Nokia Suite 3.6 clears pre installed map data from...

I had a problem with Nokia Suite clearing pre-installed maps from my new Pureview 808 and E5-00. The first time I let Nokia Suite 3.6 check for outdated maps, it reported that over 700MB worth of maps needed updating.
I didn't think much of the time taken but after maybe 5 minutes connection was lost and so were the preinstalled maps. Nokia Care didn't help as they said it was a PC or internet problem.
I also noticed in Nokia Suite 3.6 that the country Thaliand is missing from my installation of the suite for Pureview 808. However the country is there inside my phone's map loader. Thailand is present inside Nokia Suite when I connect my E5 to Nokia Suite 3.6.
Can anyone tell me what the pre installed maps in the phones are?

@wkl12mr
It depends upon the product code of the device as to which maps are pre-installed upon Mass memory of 808 as this determines localisation.
Presumably your 808 is running Nokia Maps v3.09_12wk09_b05 and if you use "Maploader" from within Nokia Maps application is not Thailand listed as per screenshot?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

How to transfer pre instaled maps

My N95 came with a 1gb memory card with full uk maps pre installed. I also bought a 4gb memory card and need to know how to transfer the pre installed maps from the 1gb card to the 4gb card any help much appreciated.

Hi vinty
I would suggest enable "show hidden and system files" on your PC and put 1Gb card in card reader and copy contents to new folder on desktop; after formatting 4Gb card transfer contents from newly made folder.
Happy to have helped forum in a small way with a Support Ratio = 37.0

I deleted the pre-installed iPhoto app from my iPhone 5s by mistake. And I can't find the same app in the App Store. How do I recover it?

I deleted the pre-installed iPhoto app from my iPhone 5s by mistake. And I can't find the same app in the App Store. How do I recover it?

iPhoto for iOS is no longer being offered by Apple and has been replaced by the Photos app. It is not compatible with iOS 8. This Apple document may help: Migrating from iPhoto for iOS to Photos on iOS 8 - Apple Support

Removing Pre-installed Video Games from iPod

Does anyone know how to remove the pre-installed video games from the iPod nano? many thanks.

They're written into the iPod's firmware and can't be removed.
(53535)

Have a combobox pre-filled using data from database

What would be a recommended method to have a combobox
pre-filled using data from database?

You can load an Array with the data returned from your
database and bind to that array as the dataProvider for the
comboBox.
[Bindable]
private var myArrayDP:Array = new Array();
//Load the array with your returned data.
<mx:ComboBox dataProvider="{this.myArrayDP}">
</mx:ComboBox>
Using an ArrayCollection however is often better if you want
changes to the dataProvider to automatically reflect in the
ComboBox.

Removing complete Challan Mapping data from system

Dear Consultants,
My client has entered erroneous data for challan mapping. When I checked the data, I found that there is some difference in the Challan amount & available amount. It means there are some employees mapped for these challans. but the main page of CMAP shows employees mapped = 0. When I tried to delete the challan data, system says, there are some employees mapped to these challans.
When on the last node of CMAP, I tried to select all employees on the right hand & click on the arrow from right to left, no amount of challans was changed.
May I know how to delete the entire mapping data from the system?
regards,
Bindumadhav

Dear MVR,
The reply by Mr.Deepak is as follows. :
Dear,
Regarding your query, the issue reported by you basically happens due to inconsistent mapping or unmapping of the employees to the Challan.
We would suggest you to kindly delete of the negative entry from the table 'T7INTE'. You also need to delete the entries from the table PCL4 as well for the corresponding challan for which the negative entry has been created. Performing the above suggested steps will remove the reported inconsistencies. After deleting the entries completely, kindly perform the Challan mapping for the employees again. Please make sure that you are not deleting the entry from the table for which Form24Q
has already been generated. The deletion process can be explained as such:
1. Execute the transaction 'se16'. Go to the tables mentioned above. You can execute the table 'T7INTE' with the TAN number. On execution, a negative entry will be displayed for a particular challan. Select that entry and delete of the entry from the table.
2. Go to table PCL4. Execute the table with relid as 'I1' to 'I2' and the TAN number in the field 'SRTFskindly performing the mapping action again. Hopefully, following the above mentioned steps will resolve the reported inconsistency and you will be able to perform the mapping successfully.
Best Regards,
Deepak..
I can see some entries. But the system does not allow me to delete the table entry from T7INTE & PCL4.
Regards,
Bindumadhav

Nokia Suite version 3.4.49 install problems

HI - I wonder if someone can help at all please?
I'm trying to install Nokia Suite version 3.4.49 on a new Win XP laptop (no previous install of the Nokia Suite on this laptop) - which I initially had a problem as the installer appeared to hang for more than 24 hours.
I found a previous solution which suggested there was a missing DLL, and could be resolved by installing Windows Media Player 11 - the install now appears to get to 100% (on the progress bar), though the message still shows the text 'Installing Nokia Suite, this may take a few minutes'.
The right hand panel continues to refresh with the features and description content.
Are there any logfiles I can check or use to help diagnose this?
Many thanks
Kevin
Solved!
Go to Solution.

