Nokia stealing in the name of waranty extension

Dear all,<br>On the 25 of may 2014 I extended my phones Lumia 520 warranty by visiting Akshay Nokia Care Centre, fc road ,puna, bharat. But to my suprise after few days my phone started showing out of waranty status , also if I visit nokia care it shows out of warranty. They charged me for waranty extension but it did not changed anything. Now if I want even minor servicing anywhere else in the country, they charge me. I want my money back as the waranty is not extended. Also I need compensation for the money I had to spend and troubles I gad to undergo due to this stealing and cheating by Nokia.

U must b having sm proof of 'warranty extension'.. Show it to them.. If still any issue, then knock consumer court.. These big brands can't cheat consumers like this.. I m also facing issue with 'double tapp', bt Nokia care is unable to find, where d problem is.. Each time they just reinstall windows, which has never been d solution.. Now I m thinking 2 sell it..

Similar Messages

Get_application_property(current_form) returns the name with .fmx extension

Hi
We are using Forms 10g. [Forms [32 Bit] Version 10.1.2.0.2 (Production)]
When i use get_application_property(current_form) to get the current forms to get the name of the file. It works perfect.
Ex: When i use this in a form "Employee_master", it returns EMPLOYEE_MASTER. (i.e. with the extention .fmx)
In the same form, if i have a button, which opens another form "Department_master" using the code
open_form('department_master', activate, session, no_share_library_data, pl_id);
once the department_master form is opened and if i use get_application_property(current_form), then it returns department_master.fmx
Why is this difference?
Thanks in advance.

Look at the file name stored on your operating system. the first file form is probably stored on your hard drive as EMPLOYEE_MASTER.fmb and EMPLOYEE_MASTER.fmx. The other form is probably stored as department_master.fmb and department_master.fmx.
The get_application_property(current_form) is returning the form name in what ever case the file is stored on your hard drive as.
Hope this helps,
Travis

Need help on name of an extension.

I can't remember the name of an extension I had, maybe some one knows the name. The extension was one where when I clicked on a new tab, I could customize the tab page with short cuts to my favorite sites from a list of sites or type in my own. I anyone knows what this extension could be, please let me know.

hello wolfinator, it would also be possible to do this in firefox without an extension. you can drag and drop sites from your bookmarks or history onto the new tab page - then they will be pinned there for future use...
[[New Tab Page – show, hide and customize top sites]]

Problem Create ANE,ArgumentError: Error #3500: The extension context does not have a method with the name

