Nokia Software Updater -- Error 1402.Could not ope...

H,
When I try to install the Software Updater for the first time to update my Nokia 6500c phone, I receive the following error message about 57% during the install process. I checked my permission keys in the registry, and they seem to have all the correct Admin permission.
Any suggestions?
Product: Nokia Software Updater -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\Msxml2.DSOControl.4.0\CLSID. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks.
Matt

Hi,
It looks like you do not have access to the registry key mentioned i.e. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional Components\IMAIL.
This might be due to the fact that you may not be added to the Administrators group or the registry key has been denied access explicitly to a group that you may be part of.
People in my network setup were facing the same issue, and we fixed the same using Microsoft's "subinacl" tool. You can follow the below mentioned steps to rectify your issue as well:
1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
2. Install the same by double clicking on the "subinacl.msi" just downloaded.
3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
4. In the Command Prompt window, type in the following commands:
i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
ii. subinacl /subkeyreg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f /grant="Creator Owner"=f (Hit Enter)
You should see some processes happening on your screen. After the process ends, retry the update operation you were originally trying to perform. Hopefully, it should succeed now.

Similar Messages

Error 1402: Could not open key: HKEY_LOCAL_MACHINE... During Installation

Hello,
When I try to install LabView (v7.1 or v8.0) I get the following error:
"Error 1402: Could not open key:
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\LVDB.Application\CLSID. Verify that
you have sufficient access to that key, or contact your support
personnel."
I have full administrator privileges on my computer and I am able to
modify that key manually using the registry editor. When I click the
"Yes" button to continue the installation it will complete but then
when I launch LabView I get the following error:
"The requested feature is unavailable on "localhost"".
Can you help me get LabView up and running?
Thanks,

The Adobe knowledgebase article actually pointed me in the right
direction and I was able to solve the issue. Thanks to all who gave
advise, you guys are the reason these forums work!
The error message was actually coming from the Microsoft Installer, not
from anything related to National Instruments. Also, ironically, what
the message said was spot on with one exception, while I personally had
access to the registry key, the installer didn’t. What I ended up doing
was going into the registry using regedit and setting the permissions
on the key in questions such that “Everyone” had full access. After
that I uninstalled LabView then reinstalled and it worked fine this
time. The step by step follows:
1) Open the registry editor by selecting "Run" from the start menu and then typing in "regedit".
2) Browse through the registry and select the entry mentioned in the error message.
3) Choose "Permissions..." from either the edit menu or by right-clicking on the registry key's parent directory.
4) Click the "Advanced" button to add a new user.
5) Type in "Everyone" as the new user and click OK (it may not be
necessary to give everyone full control but this is what I did and it
worked).
6) Configure the permissions for user "Everyone" to "Full Control"
7) Uninstall LabView (if necessary) and re-install.
Best regards,
-Ben

Quicktime Error 1402 Could not open key (defaulticon)

When trying to install Quicktime 7 (standalone) I get the same error I have seen posted by so many others....Error 1402 Could not open key....
HKEY LOCAL MACHINE\SOFTWARE\CLASSES\QUICKTIME.QT\DEFAULTICON
I have tried every suggestion by Apple, Microsoft, the discussion fourm, and everything I have found via a Google search.
When I use regedit to view the permissions for the Quicktime.qt folder (it's not expandable so I can't locate a defaultIcon folder), I can add new users (everyone) and give them full permissions but when I select OK I get a message that says "Unable to save permissions on quicktime.qt...Access is denied).
(I am the only computer user and I am using the administrator account).
Note XP home addition.
Thanks
Anybody have any (new) ideas??????????

What happens when you delete the registry key or all the keys associated with QT?
This Microsoft article though claiming not to be for XP or 2000, has something interesting to say under Cause.
http://support.microsoft.com/kb/303089/en-us
After removing any program I clear out the registry of left over keys from it. Just something I do. I find I can still miss some. This program Windows XP Manager is very good at finding what I miss, and can also defrag the registry. It will also back up the registry for you also. You might want to take a look at it, where you problem seems to stem from the registry.
http://www.winxp-manager.com/xpmanager/index.html
Scroll down to Cleaner in the link on XP Manager, it explains what it does in the registry.

Error 1402.could not open key:UNKNOWN\MPAPI.WAPCON...

im getting this error message when i install pc suite v6.82 on windows XP. any ideas
error 1402.could not open key:UNKNOWN\MPAPI.WAPCONNServerMP.4\CLSID. Verify that you have sufficient access to that key, or contact support personel....
thanks in adv..

It sounds that there is some permission problems in your register.
Anyway, if you ignore that error message, does installation continue?