I have managed to download 3.5.14 Beta, and the installer gets to a similar point (firstly to report that an installation is suspended, and did I want to undo the changes made previously? To which I responded yes, but the new install of the 3.5.14B version is approx 50% and not making additional progress :-(
I've restarted, run a couple of registry cleans/checks etc but still not able to install Nokia Suite (I've also uninstalled all other Nokia apps too) - so now I have none at all.

TS1702 pre installed Maps software is not showing directions as it was showing previously , how to resolve this issue

A pre installed software , Maps , not showing direction between two locations , as it was showing previously , it can't be removed even , since pre installed , plz help how to resolve this issue , regards

Not all features are available in all countries. This article explains:
http://www.apple.com/ios/feature-availability/

Nokia Suite does NOT restore apps installed in e: ...

Just proved this on the 808, and previously on the 700.
It backs them up but it doesn't restore them.
Apps installed on C: (which is a stupid thing to do because c: space is so limited on most Nokias) get backed up and restored OK.
Apps installed on E: get backed up but don't get restored. Their config tends to get restored, and when they are re-downloaded (assuming you can still download it and the .sis has not had its certificate expired) and reinstalled on E: their icons appear in their original place on the screen.
This is a big weakness of the Nokia Suite, because given the rate at which apps are disappearing from the Symbian scene, a lot of people will find they can't recover their backups.
I wonder if a separate backup of E: would solve this?

hi mate,
you can leave feature feedback over at Nokia Beta Labs, as they have just pushed out a beta of the next version of Nokia Suite: http://betalabs.nokia.com

How do I remove the pre-installed O2 software from...

I've just taken delivery of a brand new Nokia 6220 Classic from an eBay seller. Although the box, manuals, CD etc are generic/non-network branded, when I switch the phone on, it's full of O2 software, logos, splash screens, etc. (O2 is one of the major networks here in the UK). This all happens despite that fact that I've not yet put a SIM card into the phone.
What I want to do is to reset the phone so that it is identical to one that had never had O2 software installed, so that it is just like a true generic/non-network branded phone that's sold in places like the Carphone Warehouse (a major high-street mobile chain here in the UK).
Does anyone know if it's possible to do this, and if so, how?
The SIM card I'll be using with the phone is a Vodafone Pay As You Go card, although I may be switching to an ASDA Pay As You Go card. ASDA is a large supermarket chain owned by Wal-Mart. Their phone network is a "virtual" one - they don't have any network hardware, they simply offer a rebranded Vodafone service, which is cheaper than Vodafone itself.
Many thanks in advance for any help anyone can offer.
(Please also see my topic in the "PC and Mac Software" section asking which version of PC Suite I need to use to transfer text messages & pictures from my 6610 to my 6220 Classic. Thanks.)
Solved!
Go to Solution.

After some initial forays into getting the firmware changed, I decided in the end that it would be just far too time-consuming, expensive & difficult to seriously consider getting it done, so I ended up selling the phone & buying another one that had generic firmware.
Just to clarify for anyone reading this thread - the box, manuals & CD that came with my original 6220 classic were the generic/non-network branded versions, but the firmware on the phone was the O2 version. This is not the same as the phone being locked to the O2 network.
What does having O2 firmware on a 6220 classic mean in practical terms?
It means that as well as all the standard Nokia menus & features, there are additional O2 ones. The phone in use is effectively dual-brand.
When you start up the phone, you get the Nokia "joining hands" animation, followed by an "O2 Welcome" one. When the phone has finished starting up, the default "theme" on the phone (which is easily changed) is the O2 one - blue gradient wallpaper with bubbles running up & down the left hand edge. The bottom right hand corner of the screen says "O2", meaning that you're supposed to press the top right button on the keypad to access O2-specific features. There's a couple of O2 contacts in the address book, and there's a "Goodbye" O2 animation before the Nokia logo appears when you switch the phone off.
I made several phone calls to both Nokia & O2. The end result of all my fact-finding was that in order to get the firmware changed legally, without invalidating the warranty, I'd have had to persuade O2 to sell me written permission, and a "restriction code", to have the firmware changed - as per the previous replies in this thread. There was no guarantee that they would be prepared to do this. Even if they were prepared to, this would likely have taken many weeks and cost a fortune (3 figures) and even then it might have been difficult to persuade a Nokia dealer to do the actual firmware change.
My final phone call to O2 on this subject was with an African gentleman whose command of English was decidedly dubious, who had never even heard of firmware alterations, who took half an hour to get his head round what I wanted to do, and whose final piece of advice to me, when he couldn't provide the correct O2 phone number for the relevant department, was to try searching for it on Google!
Given all this, I'm sure you can understand that despite me losing a lot of money in the process, I was better off selling the phone & buying another one.
The moral of the story is to check what sort of firmware is on a phone before you buy it, or even better yet, avoid buying mobile phones on eBay in the first place! I actually bought & paid for 5 different phones from eBay in the end before I received the final one that I was reasonably happy with, but that's another long & sad story...