I little confuse about build ANE, I already follow all the direction, but the error always #3500 when I try to call the ANE.
I create ANE using java android.
The tools I use : Flash Builder running on Win-64 win.7. I think I must straight to the point, here what i made it first step by step;
1. I create the JAVA application first, with package senigo.extension.android then I create 3 file, Sample.java, SampleContext.java, PassTextFunction.java
Sample.Java Source Code
package senigo.extension.android;
import android.util.Log;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREExtension;
public class Sample implements FREExtension {
@Override
public FREContext createContext(String arg0) {
// TODO Auto-generated method stub
Log.i("Sample", "createContext");
return new SampleContext();
@Override
public void dispose() {
// TODO Auto-generated method stub
Log.i("Sample", "Dispose");
@Override
public void initialize() {
// TODO Auto-generated method stub
Log.i("Sample", "Initialize");
SampleContext.Java Source Code
package senigo.extension.android;
import java.util.HashMap;
import java.util.Map;
import android.util.Log;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREFunction;
public class SampleContext extends FREContext {
public SampleContext()
Log.i("SampleContext", "constructor");
@Override
public void dispose() {
// TODO Auto-generated method stub
Log.i("SampleContext", "dispose");
@Override
public Map<String, FREFunction> getFunctions() {
// TODO Auto-generated method stub
Log.i("SampleContext", "getFunctions");
Map<String, FREFunction> functionMap = new HashMap<String, FREFunction>();
functionMap.put("passText", new PassTextFunction());
return functionMap;
PassTextFunction.Java Source Code
package senigo.extension.android;
import com.adobe.fre.FREContext;
import com.adobe.fre.FREExtension;
import com.adobe.fre.FREFunction;
import com.adobe.fre.FREObject;
public class PassTextFunction implements FREFunction {
@Override
public FREObject call(FREContext arg0, FREObject[] arg1) {
// TODO Auto-generated method stub
FREObject result = null;
try{
result = FREObject.newObject("Hello World");
}catch(Exception e)
return result;
after all the file I create the jar file using click right on the tree view >> Export >> Jar File >> Sample.Jar (i already create jar file that just contain the src folder and after i frustrated, i create .jar file contain all the whole project folder but still didn't work out).
Ok, After that I create project Flex Library Project, That's contain the actionscript to call the native and the extension.xml, here the code.
Test.as Source Code, FYI : i already create public function and the static function the error still same #3500.
package senigo.extension.android
import flash.external.ExtensionContext;
public class test
private static var extContext:ExtensionContext = null;
public function test()
trace ("Test Constructor");
if (!extContext)
initExtension();
public static function get passText():String
trace ("Test Pass Text");
if (!extContext)
initExtension();
return extContext.call("passText") as String;
private static function initExtension():void
trace ("Vibration Constructor: Create an extension context");
extContext = ExtensionContext.createExtensionContext("senigo.extension.android", null);
extension.xml source code
FYI: in Flex when i put the Native Extension, they said must have Windows-x86 so I already create 3 ANE, that just contain Android-ARM , Contain Android-ARM and Default, Contain Android-ARM,Default and Windows-x86 but the error still same. I didn't got it where is the error.
<extension xmlns="http://ns.adobe.com/air/extension/3.1">
<id>senigo.extension.android</id>
<versionNumber>1.0.0</versionNumber>
<platforms>
<platform name="Android-ARM">
<applicationDeployment>
<nativeLibrary>Sample.jar</nativeLibrary>
<initializer>senigo.extension.android.Sample</initializer>
<finalizer>senigo.extension.android.Sample</finalizer>
</applicationDeployment>
</platform>

<platform name="default">
<applicationDeployment/>
</platform>
</platforms>
</extension>
After I create it, I copy the .swc file and extension file sample with the Sample.jar file.
I extract the .swc file, copy the library.swf to folder Android-ARM,Default,Windows-86 and I create build.bat that contain the command like this
adt -package -storetype PKCS12 -keystore senigo.p12 -storepass l10nk1ng -target ane senigo.extension.android.ane extension.xml -swc AndroidLib.swc -platform Android-ARM -C ./Android-ARM/ . -platform default -C ./default/ .
the I put the ane to Flex mobile project that I created:
I run it but got error #3500, I really confuse?? what's wrong with my code? is there something I wrong or I Miss it?
Please any one help me.. and when is already ane file can I debug it in Flex Mobile Project? I wanna looks the log.i code that i wrote but i confuse how to looking up in flash builder.
at the end, I wanna said Sorry if my english not very goods, and thanks, because wanna see my problem and thank you very much if You can gave me a solution's

Alex Rekish wrote:
Why you comment Windows-x86 in your extension.xml ?
I think that is a problem. You launch your application on Windows but ANE haven't got Windows-x86 implementation (also you don't include it while packaging). So your application use default implementation. But default implementation don't use any native code and cannot use ExtensionContext. And you got error.
If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation.
Thanks for you answer Alex Rekish, Sorry I didn't screen shoot all about the extension.xml. I comment it because the latest ANE that I build is contain Android-ARM and default. so I commented. but I already try it using just ANE that's just contain Android-ARM, with Android-ARM and windows-x86,and Android-ARM, and default, and Android-ARM,default,Windows-x86 the error still the same.
here the screen shoot, I embeded the ane that's i contain Windows-x86
in action script test.as I didn't change it anythings, I just play it on extension.xml to build the ane. is there any mistake over there? I interact with your answer that "If you don't need Windows-x86 native implementation than you need implement default implementation that different than Android-ARM. You don't need to use ExtensionContext in default implementation." I didn't need to user ExtensionContext? is means? in the actionscript? or in extension.xml? can you explained

How do I get .jpg extension to show in the name of my imported photos?