Error 1402 could not open key: unknown\graph3dctrl.graph3dctrlproxy\clsid

Hi,
I've got the following error during the installation of labview 7.0 student edition on my PC that works with XP.
The error is :
"error 1402 could not open key: unknown\graph3dctrl.graph3dctrlproxy\clsid verify that you have sufficient access to that key"
I have the administrator right on my PC and I seek the key on registry and it doesn't exist at all.
I already have installed successfully the Labview 6.i student edition. I tried to uninstall all national application and reinstall the labview 7.0 but same error appear.
My opinion is that the key cannot be opened because it doesn't exist.
What can I do to install the new labview 7.0?
Attachments:
Labview 7 installation error.jpg ‏22 KB

Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao!
Attachments:
msi.doc ‏32 KB

Nokia Software Updater - Error 1720

Hi, I would be very grateful if anyone could help with the following problem:
I have downloaded Nokia PC Suite - this works fine..
When I try to download Nokia Software Updater, I receive the following error:
"Error 1720: There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action Kill_process error -2147217407, : Line 5, Column 1, "
Could anyone please advise what I can do. (I am not very technical - so any basic advice would be appreciated!)
I am using Windows XP - Home edition. I have a Nokia 5800
Thank you

If you experience behavior such as application errors or scripts that used to work are no longer working, you may have a corrupted WMI repository. To fix a corrupted WMI repository, you have to reinstall WMI. Follow these steps:
For Windows XP Service Pack 2
Click Start, Run and type the following command:
rundll32 wbemupgd, UpgradeRepository
This command is used to detect and repair a corrupted WMI Repository. The results are stored in the setup.log (%windir%\system32\wbem\logs\setup.log) file.

ERROR 1402 Could Not Open Key:

Having Problems loading QUICKTIME. There was an older version but was deleted a while ago. I have used the Windows Install Clean Up. but still get 'ERROR CODE 1402 COULD NOT OPEN KEY' "HKEYLOCALMACHINE\Software\Microsoft\Windows\Current Version\Uninstall\Quicktime. Verify that you have sufficent access to that key, or contact your support personnel." I have gone to that file, and cannot do anything to that key. PLEASE HELP!!!

ttt, same problem. please help.

I get an Error 1402 Could not open key: and the update fails. How do I fix this problem. Please Help

ERROR 1402. Could Not Open Key: HKEY_LOCAL_MAHINE\SOFTWARE\MICROSOFT\WINDOWS\CURRENT VERSION\RUN\OPTIONAL COMPONENTS\IMAIL

You could try using the Windows Installer Cleanup Utility to remove all traces of any existing versions of Reader prior to installing the version you want and updating it as required. This utility is no longer supported by Microsoft because it can conflict with Win 7, but you can still find it in sites like http://majorgeeks.com/download.php?det=4459

Acrobat Updater keeps failing...shows error 1402 (Could not open key). Why?

I bought Acrobat Pro XI, but keep getting an error 1402 when trying to update. Why?

update manually, Adobe - Acrobat : For Windows
if that fails with the same error, check if you have more than one installation of acrobat and/or reader causing a problem.

Error 1402- could not open key....??? wat???

Y cant i install the itunes software on my windows xp. the error says:
Error 1402. Could not open key: HKEYLOCALMACHINE\Software\classes\.cdda\OpenWithProgids.
Verify that you have sufficient accessto that key, or contact your support personnel.
I have no idea what that means and i have no idea what to do...i jst bought an ipod nano, i used to have an ipod shuffle and the software used to work fine. But one day it stoped working and i could not instal it agen without this error.
no i Have the updated itunes/ipod nano cd and it still wont install coz of that error...
PLEASE HELP!

First goto the control panel>add and remove and remove/uninstall BOTH itunes and qquicktime. DIsable your antivirus and download then reinstall the latest iTUnes from apple.com
If this does not work for you, goto the PC makers site and download ALL updates especailly patches for iTUnes they offer for your model.
Still not working, goto this link and follow all the steps they recommend http://docs.info.apple.com/article.html?artnum=93976
After doing all this it still doesn't install you will have to alter your registry by going to the link below, only do this after trying everything else out http://docs.info.apple.com/article.html?artnum=93865

Apple Software Update error- "Entry Point not found"

I have had Apple Software Update/ iTunes on my PC for over 4 years. Today, randomly, when I went to update iTunes to the new 10.5 version, Software Update did not prompt me to update. That was odd, but I didn't realize anything was amiss yet at this point.
In iTunes, I went Help > Check for Updates which indicated the new version was downloaded. When promted whether I'd like to update, I hit yes, which even more oddly took me to apple.com to download iTunes all over again. (Normally, updates download from within iTunes and it's an update, not a full hour-long re-download.)
I didn't want to redownload iTunes (what would happen to all of my previously downloaded apps and music, set playlists?) so I opened Software Update, and got the following error message:
SoftwareUpdate.exe - Entry Point Not Found
The procedure entry point ?CreateProductsFromXML@CSUCatalogObject@@QAEXP6AIPAXIIJ@ZOIV?@CStringT@WV?$StrT raitMFC@WV?ChTraitsCRT@W@ATL@@@@@ATL@@@Z could not be located in the dynamic link library SoftwareUpdateFiles.dll
Strange, right?
So my questions.
1.) Does anyone know why Apple Software Update would suddenly get errors? I've used it recently (this past weekend?) and everything was fine.
2.) Is there a way to fix Software Update, since I'll surely need it in the future.
3.) In the meantime, should I proceed with re-downloading the full version of iTunes again, and will it mess up anything I currently have in my iTunes library? Would I need to back it up or do anything to help ensure there are no further problems?
Thanks for your help. To say I'm confused is an understatement!