How do I manually install map data on a X6 please?

Can't get it to work.
Got the zip, phone doesn't find the copied on maps.
Please help.
Martin
Solved!
Go to Solution.

@MJI1962
Assuming by the timeline of this post compared to other thread that this issue now resolved as you have marked as solved there:/t5/Maps-Navigation-and-GPS/Trying-to-update-maps-and-downloads-failing/m-p/1112049/message-uid/1112...
Happy to have helped forum with a Support Ratio = 42.5

Install ical data from iphone 5 to MAC OS 10.8.5?

My calander contents were wiped out by iCloud and I do not want to use iCloud at all!
The events are still in my iphone and they are in a fairly recent back up from my MAC.
Is there a way to move my events from iPhone to MAC? or
Should I just re-install events from my MAC backup and then manually add the events that are missing?
THANKS

Can't anyone help with this?????

Mapping data from two subrecords

Hi
I have a problem with a simple mapping. The source and the target are given. See image for more details:
http://www.flickr.com/photos/38594397@N03/3548820512/sizes/o/
The problem is that when the second subrecord is not fillt the data of the second record will be mapped with the first one. For that i have another image which explains that better:
http://www.flickr.com/photos/38594397@N03/3548010457/sizes/o/
I couldn't find something to map this correct.
Thanks
Ronny

Hi,
This might be a case of incorrect use of the contexts.
Please refer this blog to understand contexts better.
/people/riyaz.sayyad/blog/2006/04/23/introduction-to-context-handling-in-message-mapping
Regards,
ravi

Map data from class CL_PT_REQ_WF_ATTRIBS with workflow

Hi All,
I am using the standard class CL_PT_REQ_WF_ATTRIBS with DUMMY method for approval workitem which uses webdynpro ABAP. The webdynpro person is passing one variable RESULT after the approval, and RESULT with its value is shown in the log but there is no workflow container element named RESULT in the workflow. so, I created one with that name. But when I use this vaiable in the task after mapping, it is not showing any value. Am I missing something or doing anything wrong?

Hi
After creating the container element in Approve Leave request Task did you try to refresh the buffer and Refresh Org assignement.
And also make sur ethat the webdynpro developer is writing back the decision to Approve Leave request Task
and also make sure you do a proper bidning between Task container to workflow container. Check in the workflow log whteher in atleast the task container the value is populate. Also please let us know how the webdynpro developer is assigning the result value is it something like he is using SAP_WAPI_WRITE_CONTAINER function module then make sure that the container element is CAse Sensitive. so ask him to define as you decalred in the task/workflow container.
Regards
Pavan
Edited by: Pavan Bhamidipati on May 17, 2011 2:18 PM
Edited by: Pavan Bhamidipati on May 17, 2011 2:18 PM
Edited by: Pavan Bhamidipati on May 17, 2011 2:19 PM

Mapping date from DDMMYYYY to InfoObject (MMYYYY)

hi,
I extract a date field (DDMMYYYY) from a DataSource. I should map this Field to a Infoobject 0CALMONTH (MMYYYY).
How can i do this??
regards
sunny

hi,
thanx for reply. I need the Conversion in Start- Routine before i map the field.
i get items from DS like
doc number| pos number| date______|value
1000_____|__10_______| 01.02.2009 | 100
1000_____|__10_______| 02.02.2009 | 150
1000_____|__10_______| 01.03.2009 | 200
1000_____|__10_______| 02.03.2009 | 300
i must consilidate the delta for each month.
doc number| pos number| date______|delta
1000_____|__10_______| 02.2009___| 50
1000_____|__10_______| 03.2009___| 100
When i get a Before and after image, i must calculate the delta and looks whether already exists a delta for this month.
Therefore i need the conversion.

Nokia Suite 3.6 clears pre installed map data from...

Similar Messages

Maybe you are looking for