How do I get .jpg extension to show in the name of my imported photos?

Need to have Mail running. When you receive new mail, it will show up in Notifications Center UNLESS the Mail window has focus.
The Notifications Center preferences are in System Preferences / Notifications.

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension ".wmv" at the end of the name. The required extension is ".webarchive" --if I save it this way, i just get a web address rather than the wmv

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension “.wmv” at the end of the name. The required extension is “.webarchive” --if I save it this way, i just get a web address rather than the wmv

Find the URL for the WMV, paste it into Safari's address bar, and press the Option and Enter keys.
(66873)

How to set the name for an 'unknown' file extension?

Specifics:
I have various file extensions that are recognized by my mac. I would like to know how to create a list of applications that can open it so I do not get a 'There is no Default Application to open this file' error. I would also like to be able to give these file extensions names recognized by the mac.
Just like .txt is a "Textedit Document" and .html is a "HTML Document," I'd like to be able to change the name and assosication of a file and give it its own .icns if possible.
As for the default applications, I know how to set a default application. However, if a mac does not recognize a file extension, adding a new default application to run the file wil actually erase the old one, which is a big pain, especially when your file can be opened with ANY text editor.
I understand that this may involve hacking into the operating system's databases, but if anyone can help, it would be greatly appreciated.

Hi Timo,
My jdev version is 10.1.3.3.0, this is for R12. By PR i mean to say process request and PFR process form request in the controller.
In the Process request of the controller, i am finding the checkbox bean and assigning the firepartialaction for it.
Later in the process form request for the fired event, i am trying to handle the rendered property of the messagetextinput. Is this a right approach?
my code below
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OAMessageCheckBoxBean oamessagecheckboxbean = (OAMessageCheckBoxBean)oawebbean.findChildRecursive("X_FLAG");
if(oamessagecheckboxbean != null)
oapagecontext.writeDiagnostics(this, "Message check box Bean found:", 1);
FirePartialAction firepartialaction = new FirePartialAction("change");
oamessagecheckboxbean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firepartialaction);
oamessagecheckboxbean.setFireActionForSubmit("change", null, null, true);
oapagecontext.writeDiagnostics(this, "setting fire event", 1);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
oapagecontext.writeDiagnostics(this, "Inside Process Form Request", 1);
if("change".equals(oapagecontext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAMessageTextInputBean bean = (OAMessageTextInputBean)oawebbean.findChildRecursive("X_NUMBER");
if(bean!=null){
bean.setRendered(Boolean.TRUE);}
Thanks,
Malar

Assign the name of a file and its extension when using DESTYPE=MAIL

Hello,
I've developed a report running Oracle Reports 10g that is being emailed to a user. I would like to specify the name of the file and it's extension that is attached. Are there variables or parameters in Oracle Reports that I can use to accomplish this?
It looks like by default that the file name is using the Name value found in the Property Inspector for the report. I have not been able to find a way to re-assign this value with a value from either the input or select values in the data model.
Will Oracle Reports 10g allow me to define the name of the file and the extension?
Any help or direction would be greatly appreciated.
Thanks in advance
Jesse
Message was edited by:
Sutherland

Thank you for the quick reply and information. I almost thought you had solved my problem until I found out that distribution and bursting do not support delimited and spreadsheet output. One of the two files I need to email has a desformat of SPREADSHEET.
Is there any other way to manipulate the file name and extension when using destype of MAIL?

