didnt try yet
8- not yet noticed, maybe fixed
9- not yet noticed, maybe fixed
10- could not reproduce the problem
11- not yet noticed, maybe fixed
12- didnt try yet
13- flash lite 3.0 missing
14- didnt try yet
15- fixed
16- not yet noticed, maybe fixed
17- in funkwerdabendorf-carkit with bluetooth soundquality seems to be improved, but didnt yet talk with someone else on phone
18- not fixed
19- fixed
20- maybe improved now
21- didnt try yet
22- didnt try yet
23- not fixed, but might be due to the fact, that pc suite has full access during that time to the memroy, therefore musicplayer not
24- not yet noticed, maybe fixed
25- not fixed, old nokia navigator-oem/route66mobile8
26- fixed
27- no changes
28- didnt try yet
29- didnt notice that
30- no change, still rather slow
31- not yet noticed, maybe fixed
32- not fixed, flash still very greenish/blue
33- no change, button still linked to nokia navigator
34- not yet noticed, but due to the fact that it is the same version as in 5.11 and i have had the problem there too, the problem might still be there
35- didnt try yet
so here we go. you might find out too, what they fixed and what they havent fixed yet. -
Nokia N97 software version 11.X.021 released
Nokia N97 software version 11.X.021 released This software release includes significant improvements in the software stability, especially email, imaging, USB detection, widget stability and display transitions. To enable you to get the most out of your Nokia N97, the release also includes an Ovi store client. Further application updates will become available soon
After update, the issue of "when receive a call and the device is key locked, when you pick the phone it still shows that somebody calling in the screen, even after hanging up". we should reboot the phone.
I supposed this firmware fixed the problem, but I think my confiance to Nokia is decreasing -
EHS - CG36 - Import report - Set MSDS version from key file data
Hi.
This is in reference to thread EHS - CG36 - Import report - how to define MSDS version in key file?
I'm faced with the same client requirement, came across this discussion, and wondering if there was a solution to this.
I'm on ECC6.0. My client requests to retain the Version of the MSDS at the time of export (CG54 Dok-X, VER key file data) when it gets imported to another system (CG36). Example (similar to Roy's): If the reports in export system are 1.0 and 2.0, then they must be created in the import system the same, not 1.0 and 1.1.
Apparently, as Christoph has stated, the standard CG36 Import process doesn't make use of the VER key file data besides storing it into the Report's Additional Info (DMS Class charact.).
I tried to get around this via the user exit. In the IMPORT fm, I set the version/subversion of the report to be created but the C1F3 fm that does the actual report creation just ignores it. If you've done a similar approach, what have I missed? I'm also afraid if I have to clone the C1F3 fm...
I appreciate your thoughts and inputs.
Thanks in advance.
Excerpt from my fm ZC13G_DOKX_SDB_IMPORT:
FORM l_create_ibd_report...
IF e_flg_error = false.
* fill the report_head
e_report_head-subid = i_subid.
e_report_head-sbgvid = i_sbgvid.
e_report_head-langu = i_langu.
e_report_head-ehsdoccat = i_ehsdoccat.
e_report_head-valdat = sy-datum.
e_report_head-rem = i_remark.
*beg-LECK901211-ins
e_report_head-version = i_ver.
e_report_head-subversion = i_sver.
*end-LECK901211-ins
* Begin Correction 15.06.2004 745589 ***********************************
IF ( l_api_subjoin_tab[] IS INITIAL ).
* create the report
CALL FUNCTION 'C1F3_REPORT_CREATE'
EXPORTING
i_addinf = i_addinf
i_flg_header = true
i_flg_subjoin = false
IMPORTING
e_flg_lockfail = l_flg_lockfail
e_flg_error = l_flg_error
e_flg_warning = l_flg_warning
CHANGING
x_api_header = e_report_head
EXCEPTIONS
no_object_specified = 1
parameter_error = 2
OTHERS = 3.
ELSE.
Edited by: Maria Luisa Noscal on Apr 8, 2011 8:23 AMSolution is to incorporate the logic used by tc CG36VEN, that is, the process of performing a direct table ESTDH update after the new report is saved into the database.
Edited by: Maria Luisa Noscal on Apr 19, 2011 7:34 PM -
Setting plan version as default
Dear Expert,
How to setting 'plan version', for example: plan version 1 as default in tcode :
s_alr_87013613 (Plan/Actual comparison)?
What is the effect to others reports then?
Thanks in advance.The variable that is used in this report is 1VERP. You can changed this via GS12 to enter the whatever plan version to default under the default value. For your information, the report group 1AIP is run when you run the t-code S_ALRr_87013613, which inturn runs the report 1AIP-001 that incorporate the variable 1VERP under the plan data for version selection.
But this may not be the best practise, because you will be changing the SAP standard, which will be overwritten when you upload support packages or do an upgrade. Better you copy this report and use your own version variable, by copying the 1VERP. -
Maintenance Wizard Version : 1.28 - Seed Information?
Hi,
I'm using version Maintenance Wizard Version : 1.28
Specifically:
Maintenance Wizard Version : 1.28
Component Product Release ...