Well... after I posted this, some info from other posts came up and I found the answer!
In case anyone has the same issue that runs across this... this worked for me perfectly.
Correct Answer by Sposivo on Aug 19, 2011 5:23 PM
"Start, Control Panel, Add & Remove Programs, Apple Software Update, Change, Repair" - this fixed it for me.
See the answer in context

IPod Nano 7th gen - software update error and now not functioning

Hello,
I recently plugged an older 7th gen iPod Nano that I hadn't used in a while into my computer (Windows 7 operating system) and iTunes wanted me to let it update its software. I said 'yes,' not really thining anything of it, and as the software update was taking place, an 'unexpected error' occurred. Now my iPod will not turn on or respond or anything. It shut off while plugged into the computer and has stayed off and I am unable to get it to turn back on. It is totally dead, like the failed update somehow ruined my iPod.
The iPod itself was a little damaged - the LCD touchscreen was nonfunctioning due to water damage, and only displayed a white screen when on, but I could still 'shake to shuffle' and it would play all of my music just fine. Now the iPod will not work at all.
Is there anything that can be done or am I just out of luck here? Did the fact that the iPod was damaged have something to do with the failed update?
I'm kind of bummed 'cause the iPod still played my music perfectly....
Thanks for any help or insights anybody can give.

I should add 2 important points: 1) I have no trouble syncing with my PC, just in updating the nano software, and (2) Buried in some Apple reference I found mention of problems if the nano isn't formatted for a PC vs. Mac. It gives info on how to tell what the format is, but it's outdated (the menu choices are different). I believe it is already formatted for a PC because of an entry under Settings/About which says the Version is "1.0 PC". Tell me if I'm wrong. Also, it would help me if I knew the destination of the software download. Does it download directly to the Nano or to a temporary folder on my PC?

Acrobat Pro won't install: Error 1402: Could not open key on install attempt

I've been stuck in install hell for the past week. Here's my issue: I have Adobe Creative Suite 3 Design Premium and want to install it on a PC running MS Vista, but when I attempt an install, I cannot install Adobe Acrobat 8.
Reading the event viewer, I get the following type error:
Product: Adobe Acrobat 8 Professional -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8AD0743E-113B-4E26-BA21-1E9A71098F41}\InprocSe rver32. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Here's the problem: I'm basically playing whack-a-mole. Each time I go into regedit to change the registry permission for the named folder and attempt to install again, I get a new error saying that the Adobe install software could not open some other key. Each install attempt takes 15-20 min, and I must have done this 20+ times over the past week.
I've done all the obvious things like uninstalling everything Adobe (including my browsers Flash plug-in), running the CS3Clean software, running Vista in selective start-up, running setup as an administrator, barking at the moon, ect.
All the affected permission issues some to reside in the CLSID folder, but there is no way for me to set the permissions there and have them apply to all the subfolders without getting some sort of "whatever, we do what we want" error.
I'm at my wits end here. I've posted this to the Adobe customer support page, and four days after the supposed 25 hour turn-around, I still have yet to hear from Adobe. Any help would certainly be appreciated.

i suggest a best way to solve this maan,
follow this,
create a new administrator user on your xp,
log off current user n log on to new admin user,
install yr program,
and
log off this admin user n log on to previous user,
n continue to use yr installed program
tahts it
wave
cihan

TS3694 an error message showed after verifying updates: error phone could not be updated code 6. What to do?

After backing up and updating phone top window showed updated verified commplete.
then it displayed a message sayng phone could not be updatede error 6.
Please help.

http://support.apple.com/kb/TS3694#error6
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Error 1402: Could not open key UNKNOWN\SliderCtrl.SlideCtrlProxy\CLSID

I have two users. User A wrote an application using LabVIEW 7.1, including an installer, and gave said application and installer to User B. User B has 8.0 and 8.1 LabVIEW RTE's installed properly. When trying to run the application installer, or just the 7.1 RTE installer alone, the following error occurs every time:
Error 1402. Could not open key:
UNKNOWN\SlideCtrl.SlideCtrlProxy\CLSID
I took the registry info from my machine (had 7.1 installed on it at one time; currently has 8.2 and 8.5), exported everything with "SlideCtrl" in it, imported those into User B's registry, double checked the permission in the appropriate places, re-ran ... same problem. Help?
Certified LabVIEW Developer
NI-VLM Administrator

I found the answer on my own, documenting for the next poor soul ... this was under WinXP
* Go into regedt32
* Right-click on HKCR and select "Permissions" -OR- Click on HKCR and choose Edit->Permissions
* Add the current user and set permissions for Full Control and Read.
It is NOT sufficient to give "Everyone" Full Control and Read, it needs that user id. Brilliant ... current user is not part of "Everyone".
Certified LabVIEW Developer
NI-VLM Administrator

Nokia Software Updater -- Error 1402.Could not ope...

Similar Messages

Maybe you are looking for