FileSaveService ignored the file name and file extensions

I am using the JNLP API to build a JWS application. When using the FileSaveService, I found it automaticlly ignored the file name and file extensions I passed to the 'FileSaveService.saveFileDialog()'.
My code is like the following:
String[] xtns = {"csv"};
FileContents fileContents = fileSaveService.saveFileDialog(
".", xtns, stream, "testFile"); Im running this application in JRE version 1.6.0_20-b02 in Windows XP.
Although in the JNLP API, it said the file name and file extension 'might be ignored by the JNLP client', I still wonder if anyone has a better solution for this?
Thanks very much :)

Sean.Wang wrote:
..I still wonder if anyone has a better solution for this?Visit [http://pscode.org/jws/api.html#fs]. Click the link to the 'Launch File Service (sandboxed) demo'. Type some characters into the text area then activate the 'Save File' button. Do you get a file chooser that defaults to (.zzz) extension?
Then if yes, and that is a 'better solution' for you, then yes, I have one. The code of the demo. can be downloaded at a link just to the right of the launch link.

How to Capture the File Names of any extension using ssis

Hello,
Can you please let me know on how to Capture the File Names of any extension(EG : xls,text,.csv etc) at a time and stores in excel file using SSIS?
Any help would be appreciated.
Thanks,
Vinay s

If you need to act differently on each file type separately or if not all types of files are wanted, i.e. the Filespecifier cannot be *.* in the Foreach loop:
In the ssis package
make 3 variables:
to store the file extension, e.g. User::CurrentExtension of type string
to store the filename found in the directory: @CurrentFilename
to store the name of the directory where the files reside e.g. User::CurrentDirectory
make a foreach loop of type Foreach Item enumerator:
in the items list you add each file extension that you need
txt
csv
xls
xlsx
As Variable mappings map the CurrentExtension to Index 0
Inside this foreach loop add another foreach loop of type Foreach File enumerator, in the collection Expressions
add Expression Directory , set to @[User::CurrentDirecotry]
add Expression FileSpec, set to "*." + @[User::CurrentFileExtension]
In the Variable mappings, map Variable user::CurrentFilename to Index 0
Inside this loop use Execute SQL Task to insert the filename in a Excel connection.
Jan D'Hondt - SQL server BI development

What Is Usually the Name or Extension Name of an Object Code File in Xcode 4.2?

Hi. I'm relearning how to program and I'd like to know each term I encounter as much as possible. What's usually the name or extension name of an object source code file in the Navigator (the pane on the left) in XCode 4.2? Thank you in advance & advanced merry Christmas.
Gbu.

Xcode 4 User Guide ; Xcode Basics Help ; Xcode Release Notes
Happy Holidays

Cisco Unity 7: Voice mail cann't get the name or Number phone of the caller

Hi,
I have installed Cisco Unity Messaging Unified version 7 and integrated with Exchange 2010.
I have two scenario, and I want to know if are normal or not:
1. If the 2 IP phones are subscribed with Cisco Unity: the first IP phone call the other IP phone and let a voice mail. When the second IP phone check his message vocal it can get the name of the caller or his number phone (the message is: You have One message from XXXX) and he get e-mail as objet: Voice Mail from XXXX.
2. If one IP phone is not subscriber with cisco unity call other Ip phone subscribed with cisco unity and let him a voice mail. The second IP phone when check his message vocal it can’t get the name of the caller or his number phone: The message is: You have one voice mail xxxx; without indicate from!! and he get a e-mail as object: Voice mail from Unknown.
Please, I want to know if the second scenario is normal ? if not, who to resolve this problem? I want that he indicate the number of caller same he isn't subscriber with cisco unity?
Thanks a lot,
Best regards,
Omar YUNSI

So for the 2nd scenerio you would want to check what your Message Subjects were set to. For Unity 7 open Web SA, click Configuration and then Message Subjects. Make sure that the Outside Caller Message has %CALLERID% in it somewhere. The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
Try setting the Outside Caller Message to:
%U% %P% Voice Message from %CALLERID%
and that should get you your desired results.
The default Message subject is:
%U% %P% Voice Message from %CALLERNAME% (%CALLERID%). So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
Bryan

The name 'InitializeControl' does not exist in the current context

Hi ,
i try to run my visual web part in vs2012,without adding any code to template i deploy web part into sharepoint2013.
but i got below error
The name 'InitializeControl' does not exist in the current context.how can i solve this error
Thanks,
Madhu.