Applications Database Upgrade Assistant 9i : 1.20
Maintenance Pack Assistant for 11.5.10 : 1.28
Upgrade Assistant for 11.5.10 : 1.23
Applications Database Upgrade Assistant 10g : 1.12
Upgrade Assistant for 11.5.9 : 1.09
Shouldn't the option to upgrade to r12 be present under the Product field when adding a Project?
Or, am I mis-interpreting the demos ?
It also does not offer the option to utilize the AutoConfig files for Adding Node configuration information.
Could some of my Seed data be out of synch?
Any assistance is Appreciated!
MurphHi, Murph,
No, you're seeing exactly what you should be seeing on any version of the Maintenance Wizard that starts with "1." That's the OLD version (which we're trying to phase out), and is only used for upgrade to 11.5.10.2 or 10g, etc.
The new versions begin with "2.", and can be obtained by clicking on the Downloads link of note 215527.1. The new version currently contains both the R12 upgrade, and the 10g DB upgrade for Apps.
Eventually, 2.x will contain one or two additional products that were present in the old 1.x version, and at that time, the 1.x versions will be desupported.
I hope that clears it up! :-)
-Vikki
Product Manager for the Maintenance Wizard -
Grouping Sets with Version 1.1
Has anyone tried to do a query using grouping sets in version 1.1? Everytime I try I get:
Error report:
SQL Error: ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
00604. 00000 - "error occurred at recursive SQL level %s"
*Cause: An error occurred while processing a recursive SQL statement
(a statement applying to internal dictionary tables).
*Action: If the situation described in the next error on the stack
can be corrected, do so; otherwise contact Oracle Support.I can't imagine why SQL Developer would use more cursors than other tools as it is essentially just sending the sql statement to the database using jdbc. There were some problems with cursor leaks in earlier versions but I believe those were fixed.
Try this query from another session. It shows current and accumulated cursors. Run it when you start sqldeveloper, and before and after running the query.
select sid, name,value
from v$sesstat sess
inner join v$statname stat
on sess.statistic#=stat.statistic#
where sess.sid=<your session sid>
and name like 'opened%'; -
Can u tell me how to set cookie version
I want to know is there any cookie version? If yes how to set from a JSP/Servlet program
Cookie cookie = new Cookie("name","value");
cookie.setVersion(1);
will set the version of this cookie to 1 -
[svn:bz-4.0.0_fixes] 18557: Set sdk.version to 3
Revision: 18557
Revision: 18557
Author: [email protected]
Date: 2010-11-12 10:52:02 -0800 (Fri, 12 Nov 2010)
Log Message:
Set sdk.version to 3
Modified Paths:
blazeds/branches/4.0.0_fixes/build.properties -
Does the Nokia software updater version 1.4.64 sup...
Does the Nokia software updater version 1.4.64 support N85?
When I tried to update and the massage always appear "Unable to retrieve phone information" Does anyone having the same problem?
Solved!
Go to Solution.Got the same problem: Unable to retrieve phone information.
I reinstalled Nsu -> did not help. Same error.
I am using the general Profile and restarted the phone several times (plus removing battery) etc etc.
My product code is 0572856.
My custom version is 10.045.203.2 (29.09.08)
According to my phone provider there is a newer software available. I got the problem that the caller-id is not always shown when the contact is saved in the phone: When i save my second number in my n85 contacts with the international dial code, i can see the contacts name when receiving SMS only, but not if i get called from that number. When i remove the international dial code i can see the contact's name when i get called but not when i receive a SMS. I have only one contact saved in my phone (no duplicates!). Tried to move it to sim memory, to either use one memory or both memories. Nothing helps. Whether the number is from the same phone provider or not does not make any difference. I cant save both formats in one contact either.
According to my phone provider this is a known bug and can be removed by downloading the latest firmware for N85.
But i cant download anything, dont even know if there is really a newer software to download for my above mentioned version.
i tried to download nsu-versions in other languages, but that did not help too.
any help/suggestions?
Maybe you are looking for
-
I cant find my serial number to put it in my computer
could some one please help me i cant find the serial number to put in my computer that the disc requires
-
Exception when trying to update sequence numbers
I'm using TopLink 9.0.4 with Weblogic 8.1 sp2, MS SQL Server 7. I am getting an exception when Toplink attempts to update a sequence number. The SQL it produces looks good, but for some reason, the method: oracle.toplink.internal.sequencing.Sequencin
-
I have Quicktime w/ latest OS and it does not open or play any of my files
Why?
-
Apple Mail "From Field" addresses are wrong, and cached
I couldn't find the "Mail" community in the list of communities - Safari, and other standard apps were listed, just not Mail. If this is problem is in the incorrect location, please let me know where to place it - Ta Here is the problem . . . When cr
-
Upgraded to SP2. Now Crystal goes through configuration every time it is launched.
Post Author: krpurcel CA Forum: Upgrading and Licensing This morning I upgraded Crystal Report XI. First I installed SP1, then I installed SP2. The installation completed successfully. However every time I launch Crystal now it goes through its co