Here's my ASCX file that breaks the code generation:
<%@ Assembly Name="$SharePoint.Project.AssemblyFullName$" %>
<%@ Assembly Name="Microsoft.Web.CommandUI, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="Utilities" Namespace="Microsoft.SharePoint.Utilities" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Register Tagprefix="asp" Namespace="System.Web.UI" Assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" %>
<%@ Import Namespace="Microsoft.SharePoint" %>
<%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="VisualWebPart1.ascx.cs" Inherits="Ensol.ViewAttachmentsWP2.VisualWebPart1.VisualWebPart1" %>
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
<asp:Repeater ID="Repeater1" runat="server">
<HeaderTemplate>
<table>
</HeaderTemplate>
<ItemTemplate>
<tr>
<td><a href="<%# Eval("FileUrl") %>"><%# Eval("FileName") %></a></td>
<td><asp:LinkButton ID="LinkButton1" runat="server" CommandArgument="<%# Eval("FileName") %>" OnClick="LinkButton1_Click">Delete</asp:LinkButton></td>
</tr>
</ItemTemplate>
<FooterTemplate>
</table>
</FooterTemplate>
</asp:Repeater>
</ContentTemplate>
</asp:UpdatePanel>
No matter what I've tried to do with my webpart, the VS still generates an ASCX.G.CS file with no content at all. What I'm doing wrong?

How do I remove an advertising program by the name of SmartSuggestor? I cant find it in the ad ons and I cant find it in my add remove programs on my pc.

I keep getting these stupid ads that are apparently from smartsuggestor but I cant find the program anywhere on my pc then I contacted the company and they tell me that it is a firefox issue yet i cant find it in the firefox settings either. I went into the Smart Suggestor site and the name of the extension/program came up as "No extension Found". I cant find anything that even resembles anything to do with the program at all not in the add remove program through control panel or through the extension plug ins area in firefox and was wondering if anyone else has had the same problem.
I did not download this crap then all of a sudden I am plagued with pop up adds and other sorts of advertising all stemming from this bloody Smart Suggestor. I have got myself a good pc cleaner along with a few Malware removers and also upgraded my security programming but nothing will either find nor rid my pc of this problem. I have downloaded and reinstalled a fresh copy of Firefox and I am still having the same issue, has anyone else gone through this and how can I get rid of this problem?

Do a malware check with several malware scanning programs on the Windows computer.<br>
Please scan with all programs because each program detects different malware.<br>
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How do i upload an image to a server and put the name into a database table

Ok, i found a php image upload script that im using for a cms
image gallery on my site. But for it to work the way i need to i
have to have certain information submited into a mysql table at the
same time. I could just make it so the user types the name of the
image in a second form, but i would rather not have to as it seems
a clumsy way to do things and opens things up to typos etc.
So, i can upload the image ok, and i can upload data to the
table, but i dont know what I have to do so that the name of the
uploaded file is automaticly inserted into the mysql table.
The first bit of code below is the form I am using to upload
the file to the server. The second bit of code is what I am using
to tell the server what the file name is.
How do I combine the 2 form into one? Please help. It is
driving me to dispair.
Attach Code
<form enctype="multipart/form-data" action="uploader.php"
method="POST">
<input type="hidden" name="MAX_FILE_SIZE" value="500000"
/>
Choose a file to upload: <input name="uploadedfile"
type="file" />
<br />
<input type="submit" value="Upload File" />
</form>
<form action="<?php echo $editFormAction; ?>"
method="post" name="form2" id="form2">
<table align="center">
<tr valign="baseline">
<td nowrap="nowrap" align="right">Image One</td>
<td><input type="text" name="kingsImage1"
value="<?php echo
htmlentities($row_rskingscentre['kingsImage1'], ENT_COMPAT,
'UTF-8'); ?>" size="32" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right">Image Two</td>
<td><input type="text" name="kingsImage2"
value="<?php echo
htmlentities($row_rskingscentre['kingsImage2'], ENT_COMPAT,
'UTF-8'); ?>" size="32" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right">Image
Three</td>
<td><input type="text" name="kingsImage3"
value="<?php echo
htmlentities($row_rskingscentre['kingsImage3'], ENT_COMPAT,
'UTF-8'); ?>" size="32" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap"
align="right"> </td>
<td><input type="submit" value="Update record"
/></td>
</tr>
</table>
<p> </p>
<p>
<input type="hidden" name="MM_update" value="form2" />
<input type="hidden" name="kingsHeader" value="<?php
echo $row_rskingscentre['kingsHeader']; ?>" />
</p>
</form>

jeffoirecoupe1234 wrote:
> Ok, i found a php image upload script that im using for
a cms image gallery on
> my site. But for it to work the way i need to i have to
have certain
> information submited into a mysql table at the same
time. I could just make it
> so the user types the name of the image in a second
form, but i would rather
> not have to as it seems a clumsy way to do things and
opens things up to typos
> etc.
>
> So, i can upload the image ok, and i can upload data to
the table, but i dont
> know what I have to do so that the name of the uploaded
file is automaticly
> inserted into the mysql table.
>
> The first bit of code below is the form I am using to
upload the file to the
> server. The second bit of code is what I am using to
tell the server what the
> file name is.
>
> How do I combine the 2 form into one? Please help. It is
driving me to dispair.
>
> Attach Code
>
> <form enctype="multipart/form-data"
action="uploader.php" method="POST">
> <input type="hidden" name="MAX_FILE_SIZE"
value="500000" />
> Choose a file to upload: <input name="uploadedfile"
type="file" />
> <br />
> <input type="submit" value="Upload File" />
> </form>
>
> <form action="<?php echo $editFormAction; ?>"
method="post" name="form2"
> id="form2">
> <table align="center">
> <tr valign="baseline">
> <td nowrap="nowrap" align="right">Image
One</td>
> <td><input type="text" name="kingsImage1"
value="<?php echo
> htmlentities($row_rskingscentre['kingsImage1'],
ENT_COMPAT, 'UTF-8'); ?>"
> size="32" /></td>
> </tr>
> <tr valign="baseline">
> <td nowrap="nowrap" align="right">Image
Two</td>
> <td><input type="text" name="kingsImage2"
value="<?php echo
> htmlentities($row_rskingscentre['kingsImage2'],
ENT_COMPAT, 'UTF-8'); ?>"
> size="32" /></td>
> </tr>
> <tr valign="baseline">
> <td nowrap="nowrap" align="right">Image
Three</td>
> <td><input type="text" name="kingsImage3"
value="<?php echo
> htmlentities($row_rskingscentre['kingsImage3'],
ENT_COMPAT, 'UTF-8'); ?>"
> size="32" /></td>
> </tr>
> <tr valign="baseline">
> <td nowrap="nowrap"
align="right"> </td>
> <td><input type="submit" value="Update record"
/></td>
> </tr>
> </table>
> <p> </p>
> <p>
> <input type="hidden" name="MM_update" value="form2"
/>
> <input type="hidden" name="kingsHeader"
value="<?php echo
> $row_rskingscentre['kingsHeader']; ?>" />
> </p>
> </form>
>
>
>
Hi Jeff:
Though this does not show you how to solve this issue via a
code
snippett, there are a couple of extensions at WebAssist.com
that enable
you to do this, they are Data Assist and Digital File Pro.
When you have
time, take a look at these Solution Recipes (tutorials) that
show how
DataAssist is used and then now Digital File Pro is used in
conjunction
with DataAssist:
http://www.webassist.com/professional/products/solutionrecipe/Media_139.asp
http://www.webassist.com/professional/products/solutionrecipe/Media_112.asp
DataAssist can be used to save time when you need to build
database
search and management applications quickly, and Digital File
Pro can be
used to include file upload functionality to your form fields
while
enabling you to insert your server file name into the
database, all on
the same page.
enthusiastically,
mark haynes

Nokia stealing in the name of waranty extension

Similar Messages

Maybe you are looking for